### CMD echo hostname LiMe-eb7f64 hostname LiMe-eb7f64 ### CMD date '+%Y-%m-%d %H:%M:%S' 2022-12-07 17:41:01 ### CMD uptime 17:41:01 up 1 min, load average: 0.58, 0.20, 0.07 ### FILE /etc/board.json { "model": { "id": "youhua,wr1200js", "name": "YouHua WR1200JS" }, "led": { "internet": { "name": "INTERNET", "sysfs": "green:wan", "type": "netdev", "device": "wan", "mode": "link tx rx" } }, "network": { "lan": { "ports": [ "lan1", "lan2", "lan3", "lan4" ], "protocol": "static" }, "wan": { "device": "wan", "protocol": "dhcp" } }, "system": { "compat_version": "1.1" } } ### FILE /proc/cpuinfo system type : MediaTek MT7621 ver:1 eco:3 machine : YouHua WR1200JS processor : 0 cpu model : MIPS 1004Kc V2.15 BogoMIPS : 586.13 wait instruction : yes microsecond timers : yes tlb_entries : 32 extra interrupt vector : yes hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb] isa : mips1 mips2 mips32r1 mips32r2 ASEs implemented : mips16 dsp mt Options implemented : tlb 4kex 4k_cache prefetch mcheck ejtag llsc pindexed_dcache userlocal vint perf_cntr_intr_bit cdmm perf shadow register sets : 1 kscratch registers : 0 package : 0 core : 0 VPE : 0 VCED exceptions : not available VCEI exceptions : not available processor : 1 cpu model : MIPS 1004Kc V2.15 BogoMIPS : 586.13 wait instruction : yes microsecond timers : yes tlb_entries : 32 extra interrupt vector : yes hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb] isa : mips1 mips2 mips32r1 mips32r2 ASEs implemented : mips16 dsp mt Options implemented : tlb 4kex 4k_cache prefetch mcheck ejtag llsc pindexed_dcache userlocal vint perf_cntr_intr_bit cdmm perf shadow register sets : 1 kscratch registers : 0 package : 0 core : 0 VPE : 1 VCED exceptions : not available VCEI exceptions : not available processor : 2 cpu model : MIPS 1004Kc V2.15 BogoMIPS : 586.13 wait instruction : yes microsecond timers : yes tlb_entries : 32 extra interrupt vector : yes hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb] isa : mips1 mips2 mips32r1 mips32r2 ASEs implemented : mips16 dsp mt Options implemented : tlb 4kex 4k_cache prefetch mcheck ejtag llsc pindexed_dcache userlocal vint perf_cntr_intr_bit cdmm perf shadow register sets : 1 kscratch registers : 0 package : 0 core : 1 VPE : 0 VCED exceptions : not available VCEI exceptions : not available processor : 3 cpu model : MIPS 1004Kc V2.15 BogoMIPS : 586.13 wait instruction : yes microsecond timers : yes tlb_entries : 32 extra interrupt vector : yes hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb] isa : mips1 mips2 mips32r1 mips32r2 ASEs implemented : mips16 dsp mt Options implemented : tlb 4kex 4k_cache prefetch mcheck ejtag llsc pindexed_dcache userlocal vint perf_cntr_intr_bit cdmm perf shadow register sets : 1 kscratch registers : 0 package : 0 core : 1 VPE : 1 VCED exceptions : not available VCEI exceptions : not available ### FILE /etc/lime_release LIME_ID="LiMe" LIME_RELEASE="staging202210" LIME_CODENAME="development" LIME_BRANCH="staging202210" LIME_REVISION="7c40b80" LIME_DESCRIPTION="LiMe staging202210 development (staging202210 rev. 7c40b80 20221207_1738)" LIME_BUILDDATE="20221207_1738" ### FILE /etc/openwrt_release DISTRIB_ID='LiMe' DISTRIB_RELEASE='staging202210' DISTRIB_REVISION='7c40b80' DISTRIB_TARGET='ramips/mt7621' DISTRIB_ARCH='mipsel_24kc' DISTRIB_DESCRIPTION='LiMe staging202210 development (staging202210 rev. 7c40b80 20221207_1738)' DISTRIB_TAINTS='no-all busybox' ### FILE /etc/openwrt_version r19958-309a6f22ba ### FILE /etc/config/lime-node # Read the documentation in /docs directory # and on http://libremesh.org ### System options config lime system ### Network general option config lime network ### WiFi general options config lime wifi ### FILE /etc/config/lime-community # Read the documentation in /docs directory # and on http://libremesh.org ### System options config lime system ### Network general option config lime network ### WiFi general options config lime wifi ### FILE /etc/config/lime-defaults # Beware this file is NOT supposed to be edited by the end user, modify /etc/config/lime-node instead # If the same option or list is defined both in /etc/config/lime-node and lime-community file, the former will prevail # Beware this file is not supposed to store interface specific configuration, like "config net eth0" # Read the documentation in /docs directory # and on http://libremesh.org config lime system option hostname 'LiMe-%M4%M5%M6' option domain 'thisnode.info' option keep_on_upgrade 'libremesh dropbear minimum-essential /etc/sysupgrade.conf' option deferable_reboot_uptime_s '97200' option firstbootwizard_configured false option firstbootwizard_dismissed false config lime network option primary_interface 'eth0' option main_ipv4_address '10.%N1.0.0/16' option anygw_dhcp_start '2' option anygw_dhcp_limit '0' option main_ipv6_address 'fd%N1:%N2%N3:%N4%N5::/64' list protocols ieee80211s list protocols lan list protocols anygw list protocols batadv:%N1 list protocols bmx6:13 list protocols olsr:14 list protocols olsr6:15 list protocols olsr2:16 list protocols babeld:17 list protocols bmx7:18 list resolvers 4.2.2.2 # b.resolvers.Level3.net list resolvers 141.1.1.1 # cns1.cw.net list resolvers 2001:470:20::2 # ordns.he.net option bmx6_mtu '1500' option bmx6_publish_ownip false option bmx6_over_batman false option bmx6_pref_gw none option bmx6_wifi_rate_max 54000000 option bmx7_mtu '1500' option bmx7_publish_ownip false option bmx7_over_batman false option bmx7_pref_gw none option bmx7_wifi_rate_max 'auto' option bmx7_enable_pki false option anygw_mac "aa:aa:aa:%N1:%N2:aa" option use_odhcpd false config lime wifi list modes 'ap' list modes 'apname' list modes 'ieee80211s' option ap_ssid 'LibreMesh.org' option apname_ssid 'LibreMesh.org/%H' option adhoc_ssid 'LiMe' option adhoc_bssid 'ca:fe:00:c0:ff:ee' option ieee80211s_mesh_fwding '0' option ieee80211s_mesh_id 'LiMe' config lime-wifi-band '2ghz' option channel '11' option htmode 'HT20' option distance '100' option adhoc_mcast_rate '24000' option ieee80211s_mcast_rate '24000' config lime-wifi-band '5ghz' list channel '48' list channel '157' option htmode 'HT40' option distance '1000' option adhoc_mcast_rate '6000' option ieee80211s_mcast_rate '6000' config generic_uci_config uhttpd_https list uci_set 'uhttpd.main.redirect_https=0' ### FILE /etc/config/lime-autogen # DO NOT EDIT THIS FILE!. This is autogenerated by lime-config! # Instead please edit /etc/config/lime-node and/or /etc/config/lime-community files # and then regenerate this file executing lime-config config lime-wifi-band '5ghz' option distance '1000' option adhoc_mcast_rate '6000' option htmode 'HT40' option ieee80211s_mcast_rate '6000' list channel '48' list channel '157' config lime 'network' option bmx6_publish_ownip 'false' option bmx6_wifi_rate_max '54000000' option main_ipv4_address '10.