Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
tag: GitLive-maint-…
Fetching contributors…

Cannot retrieve contributors at this time

1585 lines (1290 sloc) 48.844 kb
#! /bin/sh
case $PERL_CONFIG_SH in
'')
if test -f config.sh
then TOP=.
else
echo "Can't find config.sh."; exit 1
fi
. $TOP/config.sh
;;
esac
# H.Merijn Brand [17 Feb 2004]
# This comment is just to ensure that Configure will find variables that
# are removed/replaced in patches on blead, but are still needed in the
# 5.8.x, 5.6.x and 5.005.x maintainance tracks.
# metaconfig -m will scan all .SH files on this level (not deeper), and
# not in x2p and other subfolders. This file is as good as any .SH
# patch references
# #22227 $baserev
# #22302 $yacc $byacc
# H.Merijn Brand [30 Oct 2004]
# Mentioned for the same reason for future reference
# #23434 $d_strlcat $d_strlcpy
: This forces SH files to create target in same directory as SH file.
: This is so that make depend always knows where to find SH derivatives.
case "$0" in
*/*) cd `expr X$0 : 'X\(.*\)/'` ;;
esac
case "$d_dosuid" in
*define*) suidperl='suidperl' ;;
*) suidperl='';;
esac
linklibperl='$(LIBPERL)'
linklibperl_nonshr=''
shrpldflags='$(LDDLFLAGS)'
ldlibpth=''
DPERL_EXTERNAL_GLOB='-DPERL_EXTERNAL_GLOB'
case "$useshrplib" in
true)
# Prefix all runs of 'miniperl' and 'perl' with
# $ldlibpth so that ./perl finds *this* shared libperl.
case "$LD_LIBRARY_PATH" in
'')
ldlibpth="LD_LIBRARY_PATH=`pwd`";;
*)
ldlibpth="LD_LIBRARY_PATH=`pwd`:${LD_LIBRARY_PATH}";;
esac
pldlflags="$cccdlflags"
static_target='static_pic'
case "${osname}${osvers}" in
next4*)
ld=libtool
lddlflags="-dynamic -undefined warning -framework System \
-compatibility_version 1 -current_version $patchlevel \
-prebind -seg1addr 0x27000000 -install_name \$(shrpdir)/\$@"
;;
rhapsody*|darwin*)
shrpldflags="${ldflags} -dynamiclib \
-compatibility_version \
${api_revision}.${api_version}.${api_subversion} \
-current_version \
${revision}.${patchlevel}.${subversion} \
-install_name \$(shrpdir)/\$@"
;;
cygwin*)
linklibperl="-lperl"
;;
sunos*)
linklibperl="-lperl"
;;
netbsd*|freebsd[234]*|openbsd*|dragonfly*)
linklibperl="-L. -lperl"
;;
interix*)
linklibperl="-L. -lperl"
shrpldflags="$shrpldflags -Wl,--image-base,0x57000000"
;;
aix*)
case "$cc" in
gcc*)
shrpldflags="-shared -Wl,-H512 -Wl,-T512 -Wl,-bhalt:4 -Wl,-bM:SRE -Wl,-bE:perl.exp"
case "$osvers" in
3*) shrpldflags="$shrpldflags -e _nostart"
;;
*) shrpldflags="$shrpldflags -Wl,-bnoentry"
;;
esac
shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib"
linklibperl="-L $archlibexp/CORE -L `pwd | sed 's/\/UU$//'` -lperl"
linklibperl_nonshr='-lperl_nonshr'
;;
*)
shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp"
case "$osvers" in
3*) shrpldflags="$shrpldflags -e _nostart"
;;
*) shrpldflags="$shrpldflags -b noentry"
;;
esac
shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib"
linklibperl="-L $archlibexp/CORE -L `pwd | sed 's/\/UU$//'` -lperl"
linklibperl_nonshr='-lperl_nonshr'
;;
esac
;;
hpux*)
linklibperl="-L `pwd | sed 's/\/UU$//'` -Wl,+s -Wl,+b$archlibexp/CORE -lperl"
;;
os390*)
shrpldflags='-W l,XPLINK,dll'
linklibperl='libperl.x'
DPERL_EXTERNAL_GLOB=''
;;
esac
case "$ldlibpthname" in
'') ;;
*)
case "$osname" in
os2)
ldlibpth=''
;;
*)
eval "ldlibpth=\"$ldlibpthname=`pwd`:\$$ldlibpthname\""
;;
esac
# Strip off any trailing :'s
ldlibpth=`echo $ldlibpth | sed 's/:*$//'`
;;
esac
case "$ldlibpth" in
# Protect any spaces
*" "*) ldlibpth=`echo $ldlibpth|sed 's/ /\\\\ /g'` ;;
esac
case "$osname" in
linux)
# If there is a pre-existing $libperl from a previous
# installation, Linux needs to use LD_PRELOAD to
# override the LD_LIBRARY_PATH setting. See the
# INSTALL file, under "Building a shared perl library".
# If there is no pre-existing $libperl, we don't need
# to do anything further.
if test -f $archlib/CORE/$libperl; then
rm -f preload
cat <<'EOT' > preload
#! /bin/sh
lib=$1
shift
test -r $lib && export LD_PRELOAD="$lib $LD_PRELOAD"
exec "$@"
EOT
chmod 755 preload
ldlibpth="$ldlibpth `pwd`/preload `pwd`/$libperl"
fi
;;
os390) test -f /bin/env && ldlibpth="/bin/env $ldlibpth"
;;
esac
;;
*) pldlflags=''
static_target='static'
;;
esac
: Prepare dependency lists for Makefile.
dynamic_list=' '
extra_dep=''
for f in $dynamic_ext; do
: the dependency named here will never exist
base=`echo "$f" | sed 's/.*\///'`
this_target="lib/auto/$f/$base.$dlext"
dynamic_list="$dynamic_list $this_target"
: Parallel makes reveal that we have some interdependencies
case $f in
Math/BigInt/FastCalc|Devel/NYTProf) extra_dep="$extra_dep
$this_target: lib/auto/List/Util/Util.$dlext" ;;
Unicode/Normalize) extra_dep="$extra_dep
$this_target: uni.data" ;;
esac
done
static_list=' '
for f in $static_ext; do
base=`echo "$f" | sed 's/.*\///'`
static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)"
done
nonxs_list=' '
for f in $nonxs_ext; do
base=`echo "$f" | sed 's/.*\///'`
nonxs_list="$nonxs_list ext/$f/pm_to_blib"
done
# Handle the usage of different yaccs in posix-bc (During Configure we
# us yacc for perly.y and byacc for a2p.y. The makefiles must use the
# same configuration for run_byacc!):
case "$osname" in
posix-bc)
byacc=$yacc
;;
esac
echo "Extracting Makefile (with variable substitutions)"
$spitshell >Makefile <<!GROK!THIS!
