-- *******************************************************************
-- CISCO-LWAPP-HA-MIB.my :
-- Jan 2012, Gayathri
--   
-- Copyright (c) 2017-2018 by Cisco Systems, Inc.
-- All rights reserved.
-- *******************************************************************

CISCO-LWAPP-HA-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    NOTIFICATION-TYPE,
    OBJECT-TYPE,
    Unsigned32,
    Integer32
        FROM SNMPv2-SMI
    OBJECT-GROUP,
    NOTIFICATION-GROUP,
    MODULE-COMPLIANCE
        FROM SNMPv2-CONF
    Counter32
        FROM SNMPv2-SMI
    TruthValue,
    MacAddress,
    RowStatus
        FROM SNMPv2-TC
    InetAddressType,
    InetAddress
        FROM INET-ADDRESS-MIB
    SnmpAdminString
        FROM SNMP-FRAMEWORK-MIB
    sysName
        FROM RFC1213-MIB
    cRFStatusPeerUnitState,
    cRFStatusUnitState
        FROM CISCO-RF-MIB
    ciscoMgmt
        FROM CISCO-SMI;


-- ********************************************************************
-- *  MODULE IDENTITY
-- ********************************************************************

ciscoLwappHaMIB MODULE-IDENTITY
    LAST-UPDATED    "201703140000Z"
    ORGANIZATION    "Cisco Systems Inc."
    CONTACT-INFO
            "Cisco Systems,
            Customer Service
            Postal: 170 West Tasman Drive
            San Jose, CA  95134
            USA
            Tel: +1 800 553-NETS

            Email: cs-wnbu-snmp@cisco.com"
    DESCRIPTION
        "This MIB is intended to be implemented on all those
        devices operating as Central controllers, that
        terminate the Light Weight Access Point Protocol
        tunnel from Cisco Light-weight LWAPP Access Points.

        This MIB is used to show and configure High 
        availability (HA) related statistics.

        The relationship between CC and the LWAPP APs
        can be depicted as follows:

          +......+     +......+     +......+          
          +      +     +      +     +      +           
          +  CC  +     +  CC  +     +  CC  +           
          +      +     +      +     +      +           
          +......+     +......+     +......+           
            ..            .             .                 
            ..            .             .                 
           .  .            .             .                 
          .    .            .             .                 
         .      .            .             .                 
        .        .            .             .                 
        +......+ +......+     +......+      +......+          
        +      + +      +     +      +      +      +         
        +  AP  + +  AP  +     +  AP  +      +  AP  +          
        +      + +      +     +      +      +      +          
        +......+ +......+     +......+      +......+          
             .              .             .                 
            .  .              .             .                 
           .    .              .             .                 
          .      .              .             .                 
         .        .              .             .                 
        +......+ +......+     +......+      +......+          
        +      + +      +     +      +      +      +          
        +  MN  + +  MN  +     +  MN  +      +  MN  +          
        +      + +      +     +      +      +      +          
        +......+ +......+     +......+      +......+          


        The LWAPP tunnel exists between the controller and
        the APs.  The MNs communicate with the APs through
        the protocol defined by the 802.11 standard.

        LWAPP APs, upon bootup, discover and join one of the
        controllers and the controller pushes the configuration,
        that includes the WLAN parameters, to the LWAPP APs.
        The APs then encapsulate all the 802.11 frames from
        wireless clients inside LWAPP frames and forward
        the LWAPP frames to the controller.

                               GLOSSARY

        Access Point ( AP )

        An entity that contains an 802.11 medium access
        control ( MAC ) and physical layer ( PHY ) interface
        and provides access to the distribution services via
        the wireless medium for associated clients.  

        LWAPP APs encapsulate all the 802.11 frames in
        LWAPP frames and sends them to the controller to which
        it is logically connected.

        Central Controller ( CC )

        The central entity that terminates the LWAPP protocol
        tunnel from the LWAPP APs.  Throughout this MIB,
        this entity also referred to as 'controller'. 

        Light Weight Access Point Protocol ( LWAPP ) 

        This is a generic protocol that defines the 
        communication between the Access Points and the
        Central Controller.

        Mobile Node ( MN )

        A roaming 802.11 wireless device in a wireless
        network associated with an access point. Mobile Node,
        Mobile Station(Ms) and client are used interchangeably. 

        REFERENCE

        [1] Wireless LAN Medium Access Control ( MAC ) and
        Physical Layer ( PHY ) Specifications.