%N1.0.0/16' option bmx6_mtu '1500' option bmx7_pref_gw 'none' option bmx6_pref_gw 'none' option main_ipv6_address 'fd%N1:%N2%N3:%N4%N5::/64' option bmx6_over_batman 'false' option use_odhcpd 'false' option anygw_mac 'aa:aa:aa:%N1:%N2:aa' option bmx7_enable_pki 'false' option primary_interface 'eth0' option bmx7_publish_ownip 'false' option anygw_dhcp_limit '0' option bmx7_mtu '1500' option bmx7_wifi_rate_max 'auto' option anygw_dhcp_start '2' option bmx7_over_batman 'false' list resolvers '4.2.2.2' list resolvers '141.1.1.1' list resolvers '2001:470:20::2' list protocols 'ieee80211s' list protocols 'lan' list protocols 'anygw' list protocols 'batadv:%N1' list protocols 'bmx6:13' list protocols 'olsr:14' list protocols 'olsr6:15' list protocols 'olsr2:16' list protocols 'babeld:17' list protocols 'bmx7:18' config generic_uci_config 'uhttpd_https' list uci_set 'uhttpd.main.redirect_https=0' config lime-wifi-band '2ghz' option distance '100' option channel '11' option adhoc_mcast_rate '24000' option htmode 'HT20' option ieee80211s_mcast_rate '24000' config lime 'wifi' option apname_ssid 'LibreMesh.org/%H' option ap_ssid 'LibreMesh.org' option ieee80211s_mesh_id 'LiMe' option ieee80211s_mesh_fwding '0' option adhoc_bssid 'ca:fe:00:c0:ff:ee' option adhoc_ssid 'LiMe' list modes 'ap' list modes 'apname' list modes 'ieee80211s' config lime 'system' option firstbootwizard_dismissed 'false' option domain 'thisnode.info' option keep_on_upgrade 'libremesh dropbear minimum-essential /etc/sysupgrade.conf' option firstbootwizard_configured 'false' option deferable_reboot_uptime_s '97200' option hostname 'LiMe-%M4%M5%M6' ### FILE /etc/config/network config interface 'loopback' option device 'lo' option proto 'static' option ipaddr '127.0.0.1' option netmask '255.0.0.0' config globals 'globals' option packet_steering '1' config device option name 'br-lan' option type 'bridge' list ports 'lan1' list ports 'lan2' list ports 'lan3' list ports 'lan4' config interface 'lan' option device 'br-lan' option proto 'static' option ip6assign '60' option ip6addr 'fd0d:fe46:8ce8::eb:7f64/64' option ipaddr '10.13.127.100' option netmask '255.255.0.0' option mtu '1500' list ifname 'bat0' list ifname 'eth0' config interface 'wan' option device 'wan' option proto 'none' config interface 'wan6' option device 'wan' option proto 'none' config device 'lm_net_br_lan_anygw_dev' option type 'macvlan' option name 'anygw' option ifname 'br-lan' option macaddr 'aa:aa:aa:0d:fe:aa' config interface 'lm_net_br_lan_anygw_if' option ifname 'anygw' option auto '1' option netmask '255.255.0.0' option proto 'static' option ipaddr '10.13.0.1' option ip6addr 'fd0d:fe46:8ce8::1/64' config rule6 'lm_net_anygw_rule6' option src 'fd0d:fe46:8ce8::1/128' option lookup '170' config route6 'lm_net_anygw_route6' option interface 'lm_net_br_lan_anygw_if' option target 'fd0d:fe46:8ce8::/64' option table '170' config rule 'lm_net_anygw_rule4' option src '10.13.0.1/32' option lookup '170' config route 'lm_net_anygw_route4' option interface 'lm_net_br_lan_anygw_if' option target '10.13.0.0' option netmask '255.255.0.0' option table '170' config interface 'bat0' option proto 'batadv' option bridge_loop_avoidance '1' option multicast_mode '0' option distributed_arp_table '0' option gw_mode 'client' config interface 'lm_net_wlan0_mesh' option proto 'none' option mtu '1536' option auto '1' config device 'lm_net_wlan0_mesh_batadv_dev' option type '8021ad' option name 'wlan0-mesh_29' option ifname '@lm_net_wlan0_mesh' option vid '29' option macaddr '02:58:47:eb:7f:64' option mtu '1532' config interface 'lm_net_wlan0_mesh_batadv_if' option auto '1' option ifname 'wlan0-mesh_29' option proto 'batadv_hardif' option master 'bat0' config device 'lm_net_wlan0_mesh_babeld_dev' option type '8021ad' option name 'wlan0-mesh_17' option ifname '@lm_net_wlan0_mesh' option vid '17' config interface 'lm_net_wlan0_mesh_babeld_if' option auto '1' option ifname 'wlan0-mesh_17' option proto 'static' option ipaddr '10.13.127.100' option netmask '255.255.255.255' config interface 'lm_net_wlan1_mesh' option proto 'none' option mtu '1536' option auto '1' config device 'lm_net_wlan1_mesh_batadv_dev' option type '8021ad' option name 'wlan1-mesh_29' option ifname '@lm_net_wlan1_mesh' option vid '29' option macaddr '02:ab:46:eb:7f:64' option mtu '1532' config interface 'lm_net_wlan1_mesh_batadv_if' option auto '1' option ifname 'wlan1-mesh_29' option proto 'batadv_hardif' option master 'bat0' config device 'lm_net_wlan1_mesh_babeld_dev' option type '8021ad' option name 'wlan1-mesh_17' option ifname '@lm_net_wlan1_mesh' option vid '17' config interface 'lm_net_wlan1_mesh_babeld_if' option auto '1' option ifname 'wlan1-mesh_17' option proto 'static' option ipaddr '10.13.127.100' option netmask '255.255.255.255' config device 'lm_net_eth0_batadv_dev' option type '8021ad' option name 'eth0_29' option ifname 'eth0' option vid '29' option macaddr '02:95:39:eb:7f:64' option mtu '1496' config interface 'lm_net_eth0_batadv_if' option auto '1' option ifname 'eth0_29' option proto 'batadv_hardif' option master 'bat0' config device 'lm_net_eth0_babeld_dev' option type '8021ad' option name 'eth0_17' option ifname 'eth0' option vid '17' option mtu '1496' config interface 'lm_net_eth0_babeld_if' option auto '1' option ifname 'eth0_17' option proto 'static' option ipaddr '10.13.127.100' option netmask '255.255.255.255' ### FILE /etc/config/wireless config wifi-device 'radio0' option type 'mac80211' option path '1e140000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0' option band '2g' option htmode 'HT20' option disabled '0' option distance '100' option noscan '1' option channel '11' config wifi-device 'radio1' option type 'mac80211' option path '1e140000.pcie/pci0000:00/0000:00:01.0/0000:02:00.0' option band '5g' option disabled '0' option distance '1000' option noscan '1' option channel '48' option htmode 'HT40' config wifi-iface 'lm_wlan0_ap_radio0' option mode 'ap' option device 'radio0' option ifname 'wlan0-ap' option distance '100' option ssid 'LibreMesh.org' option network 'lan' config wifi-iface 'lm_wlan0_apname_radio0' option mode 'ap' option device 'radio0' option ifname 'wlan0-apname' option distance '100' option ssid 'LibreMesh.org/LiMe-eb7f64' option network 'lan' config wifi-iface 'lm_wlan0_mesh_radio0' option mode 'mesh' option device 'radio0' option ifname 'wlan0-mesh' option network 'lm_net_wlan0_mesh' option mcast_rate '24000' option distance '100' option mesh_fwding '0' option mesh_id 'LiMe' config wifi-iface 'lm_wlan1_ap_radio1' option mode 'ap' option device 'radio1' option ifname 'wlan1-ap' option distance '1000' option ssid 'LibreMesh.org' option network 'lan' config wifi-iface 'lm_wlan1_apname_radio1' option mode 'ap' option device 'radio1' option ifname 'wlan1-apname' option distance '1000' option ssid 'LibreMesh.org/LiMe-eb7f64' option network 'lan' config wifi-iface 'lm_wlan1_mesh_radio1' option mode 'mesh' option device 'radio1' option ifname 'wlan1-mesh' option network 'lm_net_wlan1_mesh' option mcast_rate '6000' option distance '1000' option mesh_fwding '0' option mesh_id 'LiMe' ### CMD dmesg [ 0.000000] Linux version 5.10.156 (ilario@iglaptop) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r19813-c1c85629b9) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 SMP Sun Dec 4 20:14:21 2022 [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3 [ 0.000000] printk: bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc) [ 0.000000] MIPS: machine is YouHua WR1200JS [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] VPE topology {2,2} total 4 [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] HighMem empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] Normal zone: 288 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 [ 0.000000] percpu: Embedded 15 pages/cpu s30224 r8192 d23024 u61440 [ 0.000000] pcpu-alloc: s30224 r8192 d23024 u61440 alloc=15*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480 [ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2 [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.000000] Writing ErrCtl register=000240e0 [ 0.000000] Readback