Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
tag: the_answer
Fetching contributors…

Cannot retrieve contributors at this time

547 lines (438 sloc) 16.486 kb
#! /bin/sh
case $CONFIG in
'')
if test -f config.sh; then TOP=.;
elif test -f ../config.sh; then TOP=..;
elif test -f ../../config.sh; then TOP=../..;
elif test -f ../../../config.sh; then TOP=../../..;
elif test -f ../../../../config.sh; then TOP=../../../..;
else
echo "Can't find config.sh."; exit 1
fi
. $TOP/config.sh
;;
esac
: This forces SH files to create target in same directory as SH file.
: This is so that make depend always knows where to find SH derivatives.
case "$0" in
*/*) cd `expr X$0 : 'X\(.*\)/'` ;;
esac
case "$d_dosuid" in
*define*) suidperl='suidperl' ;;
*) suidperl='';;
esac
linklibperl='$(LIBPERL)'
shrpldflags='$(LDDLFLAGS)'
case "$useshrplib" in
true)
pldlflags="$cccdlflags"
# NeXT-4 specific stuff. Can't we do this in the hint file?
case "${osname}${osvers}" in
next4*)
ld=libtool
lddlflags="-dynamic -undefined warning -framework System \
-compatibility_version 1 -current_version $patchlevel \
-prebind -seg1addr 0x27000000 -install_name \$(shrpdir)/\$@"
;;
sunos*|freebsd[23]*|netbsd*)
linklibperl="-lperl"
;;
aix*)
shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp"
case "$osvers" in
3*)
shrpldflags="$shrpldflags -e _nostart $ldflags $libs $cryptlib"
;;
*)
shrpldflags="$shrpldflags -b noentry $ldflags $libs $cryptlib"
;;
esac
aixinstdir=`pwd | sed 's/\/UU$//'`
linklibperl="-L $archlibexp/CORE -L $aixinstdir -lperl"
;;
esac
;;
*) pldlflags=''
;;
esac
: Prepare dependency lists for Makefile.
dynamic_list=' '
for f in $dynamic_ext; do
: the dependency named here will never exist
base=`echo "$f" | sed 's/.*\///'`
dynamic_list="$dynamic_list lib/auto/$f/$base.$dlext"
done
static_list=' '
for f in $static_ext; do
base=`echo "$f" | sed 's/.*\///'`
static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)"
done
echo "Extracting Makefile (with variable substitutions)"
$spitshell >Makefile <<!GROK!THIS!
# Makefile.SH
# This file is derived from Makefile.SH. Any changes made here will
# be lost the next time you run Configure.
# Makefile is used to generate $firstmakefile. The only difference
# is that $firstmakefile has the dependencies filled in at the end.
#
#
# I now supply perly.c with the kits, so don't remake perly.c without byacc
BYACC = $byacc
CC = $cc
LD = $ld
LDFLAGS = $ldflags
CLDFLAGS = $ldflags
SMALL = $small
LARGE = $large $split
mallocsrc = $mallocsrc
mallocobj = $mallocobj
LNS = $lns
RMS = rm -f
ranlib = $ranlib
# The following are mentioned only to make metaconfig include the
# appropriate questions in Configure. If you want to change these,
# edit config.sh instead, or specify --man1dir=/wherever on
# installman commandline.
bin = $installbin
scriptdir = $scriptdir
shrpdir = $archlibexp/CORE
privlib = $installprivlib
man1dir = $man1dir
man1ext = $man1ext
man3dir = $man3dir
man3ext = $man3ext
# The following are used to build and install shared libraries for
# dynamic loading.
LDDLFLAGS = $lddlflags
SHRPLDFLAGS = $shrpldflags
CCDLFLAGS = $ccdlflags
DLSUFFIX = .$dlext
PLDLFLAGS = $pldlflags
LIBPERL = $libperl
LLIBPERL= $linklibperl
SHRPENV = $shrpenv
dynamic_ext = $dynamic_list
static_ext = $static_list
ext = \$(dynamic_ext) \$(static_ext)
DYNALOADER = lib/auto/DynaLoader/DynaLoader\$(LIB_EXT)
libs = $libs $cryptlib
public = perl $suidperl utilities translators
shellflags = $shellflags
# This is set to MAKE=$make if your $make command doesn't
# do it for you.
$make_set_make
# These variables will be used in a future version to make
# the make file more portable to non-unix systems.
AR = $ar
EXE_EXT = $exe_ext
LIB_EXT = $lib_ext
OBJ_EXT = $obj_ext
PATH_SEP = $path_sep
FIRSTMAKEFILE = $firstmakefile
# Any special object files needed by this architecture, e.g. os2/os2.obj
ARCHOBJS = $archobjs
.SUFFIXES: .c \$(OBJ_EXT)
# grrr
SHELL = $sh
!GROK!THIS!
