Skip to content
This repository

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
tag: perl-5.7.3
Fetching contributors…

Octocat-spinner-32-eaf2f5

Cannot retrieve contributors at this time

file 1253 lines (1011 sloc) 38.35 kb
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252
#! /bin/sh
case $PERL_CONFIG_SH in
'')
if test -f config.sh
then TOP=.
else
echo "Can't find config.sh."; exit 1
fi
. $TOP/config.sh
;;
esac
: This forces SH files to create target in same directory as SH file.
: This is so that make depend always knows where to find SH derivatives.
case "$0" in
*/*) cd `expr X$0 : 'X\(.*\)/'` ;;
esac

case "$d_dosuid" in
*define*) suidperl='suidperl' ;;
*) suidperl='';;
esac

linklibperl='$(LIBPERL)'
shrpldflags='$(LDDLFLAGS)'
ldlibpth=''
DPERL_EXTERNAL_GLOB='-DPERL_EXTERNAL_GLOB'
case "$useshrplib" in
true)
# Prefix all runs of 'miniperl' and 'perl' with
# $ldlibpth so that ./perl finds *this* shared libperl.
case "$LD_LIBRARY_PATH" in
'')
ldlibpth="LD_LIBRARY_PATH=`pwd`";;
*)
ldlibpth="LD_LIBRARY_PATH=`pwd`:${LD_LIBRARY_PATH}";;
esac

pldlflags="$cccdlflags"
case "${osname}${osvers}" in
next4*)
ld=libtool
lddlflags="-dynamic -undefined warning -framework System \
-compatibility_version 1 -current_version $patchlevel \
-prebind -seg1addr 0x27000000 -install_name \$(shrpdir)/\$@"
;;
rhapsody*|darwin*)
shrpldflags="${ldflags} -dynamiclib \
                            -compatibility_version \
${api_revision}.${api_version}.${api_subversion} \
-current_version \
${revision}.${patchlevel}.${subversion} \
-install_name \$(shrpdir)/\$@"
;;
cygwin*)
linklibperl="-lperl"
;;
sunos*)
linklibperl="-lperl"
;;
netbsd*|freebsd[234]*|openbsd*)
linklibperl="-L. -lperl"
;;
aix*)
shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp"
case "$osvers" in
3*) shrpldflags="$shrpldflags -e _nostart"
;;
*) shrpldflags="$shrpldflags -b noentry"
;;
esac
shrpldflags="$shrpldflags $ldflags $perllibs $cryptlib"
linklibperl="-L $archlibexp/CORE -L `pwd | sed 's/\/UU$//'` -lperl"
;;
hpux*)
linklibperl="-L `pwd | sed 's/\/UU$//'` -Wl,+s -Wl,+b$archlibexp/CORE -lperl"
;;
os390*)
            shrpldflags='-W l,dll'
linklibperl='libperl.x'
DPERL_EXTERNAL_GLOB=''
;;
esac
case "$ldlibpthname" in
'') ;;
*)
case "$osname" in
os2)
ldlibpth=''
;;
*)
eval "ldlibpth=\"$ldlibpthname=`pwd`:\$$ldlibpthname\""
;;
esac
# Strip off any trailing :'s
ldlibpth=`echo $ldlibpth | sed 's/:*$//'`
;;
        esac
;;
*) pldlflags=''
;;
esac

case "`pwd`" in
# Protect any spaces
*" "*) ldlibpth=`echo $ldlibpth|sed 's/ /\\\\ /g'` ;;
esac

case "$osname" in
os390) test -f /bin/env && ldlibpth="/bin/env $ldlibpth"
;;
esac

: Prepare dependency lists for Makefile.
dynamic_list=' '
for f in $dynamic_ext; do
    : the dependency named here will never exist
      base=`echo "$f" | sed 's/.*\///'`
    dynamic_list="$dynamic_list lib/auto/$f/$base.$dlext"
done

static_list=' '
for f in $static_ext; do
base=`echo "$f" | sed 's/.*\///'`
static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)"
done

nonxs_list=' '
for f in $nonxs_ext; do
    base=`echo "$f" | sed 's/.*\///'`
    nonxs_list="$nonxs_list ext/$f/pm_to_blib"
done

# Handle the usage of different yaccs in posix-bc (During Configure we
# us yacc for perly.y and byacc for a2p.y. The makefiles must use the
# same configuration for run_byacc!):
case "$osname" in
    posix-bc)
byacc=$yacc
;;
esac

echo "Extracting Makefile (with variable substitutions)"
$spitshell >Makefile <<!GROK!THIS!
# Makefile.SH
# This file is derived from Makefile.SH. Any changes made here will
# be lost the next time you run Configure.
# Makefile is used to generate $firstmakefile. The only difference
# is that $firstmakefile has the dependencies filled in at the end.
#
#
# I now supply perly.c with the kits, so don't remake perly.c without byacc
BYACC = $byacc
CC = $cc
LD = $ld

LDFLAGS = $ldflags
CLDFLAGS = $ldflags

mallocsrc = $mallocsrc
mallocobj = $mallocobj
LNS = $lns
# NOTE: some systems don't grok "cp -f". XXX Configure test needed?
CPS = $cp
RMS = rm -f
ranlib = $ranlib

# The following are mentioned only to make metaconfig include the
# appropriate questions in Configure. If you want to change these,
# edit config.sh instead, or specify --man1dir=/wherever on
# installman commandline.
bin = $installbin
scriptdir = $scriptdir
shrpdir = $archlibexp/CORE
privlib = $installprivlib
man1dir = $man1dir
man1ext = $man1ext
man3dir = $man3dir
man3ext = $man3ext

# The following are used to build and install shared libraries for
# dynamic loading.
LDDLFLAGS = $lddlflags
SHRPLDFLAGS = $shrpldflags
CCDLFLAGS = $ccdlflags
DLSUFFIX = .$dlext
PLDLFLAGS = $pldlflags
LIBPERL = $libperl
LLIBPERL= $linklibperl
SHRPENV = $shrpenv