ErrCtl register=000240e0 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 119288K/131072K available (6731K kernel code, 622K rwdata, 1368K rodata, 1248K init, 235K bss, 11784K reserved, 0K cma-reserved, 0K highmem) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 256 [ 0.000000] CPU Clock: 880MHz [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns [ 0.000014] sched_clock: 64 bits at 880MHz, resolution 1ns, wraps every 4398046511103ns [ 0.007945] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns [ 0.017010] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688) [ 0.083172] pid_max: default: 32768 minimum: 301 [ 0.087944] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.095147] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.105901] rcu: Hierarchical SRCU implementation. [ 0.110955] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.119072] smp: Bringing up secondary CPUs ... [ 0.124369] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.124379] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.124391] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.124472] CPU1 revision is: 0001992f (MIPS 1004Kc) [ 0.178853] Synchronize counters for CPU 1: done. [ 0.211157] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.211167] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.211176] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.211224] CPU2 revision is: 0001992f (MIPS 1004Kc) [ 0.270219] Synchronize counters for CPU 2: done. [ 0.300854] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes. [ 0.300865] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes [ 0.300874] MIPS secondary cache 256kB, 8-way, linesize 32 bytes. [ 0.300927] CPU3 revision is: 0001992f (MIPS 1004Kc) [ 0.355411] Synchronize counters for CPU 3: done. [ 0.385286] smp: Brought up 1 node, 4 CPUs [ 0.393594] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.403429] futex hash table entries: 1024 (order: 3, 32768 bytes, linear) [ 0.410475] pinctrl core: initialized pinctrl subsystem [ 0.418185] NET: Registered protocol family 16 [ 0.424749] cpuidle: using governor teo [ 0.447614] FPU Affinity set after 11720 emulations [ 0.477819] clocksource: Switched to clocksource GIC [ 0.484776] NET: Registered protocol family 2 [ 0.489491] IP idents hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.497452] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 0.505847] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.513443] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear) [ 0.520436] TCP: Hash tables configured (established 1024 bind 1024) [ 0.526859] UDP hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.533360] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear) [ 0.540551] NET: Registered protocol family 1 [ 0.544849] PCI: CLS 0 bytes, default 32 [ 0.551360] workingset: timestamp_bits=14 max_order=15 bucket_order=1 [ 0.561967] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.567815] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 0.580657] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 0.586526] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 0.592522] mt7621_gpio 1e000600.gpio: registering 32 gpios [ 0.598911] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled [ 0.607235] printk: console [ttyS0] disabled [ 0.611578] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A [ 0.620590] printk: console [ttyS0] enabled [ 0.628845] printk: bootconsole [early0] disabled [ 0.641346] spi-mt7621 1e000b00.spi: sys_freq: 220000000 [ 0.648446] spi-nor spi0.0: gd25q128 (16384 Kbytes) [ 0.653389] 4 fixed-partitions partitions found on MTD device spi0.0 [ 0.659816] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions [ 0.667115] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions [ 0.675386] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions [ 0.682759] OF: Bad cell count for /palmbus@1e000000/spi@b00/flash@0/partitions [ 0.690321] Creating 4 MTD partitions on "spi0.0": [ 0.695112] 0x000000000000-0x000000030000 : "u-boot" [ 0.701157] 0x000000030000-0x000000040000 : "u-boot-env" [ 0.707673] 0x000000040000-0x000000050000 : "factory" [ 0.713868] 0x000000050000-0x000001000000 : "firmware" [ 0.720432] 2 uimage-fw partitions found on MTD device firmware [ 0.726358] Creating 2 MTD partitions on "firmware": [ 0.731351] 0x000000000000-0x0000002a191c : "kernel" [ 0.736294] mtd: partition "kernel" doesn't end on an erase/write block -- force read-only [ 0.745695] 0x0000002a191c-0x000000fb0000 : "rootfs" [ 0.750688] mtd: partition "rootfs" doesn't start on an erase/write block boundary -- force read-only [ 0.760707] mtd: setting mtd5 (rootfs) as root device [ 0.765975] 1 squashfs-split partitions found on MTD device rootfs [ 0.772164] 0x0000005f0000-0x000000fb0000 : "rootfs_data" [ 0.829544] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module [ 0.839775] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21 [ 0.849373] i2c /dev entries driver [ 0.855786] mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges: [ 0.862547] mt7621-pci 1e140000.pcie: No bus range found for /pcie@1e140000, using [bus 00-ff] [ 0.871353] mt7621-pci 1e140000.pcie: MEM 0x0060000000..0x006fffffff -> 0x0000000000 [ 0.879527] mt7621-pci 1e140000.pcie: IO 0x001e160000..0x001e16ffff -> 0x0000000000 [ 0.887792] mt7621-pci 1e140000.pcie: Parsing DT failed [ 0.895534] NET: Registered protocol family 10 [ 0.901788] Segment Routing with IPv6 [ 0.905546] NET: Registered protocol family 17 [ 0.910545] 8021q: 802.1Q VLAN Support v1.8 [ 0.918423] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module [ 0.941953] mt7530 mdio-bus:1f wan (uninitialized): PHY [mt7530-0:00] driver [MediaTek MT7530 PHY] (irq=26) [ 0.954222] mt7530 mdio-bus:1f lan1 (uninitialized): PHY [mt7530-0:01] driver [MediaTek MT7530 PHY] (irq=27) [ 0.966603] mt7530 mdio-bus:1f lan2 (uninitialized): PHY [mt7530-0:02] driver [MediaTek MT7530 PHY] (irq=28) [ 0.979081] mt7530 mdio-bus:1f lan3 (uninitialized): PHY [mt7530-0:03] driver [MediaTek MT7530 PHY] (irq=29) [ 0.991456] mt7530 mdio-bus:1f lan4 (uninitialized): PHY [mt7530-0:04] driver [MediaTek MT7530 PHY] (irq=30) [ 1.004119] mt7530 mdio-bus:1f: configuring for fixed/rgmii link mode [ 1.014574] DSA: tree 0 setup [ 1.018082] rt2880-pinmux pinctrl: pcie is already enabled [ 1.023692] mt7621-pci 1e140000.pcie: host bridge /pcie@1e140000 ranges: [ 1.030426] mt7621-pci 1e140000.pcie: No bus range found for /pcie@1e140000, using [bus 00-ff] [ 1.039221] mt7621-pci 1e140000.pcie: MEM 0x0060000000..0x006fffffff -> 0x0000000000 [ 1.047370] mt7621-pci 1e140000.pcie: IO 0x001e160000..0x001e16ffff -> 0x0000000000 [ 1.055642] mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 (dual port = 1) [ 1.063428] mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 (dual port = 0) [ 1.071085] mt7621-pci 1e140000.pcie: failed to parse bus ranges property: -22 [ 1.178504] mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz [ 1.184074] mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz [ 1.289785] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK) [ 1.296723] mt7621-pci 1e140000.pcie: PCIE0 enabled [ 1.301590] mt7621-pci 1e140000.pcie: PCIE1 enabled [ 1.306452] mt7621-pci 1e140000.pcie: PCI coherence region base: 0x60000000, mask/settings: 0xf0000002 [ 1.315917] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00 [ 1.322291] pci_bus 0000:00: root bus resource [io 0x1e160000-0x1e16ffff] [ 1.329169] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] [ 