Skip to content
This repository

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
tag: timinator
Fetching contributors…

Cannot retrieve contributors at this time

file 571 lines (461 sloc) 17.764 kb
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571
#! /bin/sh
case $CONFIG in
'')
if test -f config.sh; then TOP=.;
elif test -f ../config.sh; then TOP=..;
elif test -f ../../config.sh; then TOP=../..;
elif test -f ../../../config.sh; then TOP=../../..;
elif test -f ../../../../config.sh; then TOP=../../../..;
else
echo "Can't find config.sh."; exit 1
fi
. $TOP/config.sh
;;
esac
: This forces SH files to create target in same directory as SH file.
: This is so that make depend always knows where to find SH derivatives.
case "$0" in
*/*) cd `expr X$0 : 'X\(.*\)/'` ;;
esac

case "$d_dosuid" in
*define*) suidperl='suidperl' ;;
*) suidperl='';;
esac

linklibperl='$(LIBPERL)'
shrpldflags='$(LDDLFLAGS)'
case "$useshrplib" in
true)
pldlflags="$cccdlflags"
# NeXT-4 specific stuff. Can't we do this in the hint file?
case "${osname}${osvers}" in
next4*)
ld=libtool
lddlflags="-dynamic -undefined warning -framework System \
-compatibility_version 1 -current_version $patchlevel \
-prebind -seg1addr 0x27000000 -install_name \$(shrpdir)/\$@"
;;
sunos*|freebsd[23]*|netbsd*)
linklibperl="-lperl"
;;
aix*)
shrpldflags="-H512 -T512 -bhalt:4 -bM:SRE -bE:perl.exp"
case "$osvers" in
3*)
shrpldflags="$shrpldflags -e _nostart $ldflags $libs $cryptlib"
;;
*)
shrpldflags="$shrpldflags -b noentry $ldflags $libs $cryptlib"
;;
esac
aixinstdir=`pwd | sed 's/\/UU$//'`
linklibperl="-L $archlibexp/CORE -L $aixinstdir -lperl"
;;
hpux10*)
linklibperl="-L `pwd | sed 's/\/UU$//'` -Wl,+b$archlibexp/CORE -lperl"
;;
esac
;;
*) pldlflags=''
;;
esac

: Prepare dependency lists for Makefile.
dynamic_list=' '
for f in $dynamic_ext; do
    : the dependency named here will never exist
      base=`echo "$f" | sed 's/.*\///'`
    dynamic_list="$dynamic_list lib/auto/$f/$base.$dlext"
done

static_list=' '
for f in $static_ext; do
base=`echo "$f" | sed 's/.*\///'`
static_list="$static_list lib/auto/$f/$base\$(LIB_EXT)"
done

echo "Extracting Makefile (with variable substitutions)"
$spitshell >Makefile <<!GROK!THIS!
# Makefile.SH
# This file is derived from Makefile.SH. Any changes made here will
# be lost the next time you run Configure.
# Makefile is used to generate $firstmakefile. The only difference
# is that $firstmakefile has the dependencies filled in at the end.
#
#
# I now supply perly.c with the kits, so don't remake perly.c without byacc
BYACC = $byacc
CC = $cc
LD = $ld

LDFLAGS = $ldflags
CLDFLAGS = $ldflags

SMALL = $small
LARGE = $large $split
mallocsrc = $mallocsrc
mallocobj = $mallocobj
LNS = $lns
RMS = rm -f
ranlib = $ranlib

# The following are mentioned only to make metaconfig include the
# appropriate questions in Configure. If you want to change these,
# edit config.sh instead, or specify --man1dir=/wherever on
# installman commandline.
bin = $installbin
scriptdir = $scriptdir
shrpdir = $archlibexp/CORE
privlib = $installprivlib
man1dir = $man1dir
man1ext = $man1ext
man3dir = $man3dir
man3ext = $man3ext

# The following are used to build and install shared libraries for
# dynamic loading.
LDDLFLAGS = $lddlflags
SHRPLDFLAGS = $shrpldflags
CCDLFLAGS = $ccdlflags
DLSUFFIX = .$dlext
PLDLFLAGS = $pldlflags
LIBPERL = $libperl
LLIBPERL= $linklibperl
SHRPENV = $shrpenv

dynamic_ext = $dynamic_list
static_ext = $static_list
ext = \$(dynamic_ext) \$(static_ext)
DYNALOADER = lib/auto/DynaLoader/DynaLoader\$(LIB_EXT)

libs = $libs $cryptlib

public = perl $suidperl utilities translators

shellflags = $shellflags

# This is set to MAKE=$make if your $make command doesn't
# do it for you.
$make_set_make

# These variables will be used in a future version to make
# the make file more portable to non-unix systems.
AR = $ar
EXE_EXT = $exe_ext
LIB_EXT = $lib_ext
OBJ_EXT = $obj_ext
PATH_SEP = $path_sep