# The following is used to include the current directory in
# the dynamic loader path you are building a shared libperl.
LDLIBPTH = $ldlibpth

dynamic_ext = $dynamic_list
static_ext = $static_list
nonxs_ext = $nonxs_list
ext = \$(dynamic_ext) \$(static_ext) \$(nonxs_ext)
DYNALOADER = lib/auto/DynaLoader/DynaLoader\$(LIB_EXT)

libs = $perllibs $cryptlib

public = perl\$(EXE_EXT) $suidperl utilities translators

shellflags = $shellflags

# This is set to MAKE=$make if your $make command doesn't
# do it for you.
$make_set_make

# Mention $gmake here so it gets probed for by Configure.

# These variables may need to be manually set for non-Unix systems.
AR = $full_ar
EXE_EXT = $_exe
LIB_EXT = $_a
OBJ_EXT = $_o
PATH_SEP = $p_

FIRSTMAKEFILE = $firstmakefile

# Any special object files needed by this architecture, e.g. os2/os2.obj
ARCHOBJS = $archobjs

.SUFFIXES: .c \$(OBJ_EXT) .i .s

# grrr
SHELL = $sh

# how to tr(anslate) newlines
TRNL = '$trnl'

OPTIMIZE = $optimize

EXTRAS = $extras

INSTALLPREFIXEXP = $prefix

!GROK!THIS!
# not used by Makefile but by installperl;
# mentioned here so that metaconfig picks these up
# $installusrbinperl
# $versiononly

case "${osname}:${osvers}" in
darwin:*)
$spitshell >>Makefile <<EOF

# Your locales are broken (osname $osname, osvers $osvers)
# and to avoid the numerous
# perl: warning: Setting locale failed.
# warnings during the build process we reset the locale variables.

LC_ALL=C
LANG=C
LANGUAGE=C
EOF
;;
esac

## In the following dollars and backticks do not need the extra backslash.
$spitshell >>Makefile <<'!NO!SUBS!'

CCCMD = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $(LIBPERL) $@`

CCCMDSRC = `sh $(shellflags) cflags "optimize='$(OPTIMIZE)'" $(LIBPERL) $<`

private = preplibrary lib/Config.pm lib/ExtUtils/Miniperl.pm

# Files to be built with variable substitution before miniperl
# is available.
sh = Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH \
makedir.SH myconfig.SH writemain.SH pod/Makefile.SH

shextract = Makefile cflags config.h makeaperl makedepend \
makedir myconfig writemain pod/Makefile

# Files to be built with variable substitution after miniperl is
# available. Dependencies handled manually below (for now).

pl = pod/pod2html.PL pod/pod2latex.PL pod/pod2man.PL pod/pod2text.PL \
pod/pod2usage.PL pod/podchecker.PL pod/podselect.PL \
pod/buildtoc.PL

# lib/lib.pm is not listed here because it has a rule of its own.
plextract = pod/pod2html pod/pod2latex pod/pod2man pod/pod2text \
pod/pod2usage pod/podchecker pod/podselect \
pod/buildtoc

addedbyconf = UU $(shextract) $(plextract) lib/lib.pm pstruct

h1 = EXTERN.h INTERN.h XSUB.h av.h config.h cop.h cv.h dosish.h
h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h
h3 = opcode.h patchlevel.h perl.h perlapi.h perly.h pp.h proto.h regcomp.h
h4 = regexp.h scope.h sv.h unixish.h util.h iperlsys.h thread.h
h5 = utf8.h warnings.h
h = $(h1) $(h2) $(h3) $(h4) $(h5)

c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c
c2 = perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c utf8.c
c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c xsutils.c
c4 = globals.c perlio.c perlapi.c numeric.c locale.c pp_pack.c pp_sort.c

c = $(c1) $(c2) $(c3) $(c4) miniperlmain.c perlmain.c

obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT)
obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) utf8$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) xsutils$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT) perlapi$(OBJ_EXT) numeric$(OBJ_EXT) locale$(OBJ_EXT) pp_pack$(OBJ_EXT) pp_sort$(OBJ_EXT)

obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)

# Once perl has been Configure'd and built ok you build different
# perl variants (Debugging, Embedded, Multiplicity etc) by saying:
# make clean; make LIBPERL=libperl<type>.a
# where <type> is some combination of 'd' and(or) 'e' or 'm'.
# See cflags to understand how this works.
#
# This mechanism is getting clunky and might not even work any more.
# EMBEDDING is on by default, and MULTIPLICITY doesn't work.
#

lintflags = -hbvxac

.c$(OBJ_EXT):
$(CCCMD) $(PLDLFLAGS) $*.c

.c.i:
$(CCCMDSRC) -E $*.c > $*.i

.c.s:
$(CCCMDSRC) -S $*.c

.PHONY: all compile translators utilities

all: $(FIRSTMAKEFILE) miniperl$(EXE_EXT) extra.pods $(private) $(public) $(dynamic_ext) $(nonxs_ext) extras.make
@echo " ";
@echo " Everything is up to date. Type '$(MAKE) test' to run test suite."

compile: all
echo "testing compilation" > testcompile;
cd utils; $(MAKE) compile;
cd x2p; $(MAKE) compile;
cd pod; $(MAKE) compile;

translators: miniperl$(EXE_EXT) lib/Config.pm FORCE
@echo " "; echo " Making x2p stuff"; cd x2p; $(LDLIBPTH) $(MAKE) all

utilities: miniperl$(EXE_EXT) lib/Config.pm $(plextract) lib/lib.pm FORCE
@echo " "; echo " Making utilities"; cd utils; $(LDLIBPTH) $(MAKE) all


# This is now done by installman only if you actually want the man pages.
# @echo " "; echo " Making docs"; cd pod; $(MAKE) all;

# Phony target to force checking subdirectories.
# Apparently some makes require an action for the FORCE target.
.PHONY: FORCE
FORCE:
@sh -c true
!NO!SUBS!
$spitshell >>Makefile <<!GROK!THIS!