# Makefile.SH
# This file is derived from Makefile.SH. Any changes made here will
# be lost the next time you run Configure.
# Makefile is used to generate $firstmakefile. The only difference
# is that $firstmakefile has the dependencies filled in at the end.
#
#
# I now supply perly.c with the kits, so don't remake perly.c without byacc
BYACC = $byacc
CC = $cc
LD = $ld
LDFLAGS = $ldflags
CLDFLAGS = $ldflags
mallocsrc = $mallocsrc
mallocobj = $mallocobj
LNS = $lns
# NOTE: some systems don't grok "cp -f". XXX Configure test needed?
CPS = $cp
RMS = rm -f
ranlib = $ranlib
# The following are mentioned only to make metaconfig include the
# appropriate questions in Configure. If you want to change these,
# edit config.sh instead, or specify --man1dir=/wherever on
# installman commandline.
bin = $installbin
scriptdir = $scriptdir
shrpdir = $archlibexp/CORE
privlib = $installprivlib
man1dir = $man1dir
man1ext = $man1ext
man3dir = $man3dir
man3ext = $man3ext
# The following are used to build and install shared libraries for
# dynamic loading.
LDDLFLAGS = $lddlflags
SHRPLDFLAGS = $shrpldflags
CCDLFLAGS = $ccdlflags
DLSUFFIX = .$dlext
PLDLFLAGS = $pldlflags
LIBPERL = $libperl
LLIBPERL= $linklibperl
LLIBPERL_NONSHR= $linklibperl_nonshr
SHRPENV = $shrpenv
# Static targets are ordinarily built without CCCDLFLAGS. However,
# if building a shared libperl.so that might later be linked into
# another application, then it might be appropriate to also build static
# extensions (usually just DynaLoader) with relocatable code (e.g. -fPIC
# for GNU cc). This is handled by ext/util/make_ext.
STATIC = $static_target
# The following is used to include the current directory in
# the dynamic loader path you are building a shared libperl.
LDLIBPTH = $ldlibpth
# Sometimes running an executable is an adventure.
RUN = $run
dynamic_ext = $dynamic_list
static_ext = $static_list
nonxs_ext = $nonxs_list
ext = \$(dynamic_ext) \$(static_ext) \$(nonxs_ext)
DYNALOADER = DynaLoader\$(OBJ_EXT)
libs = $perllibs $cryptlib
public = perl\$(EXE_EXT) $suidperl utilities translators
shellflags = $shellflags
# This is set to MAKE=$make if your $make command doesn't
# do it for you.
$make_set_make
# Mention $gmake here so it gets probed for by Configure.
# These variables may need to be manually set for non-Unix systems.
AR = $full_ar
EXE_EXT = $_exe
LIB_EXT = $_a
OBJ_EXT = $_o
PATH_SEP = $p_
# If you're going to use valgrind and it can't be invoked as plain valgrind
# then you'll need to change this, or override it on the make command line.
VALGRIND=valgrind
FIRSTMAKEFILE = $firstmakefile
# Any special object files needed by this architecture, e.g. os2/os2.obj
ARCHOBJS = $archobjs
.SUFFIXES: .c \$(OBJ_EXT) .i .s
# grrr
SHELL = $sh
# how to tr(anslate) newlines
TRNL = '$trnl'
OPTIMIZE = $optimize
EXTRAS = $extras
INSTALLPREFIXEXP = $prefix
!GROK!THIS!
# not used by Makefile but by installperl;
# mentioned here so that metaconfig picks these up
# $installusrbinperl
# $versiononly
case "${osname}:${osvers}" in
darwin:*)
$spitshell >>Makefile <<EOF
# Your locales are broken (osname $osname, osvers $osvers)
# and to avoid the numerous
# perl: warning: Setting locale failed.
# warnings during the build process we reset the locale variables.
LC_ALL=C
LANG=C
LANGUAGE=C
EOF
;;
esac
## In the following dollars and backticks do not need the extra backslash.
$spitshell >>Makefile <<'!NO!SUBS!'
CCCMD = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $@`
CCCMDSRC = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $<`
CONFIGPM = lib/Config.pm lib/Config_heavy.pl
private = preplibrary $(CONFIGPM) lib/Config.pod lib/ExtUtils/Miniperl.pm
# Files to be built with variable substitution before miniperl
# is available.
sh = Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH \
makedir.SH myconfig.SH writemain.SH pod/Makefile.SH
shextract = Makefile cflags config.h makeaperl makedepend \
makedir myconfig writemain pod/Makefile
# Files to be built with variable substitution after miniperl is
# available. Dependencies handled manually below (for now).
pl = pod/pod2html.PL pod/pod2latex.PL pod/pod2man.PL pod/pod2text.PL \
pod/pod2usage.PL pod/podchecker.PL pod/podselect.PL
# lib/lib.pm is not listed here because it has a rule of its own.
plextract = pod/pod2html pod/pod2latex pod/pod2man pod/pod2text \
pod/pod2usage pod/podchecker pod/podselect
addedbyconf = UU $(shextract) $(plextract) lib/lib.pm pstruct
# Unicode data files generated by mktables
unidatafiles = lib/unicore/Canonical.pl lib/unicore/Exact.pl \
lib/unicore/Properties lib/unicore/Decomposition.pl \
lib/unicore/CombiningClass.pl lib/unicore/Name.pl lib/unicore/PVA.pl
# Directories of Unicode data files generated by mktables
unidatadirs = lib/unicore/To lib/unicore/lib
h1 = EXTERN.h INTERN.h XSUB.h av.h config.h cop.h cv.h dosish.h
h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h opcode.h
h3 = pad.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h
h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h
h5 = utf8.h warnings.h
h = $(h1) $(h2) $(h3) $(h4) $(h5)
c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c reentr.c
c2 = perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c
c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c xsutils.c pad.c
c4 = globals.c perlio.c perlapi.c numeric.c mathoms.c locale.c pp_pack.c pp_sort.c
c = $(c1) $(c2) $(c3) $(c4) miniperlmain.c perlmain.c opmini.c
obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) pad$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT) reentr$(OBJ_EXT)
obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) perl$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) xsutils$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) mathoms$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT)
obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
lintflags = \
-b \
-n \
-p \
-Ncheck=%all \
-Nlevel=4 \
-errchk=parentheses \
-errhdr=%all \
-errfmt=src \
-errtags \
-erroff=E_ASSIGN_NARROW_CONV \
-erroff=E_BAD_PTR_CAST \
-erroff=E_BAD_PTR_CAST_ALIGN \
-erroff=E_BAD_PTR_INT_COMBINATION \
-erroff=E_BAD_SIGN_EXTEND \
-erroff=E_BLOCK_DECL_UNUSED \
-erroff=E_CASE_FALLTHRU \
-erroff=E_CONST_EXPR \
-erroff=E_CONSTANT_CONDITION \
-erroff=E_END_OF_LOOP_CODE_NOT_REACHED \
-erroff=E_EQUALITY_NOT_ASSIGNMENT \
-erroff=E_EXPR_NULL_EFFECT \
-erroff=E_FALSE_LOGICAL_EXPR \
-erroff=E_INCL_NUSD \
-erroff=E_LOOP_EMPTY \
-erroff=E_MAIN_PARAM \
-erroff=E_POINTER_TO_OBJECT \
-erroff=E_PTRDIFF_OVERFLOW \
-erroff=E_SHIFT_CNT_NEG_TOO_BIG_L \
-erroff=E_STATIC_UNUSED \
-erroff=E_TRUE_LOGICAL_EXPR
splintflags = \
-I/usr/lib/gcc/i486-linux-gnu/4.0.2/include/ \
-D__builtin_va_list=va_list \
-Dsigjmp_buf=jmp_buf \
-warnposix \
\
+boolint \
+charintliteral \
-fixedformalarray \
-mustfreefresh \
-nestedextern \
-predboolint \
-predboolothers \
-preproc \
-boolops \
-shadow \
-nullstate \
+longintegral \
+matchanyintegral \
-type \
\
+line-len 999 \
+weak
splintfiles = $(c1)
.c$(OBJ_EXT):
$(CCCMD) $(PLDLFLAGS) $*.c
.c.i:
$(CCCMDSRC) -E $*.c > $*.i
.c.s:
$(CCCMDSRC) -S $*.c
all: $(FIRSTMAKEFILE) miniperl$(EXE_EXT) extra.pods $(private) $(unidatafiles) $(public) $(dynamic_ext) $(nonxs_ext) extras.make
@echo " ";
@echo " Everything is up to date. Type '$(MAKE) test' to run test suite."
