<%= notice %>
+<%= alert %>
<%= yield %> diff --git a/config/environments/development.rb b/config/environments/development.rb index 99af202..786e461 100644 --- a/config/environments/development.rb +++ b/config/environments/development.rb @@ -1,4 +1,5 @@ Hammr::Application.configure do + config.action_mailer.default_url_options = { :host => 'localhost:3000' } # Settings specified here will take precedence over those in config/application.rb # In the development environment your application's code is reloaded on diff --git a/config/environments/production.rb b/config/environments/production.rb index b0725fa..a04ed78 100644 --- a/config/environments/production.rb +++ b/config/environments/production.rb @@ -1,4 +1,5 @@ Hammr::Application.configure do + config.action_mailer.default_url_options = { :host => 'localhost:3000' } # Settings specified here will take precedence over those in config/application.rb # The production environment is meant for finished, "live" apps. diff --git a/config/environments/test.rb b/config/environments/test.rb index fd8910c..4fbea1f 100644 --- a/config/environments/test.rb +++ b/config/environments/test.rb @@ -1,4 +1,5 @@ Hammr::Application.configure do + config.action_mailer.default_url_options = { :host => 'localhost:3000' } # Settings specified here will take precedence over those in config/application.rb # The test environment is used exclusively to run your application's diff --git a/config/initializers/devise.rb b/config/initializers/devise.rb new file mode 100644 index 0000000..da4e73d --- /dev/null +++ b/config/initializers/devise.rb @@ -0,0 +1,204 @@ +# Use this hook to configure devise mailer, warden hooks and so forth. The first +# four configuration values can also be set straight in your models. +Devise.setup do |config| + # ==> Mailer Configuration + # Configure the e-mail address which will be shown in DeviseMailer. + config.mailer_sender = "please-change-me-at-config-initializers-devise@example.com" + + # Configure the class responsible to send e-mails. + # config.mailer = "Devise::Mailer" + + # ==> ORM configuration + # Load and configure the ORM. Supports :active_record (default) and + # :mongoid (bson_ext recommended) by default. Other ORMs may be + # available as additional gems. + require 'devise/orm/active_record' + + # ==> Configuration for any authentication mechanism + # Configure which keys are used when authenticating a user. The default is + # just :email. You can configure it to use [:username, :subdomain], so for + # authenticating a user, both parameters are required. Remember that those + # parameters are used only when authenticating and not when retrieving from + # session. If you need permissions, you should implement that in a before filter. + # You can also supply a hash where the value is a boolean determining whether + # or not authentication should be aborted when the value is not present. + # config.authentication_keys = [ :email ] + + # Configure parameters from the request object used for authentication. Each entry + # given should be a request method and it will automatically be passed to the + # find_for_authentication method and considered in your model lookup. For instance, + # if you set :request_keys to [:subdomain], :subdomain will be used on authentication. + # The same considerations mentioned for authentication_keys also apply to request_keys. + # config.request_keys = [] + + # Configure which authentication keys should be case-insensitive. + # These keys will be downcased upon creating or modifying a user and when used + # to authenticate or find a user. Default is :email. + config.case_insensitive_keys = [ :email ] + + # Configure which authentication keys should have whitespace stripped. + # These keys will have whitespace before and after removed upon creating or + # modifying a user and when used to authenticate or find a user. Default is :email. + config.strip_whitespace_keys = [ :email ] + + # Tell if authentication through request.params is enabled. True by default. + # config.params_authenticatable = true + + # Tell if authentication through HTTP Basic Auth is enabled. False by default. + # config.http_authenticatable = false + + # If http headers should be returned for AJAX requests. True by default. + # config.http_authenticatable_on_xhr = true + + # The realm used in Http Basic Authentication. "Application" by default. + # config.http_authentication_realm = "Application" + + # It will change confirmation, password recovery and other workflows + # to behave the same regardless if the e-mail provided was right or wrong. + # Does not affect registerable. + # config.paranoid = true + + # ==> Configuration for :database_authenticatable + # For bcrypt, this is the cost for hashing the