# We do a copy of the op.c instead of a symlink because gcc gets huffy
# if we have a symlink forest to another disk (it complains about too many
# levels of symbolic links, even if we have only two)

opmini\$(OBJ_EXT): op.c config.h
\$(RMS) opmini.c
\$(CPS) op.c opmini.c
\$(CCCMD) \$(PLDLFLAGS) $DPERL_EXTERNAL_GLOB opmini.c
\$(RMS) opmini.c

!GROK!THIS!
$spitshell >>Makefile <<'!NO!SUBS!'
miniperlmain$(OBJ_EXT): miniperlmain.c patchlevel.h
$(CCCMD) $(PLDLFLAGS) $*.c

perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE)
sh writemain $(DYNALOADER) $(static_ext) > writemain.tmp
sh mv-if-diff writemain.tmp perlmain.c

perlmain$(OBJ_EXT): perlmain.c
$(CCCMD) $(PLDLFLAGS) $*.c

# The file ext.libs is a list of libraries that must be linked in
# for static extensions, e.g. -lm -lgdbm, etc. The individual
# static extension Makefile's add to it.
ext.libs: $(static_ext)
-@test -f ext.libs || touch ext.libs

!NO!SUBS!

# How to build libperl. This is still rather convoluted.
# Load up custom Makefile.SH fragment for shared loading and executables:
case "$osname" in
*)
Makefile_s="$osname/Makefile.SHs"
;;
esac

case "$osname" in
aix)
$spitshell >>Makefile <<!GROK!THIS!
LIBS = $perllibs
# In AIX we need to change this for building Perl itself from
# its earlier definition (which is for building external
# extensions *after* Perl has been built and installed)
CCDLFLAGS = `echo $ccdlflags|sed -e 's@-bE:.*/perl\.exp@-bE:perl.exp@'`

!GROK!THIS!
case "$useshrplib" in
define|true|[yY]*)
$spitshell >>Makefile <<'!NO!SUBS!'

LIBPERL_NONSHR = libperl_nonshr$(LIB_EXT)
MINIPERL_NONSHR = miniperl_nonshr$(EXE_EXT)

$(LIBPERL_NONSHR): perl$(OBJ_EXT) $(obj)
$(RMS) $(LIBPERL_NONSHR)
$(AR) rcu $(LIBPERL_NONSHR) perl$(OBJ_EXT) $(obj)

$(MINIPERL_NONSHR): $(LIBPERL_NONSHR) miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT)
$(CC) $(LDFLAGS) -o $(MINIPERL_NONSHR) miniperlmain$(OBJ_EXT) \
opmini$(OBJ_EXT) $(LIBPERL_NONSHR) $(LIBS)

MINIPERLEXP = $(MINIPERL_NONSHR)

LIBPERLEXPORT = perl.exp

!NO!SUBS!

;;
*)
$spitshell >>Makefile <<'!NO!SUBS!'
MINIPERLEXP = miniperl$(EXE_EXT)

PERLEXPORT = perl.exp

!NO!SUBS!
;;
esac
$spitshell >>Makefile <<'!NO!SUBS!'
perl.exp: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH)
./$(MINIPERLEXP) makedef.pl PLATFORM=aix | sort -u | sort -f > perl.exp.tmp
sh mv-if-diff perl.exp.tmp perl.exp

!NO!SUBS!
;;
os2)
$spitshell >>Makefile <<'!NO!SUBS!'
MINIPERLEXP = miniperl

perl5.def: $(MINIPERLEXP) makedef.pl config.sh $(SYM) $(SYMH) miniperl.map
./$(MINIPERLEXP) makedef.pl PLATFORM=os2 -DPERL_DLL=$(PERL_DLL) > perl.exp.tmp
sh mv-if-diff perl.exp.tmp perl5.def

!NO!SUBS!
;;
esac

if test -r $Makefile_s ; then
. $Makefile_s
$spitshell >>Makefile <<!GROK!THIS!

Makefile: $Makefile_s
!GROK!THIS!
else
$spitshell >>Makefile <<'!NO!SUBS!'
$(LIBPERL): $& perl$(OBJ_EXT) $(obj) $(LIBPERLEXPORT)
!NO!SUBS!
case "$useshrplib" in
true)
$spitshell >>Makefile <<'!NO!SUBS!'
$(LD) -o $@ $(SHRPLDFLAGS) perl$(OBJ_EXT) $(obj)
!NO!SUBS!
case "$osname" in
aix)
$spitshell >>Makefile <<'!NO!SUBS!'
rm -f libperl$(OBJ_EXT)
mv $@ libperl$(OBJ_EXT)
$(AR) qv $(LIBPERL) libperl$(OBJ_EXT)
!NO!SUBS!
;;
esac
;;
*)
$spitshell >>Makefile <<'!NO!SUBS!'
rm -f $(LIBPERL)
$(AR) rcu $(LIBPERL) perl$(OBJ_EXT) $(obj)
@$(ranlib) $(LIBPERL)
!NO!SUBS!
;;
esac
$spitshell >>Makefile <<'!NO!SUBS!'

# How to build executables.

# The $& notation tells Sequent machines that it can do a parallel make,
# and is harmless otherwise.
# The miniperl -w -MExporter line is a basic cheap test to catch errors
# before make goes on to run preplibrary and then MakeMaker on extensions.
# This is very handy because later errors are often caused by miniperl
# build problems but that's not obvious to the novice.
# The Module used here must not depend on Config or any extensions.