        [2] Draft-obara-capwap-lwapp-00.txt, IETF Light 
        Weight Access Point Protocol."
    REVISION        "201703140000Z"
    DESCRIPTION
        "Initial version of this MIB module."
    ::= { ciscoMgmt 843 }


ciscoLwappHaMIBNotifs  OBJECT IDENTIFIER
    ::= { ciscoLwappHaMIB 0 }

ciscoLwappHaMIBObjects  OBJECT IDENTIFIER
    ::= { ciscoLwappHaMIB 1 }

ciscoLwappHaMIBConform  OBJECT IDENTIFIER
    ::= { ciscoLwappHaMIB 2 }

ciscoLwappHaGlobalConfig  OBJECT IDENTIFIER
    ::= { ciscoLwappHaMIBObjects 1 }

ciscoLwappHaNetworkConfig  OBJECT IDENTIFIER
    ::= { ciscoLwappHaMIBObjects 2 }

ciscoLwappHaNotificationVariable  OBJECT IDENTIFIER
    ::= { ciscoLwappHaMIBObjects 3 }

ciscoLwappHaPeerStatisticsVariable  OBJECT IDENTIFIER
    ::= { ciscoLwappHaMIBObjects 4 }

ciscoLwappHaStatisticsVariable  OBJECT IDENTIFIER
    ::= { ciscoLwappHaMIBObjects 5 }

ciscoLwappHaSystemStatistics  OBJECT IDENTIFIER
    ::= { ciscoLwappHaPeerStatisticsVariable 1 }

ciscoLwappHaCpuStatistics  OBJECT IDENTIFIER
    ::= { ciscoLwappHaSystemStatistics 1 }

ciscoLwappHaPowerSupplyStatistics  OBJECT IDENTIFIER
    ::= { ciscoLwappHaSystemStatistics 2 }

ciscoLwappHaMemoryStatistics  OBJECT IDENTIFIER
    ::= { ciscoLwappHaSystemStatistics 3 }


-- *************************************************
-- HA Global Config
-- *************************************************

cLHaApSsoConfig OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the value of redundancy mode
        statefull switch over (SSO).
        A value of 'true' indicates that, redundancy mode SSO 
        is enabled. 
        A value of 'false' indicates that, redundancy mode SSO 
        is disabled."
    DEFVAL          { false } 
    ::= { ciscoLwappHaGlobalConfig 1 }

cLHaPeerIpAddressType OBJECT-TYPE
    SYNTAX          InetAddressType
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the peer WLC IP address
        type." 
    ::= { ciscoLwappHaGlobalConfig 2 }

cLHaPeerIpAddress OBJECT-TYPE
    SYNTAX          InetAddress
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the peer WLC IP address." 
    ::= { ciscoLwappHaGlobalConfig 3 }

cLHaServicePortPeerIpAddressType OBJECT-TYPE
    SYNTAX          InetAddressType
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the peer WLC service port IP
        address type." 
    ::= { ciscoLwappHaGlobalConfig 4 }

cLHaServicePortPeerIpAddress OBJECT-TYPE
    SYNTAX          InetAddress
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the peer WLC service port IP
        address." 
    ::= { ciscoLwappHaGlobalConfig 5 }

cLHaServicePortPeerIpNetMaskType OBJECT-TYPE
    SYNTAX          InetAddressType
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the peer WLC service port net
        mask IP type." 
    ::= { ciscoLwappHaGlobalConfig 6 }

cLHaServicePortPeerIpNetMask OBJECT-TYPE
    SYNTAX          InetAddress
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the peer WLC service port
        net mask IP address." 
    ::= { ciscoLwappHaGlobalConfig 7 }

cLHaRedundancyIpAddressType OBJECT-TYPE
    SYNTAX          InetAddressType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the peer WLC redundancy management
        interface IP address type." 
    ::= { ciscoLwappHaGlobalConfig 8 }

cLHaRedundancyIpAddress OBJECT-TYPE
    SYNTAX          InetAddress
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the peer WLC redundancy management
        interface IP address." 
    ::= { ciscoLwappHaGlobalConfig 9 }

cLHaPeerMacAddress OBJECT-TYPE
    SYNTAX          MacAddress
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the peer WLC mac
        address." 
    ::= { ciscoLwappHaGlobalConfig 10 }