## In the following dollars and backticks do not need the extra backslash.
$spitshell >>Makefile <<'!NO!SUBS!'
CCCMD = `sh $(shellflags) cflags $(LIBPERL) $@`
private = preplibrary lib/ExtUtils/Miniperl.pm lib/Config.pm
# Files to be built with variable substitution before miniperl
# is available.
sh = Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH \
makedir.SH perl_exp.SH writemain.SH
shextract = Makefile cflags config.h makeaperl makedepend \
makedir perl.exp writemain
# Files to be built with variable substitution after miniperl is
# available. Dependencies handled manually below (for now).
pl = pod/pod2html.PL pod/pod2latex.PL pod/pod2man.PL pod/pod2text.PL
plextract = pod/pod2html pod/pod2latex pod/pod2man pod/pod2text
addedbyconf = UU $(shextract) $(plextract) pstruct
h1 = EXTERN.h INTERN.h XSUB.h av.h config.h cop.h cv.h dosish.h
h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h
h3 = opcode.h patchlevel.h perl.h perly.h pp.h proto.h regcomp.h
h4 = regexp.h scope.h sv.h unixish.h util.h perlio.h
h = $(h1) $(h2) $(h3) $(h4)
c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c
c2 = perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c
c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c globals.c perlio.c
c = $(c1) $(c2) $(c3) miniperlmain.c perlmain.c
obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT)
obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT)
obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)
# Once perl has been Configure'd and built ok you build different
# perl variants (Debugging, Embedded, Multiplicity etc) by saying:
# make clean; make LIBPERL=libperl<type>.a
# where <type> is some combination of 'd' and(or) 'e' or 'm'.
# See cflags to understand how this works.
#
# This mechanism is getting clunky and might not even work any more.
# EMBEDDING is on by default, and MULTIPLICITY doesn't work.
#
lintflags = -hbvxac
.c$(OBJ_EXT):
$(CCCMD) $(PLDLFLAGS) $*.c
all: $(FIRSTMAKEFILE) miniperl $(private) $(plextract) $(public) $(dynamic_ext)
@echo " "; echo " Everything is up to date."
translators: miniperl lib/Config.pm FORCE
@echo " "; echo " Making x2p stuff"; cd x2p; $(MAKE) all
utilities: miniperl lib/Config.pm FORCE
@echo " "; echo " Making utilities"; cd utils; $(MAKE) all
# This is now done by installman only if you actually want the man pages.
# @echo " "; echo " Making docs"; cd pod; $(MAKE) all;
# Phony target to force checking subdirectories.
# Apparently some makes require an action for the FORCE target.
FORCE:
@sh -c true
miniperlmain$(OBJ_EXT): miniperlmain.c
$(CCCMD) $(PLDLFLAGS) $*.c
perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE)
sh writemain $(DYNALOADER) $(static_ext) > tmp
sh mv-if-diff tmp perlmain.c
perlmain$(OBJ_EXT): perlmain.c
$(CCCMD) $(PLDLFLAGS) $*.c
# The file ext.libs is a list of libraries that must be linked in
# for static extensions, e.g. -lm -lgdbm, etc. The individual
# static extension Makefile's add to it.
ext.libs: $(static_ext)
-@test -f ext.libs || touch ext.libs
!NO!SUBS!
# How to build libperl. This is still rather convoluted.
# Load up custom Makefile.SH fragment for shared loading and executables:
if test -r $osname/Makefile.SHs ; then
. $osname/Makefile.SHs
$spitshell >>Makefile <<!GROK!THIS!
Makefile: $osname/Makefile.SHs
!GROK!THIS!
else
$spitshell >>Makefile <<'!NO!SUBS!'
$(LIBPERL): $& perl$(OBJ_EXT) $(obj)
!NO!SUBS!
case "$useshrplib" in
true)
$spitshell >>Makefile <<'!NO!SUBS!'