!NO!SUBS!

case "${osname}${osvers}" in
aix*)
$spitshell >>Makefile <<'!NO!SUBS!'
miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT)
$(CC) -o miniperl $(CLDFLAGS) \
`echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \
miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perl$(OBJ_EXT) $(libs)
$(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
!NO!SUBS!
;;
beos*|next4*)
$spitshell >>Makefile <<'!NO!SUBS!'
miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT)
$(CC) -o miniperl `echo $(obj) | sed 's/ op$(OBJ_EXT) / /'` \
miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) perl$(OBJ_EXT) $(libs)
$(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
!NO!SUBS!
;;
*)
$spitshell >>Makefile <<'!NO!SUBS!'
miniperl$(EXE_EXT): $& miniperlmain$(OBJ_EXT) $(LIBPERL) opmini$(OBJ_EXT)
-@rm -f miniperl.xok
$(LDLIBPTH) $(CC) $(CLDFLAGS) -o miniperl \
miniperlmain$(OBJ_EXT) opmini$(OBJ_EXT) $(LLIBPERL) $(libs)
$(LDLIBPTH) ./miniperl -w -Ilib -MExporter -e '<?>' || $(MAKE) minitest
!NO!SUBS!
;;
esac

$spitshell >>Makefile <<'!NO!SUBS!'

perl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
-@rm -f miniperl.xok
$(SHRPENV) $(LDLIBPTH) $(CC) -o perl$(PERL_SUFFIX) $(PERL_PROFILE_LDFLAGS) $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)

# Purify/Quantify Perls.

pureperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
$(SHRPENV) $(LDLIBPTH) purify $(CC) -o pureperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)

purecovperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
$(SHRPENV) $(LDLIBPTH) purecov $(CC) -o purecovperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)

quantperl$(EXE_EXT): $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
$(SHRPENV) $(LDLIBPTH) quantify $(CC) -o quantperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)

# Third Degree Perl (Tru64 only)

perl.config.dashg:
@echo "Checking optimize='-g' in config.sh..."
@grep "^optimize=" config.sh
@grep "^optimize='-g'" config.sh >/dev/null || exit 1

perl.third.config: config.sh
@echo "To build perl.third you must Configure -Doptimize=-g -Uusemymalloc, checking..."
@$(MAKE) perl.config.dashg
@echo "Checking usemymalloc='n' in config.sh..."
@grep "^usemymalloc=" config.sh
@grep "^usemymalloc='n'" config.sh >/dev/null || exit 1

perl.third: /usr/bin/atom perl.third.config perl
atom -tool third -L. -all -gp -toolargs="-quiet -invalid -uninit heap+stack+partword+copy -min 0" perl
@echo "Now you may run perl.third and then study perl.3log."

# Pixie Perls (Tru64 and IRIX only)

perl.pixie.config: config.sh
@echo "To build perl.pixie you must Configure -Doptimize=-g, checking..."
@$(MAKE) perl.config.dashg

perl.pixie.atom: /usr/bin/atom perl
atom -tool pixie -L. -all -toolargs="-quiet" perl

perl.pixie.irix: perl
pixie perl

perl.pixie: /usr/bin/pixie perl.pixie.config perl
if test -x /usr/bin/atom; then \
$(MAKE) perl.pixie.atom; \
else \
$(MAKE) perl.pixie.irix; \
fi
@echo "Now you may run perl.pixie and then run pixie."

# Gprof Perl

perl.config.dashpg:
@echo "Checking optimize='-pg' in config.sh..."
@grep "^optimize=" config.sh
@grep "^optimize='.*-pg.*'" config.sh >/dev/null || exit 1

perl.gprof.config: config.sh
@echo "To build perl.gprof you must Configure -Doptimize=-pg, checking..."
@$(MAKE) perl.config.dashpg

perl.gprof: /usr/bin/gprof perl.gprof.config
@-rm -f perl
$(MAKE) PERL_SUFFIX=.gprof PERL_PROFILE_LDFLAGS=-pg perl
@echo "Now you may run perl.gprof and then run gprof perl.gprof."

# Gcov Perl

perl.config.gcov:
@echo "To build perl.gcov you must use gcc 3.0 or newer, checking..."
@echo "Checking gccversion in config.sh..."
@grep "^gccversion=" config.sh
@grep "^gccversion='[3-9]\." config.sh >/dev/null || exit 1
@echo "To build perl.gcov you must Configure -Dccflags=-fprofile-arcs -ftest-coverage, checking..."
@echo "Checking ccflags='-fprofile-arcs -ftest-coverage' in config.sh..."
@grep "^ccflags=" config.sh
@grep "^ccflags='.*-fprofile-arcs -ftest-coverage.*'" config.sh >/dev/null || exit 1

perl.gcov: perl.config.gcov
@-rm -f perl
$(MAKE) PERL_SUFFIX=.gcov PERL_PROFILE_LDFLAGS='' perl
@echo "Now you may run perl.gcov and then run gcov some.c."

# Microperl. This is just a convenience thing if one happens to
# build also the full Perl and therefore the real big Makefile:
# usually one should manually explicitly issue the below command.