sperl$(OBJ_EXT): perl.c $(h)
$(RMS) sperl.c
$(LNS) perl.c sperl.c
$(CCCMD) -DIAMSUID sperl.c
$(RMS) sperl.c
sperl.i: perl.c $(h)
$(CCCMDSRC) -DIAMSUID -E perl.c > sperl.i
.PHONY: all compile translators utilities
compile: all
echo "testing compilation" > testcompile;
cd utils; $(MAKE) compile;
cd x2p; $(MAKE) compile;
cd pod; $(MAKE) compile;
translators: miniperl$(EXE_EXT) $(CONFIGPM) FORCE
@echo " "; echo " Making x2p stuff"; cd x2p; $(LDLIBPTH) $(MAKE) all
utilities: miniperl$(EXE_EXT) $(CONFIGPM) $(plextract) lib/lib.pm FORCE
@echo " "; echo " Making utilities"; cd utils; $(LDLIBPTH) $(MAKE) all
# This is now done by installman only if you actually want the man pages.
# @echo " "; echo " Making docs"; cd pod; $(MAKE) all;
# Phony target to force checking subdirectories.
# Apparently some makes require an action for the FORCE target.
.PHONY: FORCE
FORCE:
@sh -c true
!NO!SUBS!
$spitshell >>Makefile <<!GROK!THIS!
# We do a copy of the op.c instead of a symlink because gcc gets huffy
# if we have a symlink forest to another disk (it complains about too many
# levels of symbolic links, even if we have only two)
opmini.c: op.c
\$(RMS) opmini.c
\$(CPS) op.c opmini.c
opmini\$(OBJ_EXT): opmini.c
\$(CCCMD) \$(PLDLFLAGS) $DPERL_EXTERNAL_GLOB opmini.c
!GROK!THIS!
$spitshell >>Makefile <<'!NO!SUBS!'
miniperlmain$(OBJ_EXT): miniperlmain.c patchlevel.h
$(CCCMD) $(PLDLFLAGS) $*.c
perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE)
sh writemain $(DYNALOADER) $(static_ext) > perlmain.c
!NO!SUBS!
case "$osname" in
cygwin)
;; # Let cygwin/Makefile.SHs do its work.
*)
$spitshell >>Makefile <<'!NO!SUBS!'
perlmain$(OBJ_EXT): perlmain.c
$(CCCMD) $(PLDLFLAGS) $*.c
!NO!SUBS!
;;
esac
$spitshell >>Makefile <<'!NO!SUBS!'
# The file ext.libs is a list of libraries that must be linked in
# for static extensions, e.g. -lm -lgdbm, etc. The individual
# static extension Makefile's add to it.
ext.libs: $(static_ext)
-@test -f ext.libs || touch ext.libs
!NO!SUBS!
# How to build libperl. This is still rather convoluted.
# Load up custom Makefile.SH fragment for shared loading and executables:
case "$osname" in
*)
Makefile_s="$osname/Makefile.SHs"
;;
esac
case "$osname" in
aix)
$spitshell >>Makefile <<!GROK!THIS!
LIBS = $perllibs
# In AIX we need to change this for building Perl itself from
# its earlier definition (which is for building external
# extensions *after* Perl has been built and installed)
CCDLFLAGS = `echo $ccdlflags|sed -e 's@-bE:.*/perl\.exp@-bE:perl.exp@'`
!GROK!THIS!
case "$useshrplib" in
define|true|[yY]*)
$spitshell >>Makefile <<'!NO!SUBS!'
LIBPERL_NONSHR = libperl_nonshr$(LIB_EXT)
MINIPERL_NONSHR = miniperl_nonshr$(EXE_EXT)
$(LIBPERL_NONSHR): $(obj)
$(RMS) $(LIBPERL_NONSHR)
$(AR) rcu $(LIBPERL_NONSHR) $(obj)
$(MINIPERL_NONSHR): $(LIBPERL_NONSHR) miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT)
$(CC) $(LDFLAGS) -o $(MINIPERL_NONSHR) miniperlmain$(OBJ_EXT) \
opmini$(OBJ_EXT) $(LIBPERL_NONSHR) $(LIBS)
MINIPERLEXP = $(MINIPERL_NONSHR)
LIBPERLEXPORT = perl.exp
!NO!SUBS!
;;
*)
$spitshell >>Makefile <<'!NO!SUBS!'
MINIPERLEXP = miniperl$(EXE_EXT)
PERLEXPORT = perl.exp
!NO!SUBS!
;;
esac
$spitshell >>Makefile <<'!NO!SUBS!'
perl.exp: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH)
./$(MINIPERLEXP) makedef.pl PLATFORM=aix CC_FLAGS="$(OPTIMIZE)" | sort -u | sort -f > perl.exp
!NO!SUBS!
;;
os2)
$spitshell >>Makefile <<'!NO!SUBS!'
MINIPERLEXP = miniperl
perl5.def: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) miniperl.map
./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) CC_FLAGS="$(OPTIMIZE)" > perl5.def
!NO!SUBS!
;;
esac
if test -r $Makefile_s ; then
. $Makefile_s
$spitshell >>Makefile <<!GROK!THIS!
Makefile: $Makefile_s
!GROK!THIS!
else
$spitshell >>Makefile <<'!NO!SUBS!'
$(LIBPERL): $& $(obj) $(DYNALOADER) $(LIBPERLEXPORT)
!NO!SUBS!
case "$useshrplib" in
true)
$spitshell >>Makefile <<'!NO!SUBS!'
rm -f $@
$(LD) -o $@ $(SHRPLDFLAGS) $(obj) $(DYNALOADER) $(libs)
!NO!SUBS!
case "$osname" in
aix)
$spitshell >>Makefile <<'!NO!SUBS!'
rm -f libperl$(OBJ_EXT)
mv $@ libperl$(OBJ_EXT)
$(AR) qv $(LIBPERL) libperl$(OBJ_EXT)
!NO!SUBS!
;;
esac
;;
*)
$spitshell >>Makefile <<'!NO!SUBS!'
rm -f $(LIBPERL)
$(AR) rcu $(LIBPERL) $(obj) $(DYNALOADER)
@$(ranlib) $(LIBPERL)
!NO!SUBS!
;;
esac
$spitshell >>Makefile <<'!NO!SUBS!'