$(LD) $(SHRPLDFLAGS) -o $@ perl$(OBJ_EXT) $(obj)
!NO!SUBS!
case "$osname" in
aix)
$spitshell >>Makefile <<'!NO!SUBS!'
mv $@ libperl$(OBJ_EXT)
$(AR) qv $(LIBPERL) libperl$(OBJ_EXT)
!NO!SUBS!
;;
esac
;;
*)
$spitshell >>Makefile <<'!NO!SUBS!'
rm -f $(LIBPERL)
$(AR) rcu $(LIBPERL) perl$(OBJ_EXT) $(obj)
@$(ranlib) $(LIBPERL)
!NO!SUBS!
;;
esac
$spitshell >>Makefile <<'!NO!SUBS!'
# How to build executables.
# The $& notation tells Sequent machines that it can do a parallel make,
# and is harmless otherwise.
# The miniperl -w -MExporter line is a basic cheap test to catch errors
# before make goes on to run preplibrary and then MakeMaker on extensions.
# This is very handy because later errors are often caused by miniperl
# build problems but that's not obvious to the novice.
# The Module used here must not depend on Config or any extensions.
miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL)
$(CC) $(LARGE) $(CLDFLAGS) -o miniperl miniperlmain$(OBJ_EXT) $(LLIBPERL) $(libs)
@./miniperl -w -Ilib -MExporter -e 0 || $(MAKE) minitest
perl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
$(SHRPENV) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o perl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
pureperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
purify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o pureperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
purecovperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
purecov $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o purecovperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
quantperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
quantify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o quantperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
# This version, if specified in Configure, does ONLY those scripts which need
# set-id emulation. Suidperl must be setuid root. It contains the "taint"
# checks as well as the special code to validate that the script in question
# has been invoked correctly.
suidperl: $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
$(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o suidperl perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)
!NO!SUBS!
fi
$spitshell >>Makefile <<'!NO!SUBS!'
sperl$(OBJ_EXT): perl.c perly.h patchlevel.h $(h)
$(RMS) sperl.c
$(LNS) perl.c sperl.c
$(CCCMD) -DIAMSUID sperl.c
$(RMS) sperl.c
# We have to call our ./makedir because Ultrix 4.3 make can't handle the line
# test -d lib/auto || mkdir lib/auto
#
preplibrary: miniperl lib/Config.pm $(plextract)
@sh ./makedir lib/auto
@echo " AutoSplitting perl library"
