Permalink
Browse files

ar71xx: add WRTnode2Q support

Signed-off-by: KeLei Liang <xzmu@wrtnode.com>
  • Loading branch information...
wrtnode-sdk authored and blogic committed May 31, 2016
1 parent 754565a commit 563e9d5e1b26be6d98f04f9cdb3f307f27757b38
@@ -400,7 +400,8 @@ routerstation|\
tl-wr710n |\
tl-wr720n-v3|\
tl-wr810n |\
wpe72)
wpe72 |\
wrtnode2q)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;

@@ -1052,6 +1052,9 @@ ar71xx_board_detect() {
*WRT400N)
name="wrt400n"
;;
*"WRTnode2Q board")
name="wrtnode2q"
;;
*"WZR-450HP2")
name="wzr-450hp2"
;;
@@ -272,7 +272,8 @@ platform_check_image() {
unifiac-pro | \
unifi-outdoor | \
carambola2 | \
weio )
weio | \
wrtnode2q)
[ "$magic" != "2705" ] && {
echo "Invalid image type."
return 1
@@ -190,6 +190,7 @@ CONFIG_ATH79_MACH_WPJ531=y
CONFIG_ATH79_MACH_WPJ558=y
CONFIG_ATH79_MACH_WRT160NL=y
CONFIG_ATH79_MACH_WRT400N=y
CONFIG_ATH79_MACH_WRTNODE2Q=y
CONFIG_ATH79_MACH_WZR_450HP2=y
CONFIG_ATH79_MACH_WZR_HP_AG300H=y
CONFIG_ATH79_MACH_WZR_HP_G300NH=y
@@ -680,6 +680,16 @@ config ATH79_MACH_WRT400N
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80

config ATH79_MACH_WRTNODE2Q
bool "WRTnode2Q board support"
select SOC_QCA953X
select ATH79_DEV_AP9X_PCI if PCI
select ATH79_DEV_ETH
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC

config ATH79_MACH_R6100
bool "NETGEAR R6100 board support"
select SOC_AR934X
@@ -194,6 +194,7 @@ obj-$(CONFIG_ATH79_MACH_WPJ531) += mach-wpj531.o
obj-$(CONFIG_ATH79_MACH_WPJ558) += mach-wpj558.o
obj-$(CONFIG_ATH79_MACH_WRT160NL) += mach-wrt160nl.o
obj-$(CONFIG_ATH79_MACH_WRT400N) += mach-wrt400n.o
obj-$(CONFIG_ATH79_MACH_WRTNODE2Q) += mach-wrtnode2q.o
obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o
obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o
obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o
@@ -0,0 +1,126 @@
/*
* WRTnode2Q board support
*
* Copyright (c) 2013 The Linux Foundation. All rights reserved.
* Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
* Copyright (c) 2015 Kelei <xzmu@wrtnode.com>
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*
*/

#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
#include <linux/ar8216_platform.h>

#include <asm/mach-ath79/ar71xx_regs.h>

#include "common.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-spi.h"
#include "dev-usb.h"
#include "dev-wmac.h"
#include "machtypes.h"
#include "pci.h"

#define WRTNODE2Q_GPIO_LED_WLAN 12
#define WRTNODE2Q_GPIO_LED_WPS 13
#define WRTNODE2Q_GPIO_LED_STATUS 13

#define WRTNODE2Q_GPIO_LED_WAN 4
#define WRTNODE2Q_GPIO_LED_LAN1 16
#define WRTNODE2Q_GPIO_LED_LAN2 15
#define WRTNODE2Q_GPIO_LED_LAN3 14
#define WRTNODE2Q_GPIO_LED_LAN4 11

#define WRTNODE2Q_GPIO_BTN_WPS 17

#define WRTNODE2Q_KEYS_POLL_INTERVAL 20 /* msecs */
#define WRTNODE2Q_KEYS_DEBOUNCE_INTERVAL (3 * WRTNODE2Q_KEYS_POLL_INTERVAL)

