• cn
• en

操作指南

此SDK仅适用于深圳乐动机器人有限公司销售的激光雷达产品，产品型号为:

• LDROBOT LiDAR LD06
• LDROBOT LiDAR LD19

0. 获取雷达的Linux SDK

cd ~

mkdir  ldlidar_ws

cd ldlidar_ws

git clone  https://github.com/ldrobotSensorTeam/ldlidar_stl_sdk.git
# 或者
git clone  https://gitee.com/ldrobotSensorTeam/ldlidar_stl_sdk.git

1. 系统设置

• 第一步，通过板载串口或者USB转串口模块(例如,cp2102模块)的方式使雷达连接到你的系统主板.
• 第二步，设置雷达在系统中挂载的串口设备-x权限(以/dev/ttyUSB0为例)
  • 实际使用时，根据雷达在你的系统中的实际挂载情况来设置，可以使用ls -l /dev命令查看.

cd ~/ldlidar_ws/ldlidar_stl_sdk

sudo chmod 777 /dev/ttyUSB0

2. 编译

cd ~/ldlidar_ws/ldlidar_stl_sdk

./auto_build.sh

3. 运行

./start_node.sh

Instructions

This SDK is only applicable to the LiDAR products sold by Shenzhen LDROBOT Co., LTD. The product models are :

• LDROBOT LiDAR LD06
• LDROBOT LiDAR LD19

0. get LiDAR Linux SDK

cd ~

mkdir  ldlidar_ws

cd ldlidar_ws

git clone  https://github.com/ldrobotSensorTeam/ldlidar_stl_sdk.git
# or
git clone  https://gitee.com/ldrobotSensorTeam/ldlidar_stl_sdk.git

step 1: system setup

• Connect the LiDAR to your system motherboard via an onboard serial port or usB-to-serial module (for example, CP2102 module).

• Set the -x permission for the serial port device mounted by the radar in the system (for example, /dev/ttyUSB0)

  • In actual use, the LiDAR can be set according to the actual mounted status of your system, you can use 'ls -l /dev' command to view.

cd ~/ldlidar_ws/ldlidar_stl_sdk

sudo chmod 777 /dev/ttyUSB0

step 2: build

cd ~/ldlidar_ws/ldlidar_stl_sdk

./auto_build.sh

step 3: run

./start_node.sh