cLHaVirtualMacAddress OBJECT-TYPE
    SYNTAX          MacAddress
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies the peer WLC mobility
        MAC address." 
    ::= { ciscoLwappHaGlobalConfig 11 }

cLHaPrimaryUnit OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies whether this is the primary
        or secondary unit. 
        A value of 'true' indicates that, this unit is the 
        primary unit. 
        A value of 'false' indicates that, this unit is the 
        secondary unit."
    DEFVAL          { false } 
    ::= { ciscoLwappHaGlobalConfig 12 }

cLHaLinkEncryption OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies whether link encryption is
        enabled or disabled.
        WLC should be rebooted for the changed value 
        to take effect.
        A value of 'true' indicates that, link encryption
        will be enabled on the controller, on next reboot. 
        A value of 'false' indicates that, link encryption
        will be disabled on the controller, on next reboot."
    DEFVAL          { true } 
    ::= { ciscoLwappHaGlobalConfig 13 }

cLHaNetworkFailOver OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies whether network failover is
        enabled or disabled.
        A value of 'true' indicates that, network failover
        is enabled.
        A value of 'false' indicates that, network failover
        is disabled."
    DEFVAL          { false } 
    ::= { ciscoLwappHaGlobalConfig 14 }

cLHaRFStatusUnitIp OBJECT-TYPE
    SYNTAX          InetAddress
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the peer IP address
        when Redundancy Framwork(RF) state of active/peer 
        unit changes." 
    ::= { ciscoLwappHaGlobalConfig 15 }

cLHaKATimeout OBJECT-TYPE
    SYNTAX          Unsigned32
    UNITS           "milliseconds"
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies keep alive timeout value in milli
        seconds between 100 and 1000. The value for this object 
        configured in multiples of 50."
    DEFVAL          { 100 } 
    ::= { ciscoLwappHaGlobalConfig 16 }

cLHaKARetryCount OBJECT-TYPE
    SYNTAX          Unsigned32 (3..10)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies keep alive retry count and
        The value for this object configured between 3 and
        10."
    DEFVAL          { 3 } 
    ::= { ciscoLwappHaGlobalConfig 17 }

cLHaGwRetryCount OBJECT-TYPE
    SYNTAX          Unsigned32 (6..12)
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies default gateway reachability retry
        count and The value for this object configured between 6 
        and 12."
    DEFVAL          { 12 } 
    ::= { ciscoLwappHaGlobalConfig 18 }

cLHaPeerSearchTimeout OBJECT-TYPE
    SYNTAX          Unsigned32 (60..300)
    UNITS           "seconds"
    MAX-ACCESS      read-write
    STATUS          current
    DESCRIPTION
        "This object specifies peer search timeout and
        The value for this object configured between 60 
        and 300 seconds."
    DEFVAL          { 200 } 
    ::= { ciscoLwappHaGlobalConfig 19 }

cLHaRFStatusUnitIpType OBJECT-TYPE
    SYNTAX          InetAddressType
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object specifies the peer IP address type
        when redundancy framwork(RF) state of active/peer unit 
        changes." 
    ::= { ciscoLwappHaGlobalConfig 20 }

-- ********************************************************************
-- cLHaNeworkRoutePeerTable
-- ********************************************************************

cLHaNetworkRoutePeerConfigTable OBJECT-TYPE
    SYNTAX          SEQUENCE OF CLHaNetworkRoutePeerConfigEntry 
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This table represents the peer network route
        entries."
    ::= { ciscoLwappHaNetworkConfig 1 }

cLHaNetworkRoutePeerConfigEntry OBJECT-TYPE
    SYNTAX          CLHaNetworkRoutePeerConfigEntry
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "Each entry contains configuration of peer network
        route."
    INDEX           {
                        cLHaNetworkRoutePeerIPAddressType,
                        cLHaNetworkRoutePeerIPAddress
                    } 
    ::= { cLHaNetworkRoutePeerConfigTable 1 }