# How to build executables.
# The $& notation tells Sequent machines that it can do a parallel make,
# and is harmless otherwise.
# The miniperl -w -MExporter line is a basic cheap test to catch errors
# before make goes on to run preplibrary and then MakeMaker on extensions.
# This is very handy because later errors are often caused by miniperl
# build problems but that's not obvious to the novice.
# The Module used here must not depend on Config or any extensions.
!NO!SUBS!
case "${osname}${osvers}" in
aix*|beos*)
$spitshell >>Makefile <<'!NO!SUBS!'
miniperl: $& miniperlmain$(OBJ_EXT) $(obj) opmini$(OBJ_EXT)
$(CC) -o miniperl $(CLDFLAGS) \
`echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \
miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) $(libs)
$(LDLIBPTH) $(RUN) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
!NO!SUBS!
;;
next4*)
$spitshell >>Makefile <<'!NO!SUBS!'
miniperl: $& miniperlmain$(OBJ_EXT) $(obj) opmini$(OBJ_EXT)
$(CC) -o miniperl `echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \
miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) $(libs)
$(LDLIBPTH) $(RUN) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
!NO!SUBS!
;;
darwin*)
case "$osvers" in
[1-6].*) ;;
*) case "$ldflags" in
*"-flat_namespace"*) ;;
*) # to allow opmini.o to override stuff in libperl.dylib
$spitshell >>Makefile <<!NO!SUBS!
NAMESPACEFLAGS = -force_flat_namespace
!NO!SUBS!
;;
esac
;;
esac
$spitshell >>Makefile <<'!NO!SUBS!'
miniperl$(EXE_EXT): $& miniperlmain$(OBJ_EXT) $(obj) opmini$(OBJ_EXT)
-@rm -f miniperl.xok
$(CC) $(CLDFLAGS) $(NAMESPACEFLAGS) -o miniperl \
`echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \
miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) $(libs)
$(LDLIBPTH) $(RUN) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
!NO!SUBS!
;;
*)
$spitshell >>Makefile <<'!NO!SUBS!'
miniperl$(EXE_EXT): $& miniperlmain$(OBJ_EXT) $(obj) opmini$(OBJ_EXT)
-@rm -f miniperl.xok
$(LDLIBPTH) $(CC) $(CLDFLAGS) -o miniperl \
`echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \
miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) $(libs)
$(LDLIBPTH) $(RUN) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
!NO!SUBS!
;;
esac
$spitshell >>Makefile <<'!NO!SUBS!'
perl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
-@rm -f miniperl.xok
$(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX) $(PERL_PROFILE_LDFLAGS) $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
# Purify/Quantify Perls.
pureperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
$(SHRPENV) $(LDLIBPTH) purify $(CC) -o pureperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
purecovperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
$(SHRPENV) $(LDLIBPTH) purecov $(CC) -o purecovperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
quantperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
$(SHRPENV) $(LDLIBPTH) quantify $(CC) -o quantperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
# Valgrind perl (currently Linux only)
perl.valgrind.config: config.sh
@echo "To build perl.valgrind you must Configure -Doptimize=-g -Uusemymalloc, checking..."
@$(MAKE) perl.config.dashg
@echo "Checking usemymalloc='n' in config.sh..."
@grep "^usemymalloc=" config.sh
@grep "^usemymalloc='n'" config.sh >/dev/null || exit 1
@echo "And of course you have to have valgrind..."
$(VALGRIND) ./perl -e 1 2>/dev/null || exit 1
# Third Degree Perl (Tru64 only)
perl.config.dashg:
@echo "Checking optimize='-g' in config.sh..."
@grep "^optimize=" config.sh
@egrep "^optimize='(.*-g.*)'" config.sh >/dev/null || exit 1
perl.third.config: config.sh
@echo "To build perl.third you must Configure -Doptimize=-g -Uusemymalloc, checking..."
@$(MAKE) perl.config.dashg
@echo "Checking usemymalloc='n' in config.sh..."
@grep "^usemymalloc=" config.sh
@grep "^usemymalloc='n'" config.sh >/dev/null || exit 1
perl.third: /usr/bin/atom perl.third.config perl
atom -tool third -L. -all -gp -toolargs="-invalid -uninit heap+stack+copy -min 0" perl
@echo "Now you may run perl.third and then study perl.3log."
# Pixie Perls (Tru64 and IRIX only)
perl.pixie.config: config.sh
@echo "To build perl.pixie you must Configure -Doptimize=-g, checking..."
@$(MAKE) perl.config.dashg
perl.pixie.atom: /usr/bin/atom perl
atom -tool pixie -L. -all -toolargs="-quiet" perl
perl.pixie.irix: perl
pixie perl
perl.pixie: /usr/bin/pixie perl.pixie.config perl
if test -x /usr/bin/atom; then \
$(MAKE) perl.pixie.atom; \
else \
$(MAKE) perl.pixie.irix; \
fi
@echo "Now you may run perl.pixie and then run pixie."
# Gprof Perl
perl.config.dashpg:
@echo "Checking optimize='-pg' in config.sh..."
@grep "^optimize=" config.sh
@grep "^optimize='.*-pg.*'" config.sh >/dev/null || exit 1
perl.gprof.config: config.sh
@echo "To build perl.gprof you must Configure -Doptimize=-pg, checking..."
@$(MAKE) perl.config.dashpg
perl.gprof: /usr/bin/gprof perl.gprof.config
@-rm -f perl
$(MAKE) PERL_SUFFIX=.gprof PERL_PROFILE_LDFLAGS=-pg perl
@echo "Now you may run perl.gprof and then run gprof perl.gprof."
# Gcov Perl
perl.config.gcov:
@echo "To build perl.gcov you must use gcc 3.0 or newer, checking..."
@echo "Checking gccversion in config.sh..."
@grep "^gccversion=" config.sh
@grep "^gccversion='[3-9]\." config.sh >/dev/null || exit 1
@echo "To build perl.gcov you must Configure -Dccflags=-fprofile-arcs -ftest-coverage, checking..."
@echo "Checking ccflags='-fprofile-arcs -ftest-coverage' in config.sh..."
@grep "^ccflags=" config.sh
@grep "^ccflags='.*-fprofile-arcs -ftest-coverage.*'" config.sh >/dev/null || exit 1
perl.gcov: perl.config.gcov
@-rm -f perl
$(MAKE) PERL_SUFFIX=.gcov PERL_PROFILE_LDFLAGS='' perl
@echo "Now you may run perl.gcov and then run gcov some.c."
# Microperl. This is just a convenience thing if one happens to
# build also the full Perl and therefore the real big Makefile:
# usually one should manually explicitly issue the below command.
.PHONY: microperl
microperl:
$(MAKE) -f Makefile.micro
# This version, if specified in Configure, does ONLY those scripts which need
# set-id emulation. Suidperl must be setuid root. It contains the "taint"
# checks as well as the special code to validate that the script in question
# has been invoked correctly.
!NO!SUBS!
case "${osname}" in
aix*)
$spitshell >>Makefile <<'!NO!SUBS!'
suidperl$(EXE_EXT): $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
$(SHRPENV) $(LDLIBPTH) $(CC) -o suidperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(static_ext) $(LLIBPERL_NONSHR) $(LLIBPERL) `cat ext.libs` $(libs)
!NO!SUBS!