.PHONY: microperl
microperl:
$(MAKE) -f Makefile.micro

# This version, if specified in Configure, does ONLY those scripts which need
# set-id emulation. Suidperl must be setuid root. It contains the "taint"
# checks as well as the special code to validate that the script in question
# has been invoked correctly.

suidperl$(EXE_EXT): $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs $(PERLEXPORT)
$(SHRPENV) $(LDLIBPTH) $(CC) -o suidperl $(CLDFLAGS) $(CCDLFLAGS) perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)

!NO!SUBS!

fi

$spitshell >>Makefile <<'!NO!SUBS!'

sperl$(OBJ_EXT): perl.c $(h)
$(RMS) sperl.c
$(LNS) perl.c sperl.c
$(CCCMD) -DIAMSUID sperl.c
$(RMS) sperl.c

# We have to call our ./makedir because Ultrix 4.3 make can't handle the line
# test -d lib/auto || mkdir lib/auto
#
.PHONY: preplibrary
preplibrary: miniperl$(EXE_EXT) lib/Config.pm lib/lib.pm $(PREPLIBRARY_LIBPERL)
@sh ./makedir lib/auto
@echo " AutoSplitting perl library"
$(LDLIBPTH) ./miniperl -Ilib -e 'use AutoSplit; \
autosplit_lib_modules(@ARGV)' lib/*.pm lib/*/*.pm
$(MAKE) lib/re.pm

# Take care to avoid modifying lib/Config.pm without reason
# (If trying to create a new port and having problems with the configpm script,
# try 'make minitest' and/or commenting out the tests at the end of configpm.)
lib/Config.pm: config.sh miniperl$(EXE_EXT) configpm
$(LDLIBPTH) ./miniperl configpm configpm.tmp
sh mv-if-diff configpm.tmp $@

lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl$(EXE_EXT) minimod.pl lib/Config.pm
$(LDLIBPTH) ./miniperl minimod.pl > minimod.tmp
sh mv-if-diff minimod.tmp $@
-touch lib/ExtUtils/Miniperl.pm

lib/re.pm: ext/re/re.pm
cp ext/re/re.pm ext/re/re.tmp && sh mv-if-diff ext/re/re.tmp lib/re.pm

$(plextract): miniperl$(EXE_EXT) lib/Config.pm
@-rm -f $@
$(LDLIBPTH) ./miniperl -Ilib $@.PL

lib/lib.pm: miniperl$(EXE_EXT) lib/Config.pm
@-rm -f $@
$(LDLIBPTH) ./miniperl -Ilib lib/lib_pm.PL

extra.pods: miniperl$(EXE_EXT)
-@test -f extra.pods && rm -f `cat extra.pods`
-@rm -f extra.pods
-@for x in `grep -l '^=[a-z]' README.* | grep -v README.vms` ; do \
nx=`echo $$x | sed -e "s/README\.//"`; \
cd pod ; $(LNS) ../$$x "perl"$$nx".pod" ; cd .. ; \
echo "pod/perl"$$nx".pod" >> extra.pods ; \
done
-@rm -f pod/perlvms.pod
-@test -f vms/perlvms.pod && cd pod && $(LNS) ../vms/perlvms.pod perlvms.pod && cd .. && echo "pod/perlvms.pod" >> extra.pods

extras.make: perl$(EXE_EXT)
-@test -s extras.lst && $(LDLIBPTH) PATH=`pwd`:${PATH} PERL5LIB=`pwd`/lib ./perl -Ilib -MCPAN -e '@ARGV&&make(@ARGV)' `cat extras.lst`

extras.test: perl$(EXE_EXT)
-@test -s extras.lst && $(LDLIBPTH) PATH=`pwd`:${PATH} PERL5LIB=`pwd`/lib ./perl -Ilib -MCPAN -e '@ARGV&&test(@ARGV)' `cat extras.lst`

extras.install: perl$(EXE_EXT)
-@test -s extras.lst && $(LDLIBPTH) PATH=`pwd`:${PATH} PERL5LIB=`pwd`/lib ./perl -Ilib -MCPAN -e '@ARGV&&install(@ARGV)' `cat extras.lst`

.PHONY: install install-strip install-all install-verbose install-silent \
no-install install.perl install.man installman install.html installhtml

install-strip:
$(MAKE) STRIPFLAGS=-s install

install install-all:
$(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS)

install-verbose:
$(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-V

install-silent:
$(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-S

no-install:
$(MAKE) install.perl install.man STRIPFLAGS=$(STRIPFLAGS) INSTALLFLAGS=-n

install.perl: all installperl
if [ -n "$(COMPILE)" ]; \
then \
cd utils; $(MAKE) compile; \
cd ../x2p; $(MAKE) compile; \
cd ../pod; $(MAKE) compile; \
else :; \
fi
$(LDLIBPTH) ./perl installperl $(INSTALLFLAGS) $(STRIPFLAGS)
$(MAKE) extras.install

install.man: all installman
$(LDLIBPTH) ./perl installman $(INSTALLFLAGS)

# XXX Experimental. Hardwired values, but useful for testing.
# Eventually Configure could ask for some of these values.
install.html: all installhtml
-@test -f README.vms && cd vms && $(LNS) ../README.vms README_vms.pod && cd ..
$(LDLIBPTH) ./perl installhtml \
      --podroot=. --podpath=. --recurse \
      --htmldir=$(privlib)/html \
      --htmlroot=$(privlib)/html \
      --splithead=pod/perlipc \
      --splititem=pod/perlfunc \
      --libpods=perlfunc:perlguts:perlvar:perlrun:perlop \
      --verbose


# I now supply perly.c with the kits, so the following section is
# used only if you force byacc to run by saying
# make run_byacc
# Since we patch up the byacc output, the perly.fixer script needs
# to run with precisely the same version of byacc as I use. You
# normally shouldn't remake perly.[ch].