1.336016] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.341495] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff] (bus address [0x00000000-0x0fffffff]) [ 1.351701] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400 [ 1.357719] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff] [ 1.363962] pci 0000:00:00.0: reg 0x14: [mem 0x60400000-0x6040ffff] [ 1.370284] pci 0000:00:00.0: supports D1 [ 1.374277] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 1.380481] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400 [ 1.386506] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff] [ 1.392788] pci 0000:00:01.0: reg 0x14: [mem 0x60410000-0x6041ffff] [ 1.399114] pci 0000:00:01.0: supports D1 [ 1.403107] pci 0000:00:01.0: PME# supported from D0 D1 D3hot [ 1.410450] pci 0000:01:00.0: [14c3:7603] type 00 class 0x028000 [ 1.416485] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 1.423530] pci 0000:01:00.0: reg 0x10: [mem size 0x00100000] [ 1.429408] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 1.436799] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 1.442052] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff] [ 1.448152] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] [ 1.454912] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref] [ 1.462124] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [ 1.469010] pci 0000:02:00.0: [14c3:7662] type 00 class 0x028000 [ 1.475036] pci 0000:02:00.0: reg 0x10: initial BAR value 0x00000000 invalid [ 1.482080] pci 0000:02:00.0: reg 0x10: [mem size 0x00100000 64bit] [ 1.488390] pci 0000:02:00.0: reg 0x30: initial BAR value 0x00000000 invalid [ 1.495407] pci 0000:02:00.0: reg 0x30: [mem size 0x00010000 pref] [ 1.501691] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 1.509175] pci 0000:00:01.0: PCI bridge to [bus 02-ff] [ 1.514400] pci 0000:00:01.0: bridge window [io 0x0000-0x0fff] [ 1.520498] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff] [ 1.527260] pci 0000:00:01.0: bridge window [mem 0x60300000-0x603fffff pref] [ 1.534472] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02 [ 1.541131] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000] [ 1.547740] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000] [ 1.554676] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000] [ 1.561273] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000] [ 1.568234] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff] [ 1.574995] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref] [ 1.582208] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff] [ 1.588987] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref] [ 1.596179] pci 0000:00:00.0: BAR 1: assigned [mem 0x60400000-0x6040ffff] [ 1.602961] pci 0000:00:01.0: BAR 1: assigned [mem 0x60410000-0x6041ffff] [ 1.609748] pci 0000:00:00.0: BAR 7: assigned [io 0x1e160000-0x1e160fff] [ 1.616507] pci 0000:00:01.0: BAR 7: assigned [io 0x1e161000-0x1e161fff] [ 1.623290] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff] [ 1.630077] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.635022] pci 0000:00:00.0: bridge window [io 0x1e160000-0x1e160fff] [ 1.641802] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff] [ 1.648579] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref] [ 1.655780] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff 64bit] [ 1.663085] pci 0000:02:00.0: BAR 6: assigned [mem 0x60300000-0x6030ffff pref] [ 1.670297] pci 0000:00:01.0: PCI bridge to [bus 02] [ 1.675242] pci 0000:00:01.0: bridge window [io 0x1e161000-0x1e161fff] [ 1.682015] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff] [ 1.688797] pci 0000:00:01.0: bridge window [mem 0x60300000-0x603fffff pref] [ 1.708184] mt7530 mdio-bus:1f: Link is Up - 1Gbps/Full - flow control rx/tx [ 1.717671] VFS: Mounted root (squashfs filesystem) readonly on device 31:5. [ 1.729467] Freeing unused kernel memory: 1248K [ 1.734007] This architecture does not have kernel memory protection. [ 1.740479] Run /sbin/init as init process [ 1.744555] with arguments: [ 1.744561] /sbin/init [ 1.744565] with environment: [ 1.744570] HOME=/ [ 1.744575] TERM=linux [ 2.630353] init: Console is alive [ 2.634201] init: - watchdog - [ 3.937905] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 4.088976] usbcore: registered new interface driver usbfs [ 4.094588] usbcore: registered new interface driver hub [ 4.100058] usbcore: registered new device driver usb [ 4.117963] xhci-mtk 1e1c0000.xhci: supply vbus not found, using dummy regulator [ 4.125645] xhci-mtk 1e1c0000.xhci: supply vusb33 not found, using dummy regulator [ 4.133526] xhci-mtk 1e1c0000.xhci: xHCI Host Controller [ 4.138918] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1 [ 4.157757] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000290010 [ 4.166945] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000 [ 4.174125] hub 1-0:1.0: USB hub found [ 4.178140] hub 1-0:1.0: 2 ports detected [ 4.182870] xhci-mtk 1e1c0000.xhci: xHCI Host Controller [ 4.188372] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2 [ 4.195854] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed [ 4.202514] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 4.211674] hub 2-0:1.0: USB hub found [ 4.215565] hub 2-0:1.0: 1 port detected [ 4.228215] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 4.248011] init: - preinit - [ 5.814178] random: jshn: uninitialized urandom read (4 bytes read) [ 6.021883] random: jshn: uninitialized urandom read (4 bytes read) [ 6.067999] random: jshn: uninitialized urandom read (4 bytes read) [ 6.359395] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode [ 6.367823] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 6.376743] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode [ 6.383696] 8021q: adding VLAN 0 to HW filter on device lan1 [ 6.392458] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 8.033935] mt7530 mdio-bus:1f lan1: Link is Up - 100Mbps/Full - flow control off [ 8.041507] IPv6: ADDRCONF(NETDEV_CHANGE): lan1: link becomes ready [ 10.886911] jffs2: notice: (567) jffs2_build_xattr_subsystem: complete building xattr subsystem, 38 of xdatum (36 unchecked, 2 orphan) and 56 of xref (2 dead, 0 orphan) found. [ 10.909540] mount_root: switching to jffs2 overlay [ 10.929716] overlayfs: upper fs does not support tmpfile. [ 10.966776] urandom-seed: Seeding with /etc/urandom.seed [ 11.318566] mt7530 mdio-bus:1f lan1: Link is Down [ 11.340603] procd: - early - [ 11.343745] procd: - watchdog - [ 11.817594] random: crng init done [ 11.821018] random: 7 urandom warning(s) missed due to ratelimiting [ 12.027764] procd: - watchdog - [ 12.031623] procd: - ubus - [ 12.401741] procd: - init - [ 13.848778] kmodloader: loading kernel modules from /etc/modules.d/* [ 13.854811] urngd: v1.0.2 started. [ 14.055696] Loading modules backported from Linux version v5.15.81-0-ge4a7232c917c [ 14.063341] Backport generated by backports.git v5.15.81-1-0-ge1867d55 [ 14.115030] xt_time: kernel timezone is -0000 [ 14.502657] mt7621-pci 1e140000.pcie: bus=1 slot=0 irq=22 [ 14.508153] pci 0000:00:00.0: enabling device (0006 -> 0007) [ 14.513809] mt7603e 0000:01:00.0: enabling device (0000 -> 0002) [ 14.520006] mt7603e 0000:01:00.0: ASIC revision: 76030010 [ 15.558986] mt7603e 0000:01:00.0: Firmware Version: ap_pcie [ 15.564569] mt7603e 0000:01:00.0: Build Time: 20160107100755 [ 15.607547] mt7603e 0000:01:00.0: firmware init done [ 