;;
*)
$spitshell >>Makefile <<'!NO!SUBS!'
suidperl$(EXE_EXT): $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(LIBPERL) $(static_ext) ext.libs $(PERLEXPORT)
$(SHRPENV) $(LDLIBPTH) $(CC) -o suidperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
!NO!SUBS!
;;
esac
fi
# Some environment have no system(), which mkpport uses.
# Let's try running the commands with shell.
case "${osname}" in
catamount)
$spitshell >>Makefile <<!GROK!THIS!
.PHONY: makeppport
makeppport: miniperl\$(EXE_EXT) \$(CONFIGPM)
-@for f in Makefile.PL PPPort_pm.PL PPPort_xs.PL ppport_h.PL; do \
(cd ext/Devel/PPPort && `pwd`/run.sh ../../../miniperl -I../../../lib \$\$f); \
done
!GROK!THIS!
;;
*)
$spitshell >>Makefile <<'!NO!SUBS!'
.PHONY: makeppport
makeppport: miniperl$(EXE_EXT) $(CONFIGPM)
$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib mkppport
!NO!SUBS!
;;
esac
$spitshell >>Makefile <<'!NO!SUBS!'
# We have to call our ./makedir because Ultrix 4.3 make can't handle the line
# test -d lib/auto || mkdir lib/auto
# We need to autosplit in two steps because VOS can't handle so many args
#
.PHONY: preplibrary
preplibrary: miniperl$(EXE_EXT) $(CONFIGPM) lib/lib.pm $(PREPLIBRARY_LIBPERL)
@sh ./makedir lib/auto
@echo " AutoSplitting perl library"
$(LDLIBPTH) $(RUN) ./miniperl -Ilib -e 'use AutoSplit; \
autosplit_lib_modules(@ARGV)' lib/*.pm
$(LDLIBPTH) $(RUN) ./miniperl -Ilib -e 'use AutoSplit; \
autosplit_lib_modules(@ARGV)' lib/*/*.pm
$(MAKE) lib/re.pm
lib/Config.pod: config.sh miniperl$(EXE_EXT) configpm Porting/Glossary
$(LDLIBPTH) $(RUN) ./miniperl -Ilib configpm
$(CONFIGPM): lib/Config.pod
lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl$(EXE_EXT) minimod.pl $(CONFIGPM)
$(LDLIBPTH) $(RUN) ./miniperl minimod.pl > lib/ExtUtils/Miniperl.pm
lib/re.pm: ext/re/re.pm
@-rm -f $@
cp ext/re/re.pm lib/re.pm
$(plextract): miniperl$(EXE_EXT) $(CONFIGPM) x2p/s2p
@-rm -f $@
$(LDLIBPTH) $(RUN) ./miniperl -I`pwd`/lib $@.PL
x2p/s2p: miniperl$(EXE_EXT) $(CONFIGPM) x2p/s2p.PL
cd x2p; $(LDLIBPTH) $(MAKE) s2p
lib/lib.pm: miniperl$(EXE_EXT) $(CONFIGPM)
@-rm -f $@
$(LDLIBPTH) $(RUN) ./miniperl -Ilib lib/lib_pm.PL
unidatafiles $(unidatafiles): uni.data
uni.data: miniperl$(EXE_EXT) $(CONFIGPM) lib/unicore/mktables
cd lib/unicore && $(LDLIBPTH) $(RUN) ../../miniperl -I../../lib mktables -w
touch uni.data
extra.pods: miniperl$(EXE_EXT)
-@test ! -f extra.pods || rm -f `cat extra.pods`
-@rm -f extra.pods
-@for x in `grep -l '^=[a-z]' README.* | grep -v README.vms` ; do \
nx=`echo $$x | sed -e "s/README\.//"`; \
cd pod ; $(LNS) ../$$x "perl"$$nx".pod" ; cd .. ; \
echo "pod/perl"$$nx".pod" >> extra.pods ; \
done
-@rm -f pod/perlvms.pod
-@test -f vms/perlvms.pod && cd pod && $(LNS) ../vms/perlvms.pod perlvms.pod && cd .. && echo "pod/perlvms.pod" >> extra.pods
-@rm -f pod/perldelta.pod
-@test -f pod/perl5810delta.pod && cd pod && $(LNS) perl5810delta.pod perldelta.pod && cd .. && echo "pod/perldelta.pod" >> extra.pods # See buildtoc
extras.make: perl$(EXE_EXT)
-@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) $(RUN) ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst`
extras.test: perl$(EXE_EXT)
-@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) $(RUN) ./perl -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst`
extras.install: perl$(EXE_EXT)
-@test ! -s extras.lst || PATH="`pwd`:${PATH}" PERL5LIB="`pwd`/lib" $(LDLIBPTH) $(RUN) ./perl -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst`
.PHONY: install install-strip install-all install-verbose install-silent \
no-install install.perl install.man install.html
META.yml: Porting/makemeta Porting/Maintainers.pl Porting/Maintainers.pm
$(LDLIBPTH) $(RUN) ./miniperl -Ilib Porting/makemeta
install-strip:
$(MAKE) STRIPFLAGS=-s install DESTDIR="$(DESTDIR)"
install install-all:
$(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) DESTDIR="$(DESTDIR)"
install-verbose:
$(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-V DESTDIR="$(DESTDIR)"
install-silent:
$(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-S DESTDIR="$(DESTDIR)"
no-install:
$(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-n DESTDIR="$(DESTDIR)"
# Set this to an empty string to avoid an attempt of rebuild before install
INSTALL_DEPENDENCE = all
install.perl: $(INSTALL_DEPENDENCE) installperl
if [ -n "$(COMPILE)" ]; \
then \
cd utils; $(MAKE) compile; \
cd ../x2p; $(MAKE) compile; \
cd ../pod; $(MAKE) compile; \
else :; \
fi
$(LDLIBPTH) $(RUN) ./perl installperl --destdir=$(DESTDIR) $(INSTALLFLAGS) $(STRIPFLAGS)
-@test ! -s extras.lst || $(MAKE) extras.install
install.man: all installman
$(LDLIBPTH) $(RUN) ./perl installman --destdir=$(DESTDIR) $(INSTALLFLAGS)
# XXX Experimental. Hardwired values, but useful for testing.
# Eventually Configure could ask for some of these values.
install.html: all installhtml
-@test -f README.vms && cd vms && $(LNS) ../README.vms README_vms.pod && cd ..