.PHONY: check_byacc run_byacc

check_byacc:
@$(BYACC) -V 2>&1 | grep 'version 1\.8\.2'

run_byacc: FORCE check_byacc
$(BYACC) -d perly.y
-chmod 664 perly.c perly.h
sh $(shellflags) ./perly.fixer y.tab.c perly.c
sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
-e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c
sed -e '/^extern YYSTYPE yy/D' y.tab.h >yh.tmp && mv yh.tmp y.tab.h
cmp -s y.tab.h perly.h && rm -f y.tab.h || mv y.tab.h perly.h
perl -i.old perlyline.pl perly.c
chmod 664 vms/perly_c.vms vms/perly_h.vms
perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms

# We don't want to regenerate perly.c and perly.h, but they might
# appear out-of-date after a patch is applied or a new distribution is
# made.
perly.c: perly.y
-@sh -c true

perly.h: perly.y
-@sh -c true

PERLYVMS = vms/perly_c.vms vms/perly_h.vms

$(PERLYVMS): perly.c perly.h vms/vms_yfix.pl
perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms

# No compat3.sym here since and including the 5.004_50.
# No interp.sym since 5.005_03.
SYM = global.sym globvar.sym perlio.sym pp.sym

SYMH = perlvars.h intrpvar.h thrdvar.h

CHMOD_W = chmod +w

# The following files are generated automatically
# keywords.pl: keywords.h
# opcode.pl: opcode.h opnames.h pp_proto.h pp.sym
# [* embed.pl needs pp.sym generated by opcode.pl! *]
# embed.pl: proto.h embed.h embedvar.h global.sym
# perlapi.h perlapi.c pod/perlintern.pod
# pod/perlapi.pod
# bytecode.pl: ext/ByteLoader/byterun.h ext/ByteLoader/byterun.c
# ext/B/B/Asmdata.pm
# regcomp.pl: regnodes.h
# warnings.pl: warnings.h lib/warnings.pm
# The correct versions should be already supplied with the perl kit,
# in case you don't have perl available.
# To force them to be regenerated, type
# make regen_headers

AUTOGEN_FILES = keywords.h opcode.h opnames.h pp_proto.h pp.sym proto.h \
embed.h embedvar.h global.sym \
pod/perlintern.pod pod/perlapi.pod \
perlapi.h perlapi.c ext/ByteLoader/byterun.h \
ext/ByteLoader/byterun.c ext/B/B/Asmdata.pm regnodes.h \
warnings.h lib/warnings.pm

.PHONY: regen_headers regen_pods regen_all

regen_headers: FORCE
-$(CHMOD_W) $(AUTOGEN_FILES)
-perl keywords.pl
-perl opcode.pl
-perl embed.pl
-perl bytecode.pl
-perl regcomp.pl
-perl warnings.pl
-perl autodoc.pl

regen_pods: FORCE
-cd pod; $(LDLIBPTH) $(MAKE) regen_pods

regen_all: $(PERLYVMS) regen_headers regen_pods

# Extensions:
# Names added to $(dynamic_ext) or $(static_ext) or $(nonxs_ext) will
# automatically get built. There should ordinarily be no need to change
# any of this part of makefile.
#
# The dummy dependency is a place holder in case $(dynamic_ext) or
# $(static_ext) is empty.
#
# DynaLoader may be needed for extensions that use Makefile.PL.

$(DYNALOADER): miniperl$(EXE_EXT) preplibrary FORCE
@$(LDLIBPTH) sh ext/util/make_ext static $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)

d_dummy $(dynamic_ext): miniperl$(EXE_EXT) preplibrary $(DYNALOADER) FORCE
@$(LDLIBPTH) sh ext/util/make_ext dynamic $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)

s_dummy $(static_ext): miniperl$(EXE_EXT) preplibrary $(DYNALOADER) FORCE
@$(LDLIBPTH) sh ext/util/make_ext static $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)

n_dummy $(nonxs_ext): miniperl$(EXE_EXT) preplibrary $(DYNALOADER) FORCE
@$(LDLIBPTH) sh ext/util/make_ext nonxs $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)

.PHONY: clean _tidy _mopup _cleaner1 _cleaner2 \
realclean _realcleaner clobber _clobber \
distclean veryclean _verycleaner

clean: _tidy _mopup

realclean: _realcleaner _mopup
@echo "Note that '$(MAKE) realclean' does not delete config.sh or Policy.sh"

_clobber:
-@rm -f Cross/run-* Cross/to-* Cross/from-*
rm -f config.sh cppstdin Policy.sh extras.lst

clobber: _realcleaner _mopup _clobber

distclean: clobber

# Like distclean but also removes emacs backups and *.orig.
veryclean: _verycleaner _mopup _clobber
-@rm -f Obsolete Wanted

# Do not 'make _mopup' directly.
_mopup:
rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c
-@test -f extra.pods && rm -f `cat extra.pods`
-@test -f vms/README_vms.pod && rm -f vms/README_vms.pod
-rm -f perl.exp ext.libs extra.pods opmini.o
-rm -f perl.export perl.dll perl.libexp perl.map perl.def
-rm -f perl.loadmap miniperl.loadmap perl.prelmap miniperl.prelmap
-rm -f perl.third lib*.so.perl.third perl.3log t/perl.third t/perl.3log
-rm -f perl.pixie lib*.so.perl.pixie lib*.so.Addrs
-rm -f perl.Addrs perl.Counts t/perl.Addrs t/perl.Counts *perl.xok
-rm -f perlld cygwin.c ld2 libperl*.def libperl*.dll cygperl*.dll *.exe.stackdump
rm -f perl$(EXE_EXT) suidperl$(EXE_EXT) miniperl$(EXE_EXT) $(LIBPERL) libperl.* microperl

# Do not 'make _tidy' directly.
_tidy:
-cd pod; $(LDLIBPTH) $(MAKE) clean
-cd utils; $(LDLIBPTH) $(MAKE) clean
-cd x2p; $(LDLIBPTH) $(MAKE) clean
-@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \
$(LDLIBPTH) sh ext/util/make_ext clean $$x MAKE=$(MAKE) ; \
done
rm -f testcompile compilelog

_cleaner1:
-cd os2; rm -f Makefile
-cd pod; $(LDLIBPTH) $(MAKE) $(CLEAN)
-cd utils; $(LDLIBPTH) $(MAKE) $(CLEAN)
-cd x2p; $(LDLIBPTH) $(MAKE) $(CLEAN)
-@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) $(nonxs_ext) ; do \
$(LDLIBPTH) sh ext/util/make_ext $(CLEAN) $$x MAKE=$(MAKE) ; \
done