CLHaNetworkRoutePeerConfigEntry ::= SEQUENCE {
        cLHaNetworkRoutePeerIPAddressType  InetAddressType,
        cLHaNetworkRoutePeerIPAddress      InetAddress,
        cLHaNetworkRoutePeerIPNetmaskType  InetAddressType,
        cLHaNetworkRoutePeerIPNetmask      InetAddress,
        cLHaNetworkRoutePeerGatewayType    InetAddressType,
        cLHaNetworkRoutePeerGateway        InetAddress,
        cLHaNetworkRoutePeerTransferStatus INTEGER,
        cLHaNetworkRoutePeerRowStatus      RowStatus
}

cLHaNetworkRoutePeerIPAddressType OBJECT-TYPE
    SYNTAX          InetAddressType
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object represents peer network route
        IP address type." 
    ::= { cLHaNetworkRoutePeerConfigEntry 1 }

cLHaNetworkRoutePeerIPAddress OBJECT-TYPE
    SYNTAX          InetAddress
    MAX-ACCESS      not-accessible
    STATUS          current
    DESCRIPTION
        "This object represents peer network route
        IP address." 
    ::= { cLHaNetworkRoutePeerConfigEntry 2 }

cLHaNetworkRoutePeerIPNetmaskType OBJECT-TYPE
    SYNTAX          InetAddressType
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object specifies peer network route
        IP netmask type." 
    ::= { cLHaNetworkRoutePeerConfigEntry 3 }

cLHaNetworkRoutePeerIPNetmask OBJECT-TYPE
    SYNTAX          InetAddress
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object specifies peer network route
        IP netmask." 
    ::= { cLHaNetworkRoutePeerConfigEntry 4 }

cLHaNetworkRoutePeerGatewayType OBJECT-TYPE
    SYNTAX          InetAddressType
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object represents peer network route
        gateway IP type." 
    ::= { cLHaNetworkRoutePeerConfigEntry 5 }

cLHaNetworkRoutePeerGateway OBJECT-TYPE
    SYNTAX          InetAddress
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object specifies peer network route
        gateway IP address." 
    ::= { cLHaNetworkRoutePeerConfigEntry 6 }

cLHaNetworkRoutePeerTransferStatus OBJECT-TYPE
    SYNTAX          INTEGER  {
                        initiate(1),
                        inProgress(2),
                        success(3),
                        failure(4),
                        timeout(5)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents peer network route transfer
        status.
        A value of initiate(1) indicates that, network route 
        transfer initiated.
        A value of inProgress(2) indicates that, network route 
        transfer in progress.
        A value of success(3) indicates that, network route 
        transfer success.
        A value of failure(4) indicates that, network route 
        transfer failure.
        A value of timeout(5) indicates that  network route 
        transfer time out." 
    ::= { cLHaNetworkRoutePeerConfigEntry 7 }

cLHaNetworkRoutePeerRowStatus OBJECT-TYPE
    SYNTAX          RowStatus
    MAX-ACCESS      read-create
    STATUS          current
    DESCRIPTION
        "This object specifies status column for this row
        and used to create and delete specific instances
        of rows in this table." 
    ::= { cLHaNetworkRoutePeerConfigEntry 8 }
 
-- ********************************************************************
-- *    Peer Statistics Variable
-- ********************************************************************

cLHaAllCpuUsage OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the all CPUs usage
        of peer."
    DEFVAL          { "" } 
    ::= { ciscoLwappHaCpuStatistics 1 }

cLHaPowerSupply1Present OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents whether peer switch power
        Supply 1 is enabled or disabled. 
        A value of 'true' indicates that, peer switch 
        power supply 1 is enabled. 
        A value of 'false' indicates that, peer switch power
        supply 1 is disabled."
    DEFVAL          { false } 
    ::= { ciscoLwappHaPowerSupplyStatistics 1 }

cLHaPowerSupply1Operational OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents whether peer switch power
        supply 1 operational or not. 
        A value of 'true' indicates that, peer switch power
        supply 1 operational is enabled. 
        A value of 'false' indicates that, peer switch power
        supply 1 operational is disabled."
    DEFVAL          { false } 
    ::= { ciscoLwappHaPowerSupplyStatistics 2 }

cLHaPowerSupply2Present OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents whether peer switch power
        supply 2 is enabled or disabled. 
        A value of 'true' indicates that, peer switch power
        supply 2 is enabled. 
        A value of 'false' indicates that, peer switch power
        supply 2 is disabled."
    DEFVAL          { false } 
    ::= { ciscoLwappHaPowerSupplyStatistics 3 }

cLHaPowerSupply2Operational OBJECT-TYPE
    SYNTAX          TruthValue
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents whether Peer switch power
        Supply 2 operational or not. 
        A value of 'true' indicates that, peer switch power
        supply 2 operational is enabled. 
        A value of 'false' indicates that, peer switch power
        supply 2 operational is disabled."
    DEFVAL          { false } 
    ::= { ciscoLwappHaPowerSupplyStatistics 4 }