$(LDLIBPTH) $(RUN) ./perl installhtml \
--podroot=. --podpath=. --recurse \
--htmldir=$(privlib)/html \
--htmlroot=$(privlib)/html \
--splithead=pod/perlipc \
--splititem=pod/perlfunc \
--libpods=perlfunc:perlguts:perlvar:perlrun:perlop \
--ignore=Porting/Maintainers.pm,Porting/patching.pod,Porting/pumpkin.pod,Porting/repository.pod \
--verbose
# I now supply perly.c with the kits, so the following section is
# used only if you force byacc to run by saying
# make run_byacc
# Since we patch up the byacc output, the perly.fixer script needs
# to run with precisely the same version of byacc as I use. You
# normally shouldn't remake perly.[ch].
.PHONY: check_byacc run_byacc
check_byacc:
@$(BYACC) -V 2>&1 | grep 'version 1\.8\.2'
run_byacc: FORCE check_byacc
$(BYACC) -d perly.y
-chmod 664 perly.c perly.h
sh $(shellflags) ./perly.fixer y.tab.c perly.c
sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
-e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c
sed -e '/^extern YYSTYPE yy/D' y.tab.h >yh.tmp && mv yh.tmp y.tab.h
cmp -s y.tab.h perly.h && rm -f y.tab.h || mv y.tab.h perly.h
perl -i.old perlyline.pl perly.c
chmod 664 vms/perly_c.vms vms/perly_h.vms
perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms
# We don't want to regenerate perly.c and perly.h, but they might
# appear out-of-date after a patch is applied or a new distribution is
# made.
perly.c: perly.y
-@sh -c true
perly.h: perly.y
-@sh -c true
PERLYVMS = vms/perly_c.vms vms/perly_h.vms
$(PERLYVMS): perly.c perly.h vms/vms_yfix.pl
perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms
# No compat3.sym here since and including the 5.004_50.
# No interp.sym since 5.005_03.
SYM = global.sym globvar.sym perlio.sym pp.sym
SYMH = perlvars.h intrpvar.h thrdvar.h
CHMOD_W = chmod +w
# The following files are generated automatically
# autodoc.pl: pod/perlapi.pod pod/perlintern.pod
# bytecode.pl: ext/ByteLoader/byterun.h ext/ByteLoader/byterun.c
# ext/B/B/Asmdata.pm
# embed.pl: proto.h embed.h embedvar.h global.sym
# perlapi.h perlapi.c
# [* embed.pl needs pp.sym generated by opcode.pl! *]
# keywords.pl: keywords.h
# opcode.pl: opcode.h opnames.h pp_proto.h pp.sym
# regcomp.pl: regnodes.h
# warnings.pl: warnings.h lib/warnings.pm
# The correct versions should be already supplied with the perl kit,
# in case you don't have perl available.
# To force them to be regenerated, run
# perl regen.pl
# with your existing copy of perl
# (make regen_headers is kept for backwards compatibility)
AUTOGEN_FILES = keywords.h opcode.h opnames.h pp_proto.h pp.sym proto.h \
embed.h embedvar.h global.sym \
pod/perlintern.pod pod/perlapi.pod \
perlapi.h perlapi.c ext/ByteLoader/byterun.h \
ext/ByteLoader/byterun.c ext/B/B/Asmdata.pm regnodes.h \
warnings.h lib/warnings.pm
.PHONY: regen_headers regen_pods regen_all
regen regen_headers: FORCE
-perl regen.pl
regen_pods: FORCE
-cd pod; $(LDLIBPTH) $(MAKE) regen_pods
regen_all: $(PERLYVMS) regen regen_pods
.PHONY: manisort manicheck
manisort: FORCE
LC_ALL=C sort -fdc MANIFEST || (echo "WARNING: re-sorting MANIFEST"; \
LC_ALL=C sort -fdo MANIFEST MANIFEST)
manicheck: FORCE
perl Porting/manicheck
# Extensions:
# Names added to $(dynamic_ext) or $(static_ext) or $(nonxs_ext) will
# automatically get built. There should ordinarily be no need to change
# any of this part of makefile.
#
# The dummy dependency is a place holder in case $(dynamic_ext) or
# $(static_ext) is empty.
#
# DynaLoader may be needed for extensions that use Makefile.PL.
$(DYNALOADER): miniperl$(EXE_EXT) preplibrary FORCE
@$(LDLIBPTH) sh ext/util/make_ext $(STATIC) $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
d_dummy $(dynamic_ext): miniperl$(EXE_EXT) preplibrary makeppport $(DYNALOADER) FORCE
@$(LDLIBPTH) sh ext/util/make_ext dynamic $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
s_dummy $(static_ext): miniperl$(EXE_EXT) preplibrary makeppport $(DYNALOADER) FORCE
@$(LDLIBPTH) sh ext/util/make_ext $(STATIC) $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
n_dummy $(nonxs_ext): miniperl$(EXE_EXT) preplibrary FORCE
@$(LDLIBPTH) sh ext/util/make_ext nonxs $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)
!NO!SUBS!
$spitshell >>Makefile <<EOF
$extra_dep
EOF
$spitshell >>Makefile <<'!NO!SUBS!'
.PHONY: printconfig
printconfig:
@eval `$(LDLIBPTH) $(RUN) ./perl -Ilib -V:$(CONFIGVAR)`; echo $$$(CONFIGVAR)
.PHONY: clean _tidy _mopup _cleaner1 _cleaner2 \
realclean _realcleaner clobber _clobber \
distclean veryclean _verycleaner \
cleanup_unpacked_files unpack_files
clean: cleanup_unpacked_files _tidy _mopup
realclean: cleanup_unpacked_files _realcleaner _mopup
@echo "Note that '$(MAKE) realclean' does not delete config.sh or Policy.sh"
_clobber:
-@rm -f Cross/run-* Cross/to-* Cross/from-*
rm -f config.sh cppstdin Policy.sh extras.lst
clobber: cleanup_unpacked_files _realcleaner _mopup _clobber
distclean: clobber
# Like distclean but also removes emacs backups and *.orig.
veryclean: cleanup_unpacked_files _verycleaner _mopup _clobber
-@rm -f Obsolete Wanted
# Do not 'make _mopup' directly.
_mopup:
rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c opmini.c
-rmdir .depending
-@test -f extra.pods && rm -f `cat extra.pods`
-@test -f vms/README_vms.pod && rm -f vms/README_vms.pod
-rm -f perl.exp ext.libs extra.pods uni.data opmini.o
-rm -f perl.export perl.dll perl.libexp perl.map perl.def
-rm -f perl.loadmap miniperl.loadmap perl.prelmap miniperl.prelmap
-rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log
-rm -f perl.pixie lib*.so.perl.pixie lib*.so.Addrs
-rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts *perl.xok
-rm -f cygwin.c libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump
-rm -f perl$(EXE_EXT) suidperl$(EXE_EXT) miniperl$(EXE_EXT) $(LIBPERL) libperl.* microperl
-rm -f opcode.h-old opnames.h-old pp.sym-old pp_proto.h-old
-rm -f config.arch config.over
# Do not 'make _tidy' directly.
_tidy:
-cd pod; $(LDLIBPTH) $(MAKE) clean
-cd utils; $(LDLIBPTH) $(MAKE) clean
-cd x2p; $(LDLIBPTH) $(MAKE) clean
-@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \
$(LDLIBPTH) sh ext/util/make_ext clean $$x MAKE=$(MAKE) ; \
done
rm -f testcompile compilelog
_cleaner1:
-cd os2; rm -f Makefile
-cd pod; $(LDLIBPTH) $(MAKE) $(CLEAN)
-cd utils; $(LDLIBPTH) $(MAKE) $(CLEAN)
-cd x2p; $(LDLIBPTH) $(MAKE) $(CLEAN)
-@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \
$(LDLIBPTH) sh ext/util/make_ext $(CLEAN) $$x MAKE=$(MAKE) ; \
done
-@test ! -f $(RUN) ./miniperl$(EXE_EXT) || $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib mkppport --clean