15.778301] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 15.792843] mt7621-pci 1e140000.pcie: bus=2 slot=1 irq=23 [ 15.798342] pci 0000:00:01.0: enabling device (0006 -> 0007) [ 15.804017] mt76x2e 0000:02:00.0: enabling device (0000 -> 0002) [ 15.810301] mt76x2e 0000:02:00.0: ASIC revision: 76120044 [ 16.822719] mt76x2e 0000:02:00.0: ROM patch build: 20141115060606a [ 16.833671] mt76x2e 0000:02:00.0: Firmware Version: 0.0.00 [ 16.839254] mt76x2e 0000:02:00.0: Build: 1 [ 16.843354] mt76x2e 0000:02:00.0: Build Time: 201607111443____ [ 16.867677] mt76x2e 0000:02:00.0: Firmware running! [ 16.874757] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 16.952990] PPP generic driver version 2.4.2 [ 16.959728] NET: Registered protocol family 24 [ 17.124175] batman_adv: B.A.T.M.A.N. advanced 2022.0-openwrt-5 (compatibility version 15) loaded [ 17.149142] kmodloader: done loading kernel modules from /etc/modules.d/* [ 26.206042] mtk_soc_eth 1e100000.ethernet eth0: Link is Down [ 26.221251] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode [ 26.229400] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx [ 26.238274] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 26.245962] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode [ 26.253143] 8021q: adding VLAN 0 to HW filter on device lan1 [ 26.262452] br-lan: port 1(lan1) entered blocking state [ 26.267884] br-lan: port 1(lan1) entered disabled state [ 26.274111] device lan1 entered promiscuous mode [ 26.279088] device eth0 entered promiscuous mode [ 26.307281] device br-lan entered promiscuous mode [ 26.329283] mt7530 mdio-bus:1f lan2: configuring for phy/gmii link mode [ 26.336583] 8021q: adding VLAN 0 to HW filter on device lan2 [ 26.347407] br-lan: port 2(lan2) entered blocking state [ 26.352742] br-lan: port 2(lan2) entered disabled state [ 26.359538] device lan2 entered promiscuous mode [ 26.377080] mt7530 mdio-bus:1f lan3: configuring for phy/gmii link mode [ 26.384323] 8021q: adding VLAN 0 to HW filter on device lan3 [ 26.393899] br-lan: port 3(lan3) entered blocking state [ 26.399327] br-lan: port 3(lan3) entered disabled state [ 26.406030] device lan3 entered promiscuous mode [ 26.423921] mt7530 mdio-bus:1f lan4: configuring for phy/gmii link mode [ 26.431200] 8021q: adding VLAN 0 to HW filter on device lan4 [ 26.441762] br-lan: port 4(lan4) entered blocking state [ 26.447022] br-lan: port 4(lan4) entered disabled state [ 26.453805] device lan4 entered promiscuous mode [ 26.503258] mt7530 mdio-bus:1f wan: configuring for phy/gmii link mode [ 26.510667] 8021q: adding VLAN 0 to HW filter on device wan [ 27.087930] 8021q: adding VLAN 0 to HW filter on device bat0 [ 27.464797] batman_adv: bat0: Adding interface: eth0_29 [ 27.470262] batman_adv: bat0: The MTU of interface eth0_29 is too small (1496) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem. [ 27.494765] batman_adv: bat0: Interface activated: eth0_29 [ 29.711745] br-lan: port 5(wlan0-ap) entered blocking state [ 29.717387] br-lan: port 5(wlan0-ap) entered disabled state [ 29.723904] device wlan0-ap entered promiscuous mode [ 29.769516] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-ap: link becomes ready [ 29.776679] br-lan: port 5(wlan0-ap) entered blocking state [ 29.782415] br-lan: port 5(wlan0-ap) entered forwarding state [ 29.799600] br-lan: port 6(wlan0-apname) entered blocking state [ 29.805621] br-lan: port 6(wlan0-apname) entered disabled state [ 29.812485] device wlan0-apname entered promiscuous mode [ 29.828011] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 29.847768] IPv6: ADDRCONF(NETDEV_CHANGE): anygw: link becomes ready [ 29.857218] br-lan: port 6(wlan0-apname) entered blocking state [ 29.863614] br-lan: port 6(wlan0-apname) entered forwarding state [ 29.896942] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-apname: link becomes ready [ 30.334280] br-lan: port 7(wlan1-ap) entered blocking state [ 30.339994] br-lan: port 7(wlan1-ap) entered disabled state [ 30.346315] device wlan1-ap entered promiscuous mode [ 30.351966] br-lan: port 7(wlan1-ap) entered blocking state [ 30.357887] br-lan: port 7(wlan1-ap) entered forwarding state [ 30.380841] mt7530 mdio-bus:1f lan1: Link is Up - 100Mbps/Full - flow control off [ 30.388885] br-lan: port 1(lan1) entered blocking state [ 30.394190] br-lan: port 1(lan1) entered forwarding state [ 30.707977] br-lan: port 7(wlan1-ap) entered disabled state [ 30.789093] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-ap: link becomes ready [ 30.796162] br-lan: port 7(wlan1-ap) entered blocking state [ 30.801902] br-lan: port 7(wlan1-ap) entered forwarding state [ 30.815789] br-lan: port 8(wlan1-apname) entered blocking state [ 30.821898] br-lan: port 8(wlan1-apname) entered disabled state [ 30.828664] device wlan1-apname entered promiscuous mode [ 30.838482] br-lan: port 8(wlan1-apname) entered blocking state [ 30.844498] br-lan: port 8(wlan1-apname) entered forwarding state [ 30.856258] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-apname: link becomes ready [ 31.450227] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0-mesh: link becomes ready [ 31.713821] device wlan0-mesh entered promiscuous mode [ 31.867623] batman_adv: bat0: Adding interface: wlan0-mesh_29 [ 31.873444] batman_adv: bat0: Interface activated: wlan0-mesh_29 [ 32.483665] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1-mesh: link becomes ready [ 32.759620] device wlan1-mesh entered promiscuous mode [ 32.957763] batman_adv: bat0: Adding interface: wlan1-mesh_29 [ 32.963642] batman_adv: bat0: Interface activated: wlan1-mesh_29 ### CMD batctl if eth0_29: active wlan0-mesh_29: active wlan1-mesh_29: active ### CMD batctl o [B.A.T.M.A.N. adv 2022.0-openwrt-5, MainIF/MAC: eth0_29/02:95:39:eb:7f:64 (bat0/52:23:31:df:ca:37 BATMAN_IV)] Originator last-seen (#/255) Nexthop [outgoingIF] ### CMD bmx6 -c show=status show=interfaces show=links show=originators show=tunnels /bin/lime-report: eval: line 13: bmx6: not found ### CMD bmx7 -c show=status show=interfaces show=links show=originators show=tunnels /bin/lime-report: eval: line 13: bmx7: not found ### CMD echo dump | nc ::1 30003 BABEL 1.0 version babeld-1.12.1-ubus-mod host LiMe-eb7f64 my-id d6:5f:25:ff:fe:eb:7f:64 ok add interface wlan0-mesh_17 up true ipv6 fe80::d65f:25ff:feeb:7f64 ipv4 10.13.127.100 add interface wlan1-mesh_17 up true ipv6 fe80::d65f:25ff:feeb:7f66 ipv4 10.13.127.100 add interface eth0_17 up true ipv6 fe80::d65f:25ff:feeb:7f64 ipv4 10.13.127.100 add xroute fd0d:fe46:8ce8::/64-::/0 prefix fd0d:fe46:8ce8::/64 from ::/0 metric 0 add xroute 10.13.0.0/16-0.0.0.0/0 prefix 10.13.0.0/16 from 0.0.0.0/0 metric 0 ok ### CMD free total used free shared buff/cache available Mem: 120536 26892 80896 80 12748 62616 Swap: 0 0 0 ### CMD ps PID USER VSZ STAT COMMAND 1 root 1688 S /sbin/procd 2 root 0 SW [kthreadd] 3 root 0 IW< [rcu_gp] 4 root 0 IW< [rcu_par_gp] 5 root 0 IW [kworker/0:0-eve] 6 root 0 IW< [kworker/0:0H-kb] 7 root 0 IW [kworker/u8:0-ev] 8 root 0 IW< [mm_percpu_wq] 9 root 0 SW [rcu_tasks_trace] 10 root 0 SW [ksoftirqd/0] 11 root 0 IW [rcu_sched] 12 root 0 SW [migration/0] 13 root 0 SW [cpuhp/0] 14 root 0 SW [cpuhp/1] 15 root 0 SW [migration/1] 16 root 0 SW [ksoftirqd/1] 17 root 0 IW [kworker/1:0-rcu] 18 root 0 IW< [kworker/1:0H-ev] 19 root 0 SW [cpuhp/2] 20 root 0 SW [migration/2] 21 root 0 SW [ksoftirqd/2] 22 root 0 IW [kworker/2:0-eve] 23 root 0 IW< [kworker/2:0H-kb] 24 root 0 SW [cpuhp/3] 25 root 0 SW [migration/3] 26 root 0 SW [ksoftirqd/3] 27 root 0 IW [kworker/3:0-eve] 28 root 0 IW< [kworker/3:0H-ev] 29 root 0 IW< [netns] 30 root 0 IW [kworker/u8:1-ev] 33 root 0 IW [kworker/u8:2-ph] 40 root 0 IW [kworker/3:1-eve] 44 root 0 IW [kworker/u8:3-ph] 50 root 0 IW [kworker/u8:4-ph] 53 root 0 IW [kworker/0:1] 178 root 0 SW [oom_reaper] 179 root 0 IW< [writeback] 180 root 0 SW [kcompactd0] 190 root 0 IW< [pencrypt_serial] 192 root 0 IW< [pdecrypt_serial] 195 root 0 IW [kworker/1:1-eve] 207 root 0 IW< [kblockd] 208 root 0 IW< [blkcg_punt_bio] 226 root 0 SW [watchdogd] 237 root 0 IW [kworker/2:1-eve] 240 root 0 IW< [kworker/3:1H-kb] 248 root 0 SW [kswapd0] 251 root 0 IW< [kthrotld] 284 root 0 SW [spi0] 344 root 0 IW [kworker/1:2-eve] 375 root 0 IW< [ipv6_addrconf] 376 root 0 IW [kworker/1:3-eve] 377 root 0 IW< [dsa_ordered] 378 root 0 IW< [kworker/1:1H-kb] 381 root 0 SW [irq/25-mt7530] 387 root 0 IW [kworker/2:2-eve] 434 root 0 IW [kworker/2:3-eve] 435 root 0 IW [kworker/2:4-eve] 436 root 0 IW [kworker/2:5-eve] 437 root 0 IW [kworker/2:6-mm_] 438 root 0 IW [kworker/2:7-eve] 439 root 0 IW< [kworker/0:1H-kb] 441 root 0 IW< [kworker/2:1H] 445 root 0 IW [kworker/3:2-ipv] 474 root 0 IW [kworker/0:2-rcu] 485 root 0 IW< [kworker/2:2H] 568 root 0 SWN [jffs2_gcd_mtd6] 624 ubus 1328 S /sbin/ubusd 625 root 1000 S /sbin/askfirst /usr/libexec/login.sh 660 root 1116 S /sbin/urngd 760 root 0 IW< [cfg80211] 777 root 0 IW< [kworker/0:2H] 781 root 0 SW [napi/phy0-7] 782 root 0 SW [napi/phy0-8] 790 root 0 SW [mt76-tx phy0] 818 root 0 SW [napi/phy1-9] 819 root 0 SW [napi/phy1-10] 820 root 0 IW< [kworker/3:2H] 879 root 0 SW [mt76-tx phy1] 929 root 0 IW< [bat_events] 1122 logd 1352 S /sbin/logd -S 64 1312 root 1216 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p 22 -K 300 -T 3 1416 root 2664 S {hostapd} /sbin/ujail -t 5 -n hostapd -U network -G network -C /etc/capabilities/wpad 1417 root 2664 S {wpa_supplicant} /sbin/ujail -t 5 -n wpa_supplicant -U network -G network -C /etc/cap 1419 network 4596 S /usr/sbin/hostapd -s -g /var/run/hostapd/global 1420 network 4408 S /usr/sbin/wpa_supplicant -n -s -g /var/run/wpa_supplicant/global 1481 root 1876 S /sbin/netifd 1540 root 1316 S /usr/sbin/crond -f -c /etc/crontabs -l 5 1864 root 1348 S /usr/sbin/babeld -I -c /etc/babeld.conf -c /var/etc/babeld.conf 2662 root 0 IW [kworker/3:3-mm_] 2933 root 2664 S {ntpd} /sbin/ujail -t 5 -n ntpd -U ntp -G ntp -C /etc/capabilities/ntpd.json -c -u -r 2971 ntp 1312 S /usr/sbin/ntpd -n -N -S /usr/sbin/ntpd-hotplug -p 0.openwrt.pool.ntp.org -p 1.openwrt 4956 root 1236 S /usr/sbin/dropbear -F -P /var/run/dropbear.1.pid -p 22 -K 300 -T 3 -2 9 4957 root 1316 S -ash 4968 root 1332 S {lime-report} /bin/sh /bin/lime-report 5051 root 1332 S {lime-report} /bin/sh /bin/lime-report 5054 root 1320 R ps ### CMD ip address show 1: lo: mtu 65536 qdisc noqueue state UNKNOWN qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1504 qdisc fq_codel state UP qlen 1000 link/ether d4:5f:25:eb:7f:64 brd ff:ff:ff:ff:ff:ff inet6 fe80::d65f:25ff:feeb:7f64/64 scope link valid_lft forever preferred_lft forever 3: wan@eth0: mtu 1500 qdisc noqueue state LOWERLAYERDOWN qlen 1000 link/ether d4:5f:25:eb:7f:65 brd ff:ff:ff:ff:ff:ff 4: lan1@eth0: mtu 1500 qdisc noqueue master br-lan state UP qlen 1000 link/ether d4:5f:25:eb:7f:64 brd ff:ff:ff:ff:ff:ff 5: lan2@eth0: mtu 1500 qdisc noqueue master br-lan state LOWERLAYERDOWN qlen 1000 link/ether d4:5f:25:eb:7f:64 brd ff:ff:ff:ff:ff:ff 6: lan3@eth0: mtu 1500 qdisc noqueue master br-lan state LOWERLAYERDOWN qlen 1000 link/ether d4:5f:25:eb:7f:64 brd ff:ff:ff:ff:ff:ff 7: lan4@eth0: mtu 1500 qdisc noqueue master br-lan state LOWERLAYERDOWN qlen 1000 link/ether d4:5f:25:eb:7f:64 brd ff:ff:ff:ff:ff:ff 10: br-lan: mtu 1500 qdisc noqueue state UP qlen 1000 link/ether d4:5f:25:eb:7f:64 brd ff:ff:ff:ff:ff:ff inet 10.13.127.100/16 brd 10.13.255.255 scope global br-lan valid_lft forever preferred_lft forever inet6 fd0d:fe46:8ce8::eb:7f64/64 scope global valid_lft forever preferred_lft forever inet6 fe80::d65f:25ff:feeb:7f64/64 scope link valid_lft forever preferred_lft forever 11: anygw@br-lan: mtu 1500 qdisc noqueue state UP qlen 1000 link/ether aa:aa:aa:0d:fe:aa brd ff:ff:ff:ff:ff:ff inet 10.13.0.1/16 brd 10.13.255.255 scope global anygw valid_lft forever preferred_lft forever inet6 fd0d:fe46:8ce8::1/64 scope global valid_lft forever preferred_lft forever inet6 fe80::a8aa:aaff:fe0d:feaa/64 scope link valid_lft forever preferred_lft forever 12: eth0_17@eth0: mtu 1496 qdisc noqueue state UP qlen 1000 link/ether d4:5f:25:eb:7f:64 brd ff:ff:ff:ff:ff:ff inet 10.13.127.100/32 brd 255.255.255.255 scope global eth0_17 valid_lft forever preferred_lft forever inet6 fe80::d65f:25ff:feeb:7f64/64 scope link valid_lft forever preferred_lft forever 14: bat0: mtu 1500 qdisc noqueue state UNKNOWN qlen 1000 link/ether 52:23:31:df:ca:37 brd ff:ff:ff:ff:ff:ff inet6 fe80::5023:31ff:fedf:ca37/64 scope link valid_lft forever preferred_lft forever 15: eth0_29@eth0: mtu 1496 qdisc noqueue master bat0 state UP qlen 1000 link/ether 02:95:39:eb:7f:64 brd ff:ff:ff:ff:ff:ff inet6 fe80::95:39ff:feeb:7f64/64 scope link valid_lft forever preferred_lft forever 16: wlan0-mesh: mtu 1536 qdisc noqueue state UP qlen 1000 link/ether d4:5f:25:eb:7f:64 brd ff:ff:ff:ff:ff:ff inet6 fe80::d65f:25ff:feeb:7f64/64 scope link valid_lft forever preferred_lft forever 17: wlan1-mesh: mtu 1536 qdisc noqueue state UP qlen 1000 link/ether d4:5f:25:eb:7f:66 brd ff:ff:ff:ff:ff:ff inet6 fe80::d65f:25ff:feeb:7f66/64 scope link valid_lft forever preferred_lft forever 18: wlan0-ap: mtu 1500 qdisc noqueue master br-lan state UP qlen 1000 link/ether d6:5f:25:eb:7f:64 brd ff:ff:ff:ff:ff:ff inet6 fe80::d45f:25ff:feeb:7f64/64 scope link valid_lft forever preferred_lft forever 19: wlan1-ap: mtu 1500 qdisc noqueue master br-lan state UP qlen 1000 link/ether d6:5f:25:eb:7f:66 brd ff:ff:ff:ff:ff:ff inet6 fe80::d45f:25ff:feeb:7f66/64 scope link valid_lft forever preferred_lft forever 20: wlan0-apname: mtu 1500 qdisc noqueue master br-lan state UP qlen 1000 link/ether d2:5f:25:eb:7f:64 brd ff:ff:ff:ff:ff:ff inet6 fe80::d05f:25ff:feeb:7f64/64 scope link valid_lft forever preferred_lft forever 21: wlan1-apname: mtu 1500 qdisc noqueue master br-lan state UP qlen 1000 link/ether d2:5f:25:eb:7f:66 brd ff:ff:ff:ff:ff:ff inet6 fe80::d05f:25ff:feeb:7f66/64 scope link valid_lft forever preferred_lft forever 22: wlan0-mesh_17@wlan0-mesh: mtu 1536 qdisc noqueue state UP qlen 1000 link/ether d4:5f:25:eb:7f:64 brd ff:ff:ff:ff:ff:ff inet 10.13.127.100/32 brd 255.255.255.255 scope global wlan0-mesh_17 valid_lft forever preferred_lft forever inet6 fe80::d65f:25ff:feeb:7f64/64 scope link valid_lft forever preferred_lft forever 23: wlan0-mesh_29@wlan0-mesh: mtu 1532 qdisc noqueue master bat0 state UP qlen 1000 link/ether 02:58:47:eb:7f:64 brd ff:ff:ff:ff:ff:ff inet6 fe80::58:47ff:feeb:7f64/64 scope link valid_lft forever preferred_lft forever 24: wlan1-mesh_17@wlan1-mesh: mtu 1536 qdisc noqueue state UP qlen 1000 link/ether d4:5f:25:eb:7f:66 brd ff:ff:ff:ff:ff:ff inet 10.13.127.100/32 brd 255.255.255.255 scope global wlan1-mesh_17 valid_lft forever preferred_lft forever inet6 fe80::d65f:25ff:feeb:7f66/64 scope link valid_lft forever preferred_lft forever 25: wlan1-mesh_29@wlan1-mesh: mtu 1532 qdisc noqueue master bat0 state UP qlen 1000 link/ether 02:ab:46:eb:7f:64 brd ff:ff:ff:ff:ff:ff inet6 fe80::ab:46ff:feeb:7f64/64 scope link valid_lft forever preferred_lft forever ### CMD ip route show 10.13.0.0/16 dev br-lan scope link src 10.13.127.100 