# Some systems do not support "?", so keep these files separate.
_cleaner2:
-rm -f core.*perl.*.? t/core.perl.*.? .?*.c
rm -f core *perl.core t/core t/*perl.core
rm -f t/misctmp* t/forktmp* t/tmp* t/c t/perl$(EXE_EXT) t/rantests
rm -f so_locations $(LIBPERL_NONSHR) $(MINIPERL_NONSHR)
rm -rf $(addedbyconf)
rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old
rm -f $(private)
rm -rf lib/auto
rm -f lib/.exists lib/*/.exists lib/*/*/.exists
rm -f h2ph.man pstruct
rm -rf .config
rm -f testcompile compilelog
-rmdir lib/B lib/Data lib/Digest
rm -rf lib/Encode
-rmdir lib/IO/Socket lib/IO/t lib/IO
-rmdir lib/Filter/Util lib/List lib/MIME lib/PerlIO lib/Scalar lib/Sys
-rmdir lib/Thread lib/XS

_realcleaner:
@$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=realclean
@$(LDLIBPTH) $(MAKE) _cleaner2

_verycleaner:
@$(LDLIBPTH) $(MAKE) _cleaner1 CLEAN=veryclean
@$(LDLIBPTH) $(MAKE) _cleaner2
-rm -f *~ *.orig */*~ */*.orig */*/*~ */*/*.orig

# The following lint has practically everything turned on. Unfortunately,
# you have to wade through a lot of mumbo jumbo that can't be suppressed.
# If the source file has a /*NOSTRICT*/ somewhere, ignore the lint message
# for that spot.

.PHONY: lint
lint: $(c)
lint $(lintflags) $(defs) perly.c $(c) > perl.fuzz

# Need to unset during recursion to go out of loop.
# The README below ensures that the dependency list is never empty and
# that when MAKEDEPEND is empty $(FIRSTMAKEFILE) doesn't need rebuilding.

MAKEDEPEND = Makefile makedepend

$(FIRSTMAKEFILE): README $(MAKEDEPEND)
$(MAKE) depend MAKEDEPEND=

config.h: config_h.SH config.sh
$(SHELL) config_h.SH

# When done, touch perlmain.c so that it doesn't get remade each time.
.PHONY: depend
depend: makedepend
sh ./makedepend MAKE=$(MAKE)
- test -s perlmain.c && touch perlmain.c
cd x2p; $(MAKE) depend

# Cannot postpone this until $firstmakefile is ready ;-)
makedepend: makedepend.SH config.sh
sh ./makedepend.SH

.PHONY: test check test_prep test_prep_nodll test_prep_pre _test_prep \
test_tty test-tty _test_tty test_notty test-notty _test_notty \
utest ucheck test.utf8 check.utf8 \
test.third check.third utest.third ucheck.third test_notty.third \
test.deparse test_notty.deparse \
minitest coretest

# Cannot delegate rebuilding of t/perl to make
# to allow interlaced test and minitest

TESTFILE=TEST

_test_prep:
cd t && (rm -f $(PERL)$(EXE_EXT); $(LNS) ../$(PERL)$(EXE_EXT) $(PERL)$(EXE_EXT))

# Architecture-neutral stuff:

test_prep_pre: preplibrary utilities $(nonxs_ext)

test_prep: test_prep_pre miniperl$(EXE_EXT) perl$(EXE_EXT) $(dynamic_ext) $(TEST_PERL_DLL)
PERL=./perl $(MAKE) _test_prep

_test_tty:
cd t && $(LDLIBPTH) $(PERL_DEBUG) $(PERL) $(TESTFILE) $(TEST_ARGS) </dev/tty

_test_notty:
cd t && $(LDLIBPTH) $(PERL_DEBUG) PERL_SKIP_TTY_TEST=1 $(PERL) $(TESTFILE) $(TEST_ARGS)

# The second branch is for testing without a tty or controlling terminal,
# see t/op/stat.t
_test:
if (true </dev/tty) >/dev/null 2>&1; then \
$(MAKE) TEST_ARGS=$(TEST_ARGS) TESTFILE=$(TESTFILE) _test_tty ; \
else \
$(MAKE) TEST_ARGS=$(TEST_ARGS) TESTFILE=$(TESTFILE) _test_notty ; \
fi
@echo "Ran tests" > t/rantests

test check: test_prep
PERL=./perl $(MAKE) _test

test_tty: test_prep
PERL=./perl $(MAKE) _test_tty

test_notty: test_prep
PERL=./perl $(MAKE) _test_notty

utest ucheck test.utf8 check.utf8: test_prep
PERL=./perl TEST_ARGS=-utf8 $(MAKE) _test

coretest: test_prep
PERL=./perl TEST_ARGS=-core $(MAKE) _test

test-prep: test_prep

test-tty: test_tty

test-notty: test_notty

# Targets for Third Degree testing.

test_prep.third: test_prep perl.third
PERL=./perl.third $(MAKE) _test_prep

test.third check.third: test_prep.third perl.third
PERL=./perl.third PERL_DEBUG=PERL_3LOG=1 $(MAKE) _test

utest.third ucheck.third: test_prep.third perl.third
PERL=./perl.third PERL_DEBUG=PERL_3LOG=1 TEST_ARGS=-utf8 $(MAKE) _test

test_notty.third: test_prep.third perl.third
PERL=./perl.third $(MAKE) PERL_DEBUG=PERL_3LOG=1 _test_notty

# Targets for Deparse testing.

test.deparse: test_prep
PERL=./perl TEST_ARGS=-deparse $(MAKE) _test

test_notty.deparse: test_prep
PERL=./perl TEST_ARGS=-deparse $(MAKE) _test_notty

# Can't depend on lib/Config.pm because that might be where miniperl
# is crashing.
minitest: miniperl$(EXE_EXT) lib/re.pm
-@test -f lib/lib.pm && test -f lib/Config.pm || \
$(MAKE) lib/Config.pm lib/lib.pm
@echo " "
@echo "You may see some irrelevant test failures if you have been unable"
@echo "to build lib/Config.pm or lib/lib.pm."
@echo " "
- cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
&& $(LDLIBPTH) ./perl TEST base/*.t comp/*.t cmd/*.t run/*.t io/*.t op/*.t uni/*.t </dev/tty

# Test via harness

test_harness: test_prep
PERL=./perl $(MAKE) TESTFILE=harness _test

# Handy way to run perlbug -ok without having to install and run the
# installed perlbug. We don't re-run the tests here - we trust the user.
# Please *don't* use this unless all tests pass.
# If you want to report test failures, use "make nok" instead.