cLHaTotalSystemMemory OBJECT-TYPE
    SYNTAX          Integer32
    UNITS           "KBytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the total system memory in Kbytes."
    DEFVAL          { 0 } 
    ::= { ciscoLwappHaMemoryStatistics 1 }

cLHaFreeSystemMemory OBJECT-TYPE
    SYNTAX          Integer32
    UNITS           "KBytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the free system memory in Kbytes."
    DEFVAL          { 0 } 
    ::= { ciscoLwappHaMemoryStatistics 2 }

cLHaUsedSystemMemory OBJECT-TYPE
    SYNTAX          Integer32
    UNITS           "KBytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the used system memory in Kbytes."
    DEFVAL          { 0 } 
    ::= { ciscoLwappHaMemoryStatistics 3 }

cLHaAllocatedFromRtos OBJECT-TYPE
    SYNTAX          Integer32
    UNITS           "KBytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the number of bytes allocated
        from RTOS in Kbytes."
    DEFVAL          { 0 } 
    ::= { ciscoLwappHaMemoryStatistics 4 }

cLHaChunksFree OBJECT-TYPE
    SYNTAX          Integer32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the number of free chunks."
    DEFVAL          { 0 } 
    ::= { ciscoLwappHaMemoryStatistics 5 }

cLHaMmappedRegions OBJECT-TYPE
    SYNTAX          Integer32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the number of memory mapped regions."
    DEFVAL          { 0 } 
    ::= { ciscoLwappHaMemoryStatistics 6 }

cLHaSpaceInMmappedRegions OBJECT-TYPE
    SYNTAX          Integer32
    UNITS           "KBytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the space in the memory mapped
        regions in Kbytes."
    DEFVAL          { 0 } 
    ::= { ciscoLwappHaMemoryStatistics 7 }

cLHaTotalAllocatedSpace OBJECT-TYPE
    SYNTAX          Integer32
    UNITS           "KBytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the total allocated space
        in Kbytes."
    DEFVAL          { 0 } 
    ::= { ciscoLwappHaMemoryStatistics 8 }

cLHaTotalNotInUseSpace OBJECT-TYPE
    SYNTAX          Integer32
    UNITS           "KBytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the total space not in-use in Kbytes."
    DEFVAL          { 0 } 
    ::= { ciscoLwappHaMemoryStatistics 9 }

cLHaTopMostReleasableSpace OBJECT-TYPE
    SYNTAX          Integer32
    UNITS           "KBytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the top most releasable space
        in Kbytes."
    DEFVAL          { 0 } 
    ::= { ciscoLwappHaMemoryStatistics 10 }

cLHaTotalAllocatedInclMmap OBJECT-TYPE
    SYNTAX          Integer32
    UNITS           "KBytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the total memory allocated including
        memory map in Kbytes."
    DEFVAL          { 0 } 
    ::= { ciscoLwappHaMemoryStatistics 11 }

cLHaTotalUsedMmap OBJECT-TYPE
    SYNTAX          Integer32
    UNITS           "KBytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the total memory in-use including
        memory map in Kbytes."
    DEFVAL          { 0 } 
    ::= { ciscoLwappHaMemoryStatistics 12 }

cLHaTotalFreeInclMmap OBJECT-TYPE
    SYNTAX          Integer32
    UNITS           "KBytes"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the total free memory including
        memory map in Kbytes."
    DEFVAL          { 0 } 
    ::= { ciscoLwappHaMemoryStatistics 13 }

-- ********************************************************************
-- *    HA statistics Variable
-- ********************************************************************

cLHaAvgPeerReachLatency OBJECT-TYPE
    SYNTAX          Integer32
    UNITS           "Microseconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents average value of peer controller
        reachable latency in micro seconds."
    DEFVAL          { 0 } 
    ::= { ciscoLwappHaStatisticsVariable 1 }

cLHaAvgGwReachLatency OBJECT-TYPE
    SYNTAX          Integer32
    UNITS           "Microseconds"
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents average value of default gate
        way reachable latency in micro seconds."
    DEFVAL          { 0 } 
    ::= { ciscoLwappHaStatisticsVariable 2 }

cLHaBulkSyncStatus OBJECT-TYPE
    SYNTAX          SnmpAdminString
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents current status of bulk sync."
    DEFVAL          { "" } 
    ::= { ciscoLwappHaStatisticsVariable 3 }