FIRSTMAKEFILE = $firstmakefile

# Any special object files needed by this architecture, e.g. os2/os2.obj
ARCHOBJS = $archobjs

.SUFFIXES: .c \$(OBJ_EXT)

# grrr
SHELL = $sh

!GROK!THIS!

## In the following dollars and backticks do not need the extra backslash.
$spitshell >>Makefile <<'!NO!SUBS!'

CCCMD = `sh $(shellflags) cflags $(LIBPERL) $@`

private = preplibrary lib/ExtUtils/Miniperl.pm lib/Config.pm

# Files to be built with variable substitution before miniperl
# is available.
sh = Makefile.SH cflags.SH config_h.SH makeaperl.SH makedepend.SH \
makedir.SH perl_exp.SH writemain.SH

shextract = Makefile cflags config.h makeaperl makedepend \
makedir perl.exp writemain

# Files to be built with variable substitution after miniperl is
# available. Dependencies handled manually below (for now).

pl = pod/pod2html.PL pod/pod2latex.PL pod/pod2man.PL pod/pod2text.PL

plextract = pod/pod2html pod/pod2latex pod/pod2man pod/pod2text

addedbyconf = UU $(shextract) $(plextract) pstruct

h1 = EXTERN.h INTERN.h XSUB.h av.h config.h cop.h cv.h dosish.h
h2 = embed.h form.h gv.h handy.h hv.h keywords.h mg.h op.h
h3 = opcode.h patchlevel.h perl.h perly.h pp.h proto.h regcomp.h
h4 = regexp.h scope.h sv.h unixish.h util.h perlio.h
h = $(h1) $(h2) $(h3) $(h4)

c1 = $(mallocsrc) av.c scope.c op.c doop.c doio.c dump.c hv.c mg.c
c2 = perl.c perly.c pp.c pp_hot.c pp_ctl.c pp_sys.c regcomp.c regexec.c
c3 = gv.c sv.c taint.c toke.c util.c deb.c run.c universal.c globals.c perlio.c

c = $(c1) $(c2) $(c3) miniperlmain.c perlmain.c

obj1 = $(mallocobj) gv$(OBJ_EXT) toke$(OBJ_EXT) perly$(OBJ_EXT) op$(OBJ_EXT) regcomp$(OBJ_EXT) dump$(OBJ_EXT) util$(OBJ_EXT) mg$(OBJ_EXT)
obj2 = hv$(OBJ_EXT) av$(OBJ_EXT) run$(OBJ_EXT) pp_hot$(OBJ_EXT) sv$(OBJ_EXT) pp$(OBJ_EXT) scope$(OBJ_EXT) pp_ctl$(OBJ_EXT) pp_sys$(OBJ_EXT)
obj3 = doop$(OBJ_EXT) doio$(OBJ_EXT) regexec$(OBJ_EXT) taint$(OBJ_EXT) deb$(OBJ_EXT) universal$(OBJ_EXT) globals$(OBJ_EXT) perlio$(OBJ_EXT)

obj = $(obj1) $(obj2) $(obj3) $(ARCHOBJS)

# Once perl has been Configure'd and built ok you build different
# perl variants (Debugging, Embedded, Multiplicity etc) by saying:
# make clean; make LIBPERL=libperl<type>.a
# where <type> is some combination of 'd' and(or) 'e' or 'm'.
# See cflags to understand how this works.
#
# This mechanism is getting clunky and might not even work any more.
# EMBEDDING is on by default, and MULTIPLICITY doesn't work.
#

lintflags = -hbvxac

.c$(OBJ_EXT):
$(CCCMD) $(PLDLFLAGS) $*.c

all: $(FIRSTMAKEFILE) miniperl $(private) $(plextract) $(public) $(dynamic_ext)
@echo " "; echo " Everything is up to date."

translators: miniperl lib/Config.pm FORCE
@echo " "; echo " Making x2p stuff"; cd x2p; $(MAKE) all

utilities: miniperl lib/Config.pm FORCE
@echo " "; echo " Making utilities"; cd utils; $(MAKE) all