10.13.0.0/16 dev anygw scope link src 10.13.0.1 ### CMD brctl show bridge name bridge id STP enabled interfaces br-lan 7fff.d45f25eb7f64 no lan4 wlan0-ap lan2 wlan1-apname wlan0-apname lan3 lan1 wlan1-ap ### CMD ip link show 1: lo: mtu 65536 qdisc noqueue state UNKNOWN qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: eth0: mtu 1504 qdisc fq_codel state UP qlen 1000 link/ether d4:5f:25:eb:7f:64 brd ff:ff:ff:ff:ff:ff 3: wan@eth0: mtu 1500 qdisc noqueue state LOWERLAYERDOWN qlen 1000 link/ether d4:5f:25:eb:7f:65 brd ff:ff:ff:ff:ff:ff 4: lan1@eth0: mtu 1500 qdisc noqueue master br-lan state UP qlen 1000 link/ether d4:5f:25:eb:7f:64 brd ff:ff:ff:ff:ff:ff 5: lan2@eth0: mtu 1500 qdisc noqueue master br-lan state LOWERLAYERDOWN qlen 1000 link/ether d4:5f:25:eb:7f:64 brd ff:ff:ff:ff:ff:ff 6: lan3@eth0: mtu 1500 qdisc noqueue master br-lan state LOWERLAYERDOWN qlen 1000 link/ether d4:5f:25:eb:7f:64 brd ff:ff:ff:ff:ff:ff 7: lan4@eth0: mtu 1500 qdisc noqueue master br-lan state LOWERLAYERDOWN qlen 1000 link/ether d4:5f:25:eb:7f:64 brd ff:ff:ff:ff:ff:ff 10: br-lan: mtu 1500 qdisc noqueue state UP qlen 1000 link/ether d4:5f:25:eb:7f:64 brd ff:ff:ff:ff:ff:ff 11: anygw@br-lan: mtu 1500 qdisc noqueue state UP qlen 1000 link/ether aa:aa:aa:0d:fe:aa brd ff:ff:ff:ff:ff:ff 12: eth0_17@eth0: mtu 1496 qdisc noqueue state UP qlen 1000 link/ether d4:5f:25:eb:7f:64 brd ff:ff:ff:ff:ff:ff 14: bat0: mtu 1500 qdisc noqueue state UNKNOWN qlen 1000 link/ether 52:23:31:df:ca:37 brd ff:ff:ff:ff:ff:ff 15: eth0_29@eth0: mtu 1496 qdisc noqueue master bat0 state UP qlen 1000 link/ether 02:95:39:eb:7f:64 brd ff:ff:ff:ff:ff:ff 16: wlan0-mesh: mtu 1536 qdisc noqueue state UP qlen 1000 link/ether d4:5f:25:eb:7f:64 brd ff:ff:ff:ff:ff:ff 17: wlan1-mesh: mtu 1536 qdisc noqueue state UP qlen 1000 link/ether d4:5f:25:eb:7f:66 brd ff:ff:ff:ff:ff:ff 18: wlan0-ap: mtu 1500 qdisc noqueue master br-lan state UP qlen 1000 link/ether d6:5f:25:eb:7f:64 brd ff:ff:ff:ff:ff:ff 19: wlan1-ap: mtu 1500 qdisc noqueue master br-lan state UP qlen 1000 link/ether d6:5f:25:eb:7f:66 brd ff:ff:ff:ff:ff:ff 20: wlan0-apname: mtu 1500 qdisc noqueue master br-lan state UP qlen 1000 link/ether d2:5f:25:eb:7f:64 brd ff:ff:ff:ff:ff:ff 21: wlan1-apname: mtu 1500 qdisc noqueue master br-lan state UP qlen 1000 link/ether d2:5f:25:eb:7f:66 brd ff:ff:ff:ff:ff:ff 22: wlan0-mesh_17@wlan0-mesh: mtu 1536 qdisc noqueue state UP qlen 1000 link/ether d4:5f:25:eb:7f:64 brd ff:ff:ff:ff:ff:ff 23: wlan0-mesh_29@wlan0-mesh: mtu 1532 qdisc noqueue master bat0 state UP qlen 1000 link/ether 02:58:47:eb:7f:64 brd ff:ff:ff:ff:ff:ff 24: wlan1-mesh_17@wlan1-mesh: mtu 1536 qdisc noqueue state UP qlen 1000 link/ether d4:5f:25:eb:7f:66 brd ff:ff:ff:ff:ff:ff 25: wlan1-mesh_29@wlan1-mesh: mtu 1532 qdisc noqueue master bat0 state UP qlen 1000 link/ether 02:ab:46:eb:7f:64 brd ff:ff:ff:ff:ff:ff ### CMD df Filesystem 1K-blocks Used Available Use% Mounted on /dev/root 3584 3584 0 100% /rom tmpfs 60268 136 60132 0% /tmp /dev/mtdblock6 9984 1120 8864 11% /overlay overlayfs:/overlay 9984 1120 8864 11% / tmpfs 512 0 512 0% /dev ### CMD logread -l 20 Wed Dec 7 17:40:25 2022 daemon.notice netifd: Interface 'lm_net_wlan1_mesh' is now up Wed Dec 7 17:40:25 2022 kern.info kernel: [ 32.759620] device wlan1-mesh entered promiscuous mode Wed Dec 7 17:40:25 2022 daemon.notice netifd: 8021ad 'wlan1-mesh_17' link is up Wed Dec 7 17:40:25 2022 daemon.notice netifd: Interface 'lm_net_wlan1_mesh_babeld_if' has link connectivity Wed Dec 7 17:40:25 2022 daemon.notice netifd: 8021ad 'wlan1-mesh_29' link is up Wed Dec 7 17:40:25 2022 daemon.notice netifd: Interface 'lm_net_wlan1_mesh_batadv_if' has link connectivity Wed Dec 7 17:40:25 2022 daemon.notice netifd: Interface 'lm_net_wlan1_mesh_batadv_if' is setting up now Wed Dec 7 17:40:25 2022 kern.info kernel: [ 32.957763] batman_adv: bat0: Adding interface: wlan1-mesh_29 Wed Dec 7 17:40:25 2022 kern.info kernel: [ 32.963642] batman_adv: bat0: Interface activated: wlan1-mesh_29 Wed Dec 7 17:40:25 2022 daemon.notice netifd: Interface 'lm_net_wlan1_mesh_batadv_if' is now up Wed Dec 7 17:40:25 2022 daemon.info procd: - init complete - Wed Dec 7 17:40:28 2022 daemon.crit dnsmasq[1]: cannot access directory /etc/dnsmasq.d: No such file or directory Wed Dec 7 17:40:28 2022 daemon.crit dnsmasq[1]: FAILED to start up Wed Dec 7 17:40:33 2022 daemon.crit dnsmasq[1]: cannot access directory /etc/dnsmasq.d: No such file or directory Wed Dec 7 17:40:33 2022 daemon.crit dnsmasq[1]: FAILED to start up Wed Dec 7 17:40:37 2022 authpriv.info dropbear[4956]: Child connection from fe80::381e:7b11:6da1:1db4%br-lan:40088 Wed Dec 7 17:40:38 2022 daemon.crit dnsmasq[1]: cannot access directory /etc/dnsmasq.d: No such file or directory Wed Dec 7 17:40:38 2022 daemon.crit dnsmasq[1]: FAILED to start up Wed Dec 7 17:40:38 2022 daemon.info procd: Instance dnsmasq::cfg01411c s in a crash loop 6 crashes, 0 seconds since last crash ### CMD iw dev wlan0-mesh station dump ### CMD iw dev wlan1-mesh station dump ### CMD iw dev wlan0-mesh mpath dump DEST ADDR NEXT HOP IFACE SN METRIC QLEN EXPTIME DTIM DRET FLAGS HOP_COUNT PATH_CHANGE ### CMD iw dev wlan1-mesh mpath dump DEST ADDR NEXT HOP IFACE SN METRIC QLEN EXPTIME DTIM DRET FLAGS HOP_COUNT PATH_CHANGE ### CMD iwinfo wlan0-ap ESSID: "LibreMesh.org" Access Point: D6:5F:25:EB:7F:64 Mode: Master Channel: 11 (2.462 GHz) Center Channel 1: 11 2: unknown Tx-Power: 20 dBm Link Quality: unknown/70 Signal: unknown Noise: unknown Bit Rate: unknown Encryption: none Type: nl80211 HW Mode(s): 802.11bgn Hardware: 14C3:7603 14C3:7603 [MediaTek MT7603E] TX power offset: none Frequency offset: none Supports VAPs: yes PHY name: phy0 wlan0-apname ESSID: "LibreMesh.org/LiMe-eb7f64" Access Point: D2:5F:25:EB:7F:64 Mode: Master Channel: 11 (2.462 GHz) Center Channel 1: 11 2: unknown Tx-Power: 20 dBm Link Quality: unknown/70 Signal: unknown Noise: unknown Bit Rate: unknown Encryption: none Type: nl80211 HW Mode(s): 802.11bgn Hardware: 14C3:7603 14C3:7603 [MediaTek MT7603E] TX power offset: none Frequency offset: none Supports VAPs: yes PHY name: phy0 wlan0-mesh ESSID: "LiMe" Access Point: D4:5F:25:EB:7F:64 Mode: Mesh Point Channel: 11 (2.462 GHz) Center Channel 1: 11 2: unknown Tx-Power: 20 dBm Link Quality: unknown/70 Signal: unknown Noise: unknown Bit Rate: unknown Encryption: none Type: nl80211 HW Mode(s): 802.11bgn Hardware: 14C3:7603 14C3:7603 [MediaTek MT7603E] TX power offset: none Frequency offset: none Supports VAPs: yes PHY name: phy0 wlan1-ap ESSID: "LibreMesh.org" Access Point: D6:5F:25:EB:7F:66 Mode: Master Channel: 48 (5.240 GHz) Center Channel 1: 46 2: unknown Tx-Power: 20 dBm Link Quality: unknown/70 Signal: unknown Noise: unknown Bit Rate: unknown Encryption: none Type: nl80211 HW Mode(s): 802.11nac Hardware: 14C3:7662 14C3:7662 [MediaTek MT76x2E] TX power offset: none Frequency offset: none Supports VAPs: yes PHY name: phy1 wlan1-apname ESSID: "LibreMesh.org/LiMe-eb7f64" Access Point: D2:5F:25:EB:7F:66 Mode: Master Channel: 48 (5.240 GHz) Center Channel 1: 46 2: unknown Tx-Power: 20 dBm Link Quality: unknown/70 Signal: unknown Noise: unknown Bit Rate: unknown Encryption: none Type: nl80211 HW Mode(s): 802.11nac Hardware: 14C3:7662 14C3:7662 [MediaTek MT76x2E] TX power offset: none Frequency offset: none Supports VAPs: yes PHY name: phy1 wlan1-mesh ESSID: "LiMe" Access Point: D4:5F:25:EB:7F:66 Mode: Mesh Point Channel: 48 (5.240 GHz) Center Channel 1: 46 2: unknown Tx-Power: 20 dBm Link Quality: unknown/70 Signal: unknown Noise: unknown Bit Rate: unknown Encryption: none Type: nl80211 HW Mode(s): 802.11nac Hardware: 14C3:7662 14C3:7662 [MediaTek MT76x2E] TX power offset: none Frequency offset: none Supports VAPs: yes PHY name: phy1 ### CMD wifi status { "radio0": { "up": true, "pending": false, "autostart": true, "disabled": false, "retry_setup_failed": false, "config": { "path": "1e140000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0", "band": "2g", "htmode": "HT20", "distance": "100", "noscan": "1", "noscan": true, "channel": "11", "disabled": false }, "interfaces": [ { "section": "lm_wlan0_ap_radio0", "ifname": "wlan0-ap", "config": { "mode": "ap", "ifname": "wlan0-ap", "ssid": "LibreMesh.org", "mode": "ap", "network": [ "lan" ] }, "vlans": [ ], "stations": [ ] }, { "section": "lm_wlan0_apname_radio0", "ifname": "wlan0-apname", "config": { "mode": "ap", "ifname": "wlan0-apname", "ssid": "LibreMesh.org/LiMe-eb7f64", "mode": "ap", "network": [ "lan" ] }, "vlans": [ ], "stations": [ ] }, { "section": "lm_wlan0_mesh_radio0", "ifname": "wlan0-mesh", "config": { "mode": "mesh", "ifname": "wlan0-mesh", "mcast_rate": 24000, "mesh_fwding": false, "mesh_id": "LiMe", "mode": "mesh", "network": [ "lm_net_wlan0_mesh" ] }, "vlans": [ ], "stations": [ ] } ] }, "radio1": { "up": true, "pending": false, "autostart": true, "disabled": false, "retry_setup_failed": false, "config": { "path": "1e140000.pcie/pci0000:00/0000:00:01.0/0000:02:00.0", "band": "5g", "distance": "1000", "noscan": "1", "noscan": true, "channel": "48", "htmode": "HT40", "disabled": false }, "interfaces": [ { "section": "lm_wlan1_ap_radio1", "ifname": "wlan1-ap", "config": { "mode": "ap", "ifname": "wlan1-ap", "ssid": "LibreMesh.org", "mode": "ap", "network": [ "lan" ] }, "vlans": [ ], "stations": [ ] }, { "section": "lm_wlan1_apname_radio1", "ifname": "wlan1-apname", "config": { "mode": "ap", "ifname": "wlan1-apname", "ssid": "LibreMesh.org/LiMe-eb7f64", "mode": "ap", "network": [ "lan" ] }, "vlans": [ ], "stations": [ ] }, { "section": "lm_wlan1_mesh_radio1", "ifname": "wlan1-mesh", "config": { "mode": "mesh", "ifname": "wlan1-mesh", "mcast_rate": 6000, "mesh_fwding": false, "mesh_id": "LiMe", "mode": "mesh", "network": [ "lm_net_wlan1_mesh" ] }, "vlans": [ ], "stations": [ ] } ] } } ### CMD swconfig dev switch0 show /bin/lime-report: eval: line 13: swconfig: not found ### CMD iptables -vnL -t filter /bin/lime-report: eval: line 13: iptables: not found ### CMD iptables -vnL -t nat /bin/lime-report: eval: line 13: iptables: not found ### CMD iptables -vnL -t mangle /bin/lime-report: eval: line 13: iptables: not found ### CMD ebtables -t filter -L --Lc Bridge table: filter Bridge chain: INPUT, entries: 0, policy: ACCEPT Bridge chain: FORWARD, entries: 0, policy: ACCEPT Bridge chain: OUTPUT, entries: 0, policy: ACCEPT ### CMD ebtables -t nat -L --Lc Bridge table: nat Bridge chain: PREROUTING, entries: 0, policy: ACCEPT Bridge chain: OUTPUT, entries: 0, policy: ACCEPT Bridge chain: POSTROUTING, entries: 0, policy: ACCEPT ### CMD ebtables -t broute -L --Lc Bridge table: broute Bridge chain: BROUTING, entries: 0, policy: ACCEPT ### CMD opkg list-installed babeld - 1.12.1-2 base-files - 1496-r19958-309a6f22ba batctl-default - 2022.0-3 busybox - 1.35.0-5 ca-bundle - 20211016-1 dnsmasq-dhcpv6 - 2.86-15 dropbear - 2022.82-2 ebtables-legacy - 2018-06-27-48cff25d-1 firewall4 - 2022-10-18-7ae5e14b-1 fstools - 2022-06-02-93369be0-2 fwtool - 2019-11-12-8f7fe925-1 getrandom - 2021-08-03-205defb5-2 hostapd-common - 2022-01-16-cff80b4f-14.1 iputils-ping - 20211215-1 iw - 5.16-1 iwinfo - 2022-08-19-0dad3e66-1 jansson4 - 2.13.1-2 jshn - 2022-05-15-d2223ef9-1 jsonfilter - 2018-02-04-c7e938d6-1 kernel - 5.10.156-1-e7215eddf0772b940dda40f5713c3475 kmod-batman-adv - 5.10.156+2022.0-5 kmod-cfg80211 - 5.10.156+5.15.81-1-1 kmod-crypto-aead - 5.10.156-1 kmod-crypto-ccm - 5.10.156-1 kmod-crypto-cmac - 5.10.156-1 kmod-crypto-crc32c - 5.10.156-1 kmod-crypto-ctr - 5.10.156-1 kmod-crypto-gcm - 5.10.156-1 kmod-crypto-gf128 - 5.10.156-1 kmod-crypto-ghash - 5.10.156-1 kmod-crypto-hash - 5.10.156-1 kmod-crypto-hmac - 5.10.156-1 kmod-crypto-manager - 5.10.156-1 kmod-crypto-md5 - 5.10.156-1 kmod-crypto-null - 5.10.156-1 kmod-crypto-rng - 5.10.156-1 kmod-crypto-seqiv - 5.10.156-1 kmod-crypto-sha256 - 5.10.156-1 kmod-ebtables - 5.10.156-1 kmod-ebtables-ipv6 - 5.10.156-1 kmod-gpio-button-hotplug - 5.10.156-3 kmod-ipt-core - 5.10.156-1 kmod-leds-gpio - 5.10.156-1 kmod-lib-crc-ccitt - 5.10.156-1 kmod-lib-crc16 - 5.10.156-1 kmod-lib-crc32c - 5.10.156-1 kmod-mac80211 - 5.10.156+5.15.81-1-1 kmod-macvlan - 5.10.156-1 kmod-mt76-core - 5.10.156+2022-09-06-d7054646-5 kmod-mt7603 - 5.10.156+2022-09-06-d7054646-5 kmod-mt76x02-common - 5.10.156+2022-09-06-d7054646-5 kmod-mt76x2 - 5.10.156+2022-09-06-d7054646-5 kmod-mt76x2-common - 5.10.156+2022-09-06-d7054646-5 kmod-nf-conntrack - 5.10.156-1 kmod-nf-conntrack6 - 5.10.156-1 kmod-nf-flow - 5.10.156-1 kmod-nf-ipt - 5.10.156-1 kmod-nf-log - 5.10.156-1 kmod-nf-log6 - 5.10.156-1 kmod-nf-nat - 5.10.156-1 kmod-nf-reject - 5.10.156-1 kmod-nf-reject6 - 5.10.156-1 kmod-nfnetlink - 5.10.156-1 kmod-nft-core - 5.10.156-1 kmod-nft-fib - 5.10.156-1 kmod-nft-nat - 5.10.156-1 kmod-nft-offload - 5.10.156-1 kmod-nls-base - 5.10.156-1 kmod-ppp - 5.10.156-1 kmod-pppoe - 5.10.156-1 kmod-pppox - 5.10.156-1 kmod-slhc - 5.10.156-1 kmod-usb-core - 5.10.156-1 kmod-usb-ledtrig-usbport - 5.10.156-1 kmod-usb-xhci-hcd - 5.10.156-1 kmod-usb-xhci-mtk - 5.10.156-1 kmod-usb3 - 5.10.156-1 libblobmsg-json20220515 - 2022-05-15-d2223ef9-1 libc - 1.2.3-4 libgcc1 - 11.2.0-4 libiwinfo-data - 2022-08-19-0dad3e66-1 libiwinfo-lua - 2022-08-19-0dad3e66-1 libiwinfo20210430 - 2022-08-19-0dad3e66-1 libjson-c5 - 0.15-2 libjson-script20220515 - 2022-05-15-d2223ef9-1 liblua5.1.5 - 5.1.5-10 libmnl0 - 1.0.5-1 libnftnl11 - 1.2.1-2 libnl-tiny1 - 2021-11-21-8e0555fb-1 libpthread - 1.2.3-4 librt - 1.2.3-4 libubox20220515 - 2022-05-15-d2223ef9-1 libubus20220601 - 2022-06-01-2bebf93c-1 libuci-lua - 2021-10-22-f84f49f0-6 libuci20130104 - 2021-10-22-f84f49f0-6 libuclient20201210 - 2021-05-14-6a6011df-1 libucode20220812 - 2022-10-18-00af0650-1 libustream-wolfssl20201210 - 2022-01-16-868fd881-2 libwolfssl5.5.3.ee39414e - 5.5.3-stable-1 lime-proto-anygw - 2022-12-06-1670352231 lime-proto-babeld - git-22.341.63207-7c40b80 lime-proto-batadv - git-22.341.63207-7c40b80 lime-report - 2022-12-06-1670352231 lime-system - 2022-12-06-1670352231 logd - 2021-08-03-205defb5-2 lua - 5.1.5-10 luci-lib-ip - git-20.250.76529-62505bd luci-lib-jsonc - git-22.097.61921-7513345 luci-lib-nixio - git-20.234.06894-c4a4e43 mtd - 26 netifd - 2022-08-25-76d2d41b-1 nftables-json - 1.0.2-2.1 odhcp6c - 2022-08-05-7d21e8d8-18 opkg - 2022-02-24-d038e5b6-1 ppp - 2.4.9.git-2021-01-04-3 ppp-mod-pppoe - 2.4.9.git-2021-01-04-3 procd - 2022-06-01-7a009685-2 procd-seccomp - 2022-06-01-7a009685-2 procd-ujail - 2022-06-01-7a009685-2 shared-state - 2022-12-06-1670352231 shared-state-dnsmasq_hosts - 2022-12-06-1670352231 shared-state-dnsmasq_leases - 2022-12-06-1670352231 ubi-utils - 2.1.4-1 ubox - 2021-08-03-205defb5-2 ubus - 2022-06-01-2bebf93c-1 ubusd - 2022-06-01-2bebf93c-1 uci - 2021-10-22-f84f49f0-6 uclient-fetch - 2021-05-14-6a6011df-1 ucode - 2022-10-18-00af0650-1 ucode-mod-fs - 2022-10-18-00af0650-1 ucode-mod-ubus - 2022-10-18-00af0650-1 ucode-mod-uci - 2022-10-18-00af0650-1 urandom-seed - 3 urngd - 2020-01-21-c7f7b6b6-1 usign - 2020-05-23-f1f65026-1 wireless-regdb - 2022.08.12-1 wpad-basic-wolfssl - 2022-01-16-cff80b4f-14.1