-- ********************************************************************
-- *    NOTIFICATION Variable
-- ********************************************************************

cLHaSecondaryControllerUsageTrapType OBJECT-TYPE
    SYNTAX          INTEGER  {
                        usageStart(1),
                        usageComplete(2),
                        overUsage(3)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the usage of secondary controller.
        After the usuage of 90 days, one trap is generated per 
        day for over usage.
        A value of usageStart(1) indicates that, start of secondary 
        controller usage.
        A value of usageComplete(2) indicates, that completion of 
        secondary controller usage period of 90 days.
        A value of overUsage(3) indicates that, Secondary controller 
        overusage." 
    ::= { ciscoLwappHaNotificationVariable 1 }

cLHaSecondaryControllerUsageDayCounter OBJECT-TYPE
    SYNTAX          Counter32
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the number of days the
        secondary controller is used." 
    ::= { ciscoLwappHaNotificationVariable 2 }

cLHaBulkSyncCompleteEvent OBJECT-TYPE
    SYNTAX          INTEGER  {
                        bulkSyncComplete(1)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents the time when the bulksync
        was complete." 
    ::= { ciscoLwappHaNotificationVariable 3 }

cLHaPeerHotStandbyEvent OBJECT-TYPE
    SYNTAX          INTEGER  {
                        haPeerHotstandby(1)
                    }
    MAX-ACCESS      read-only
    STATUS          current
    DESCRIPTION
        "This object represents that the peer has turned hot-standby." 
    ::= { ciscoLwappHaNotificationVariable 4 }

cLHaSecondaryControllerUsageTrap NOTIFICATION-TYPE
    OBJECTS         {
                        cLHaSecondaryControllerUsageTrapType,
                        cLHaSecondaryControllerUsageDayCounter,
                        sysName
                    }
    STATUS          current
    DESCRIPTION
        "This notification is sent on the event of a generic failure
        between the active and peer unit."
   ::= { ciscoLwappHaMIBNotifs 1 }

cLHaRFSwapInfoTrap NOTIFICATION-TYPE
    OBJECTS         {
                        cLHaRFStatusUnitIp,
                        cRFStatusUnitState,
                        cLHaPeerIpAddress,
                        cRFStatusPeerUnitState
                    }
    STATUS          current
    DESCRIPTION
        "The notification is sent by the active redundant
        unit whenever its RF state changes or the RF state of the peer
        unit changes.

        To avoid a flurry of notifications for all state transitions,
        notifications will only be sent for transitions to the
        following RF states:
            disabled (for the peer state)
            standbyCold
            standbyHot
            active
            activeExtraload."
   ::= { ciscoLwappHaMIBNotifs 2 }

cLHaBulkSyncCompleteTrap NOTIFICATION-TYPE
    OBJECTS         { cLHaBulkSyncCompleteEvent }
    STATUS          current
    DESCRIPTION
        "The notification is sent by the active redundant
        unit whenever the BulkSync to peer is complete."
   ::= { ciscoLwappHaMIBNotifs 3 }

cLHaPeerHotStandbyTrap NOTIFICATION-TYPE
    OBJECTS         { cLHaPeerHotStandbyEvent }
    STATUS          current
    DESCRIPTION
        "The notification is sent by the active redundant
        unit whenever its peer unit turned hot-standby."
   ::= { ciscoLwappHaMIBNotifs 4 }
-- *******************************************************************
-- *    Compliance statements
-- ********************************************************************

ciscoLwappHaMIBCompliances  OBJECT IDENTIFIER
    ::= { ciscoLwappHaMIBConform 1 }

ciscoLwappHaMIBGroups  OBJECT IDENTIFIER
    ::= { ciscoLwappHaMIBConform 2 }


ciscoLwappHaMIBCompliance MODULE-COMPLIANCE
    STATUS          current
    DESCRIPTION
        "This is a default module-compliance
        containing default object groups."
    MODULE          -- this module
    MANDATORY-GROUPS {
                        ciscoLwappHaGlobalConfigGroup,
                        ciscoLwappHaNetworkConfigGroup,
                        ciscoLwappHaStatisticsGroup,
                        ciscoLwappHaMIBNotificationVariableGroup,
                        ciscoLwappHaMIBNotificationGroup
                    }
    ::= { ciscoLwappHaMIBCompliances 1 }