# This is now done by installman only if you actually want the man pages.
# @echo " "; echo " Making docs"; cd pod; $(MAKE) all;

# Phony target to force checking subdirectories.
# Apparently some makes require an action for the FORCE target.
FORCE:
@sh -c true

miniperlmain$(OBJ_EXT): miniperlmain.c
$(CCCMD) $(PLDLFLAGS) $*.c

perlmain.c: miniperlmain.c config.sh $(FIRSTMAKEFILE)
sh writemain $(DYNALOADER) $(static_ext) > tmp
sh mv-if-diff tmp perlmain.c

perlmain$(OBJ_EXT): perlmain.c
$(CCCMD) $(PLDLFLAGS) $*.c

# The file ext.libs is a list of libraries that must be linked in
# for static extensions, e.g. -lm -lgdbm, etc. The individual
# static extension Makefile's add to it.
ext.libs: $(static_ext)
-@test -f ext.libs || touch ext.libs

!NO!SUBS!

# How to build libperl. This is still rather convoluted.
# Load up custom Makefile.SH fragment for shared loading and executables:
if test -r $osname/Makefile.SHs ; then
. $osname/Makefile.SHs
$spitshell >>Makefile <<!GROK!THIS!

Makefile: $osname/Makefile.SHs
!GROK!THIS!
else
$spitshell >>Makefile <<'!NO!SUBS!'
$(LIBPERL): $& perl$(OBJ_EXT) $(obj)
!NO!SUBS!
case "$useshrplib" in
true)
$spitshell >>Makefile <<'!NO!SUBS!'
$(LD) $(SHRPLDFLAGS) -o $@ perl$(OBJ_EXT) $(obj)
!NO!SUBS!
case "$osname" in
aix)
$spitshell >>Makefile <<'!NO!SUBS!'
mv $@ libperl$(OBJ_EXT)
$(AR) qv $(LIBPERL) libperl$(OBJ_EXT)
!NO!SUBS!
;;
esac
;;
*)
$spitshell >>Makefile <<'!NO!SUBS!'
rm -f $(LIBPERL)
$(AR) rcu $(LIBPERL) perl$(OBJ_EXT) $(obj)
@$(ranlib) $(LIBPERL)
!NO!SUBS!
;;
esac
$spitshell >>Makefile <<'!NO!SUBS!'

# How to build executables.

# The $& notation tells Sequent machines that it can do a parallel make,
# and is harmless otherwise.
# The miniperl -w -MExporter line is a basic cheap test to catch errors
# before make goes on to run preplibrary and then MakeMaker on extensions.
# This is very handy because later errors are often caused by miniperl
# build problems but that's not obvious to the novice.
# The Module used here must not depend on Config or any extensions.

miniperl: $& miniperlmain$(OBJ_EXT) $(LIBPERL)
$(CC) $(LARGE) $(CLDFLAGS) -o miniperl miniperlmain$(OBJ_EXT) $(LLIBPERL) $(libs)
@./miniperl -w -Ilib -MExporter -e 0 || $(MAKE) minitest

perl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
$(SHRPENV) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o perl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)

pureperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
$(SHRPENV) purify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o pureperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)

purecovperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
$(SHRPENV) purecov $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o purecovperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)

quantperl: $& perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
$(SHRPENV) quantify $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o quantperl perlmain$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)

# This version, if specified in Configure, does ONLY those scripts which need
# set-id emulation. Suidperl must be setuid root. It contains the "taint"
# checks as well as the special code to validate that the script in question
# has been invoked correctly.

suidperl: $& sperl$(OBJ_EXT) perlmain$(OBJ_EXT) $(LIBPERL) $(DYNALOADER) $(static_ext) ext.libs
$(SHRPENV) $(CC) $(LARGE) $(CLDFLAGS) $(CCDLFLAGS) -o suidperl perlmain$(OBJ_EXT) sperl$(OBJ_EXT) $(DYNALOADER) $(static_ext) $(LLIBPERL) `cat ext.libs` $(libs)

!NO!SUBS!

fi

$spitshell >>Makefile <<'!NO!SUBS!'

sperl$(OBJ_EXT): perl.c perly.h patchlevel.h $(h)
$(RMS) sperl.c
$(LNS) perl.c sperl.c
$(CCCMD) -DIAMSUID sperl.c
$(RMS) sperl.c