.PHONY: ok okfile oknack okfilenack nok nokfile noknack nokfilenack

ok: utilities
$(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)'

okfile: utilities
$(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok

oknack: utilities
$(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -A

okfilenack: utilities
$(LDLIBPTH) ./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)' -F perl.ok -A

nok: utilities
$(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)'

nokfile: utilities
$(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok

noknack: utilities
$(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -A

nokfilenack: utilities
$(LDLIBPTH) ./perl -Ilib utils/perlbug -nok -s '(UNINSTALLED)' -F perl.nok -A

.PHONY: clist hlist shlist pllist

clist: $(c)
echo $(c) | tr ' ' $(TRNL) >.clist

hlist: $(h)
echo $(h) | tr ' ' $(TRNL) >.hlist

shlist: $(sh)
echo $(sh) | tr ' ' $(TRNL) >.shlist

pllist: $(pl)
echo $(pl) | tr ' ' $(TRNL) >.pllist

Makefile: Makefile.SH ./config.sh
$(SHELL) Makefile.SH

.PHONY: distcheck
distcheck: FORCE
perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()'

.PHONY: elc
elc: emacs/cperl-mode.elc

emacs/cperl-mode.elc: emacs/cperl-mode.el
-cd emacs; emacs -batch -q -no-site-file -f batch-byte-compile cperl-mode.el

.PHONY: etags ctags tags

etags: TAGS

TAGS: emacs/cperl-mode.elc
sh emacs/ptags

ctags: tags

# Let's hope make will not go into an infinite loop on case-unsensitive systems
# This may also fail if . is in the head of the path, since perl will
# require -Ilib
tags: TAGS
perl emacs/e2ctags.pl TAGS > tags

# AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
# If this runs make out of memory, delete /usr/include lines.
!NO!SUBS!

$eunicefix Makefile
case `pwd` in
*SH)
    $rm -f ../Makefile
    $ln Makefile ../Makefile
    ;;
esac
$rm -f $firstmakefile

# Now do any special processing required before building.

case "$ebcdic" in
$define)
    xxx=''
    echo "This is an EBCDIC system, checking if any parser files need regenerating." >&4
case "$osname" in
os390|posix-bc)
    rm -f y.tab.c y.tab.h
    # yacc must be a reentrant ("pure") Bison in BS2000 Posix!
    yacc -d perly.y >/dev/null 2>&1
    if cmp -s y.tab.c perly.c; then
        rm -f y.tab.c
    else
        echo "perly.y -> perly.c" >&2
        mv -f y.tab.c perly.c
        chmod u+w perly.c
        sed -e '/^#include "perl\.h"/a\
\
#define yydebug PL_yydebug\
#define yynerrs PL_yynerrs\
#define yyerrflag PL_yyerrflag\
#define yychar PL_yychar\
#define yyval PL_yyval\
#define yylval PL_yylval' \
            -e '/YYSTYPE *yyval;/D' \
            -e '/YYSTYPE *yylval;/D' \
            -e '/int yychar,/,/yynerrs;/D' \
            -e 's/int yydebug = 0;/yydebug = 0;/' \
            -e 's/[^_]realloc(/PerlMem_realloc(/g' \
            -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
            -e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c
        xxx="$xxx perly.c"
    fi
    if cmp -s y.tab.h perly.h; then
        rm -f y.tab.h
    else
        echo "perly.y -> perly.h" >&2
        mv -f y.tab.h perly.h
        xxx="$xxx perly.h"
    fi
    if cd x2p
    then
        rm -f y.tab.c y.tab.h
        case "$osname" in
        posix-bc)
           # we are using two different yaccs in BS2000 Posix!
           byacc a2p.y >/dev/null 2>&1
           ;;
        *) # e.g. os390
           yacc a2p.y >/dev/null 2>&1
           ;;
        esac
        if cmp -s y.tab.c a2p.c
        then
            rm -f y.tab.c
        else
            echo "a2p.y -> a2p.c" >&2
            mv -f y.tab.c a2p.c
            chmod u+w a2p.c
            sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
-e 's|^static void __YY_YACC_MAIN.*BS2000.*|/*static main deleted*/|' \
                -e 's/y\.tab/a2p/g' a2p.c >a2p.tmp && mv a2p.tmp a2p.c
            xxx="$xxx a2p.c"
        fi
        # In case somebody yacc -d:ed the a2p.y.
        if test -f y.tab.h
        then
            if cmp -s y.tab.h a2p.h
            then
                rm -f y.tab.h
            else
                echo "a2p.h -> a2p.h" >&2
                mv -f y.tab.h a2p.h
                xxx="$xxx a2p.h"
            fi
        fi
        cd ..
    fi
    ;;
vmesa)
    # Do nothing in VM/ESA.
    ;;
*)
    echo "'$osname' is an EBCDIC system I don't know that well." >&4
    ;;
esac
    case "$xxx" in
    '') echo "No parser files were regenerated. That's okay." >&2 ;;
    esac
    ;;
esac

Something went wrong with that request. Please try again.