password and defaults to 10. If + # using other encryptors, it sets how many times you want the password re-encrypted. + config.stretches = 10 + + # Setup a pepper to generate the encrypted password. + # config.pepper = "9c10ede0dab0aaa0845bece92cccb8d267636ae12b1969d4363bea9b30eef94d2bcae15b58bd67669db5a294a275b59a06b50d0f24be763cff165c7ee0040157" + + # ==> Configuration for :confirmable + # The time you want to give your user to confirm his account. During this time + # he will be able to access your application without confirming. Default is 0.days + # When confirm_within is zero, the user won't be able to sign in without confirming. + # You can use this to let your user access some features of your application + # without confirming the account, but blocking it after a certain period + # (ie 2 days). + # config.confirm_within = 2.days + + # Defines which key will be used when confirming an account + # config.confirmation_keys = [ :email ] + + # ==> Configuration for :rememberable + # The time the user will be remembered without asking for credentials again. + # config.remember_for = 2.weeks + + # If true, a valid remember token can be re-used between multiple browsers. + # config.remember_across_browsers = true + + # If true, extends the user's remember period when remembered via cookie. + # config.extend_remember_period = false + + # If true, uses the password salt as remember token. This should be turned + # to false if you are not using database authenticatable. + config.use_salt_as_remember_token = true + + # Options to be passed to the created cookie. For instance, you can set + # :secure => true in order to force SSL only cookies. + # config.cookie_options = {} + + # ==> Configuration for :validatable + # Range for password length. Default is 6..128. + # config.password_length = 6..128 + + # Regex to use to validate the email address + # config.email_regexp = /\A([\w\.%\+\-]+)@([\w\-]+\.)+([\w]{2,})\z/i + + # ==> Configuration for :timeoutable + # The time you want to timeout the user session without activity. After this + # time the user will be asked for credentials again. Default is 30 minutes. + # config.timeout_in = 30.minutes + + # ==> Configuration for :lockable + # Defines which strategy will be used to lock an account. + # :failed_attempts = Locks an account after a number of failed attempts to sign in. + # :none = No lock strategy. You should handle locking by yourself. + # config.lock_strategy = :failed_attempts + + # Defines which key will be used when locking and unlocking an account + # config.unlock_keys = [ :email ] + + # Defines which strategy will be used to unlock an account. + # :email = Sends an unlock link to the user email + # :time = Re-enables login after a certain amount of time (see :unlock_in below) + # :both = Enables both strategies + # :none = No unlock strategy. You should handle unlocking by yourself. + # config.unlock_strategy = :both + + # Number of authentication tries before locking an account if lock_strategy + # is failed attempts. + # config.maximum_attempts = 20 + + # Time interval to unlock the account if :time is enabled as unlock_strategy. + # config.unlock_in = 1.hour + + # ==> Configuration for :recoverable + # + # Defines which key will be used when recovering the password for an account + # config.reset_password_keys = [ :email ] + + # Time interval you can reset your password with a reset password key. + # Don't put a too small interval or your users won't have the time to + # change their passwords. + config.reset_password_within = 2.hours + + # ==> Configuration for :encryptable + # Allow you to use another encryption algorithm besides bcrypt (default). You can use + # :sha1, :sha512 or encryptors from others authentication tools as :clearance_sha1, + # :authlogic_sha512 (then you should set stretches above to 20 for default behavior) + # and :restful_authentication_sha1 (then you should set stretches to 10, and copy + # REST_AUTH_SITE_KEY to pepper) + # config.encryptor = :sha512 + + # ==> Configuration for :token_authenticatable + # Defines name of the authentication token params key + # config.token_authentication_key = :auth_token + + # If true, authentication through token does not store user in session and needs + # to be supplied on each request. Useful if you are using the token as API token. + # config.stateless_token = false + + # ==> Scopes configuration + # Turn scoped views on. Before rendering "sessions/new", it will first check for + # "users/sessions/new". It's turned off by default because it's slower if you + # are using only default views. + # config.scoped_views = false + + # Configure the default scope given to Warden. By default it's the first + # devise role declared in your routes (usually :user). + # config.default_scope = :user + + # Configure sign_out behavior. + # Sign_out action can be scoped (i.e. /users/sign_out affects only :user scope). + # The default is true, which means any logout action will sign out all active scopes. + # config.sign_out_all_scopes = true + + # ==> Navigation configuration + # Lists the formats that should be treated as navigational. Formats like + # :html, should redirect to the sign in page when the user does not have + # access, but formats like :xml or :json, should return 401. + # + # If you have any extra navigational formats, like :iphone or :mobile, you + # should add them to the navigational formats lists. + # + # The :"*/*" and "*/*" formats below is required to match Internet + # Explorer requests. + # config.navigational_formats = [:"*/*", "*/*", :html] + + # The default HTTP method used to sign out a resource. Default is :delete. + config.sign_out_via = :delete + + # ==> OmniAuth + # Add a new OmniAuth provider. Check the wiki for more information on setting + # up on your models and hooks. + # config.omniauth :github, 'APP_ID', 'APP_SECRET', :scope => 'user,public_repo' + + # ==> Warden configuration + # If you want to use other strategies, that are not supported by Devise, or + # change the failure app, you can configure them inside the config.warden block. + # + # config.warden do |manager| + # manager.failure_app = AnotherApp + # manager.intercept_401 = false + # manager.default_strategies(:scope => :user).unshift :some_external_strategy + # end +end diff --git a/config/locales/devise.en.yml b/config/locales/devise.en.yml new file mode 100644 index 0000000..a5cf3bf --- /dev/null +++ b/config/locales/devise.en.yml @@ -0,0 +1,53 @@ +# Additional translations at http://github.com/plataformatec/devise/wiki/I18n + +en: + errors: + messages: + expired: "has expired, please request a new one" + not_found: "not found" + already_confirmed: "was already confirmed, please try signing in" + not_locked: "was not locked" + not_saved: + one: "1 error prohibited this %{resource} from being saved:" + other: "%{count} errors prohibited this %{resource} from being saved:" + + devise: + failure: + already_authenticated: 'You are already signed in.' + unauthenticated: 'You need to sign in or sign up before continuing.' + unconfirmed: 'You have to confirm your account before continuing.' + locked: 'Your account is locked.' + invalid: 'Invalid email or password.' + invalid_token: 'Invalid authentication token.' + timeout: 'Your session expired, please sign in again to continue.' + inactive: 'Your account was not activated yet.' + sessions: + signed_in: 'Signed in successfully.' + signed_out: 'Signed out successfully.' + passwords: + send_instructions: 'You will receive an email with instructions about how to reset your password in a few minutes.' + updated: 'Your password was changed successfully. You are now signed in.' + send_paranoid_instructions: "If your e-mail exists on our database, you will receive a password recovery link on your e-mail" + confirmations: + send_instructions: 'You will receive an email with instructions about how to confirm your account in a few minutes.' + send_paranoid_instructions: 'If your e-mail exists on our database, you will receive an email with instructions about how to confirm your account in a few minutes.' + confirmed: 'Your account was successfully confirmed. You are now signed in.' + registrations: + signed_up: 'Welcome! You have signed up successfully.' + inactive_signed_up: 'You have signed up successfully. However, we could not sign you in because your account is %{reason}.' + updated: 'You updated your account successfully.' + destroyed: 'Bye! Your account was successfully cancelled. We hope to see you again soon.' + unlocks: + send_instructions: 'You will receive an email with instructions about how to unlock your account in a few minutes.' + unlocked: 'Your account was successfully unlocked. You are now signed in.' + send_paranoid_instructions: 'If your account exists, you will receive an email with instructions about how to unlock it in a few minutes.' + omniauth_callbacks: + success: 'Successfully authorized from %{kind} account.' + failure: 'Could not authorize you from %{kind} because "%{reason}".' + mailer: + confirmation_instructions: + subject: 'Confirmation instructions' + reset_password_instructions: + subject: 'Reset password instructions' + unlock_instructions: + subject: 'Unlock Instructions' diff --git a/config/routes.rb b/config/routes.rb index a26e856..d2fef34 100644 --- a/config/routes.rb +++ b/config/routes.rb @@ -1,4 +1,5 @@ Hammr::Application.routes.draw do + root :to => "home#index" # The priority is based upon order of creation: # first created -> highest priority.