# We have to call our ./makedir because Ultrix 4.3 make can't handle the line
# test -d lib/auto || mkdir lib/auto
#
preplibrary: miniperl lib/Config.pm $(plextract)
@sh ./makedir lib/auto
@echo " AutoSplitting perl library"
@./miniperl -Ilib -e 'use AutoSplit; \
autosplit_lib_modules(@ARGV)' lib/*.pm lib/*/*.pm

# Take care to avoid modifying lib/Config.pm without reason
# (If trying to create a new port and having problems with the configpm script,
# try 'make minitest' and/or commenting out the tests at the end of configpm.)
lib/Config.pm: config.sh miniperl configpm
./miniperl configpm tmp
sh mv-if-diff tmp lib/Config.pm

lib/ExtUtils/Miniperl.pm: miniperlmain.c miniperl minimod.pl lib/Config.pm
./miniperl minimod.pl > tmp && mv tmp $@

$(plextract): miniperl lib/Config.pm
./miniperl -Ilib $@.PL

install: all install.perl install.man

install.perl: all installperl
./perl installperl

install.man: all installman
./perl installman

# XXX Experimental. Hardwired values, but useful for testing.
# Eventually Configure could ask for some of these values.
install.html: all installhtml
./perl installhtml \
      --podroot=. --podpath=. --recurse \
      --htmldir=$(privlib)/html \
      --htmlroot=$(privlib)/html \
      --splithead=pod/perlipc \
      --splititem=pod/perlfunc \
      --libpods=perlfunc:perlguts:perlvar:perlrun:perlop \
      --verbose


# I now supply perly.c with the kits, so the following section is
# used only if you force byacc to run by saying
# make run_byacc
# Since we patch up the byacc output, the perly.fixer script needs
# to run with precisely the same version of byacc as I use. You
# normally shouldn't remake perly.[ch].

run_byacc: FORCE
@ echo 'Expect' 113 shift/reduce and 1 reduce/reduce conflict
$(BYACC) -d perly.y
chmod 664 perly.c
sh $(shellflags) ./perly.fixer y.tab.c perly.c
sed -e 's/fprintf *( *stderr *,/PerlIO_printf(Perl_debug_log,/g' \
-e 's/y\.tab/perly/g' perly.c >perly.tmp && mv perly.tmp perly.c
echo 'extern YYSTYPE yylval;' >>y.tab.h
cmp -s y.tab.h perly.h && rm -f y.tab.h || mv y.tab.h perly.h
chmod 664 vms/perly_c.vms vms/perly_h.vms
perl vms/vms_yfix.pl perly.c perly.h vms/perly_c.vms vms/perly_h.vms

# We don't want to regenerate perly.c and perly.h, but they might
# appear out-of-date after a patch is applied or a new distribution is
# made.
perly.c: perly.y
-@sh -c true

perly.h: perly.y
-@sh -c true

# The following three header files are generated automatically
# keywords.h: keywords.pl
# opcode.h: opcode.pl
# embed.h: embed.pl global.sym interp.sym
# The correct versions should be already supplied with the perl kit,
# in case you don't have perl available.
# To force them to run, type
# make regen_headers
regen_headers: FORCE
perl keywords.pl
perl opcode.pl
perl embed.pl

# Extensions:
# Names added to $(dynamic_ext) or $(static_ext) will automatically
# get built. There should ordinarily be no need to change any of
# this part of makefile.
#
# The dummy dependency is a place holder in case $(dynamic_ext) or
# $(static_ext) is empty.
#
# DynaLoader may be needed for extensions that use Makefile.PL.

$(DYNALOADER): miniperl preplibrary FORCE
@sh ext/util/make_ext static $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)

d_dummy $(dynamic_ext): miniperl preplibrary $(DYNALOADER) FORCE
@sh ext/util/make_ext dynamic $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)

s_dummy $(static_ext): miniperl preplibrary $(DYNALOADER) FORCE
@sh ext/util/make_ext static $@ MAKE=$(MAKE) LIBPERL_A=$(LIBPERL)

clean: _tidy _mopup

realclean: _cleaner _mopup
@echo "Note that make realclean does not delete config.sh"

clobber: _cleaner _mopup
rm -f config.sh cppstdin

distclean: clobber

# Do not 'make _mopup' directly.
_mopup:
rm -f *$(OBJ_EXT) *$(LIB_EXT) all perlmain.c
rm -f perl.exp ext.libs
-rm -f perl.export perl.dll perl.libexp perl.map perl.def
rm -f perl suidperl miniperl $(LIBPERL)