# Some systems do not support "?", so keep these files separate.
_cleaner2:
-rm -f core.*perl.*.? t/core.perl.*.? .?*.c
rm -f core *perl.core t/core t/*perl.core core.* t/core.*
rm -f t/misctmp* t/forktmp* t/tmp* t/c t/perl$(EXE_EXT) t/rantests
rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
rm -rf $(addedbyconf)
rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old makefile.old
rm -f $(private)
rm -rf $(unidatafiles) $(unidatadirs)
rm -rf lib/auto
rm -f lib/.exists lib/*/.exists lib/*/*/.exists
rm -f h2ph.man pstruct
rm -rf .config
rm -f preload lib/re.pm
rm -f testcompile compilelog
rm -rf lib/Encode lib/Hash lib/re
rm -rf lib/Module/Pluggable
rm -f lib/ExtUtils/ParseXS/t/XSTest.c
rm -f lib/ExtUtils/ParseXS/t/XSTest$(OBJ_EXT)
rm -f lib/ExtUtils/ParseXS/t/XSTest$(DLSUFFIX)
rm -fr lib/B
-rmdir lib/Data
-rmdir lib/Filter/Util lib/IO/Socket lib/IO
-rmdir lib/List lib/MIME lib/Scalar lib/Sys
-rmdir lib/threads lib/XS
-rm -f cygcrypt-0.dll cygwin1.dll
-rm -f lib/ExtUtils/ParseXS/t/libXSTest.dll.a
_realcleaner:
@$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=realclean
@$(LDLIBPTH) $(MAKE) _cleaner2
_verycleaner:
@$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=veryclean
@$(LDLIBPTH) $(MAKE) _cleaner2
-rm -f *~ *.orig */*~ */*.orig */*/*~ */*/*.orig
.PHONY: lint
lint: $(c)
rm -f *.ln
lint $(lintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(c)
.PHONY: splint
splint: $(c)
splint $(splintflags) -DPERL_CORE -D_REENTRANT -DDEBUGGING -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 $(splintfiles)
# Need to unset during recursion to go out of loop.
# The README below ensures that the dependency list is never empty and
# that when MAKEDEPEND is empty $(FIRSTMAKEFILE) doesn't need rebuilding.
MAKEDEPEND = Makefile makedepend
$(FIRSTMAKEFILE): README $(MAKEDEPEND)
$(MAKE) depend MAKEDEPEND=
config.h: config_h.SH config.sh
$(SHELL) config_h.SH
# When done, touch perlmain.c so that it doesn't get remade each time.
.PHONY: depend
depend: makedepend
sh ./makedepend MAKE=$(MAKE)
- test -s perlmain.c && touch perlmain.c
cd x2p; $(MAKE) depend
# Cannot postpone this until $firstmakefile is ready ;-)
makedepend: makedepend.SH config.sh
sh ./makedepend.SH
.PHONY: test check test_prep test_prep_nodll test_prep_pre _test_prep \
test_tty test-tty _test_tty test_notty test-notty _test_notty \
utest ucheck test.utf8 check.utf8 test.torture torturetest \
test.utf16 check.utf16 utest.utf16 ucheck.utf16 \
test.third check.third utest.third ucheck.third test_notty.third \
test.deparse test_notty.deparse test_harness test_harness_notty \
test.bytecompile minitest coretest test.taintwarn test-reonly
# Cannot delegate rebuilding of t/perl to make
# to allow interlaced test and minitest
TESTFILE=TEST
_test_prep: unpack_files
cd t && (rm -f $(PERL)$(EXE_EXT); $(LNS) ../$(PERL)$(EXE_EXT) $(PERL)$(EXE_EXT))
# Architecture-neutral stuff:
test_prep_pre: preplibrary utilities $(nonxs_ext)
test_prep: test_prep_pre miniperl$(EXE_EXT) $(unidatafiles) perl$(EXE_EXT) $(dynamic_ext) $(TEST_PERL_DLL)
PERL=./perl $(MAKE) _test_prep
_test_tty:
cd t && $(PERL_DEBUG) $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS) $(TEST_FILES) </dev/tty
_test_notty:
cd t && $(PERL_DEBUG) PERL_SKIP_TTY_TEST=1 $(LDLIBPTH) $(PERL) $(TESTFILE) $(TEST_ARGS) $(TEST_FILES)
unpack_files:
$(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib uupacktool.pl -u -m
cleanup_unpacked_files:
-@test ! -f $(RUN) ./miniperl$(EXE_EXT) || $(LDLIBPTH) $(RUN) ./miniperl$(EXE_EXT) -Ilib uupacktool.pl -c
# The second branch is for testing without a tty or controlling terminal,
# see t/op/stat.t
_test:
if (true </dev/tty) >/dev/null 2>&1; then \
$(MAKE) TEST_ARGS='$(TEST_ARGS)' TESTFILE=$(TESTFILE) _test_tty ; \
else \
$(MAKE) TEST_ARGS='$(TEST_ARGS)' TESTFILE=$(TESTFILE) _test_notty ; \
fi
@echo "Ran tests" > t/rantests
test check: test_prep
PERL=./perl $(MAKE) _test
test_tty: test_prep
PERL=./perl $(MAKE) _test_tty
test_notty: test_prep
PERL=./perl $(MAKE) _test_notty
utest ucheck test.utf8 check.utf8: test_prep
PERL=./perl TEST_ARGS=-utf8 $(MAKE) _test
coretest: test_prep
PERL=./perl TEST_ARGS=-core $(MAKE) _test
test-prep: test_prep
test-tty: test_tty
test-notty: test_notty
# Torture testing
test.torture torturetest: test_prep
PERL=./perl TEST_ARGS=-torture $(MAKE) _test
# Targets for UTF16 testing:
minitest.utf16: minitest.prep
- cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
&& $(LDLIBPTH) $(RUN) ./perl TEST -minitest -utf16 base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty
test.utf16 check.utf16: test_prep
PERL=./perl $(MAKE) TEST_ARGS=-utf16 _test
utest.utf16 ucheck.utf16: test_prep
PERL=./perl $(MAKE) TEST_ARGS="-utf8 -utf16" _test
# Targets for valgrind testing:
test_prep.valgrind: test_prep perl.valgrind
PERL=./perl $(MAKE) _test_prep
test.valgrind check.valgrind: test_prep perl.valgrind.config
PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 VALGRIND='$(VALGRIND)' $(MAKE) _test
utest.valgrind ucheck.valgrind: test_prep.valgrind perl.valgrind.config
PERL=./perl PERL_DEBUG=PERL_VALGRIND=1 TEST_ARGS=-utf8 $(MAKE) _test
test_notty.valgrind: test_prep.valgrind perl.valgrind.config
PERL=./perl $(MAKE) PERL_DEBUG=PERL_VALGRIND=1 _test_notty
# Targets for Third Degree testing.
test_prep.third: test_prep perl.third
PERL=./perl.third $(MAKE) _test_prep
test.third check.third: test_prep.third perl.third
PERL=./perl.third PERL_DEBUG=PERL_3LOG=1 $(MAKE) _test
utest.third ucheck.third: test_prep.third perl.third
PERL=./perl.third PERL_DEBUG=PERL_3LOG=1 TEST_ARGS=-utf8 $(MAKE) _test
test_notty.third: test_prep.third perl.third
PERL=./perl.third $(MAKE) PERL_DEBUG=PERL_3LOG=1 _test_notty
# Targets for Bytecode/ByteLoader testing.
test.bytecompile: test_prep
PERL=./perl TEST_ARGS=-bytecompile $(MAKE) _test
# Targets for Deparse testing.
test.deparse: test_prep
PERL=./perl TEST_ARGS=-deparse $(MAKE) _test
test_notty.deparse: test_prep
PERL=./perl TEST_ARGS=-deparse $(MAKE) _test_notty
# Targets to run the test suite with -t
test.taintwarn: test_prep
PERL=./perl TEST_ARGS=-taintwarn $(MAKE) _test
minitest.prep:
-@test -f lib/lib.pm && test -f lib/Config.pm || \
$(MAKE) lib/Config.pm lib/lib.pm $(unidatafiles)
@echo " "
@echo "You may see some irrelevant test failures if you have been unable"
@echo "to build lib/Config.pm, lib/lib.pm or the Unicode data files."
