Skip to content
Permalink
Branch: master
Find file Copy path
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
115 lines (93 sloc) 4.15 KB
// Pong VGA game
// (c) fpga4fun.com
module pong(clk12, vga_h_sync, vga_v_sync, vga_R, vga_G, vga_B, quadA, quadB);
input clk12;
output vga_h_sync, vga_v_sync, vga_R, vga_G, vga_B;
input quadA, quadB;
wire inDisplayArea;
wire [9:0] CounterX;
wire [8:0] CounterY;
wire clk;
SB_PLL40_PAD #(
.FEEDBACK_PATH("SIMPLE"),
.DIVR(4'b0000), // DIVR = 0
//.DIVF(7'b1010011), // DIVF = 83
.DIVF(7'b0111000), // DIVF = 83
.DIVQ(3'b101), // DIVQ = 5
.FILTER_RANGE(3'b001) // FILTER_RANGE = 1
) uut (
.RESETB(1'b1),
.BYPASS(1'b0),
.PACKAGEPIN(clk12),
.PLLOUTCORE(clk)
);
hvsync_generator syncgen(.clk(clk), .vga_h_sync(vga_h_sync), .vga_v_sync(vga_v_sync),
.inDisplayArea(inDisplayArea), .CounterX(CounterX), .CounterY(CounterY));
/////////////////////////////////////////////////////////////////
reg [8:0] PaddlePosition;
reg [2:0] quadAr, quadBr;
always @(posedge clk) quadAr <= {quadAr[1:0], quadA};
always @(posedge clk) quadBr <= {quadBr[1:0], quadB};
always @(posedge clk)
if(quadAr[2] ^ quadAr[1] ^ quadBr[2] ^ quadBr[1])
begin
if(quadAr[2] ^ quadBr[1])
begin
if(~&PaddlePosition) // make sure the value doesn't overflow
PaddlePosition <= PaddlePosition + 1;
end
else
begin
if(|PaddlePosition) // make sure the value doesn't underflow
PaddlePosition <= PaddlePosition - 1;
end
end
/////////////////////////////////////////////////////////////////
reg [9:0] ballX;
reg [8:0] ballY;
reg ball_inX, ball_inY;
always @(posedge clk)
if(ball_inX==0) ball_inX <= (CounterX==ballX) & ball_inY; else ball_inX <= !(CounterX==ballX+16);
always @(posedge clk)
if(ball_inY==0) ball_inY <= (CounterY==ballY); else ball_inY <= !(CounterY==ballY+16);
wire ball = ball_inX & ball_inY;
/////////////////////////////////////////////////////////////////
wire border = (CounterX[9:3]==0) || (CounterX[9:3]==79) || (CounterY[8:3]==0) || (CounterY[8:3]==59);
wire paddle = (CounterX>=PaddlePosition+8) && (CounterX<=PaddlePosition+120) && (CounterY[8:4]==27);
wire BouncingObject = border | paddle; // active if the border or paddle is redrawing itself
reg ResetCollision;
always @(posedge clk) ResetCollision <= (CounterY==500) & (CounterX==0); // active only once for every video frame
reg CollisionX1, CollisionX2, CollisionY1, CollisionY2;
always @(posedge clk) if(ResetCollision) CollisionX1<=0; else if(BouncingObject & (CounterX==ballX ) & (CounterY==ballY+ 8)) CollisionX1<=1;
always @(posedge clk) if(ResetCollision) CollisionX2<=0; else if(BouncingObject & (CounterX==ballX+16) & (CounterY==ballY+ 8)) CollisionX2<=1;
always @(posedge clk) if(ResetCollision) CollisionY1<=0; else if(BouncingObject & (CounterX==ballX+ 8) & (CounterY==ballY )) CollisionY1<=1;
always @(posedge clk) if(ResetCollision) CollisionY2<=0; else if(BouncingObject & (CounterX==ballX+ 8) & (CounterY==ballY+16)) CollisionY2<=1;
/////////////////////////////////////////////////////////////////
wire UpdateBallPosition = ResetCollision; // update the ball position at the same time that we reset the collision detectors
reg ball_dirX, ball_dirY;
always @(posedge clk)
if(UpdateBallPosition)
begin
if(~(CollisionX1 & CollisionX2)) // if collision on both X-sides, don't move in the X direction
begin
ballX <= ballX + (ball_dirX ? -1 : 1);
if(CollisionX2) ball_dirX <= 1; else if(CollisionX1) ball_dirX <= 0;
end
if(~(CollisionY1 & CollisionY2)) // if collision on both Y-sides, don't move in the Y direction
begin
ballY <= ballY + (ball_dirY ? -1 : 1);
if(CollisionY2) ball_dirY <= 1; else if(CollisionY1) ball_dirY <= 0;
end
end
/////////////////////////////////////////////////////////////////
wire R = BouncingObject | ball | (CounterX[3] ^ CounterY[3]);
wire G = BouncingObject | ball;
wire B = BouncingObject | ball;
reg vga_R, vga_G, vga_B;
always @(posedge clk)
begin
vga_R <= R & inDisplayArea;
vga_G <= G & inDisplayArea;
vga_B <= B & inDisplayArea;
end
endmodule
You can’t perform that action at this time.