# Do not 'make _tidy' directly.
_tidy:
-cd pod; $(MAKE) clean
-cd utils; $(MAKE) clean
-cd x2p; $(MAKE) clean
-@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \
sh ext/util/make_ext clean $$x MAKE=$(MAKE) ; \
done

# Do not 'make _cleaner' directly.
_cleaner:
-cd os2; rm -f Makefile
-cd pod; $(MAKE) realclean
-cd utils; $(MAKE) realclean
-cd x2p; $(MAKE) realclean
-@for x in $(DYNALOADER) $(dynamic_ext) $(static_ext) ; do \
sh ext/util/make_ext realclean $$x MAKE=$(MAKE) ; \
done
rm -f *.orig */*.orig *~ */*~ core t/core t/c t/perl
rm -rf $(addedbyconf)
rm -f $(FIRSTMAKEFILE) $(FIRSTMAKEFILE).old
rm -f $(private)
rm -rf lib/auto
rm -f lib/.exists
rm -f h2ph.man pstruct
rm -rf .config

# The following lint has practically everything turned on. Unfortunately,
# you have to wade through a lot of mumbo jumbo that can't be suppressed.
# If the source file has a /*NOSTRICT*/ somewhere, ignore the lint message
# for that spot.

lint: perly.c $(c)
lint $(lintflags) $(defs) perly.c $(c) > perl.fuzz

# Need to unset during recursion to go out of loop.
# The README below ensures that the dependency list is never empty and
# that when MAKEDEPEND is empty $(FIRSTMAKEFILE) doesn't need rebuilding.

MAKEDEPEND = Makefile makedepend

$(FIRSTMAKEFILE): README $(MAKEDEPEND)
$(MAKE) depend MAKEDEPEND=

config.h: config_h.SH config.sh
$(SHELL) config_h.SH

perl.exp: perl_exp.SH config.sh
$(SHELL) perl_exp.SH

# When done, touch perlmain.c so that it doesn't get remade each time.
depend: makedepend
sh ./makedepend MAKE=$(MAKE)
- test -s perlmain.c && touch perlmain.c
cd x2p; $(MAKE) depend

# Cannot postpone this until $firstmakefile is ready ;-)
makedepend: makedepend.SH config.sh
sh ./makedepend.SH

test-prep: miniperl perl preplibrary $(dynamic_ext)
cd t && (rm -f perl$(EXE_EXT); $(LNS) ../perl$(EXE_EXT) perl$(EXE_EXT))

test check: test-prep
cd t && ./perl TEST </dev/tty

# For testing without a tty or controling terminal. See t/op/stat.t
test-notty: test-prep
cd t && PERL_SKIP_TTY_TEST=1 ./perl TEST

# Can't depend on lib/Config.pm because that might be where miniperl
# is crashing.
minitest: miniperl
@echo "You may see some irrelevant test failures if you have been unable"
@echo "to build lib/Config.pm."
- cd t && (rm -f perl$(EXE_EXT); $(LNS) ../miniperl$(EXE_EXT) perl$(EXE_EXT)) \
&& ./perl TEST base/*.t comp/*.t cmd/*.t io/*.t op/*.t pragma/*.t </dev/tty

# Handy way to run perlbug -ok without having to install and run the
# installed perlbug. We don't re-run the tests here - we trust the user.
# Please *don't* use this unless all tests pass.
# If you want to report test failures, just use "perlbug -Ilib".
ok:
./perl -Ilib utils/perlbug -ok -s '(UNINSTALLED)'

clist: $(c)
echo $(c) | tr ' ' '\012' >.clist

hlist: $(h)
echo $(h) | tr ' ' '\012' >.hlist

shlist: $(sh)
echo $(sh) | tr ' ' '\012' >.shlist

pllist: $(pl)
echo $(pl) | tr ' ' '\012' >.pllist

Makefile: Makefile.SH ./config.sh
$(SHELL) Makefile.SH

distcheck: FORCE
perl '-MExtUtils::Manifest=&fullcheck' -e 'fullcheck()'

# AUTOMATICALLY GENERATED MAKE DEPENDENCIES--PUT NOTHING BELOW THIS LINE
# If this runs make out of memory, delete /usr/include lines.
!NO!SUBS!

$eunicefix Makefile
case `pwd` in
*SH)
    $rm -f ../Makefile
    $ln Makefile ../Makefile
    ;;
esac
$rm -f $firstmakefile
Something went wrong with that request. Please try again.