#define WRTNODE2Q_MAC0_OFFSET 0
#define WRTNODE2Q_WMAC_CALDATA_OFFSET 0x1000

static struct gpio_led wrtnode2q_leds_gpio[] __initdata = {
{
.name = "wrtnode2q:green:status",
.gpio = WRTNODE2Q_GPIO_LED_STATUS,
.active_low = 1,
},
{
.name = "wrtnode2q:green:wlan",
.gpio = WRTNODE2Q_GPIO_LED_WLAN,
.active_low = 1,
}
};

static struct gpio_keys_button wrtnode2q_gpio_keys[] __initdata = {
{
.desc = "WPS button",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = WRTNODE2Q_KEYS_DEBOUNCE_INTERVAL,
.gpio = WRTNODE2Q_GPIO_BTN_WPS,
.active_low = 1,
},
};

static void __init wrtnode2q_gpio_led_setup(void)
{
ath79_register_leds_gpio(-1, ARRAY_SIZE(wrtnode2q_leds_gpio),
wrtnode2q_leds_gpio);
ath79_register_gpio_keys_polled(-1, WRTNODE2Q_KEYS_POLL_INTERVAL,
ARRAY_SIZE(wrtnode2q_gpio_keys),
wrtnode2q_gpio_keys);
}

static void __init wrtnode2q_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1f040000);

ath79_register_m25p80(NULL);

wrtnode2q_gpio_led_setup();

ath79_register_pci();
ath79_register_usb();

ath79_register_wmac(art + WRTNODE2Q_WMAC_CALDATA_OFFSET, NULL);

ath79_register_mdio(0, 0x0);
ath79_register_mdio(1, 0x0);

ath79_init_mac(ath79_eth0_data.mac_addr, art + WRTNODE2Q_MAC0_OFFSET, 0);
ath79_init_mac(ath79_eth1_data.mac_addr, art + WRTNODE2Q_MAC0_OFFSET, 1);

/* LAN ports */
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_eth1_data.speed = SPEED_1000;
ath79_eth1_data.duplex = DUPLEX_FULL;
ath79_switch_data.phy_poll_mask |= BIT(4);
ath79_switch_data.phy4_mii_en = 1;
ath79_register_eth(1);

/* WAN port */
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.speed = SPEED_100;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.phy_mask = BIT(4);
ath79_register_eth(0);
}

MIPS_MACHINE(ATH79_MACH_WRTNODE2Q, "WRTNODE2Q", "WRTnode2Q board",
wrtnode2q_setup);
@@ -255,6 +255,7 @@ enum ath79_mach_type {
ATH79_MACH_WPJ558, /* Compex WPJ558 */
ATH79_MACH_WRT160NL, /* Linksys WRT160NL */
ATH79_MACH_WRT400N, /* Linksys WRT400N */
ATH79_MACH_WRTNODE2Q, /* WRTnode2Q */
ATH79_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */
ATH79_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */
ATH79_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */
@@ -0,0 +1,17 @@
#
# Copyright (C) 2009 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#

define Profile/WRTNODE2Q
NAME:=WRTnode2Q board
PACKAGES:=kmod-usb-core kmod-usb2 kmod-usb-storage
endef

define Profile/WRTNODE2Q/Description
Package set optimized for the WRTnode2Q board.
endef

$(eval $(call Profile,WRTNODE2Q))
@@ -314,6 +314,7 @@ zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(
qihoo_c301_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(devdata),64k(devconf),15744k(firmware),64k(warm_start),64k(action_image_config),64k(radiocfg)ro;spi0.1:15360k(upgrade2),1024k(privatedata)
yun_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6464k(rootfs),1280k(kernel),64k(nvram),64k(art),7744k@0x50000(firmware)
yun_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14656k(rootfs),1280k(kernel),64k(nvram),64k(art),15936k@0x50000(firmware)
wrtnode2q_mtdlayout=mtdparts=spi0.0:192k(u-boot),64k(u-boot-env),64k(art),1472k(kernel),14592k(rootfs),16064k@0x50000(firmware),16384k@0x0(fullflash)

define Image/BuildKernel
cp $(KDIR)/vmlinux.elf $(VMLINUX).elf
@@ -1026,6 +1027,7 @@ $(eval $(call SingleProfile,AthLzma,64k,WPJ344_16M,wpj344-16M,WPJ344,ttyS0,11520
$(eval $(call SingleProfile,AthLzma,64k,DR344,dr344,DR344,ttyS0,115200,$$(dr344_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,WPJ531_16M,wpj531-16M,WPJ531,ttyS0,115200,$$(wpj531_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,WPJ558_16M,wpj558-16M,WPJ558,ttyS0,115200,$$(wpj558_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,WRTNODE2Q,wrtnode2q,WRTNODE2Q,ttyS0,115200,$$(wrtnode2q_mtdlayout),KRuImage))
$(eval $(call SingleProfile,AthLzma,64k,YUN_8M,yun-8M,Yun,ttyATH0,250000,$$(yun_mtdlayout_8M),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,YUN_16M,yun-16M,Yun,ttyATH0,250000,$$(yun_mtdlayout_16M),RKuImage))

0 comments on commit 563e9d5

Please sign in to comment.