@echo " "
# Can't depend on lib/Config.pm because that might be where miniperl
# is crashing.
minitest: miniperl$(EXE_EXT) lib/re.pm minitest.prep
- cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
&& $(LDLIBPTH) $(RUN) ./perl TEST -minitest base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty
# Test via harness
test_harness: test_prep
PERL=./perl $(MAKE) TESTFILE=harness _test
test_harness_notty: test_prep
PERL=./perl HARNESS_NOTTY=1 $(MAKE) TESTFILE=harness _test
test-reonly: test_prep
PERL=./perl TEST_ARGS='-re \\bpat\\b \\breg \\bre\b \\bsubst \\brxcode' $(MAKE) TESTFILE=harness _test
# Handy way to run perlbug -ok without having to install and run the
# installed perlbug. We don't re-run the tests here - we trust the user.
# Please *don't* use this unless all tests pass.
# If you want to report test failures, use "make nok" instead.
.PHONY: ok okfile oknack okfilenack nok nokfile noknack nokfilenack
ok: utilities
$(LDLIBPTH) $(RUN) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)'
okfile: utilities
$(LDLIBPTH) $(RUN) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok
oknack: utilities
$(LDLIBPTH) $(RUN) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -A
okfilenack: utilities
$(LDLIBPTH) $(RUN) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok -A
nok: utilities
$(LDLIBPTH) $(RUN) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)'
nokfile: utilities
$(LDLIBPTH) $(RUN) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok
noknack: utilities
$(LDLIBPTH) $(RUN) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -A
nokfilenack: utilities
$(LDLIBPTH) $(RUN) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok -A
.PHONY: clist hlist shlist pllist
clist: $(c)
echo $(c) | tr ' ' $(TRNL) >.clist
hlist: $(h)
echo $(h) | tr ' ' $(TRNL) >.hlist
shlist: $(sh)
echo $(sh) | tr ' ' $(TRNL) >.shlist
pllist: $(pl)
echo $(pl) | tr ' ' $(TRNL) >.pllist
Makefile: Makefile.SH ./config.sh
$(SHELL) Makefile.SH
.PHONY: distcheck
distcheck: FORCE
perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()'
.PHONY: elc
elc: emacs/cperl-mode.elc
emacs/cperl-mode.elc: emacs/cperl-mode.el
-cd emacs; emacs -batch -q -no-site-file -f batch-byte-compile cperl-mode.el
.PHONY: etags ctags tags
etags: TAGS
TAGS: emacs/cperl-mode.elc
sh emacs/ptags
# Let's hope make will not go into an infinite loop on case-unsensitive systems
# This may also fail if . is in the head of the path, since perl will
# require -Ilib
tags: TAGS
perl emacs/e2ctags.pl TAGS > tags
ctags:
ctags -f Tags -N --totals --languages=c --langmap=c:+.h --exclude=opmini.c *.c *.h
# AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
# If this runs make out of memory, delete /usr/include lines.
!NO!SUBS!
$eunicefix Makefile
case `pwd` in
*SH)
$rm -f ../Makefile
$ln Makefile ../Makefile
;;
esac
$rm -f $firstmakefile
# Now do any special processing required before building.
case "$ebcdic" in
define)
xxx=''
echo "This is an EBCDIC system, checking if any parser files need regenerating." >&2
case "$osname" in
os390|posix-bc)
rm -f y.tab.c y.tab.h
# yacc must be a reentrant ("pure") Bison in BS2000 Posix!
yacc -d perly.y >/dev/null 2>&1
if cmp -s y.tab.c perly.c; then
rm -f y.tab.c
else
echo "perly.y -> perly.c" >&2
mv -f y.tab.c perly.c
chmod u+w perly.c
sed -e '/^#include "perl\.h"/a\
\
#define yydebug PL_yydebug\
#define yynerrs PL_yynerrs\
#define yyerrflag PL_yyerrflag\
#define yychar PL_yychar\
#define yyval PL_yyval\
#define yylval PL_yylval' \
-e '/YYSTYPE *yyval;/D' \
-e '/YYSTYPE *yylval;/D' \
-e '/int yychar,/,/yynerrs;/D' \
-e 's/int yydebug = 0;/yydebug = 0;/' \
-e 's/[^_]realloc(/PerlMem_realloc(/g' \
-e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
-e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c
xxx="$xxx perly.c"
fi
case "$osname:$usethreads" in
os390:define)
sed -e 's@^extern int yychar, yyerrflag;@/* extern int yychar, yyerrflag; */@' perly.c > perly.tmp && mv perly.tmp perly.c
;;
esac
if cmp -s y.tab.h perly.h; then
rm -f y.tab.h
else
echo "perly.y -> perly.h" >&2
mv -f y.tab.h perly.h
xxx="$xxx perly.h"
fi
if cd x2p
then
rm -f y.tab.c y.tab.h
case "$osname" in
posix-bc)
# we are using two different yaccs in BS2000 Posix!
byacc a2p.y >/dev/null 2>&1
;;
*) # e.g. os390
yacc a2p.y >/dev/null 2>&1
;;
esac
if cmp -s y.tab.c a2p.c
then
rm -f y.tab.c
else
echo "a2p.y -> a2p.c" >&2
mv -f y.tab.c a2p.c
chmod u+w a2p.c
sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
-e 's|^static void __YY_YACC_MAIN.*BS2000.*|/*static main deleted*/|' \
-e 's/y\.tab/a2p/g' a2p.c >a2p.tmp && mv a2p.tmp a2p.c
xxx="$xxx a2p.c"
fi
# In case somebody yacc -d:ed the a2p.y.
if test -f y.tab.h
then
if cmp -s y.tab.h a2p.h
then
rm -f y.tab.h
else
echo "a2p.h -> a2p.h" >&2
mv -f y.tab.h a2p.h
xxx="$xxx a2p.h"
fi
fi
cd ..
fi
;;
vmesa)
# Do nothing in VM/ESA.
;;
*)
echo "'$osname' is an EBCDIC system I don't know that well." >&4
;;
esac
case "$xxx" in
'') echo "No parser files were regenerated. That's okay." >&2 ;;
esac
;;
esac
# ex: set ts=8 sts=4 sw=4 noet:
Jump to Line
Something went wrong with that request. Please try again.