-- *******************************************************************
-- Units of Conformance
-- *******************************************************************

ciscoLwappHaGlobalConfigGroup OBJECT-GROUP
    OBJECTS         {
                        cLHaApSsoConfig,
                        cLHaPeerIpAddressType,
                        cLHaPeerIpAddress,
                        cLHaServicePortPeerIpAddressType,
                        cLHaServicePortPeerIpAddress,
                        cLHaServicePortPeerIpNetMaskType,
                        cLHaServicePortPeerIpNetMask,
                        cLHaRedundancyIpAddressType,
                        cLHaRedundancyIpAddress,
                        cLHaPeerMacAddress,
                        cLHaVirtualMacAddress,
                        cLHaPrimaryUnit,
                        cLHaLinkEncryption,
                        cLHaNetworkFailOver,
                        cLHaRFStatusUnitIpType,
                        cLHaRFStatusUnitIp,
                        cLHaKATimeout,
                        cLHaKARetryCount,
                        cLHaGwRetryCount,
                        cLHaPeerSearchTimeout
                    }
    STATUS          current
    DESCRIPTION
        "This collection of objects represents the information
        about global config of the high availability objects on 
        the controller."
    ::= { ciscoLwappHaMIBGroups 1 }

ciscoLwappHaNetworkConfigGroup OBJECT-GROUP
    OBJECTS         {
                        cLHaNetworkRoutePeerIPNetmaskType,
                        cLHaNetworkRoutePeerIPNetmask,
                        cLHaNetworkRoutePeerGatewayType,
                        cLHaNetworkRoutePeerGateway,
                        cLHaNetworkRoutePeerTransferStatus,
                        cLHaNetworkRoutePeerRowStatus
                    }
    STATUS          current
    DESCRIPTION
        "This collection of objects represents the information
        about network config of the high availability objects on 
        the controller."
    ::= { ciscoLwappHaMIBGroups 2 }

ciscoLwappHaStatisticsGroup OBJECT-GROUP
    OBJECTS         {
                        cLHaAvgPeerReachLatency,
                        cLHaAvgGwReachLatency,
                        cLHaBulkSyncStatus,
                        cLHaTotalSystemMemory,
                        cLHaFreeSystemMemory,
                        cLHaUsedSystemMemory,
                        cLHaAllocatedFromRtos,
                        cLHaChunksFree,
                        cLHaMmappedRegions,
                        cLHaSpaceInMmappedRegions,
                        cLHaTotalAllocatedSpace,
                        cLHaTotalNotInUseSpace,
                        cLHaTopMostReleasableSpace,
                        cLHaTotalAllocatedInclMmap,
                        cLHaTotalUsedMmap,
                        cLHaTotalFreeInclMmap,
                        cLHaAllCpuUsage,
                        cLHaPowerSupply1Present,
                        cLHaPowerSupply1Operational,
                        cLHaPowerSupply2Present,
                        cLHaPowerSupply2Operational
                    }
    STATUS          current
    DESCRIPTION
        "This collection of objects represents the information
        about the Statistics of high availability objects on the 
        controller."
    ::= { ciscoLwappHaMIBGroups 3 }

ciscoLwappHaMIBNotificationVariableGroup OBJECT-GROUP
    OBJECTS         {
                        cLHaSecondaryControllerUsageTrapType,
                        cLHaSecondaryControllerUsageDayCounter,
                        cLHaBulkSyncCompleteEvent,
                        cLHaPeerHotStandbyEvent
                    }
    STATUS          current
    DESCRIPTION
        "This collection of objects represents the information
        about the Notification of high availability objects on 
        the controller."
    ::= { ciscoLwappHaMIBGroups 4 }

ciscoLwappHaMIBNotificationGroup NOTIFICATION-GROUP
   NOTIFICATIONS    {
                        cLHaSecondaryControllerUsageTrap,
                        cLHaRFSwapInfoTrap,
                        cLHaBulkSyncCompleteTrap,
                        cLHaPeerHotStandbyTrap
                    }
    STATUS          current
    DESCRIPTION
        "This supplemental collection of objects represents the
        HA related notifications sent by the agent to a network
        management station."
    ::= { ciscoLwappHaMIBGroups 5 }

END
-- %DNP%  MLC -Compiled MLC