Tool to boot kirkwood chips over UART
Switch branches/tags
Nothing to show
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Failed to load latest commit information.
.gitignore
Makefile
README
kwuartboot.c

README

NB: This is not written by me. The original site used to be hosted here:
http://www.solinno.co.uk/public/kwuartboot/

-------------------------------------------------------------------------------

To build, type "make".

Let's say your JTAG/UART is on /dev/ttyUSB0, and you have a u-boot.kwb you
want to test.

1. Power off the Kirkwood SoC
2. Make sure any terminal emulator is disconnected
3. Run the program as follows

  $ ./kwuartboot /dev/ttyUSB0 uboot.kwb

4. Power on the Kirkwood SoC
5. Start the terminal emulator - u-boot should be running.