@./miniperl -Ilib -e 'use AutoSplit; \
autosplit_lib_modules(@ARGV)' lib/*.pm lib/*/*.pm
# Take care to avoid modifying lib/Config.pm without reason
lib/Config.pm: config.sh miniperl configpm
./miniperl configpm tmp
sh mv-if-diff tmp lib/Config.pm
lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl minimod.pl lib/Config.pm
./miniperl minimod.pl > tmp && mv tmp $@
$(plextract): miniperl lib/Config.pm
./miniperl -Ilib $@.PL
install: all install.perl install.man
install.perl: all installperl
./perl installperl
install.man: all installman
./perl installman
# Not implemented yet.
#install.html: all installhtml
# ./perl installhtml
# I now supply perly.c with the kits, so the following section is
# used only if you force byacc to run by saying
# make run_byacc
# Since we patch up the byacc output, the perly.fixer script needs
# to run with precisely the same version of byacc as I use. You
# normally shouldn't remake perly.[ch].
run_byacc: FORCE
@ echo 'Expect' 113 shift/reduce and 1 reduce/reduce conflict
$(BYACC) -d perly.y
sh $(shellflags) ./perly.fixer y.tab.c perly.c
sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
-e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c
echo 'extern YYSTYPE yylval;' >>y.tab.h
cmp -s y.tab.h perly.h && rm -f y.tab.h || mv y.tab.h perly.h
- perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms
# We don't want to regenerate perly.c and perly.h, but they might
# appear out-of-date after a patch is applied or a new distribution is
# made.
perly.c: perly.y
-@sh -c true
perly.h: perly.y
-@sh -c true
# The following three header files are generated automatically
# keywords.h: keywords.pl
# opcode.h: opcode.pl
# embed.h: embed.pl global.sym interp.sym
# The correct versions should be already supplied with the perl kit,
# in case you don't have perl available.
# To force them to run, type
# make regen_headers
regen_headers: FORCE
perl keywords.pl
perl opcode.pl
perl embed.pl
# Extensions:
# Names added to $(dynamic_ext) or $(static_ext) will automatically
# get built. There should ordinarily be no need to change any of
# this part of makefile.
#
# The dummy dependency is a place holder in case $(dynamic_ext) or
# $(static_ext) is empty.
#
# DynaLoader may be needed for extensions that use Makefile.PL.
$(DYNALOADER): miniperl preplibrary FORCE
@sh ext/util/make_ext static $@ LIBPERL_A=$(LIBPERL)
d_dummy $(dynamic_ext): miniperl preplibrary $(DYNALOADER) FORCE
@sh ext/util/make_ext dynamic $@ LIBPERL_A=$(LIBPERL)
s_dummy $(static_ext): miniperl preplibrary $(DYNALOADER) FORCE
@sh ext/util/make_ext static $@ LIBPERL_A=$(LIBPERL)
clean: _tidy _mopup
realclean: _cleaner _mopup
@echo "Note that make realclean does not delete config.sh"
clobber: _cleaner _mopup
rm -f config.sh cppstdin
distclean: clobber
# Do not 'make _mopup' directly.
_mopup:
rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c
rm -f perl.exp ext.libs
-rm -f perl.export perl.dll perl.libexp perl.map perl.def
rm -f perl suidperl miniperl $(LIBPERL)
# Do not 'make _tidy' directly.
_tidy:
-cd pod; $(MAKE) clean
-cd utils; $(MAKE) clean
-cd x2p; $(MAKE) clean
-@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \
sh ext/util/make_ext clean $$x ; \
done
# Do not 'make _cleaner' directly.
_cleaner:
-cd os2; rm -f Makefile
-cd pod; $(MAKE) realclean
-cd utils; $(MAKE) realclean
-cd x2p; $(MAKE) realclean
-@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \
sh ext/util/make_ext realclean $$x ; \
done
rm -f *.orig */*.orig *~ */*~ core t/core t/c t/perl
rm -rf $(addedbyconf)
rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old
rm -f $(private)
rm -rf lib/auto
rm -f lib/.exists
rm -f h2ph.man pstruct
rm -rf .config
# The following lint has practically everything turned on. Unfortunately,
# you have to wade through a lot of mumbo jumbo that can't be suppressed.
# If the source file has a /*NOSTRICT*/ somewhere, ignore the lint message
# for that spot.
lint: perly.c $(c)
lint $(lintflags) $(defs) perly.c $(c) > perl.fuzz
# Need to unset during recursion to go out of loop
MAKEDEPEND = makedepend
$(FIRSTMAKEFILE): Makefile $(MAKEDEPEND)
$(MAKE) depend MAKEDEPEND=
config.h: config_h.SH config.sh
$(SHELL) config_h.SH
perl.exp: perl_exp.SH config.sh
$(SHELL) perl_exp.SH
# When done, touch perlmain.c so that it doesn't get remade each time.
depend: makedepend
sh ./makedepend
- test -s perlmain.c && touch perlmain.c
cd x2p; $(MAKE) depend
# Cannot postpone this until $firstmakefile is ready ;-)
makedepend: makedepend.SH config.sh
sh ./makedepend.SH
test-prep: miniperl perl preplibrary $(dynamic_ext)
cd t && (rm -f perl$(EXE_EXT); $(LNS) ../perl$(EXE_EXT) perl$(EXE_EXT))
test check: test-prep
cd t && ./perl TEST </dev/tty
# For testing without a tty or controling terminal. See t/op/stat.t
test-notty: test-prep
cd t && PERL_SKIP_TTY_TEST=1 ./perl TEST
# Can't depend on lib/Config.pm because that might be where miniperl
# is crashing.
minitest: miniperl
@echo "You may see some irrelevant test failures if you have been unable"
@echo "to build lib/Config.pm."
- cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
&& ./perl TEST base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t </dev/tty
clist: $(c)
echo $(c) | tr ' ' '\012' >.clist
hlist: $(h)
echo $(h) | tr ' ' '\012' >.hlist
shlist: $(sh)
echo $(sh) | tr ' ' '\012' >.shlist
pllist: $(pl)
echo $(pl) | tr ' ' '\012' >.pllist
Makefile: Makefile.SH ./config.sh
$(SHELL) Makefile.SH
distcheck: FORCE
perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()'
# AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
# If this runs make out of memory, delete /usr/include lines.
!NO!SUBS!
$eunicefix Makefile
case `pwd` in
*SH)
$rm -f ../Makefile
$ln Makefile ../Makefile
;;
esac
$rm -f $firstmakefile
Jump to Line
Something went wrong with that request. Please try again.