[ 0.000000] Linux version 4.11.12-rt14 (vudiq@helsinki) (gcc version 6.2.0 (GCC) ) #1 SMP PREEMPT RT Fri Feb 23 22:06:00 CET 2018 [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffbffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007ffc0000-0x000000007ffcffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007ffd0000-0x000000007fffffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ff780000-0x00000000ffffffff] reserved [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] SMBIOS 2.3 present. [ 0.000000] DMI: System manufacturer System Product Name/P4S800-MX SE, BIOS 1009.002 10/20/2006 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7ffc0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- UC [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] initial memory mapped: [mem 0x00000000-0x023fffff] [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384 [ 0.000000] BRK [0x02197000, 0x02197fff] PGTABLE [ 0.000000] 1159MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] BRK [0x02198000, 0x02198fff] PGTABLE [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] Normal [mem 0x0000000001000000-0x00000000377fdfff] [ 0.000000] HighMem [mem 0x00000000377fe000-0x000000007ffbffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007ffbffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffbffff] [ 0.000000] On node 0 totalpages: 524126 [ 0.000000] free_area_init_node: node 0, pgdat c1ea1e00, node_mem_map f67fe020 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 223230 pages, LIFO batch:31 [ 0.000000] HighMem zone: 296898 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] MPTABLE: OEM ID: SiS [ 0.000000] MPTABLE: Product ID: [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] Processors: 1 [ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] e820: [mem 0x80000000-0xff77ffff] available for PCI devices [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] percpu: Embedded 21 pages/cpu @f67e6000 s56544 r0 d29472 u86016 [ 0.000000] pcpu-alloc: s56544 r0 d29472 u86016 alloc=21*4096 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522350 [ 0.000000] Kernel command line: root=/dev/ram0 rdinit=/init usbcore.autosuspend=-1 BOOT_IMAGE=/KERNEL boot=UUID=2302-3240 disk=UUID=149d9cfe-b52b-4064-bc67-c41da71ea221 portable nomodeset quiet vt.global_cursor_default=0 loglevel=2 acpi=off tty retroarch=0 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000377fe:0007ffc0) [ 0.000000] Initializing Movable for node 0 (00000000:00000000) [ 0.000000] Memory: 2060620K/2096504K available (10542K kernel code, 613K rwdata, 3844K rodata, 2572K init, 344K bss, 35884K reserved, 0K cma-reserved, 1187592K highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc1eab000 - 0xc212e000 (2572 kB) [ 0.000000] .data : 0xc1a4b873 - 0xc1ea9400 (4470 kB) [ 0.000000] .text : 0xc1000000 - 0xc1a4b873 (10542 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 32. [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1 [ 0.000000] NR_IRQS:2304 nr_irqs:256 16 [ 0.000000] CPU 0 irqstacks, hard=f600c000 soft=f600e000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.001000] tsc: Detected 3520.085 MHz processor [ 0.001000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7040.17 BogoMIPS (lpj=3520085) [ 0.001000] pid_max: default: 32768 minimum: 301 [ 0.001000] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001000] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002067] CPU: Physical Processor ID: 0 [ 0.002067] CPU: Processor Core ID: 0 [ 0.002076] process: using mwait in idle threads [ 0.002089] Last level iTLB entries: 4KB 64, 2MB 64, 4MB 64 [ 0.002089] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64, 1GB 0 [ 0.013326] Freeing SMP alternatives memory: 36K [ 0.013469] smpboot: Max logical packages: 1 [ 0.013482] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.013522] ExtINT not setup in hardware but reported by MP table [ 0.013796] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.125000] smpboot: CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz (family: 0xf, model: 0x3, stepping: 0x4) [ 0.128018] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.128032] ... version: 0 [ 0.128033] ... bit width: 40 [ 0.128034] ... generic registers: 18 [ 0.128035] ... value mask: 000000ffffffffff [ 0.128036] ... max period: 0000007fffffffff [ 0.128037] ... fixed-purpose events: 0 [ 0.128038] ... event mask: 000000000003ffff [ 0.140043] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.142008] smp: Bringing up secondary CPUs ... [ 0.142010] smp: Brought up 1 node, 1 CPU [ 0.142012] smpboot: Total of 1 processors activated (7040.17 BogoMIPS) [ 0.142544] sched_clock: Marking stable (142000000, 0)->(243311852, -101311852) [ 0.142823] devtmpfs: initialized [ 0.143848] PM: Registering ACPI NVS region [mem 0x7ffd0000-0x7fffffff] (196608 bytes) [ 0.143863] reboot: ASUS P4S800 series board detected. Selecting BIOS-method for reboots. [ 0.143944] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.143951] futex hash table entries: 256 (order: 2, 16384 bytes) [ 0.143993] pinctrl core: initialized pinctrl subsystem [ 0.144197] NET: Registered protocol family 16 [ 0.145021] cpuidle: using governor ladder [ 0.145030] cpuidle: using governor menu [ 0.149936] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 [ 0.149937] PCI: Using configuration type 1 for base access [ 0.160030] ACPI: Interpreter disabled. [ 0.160101] vgaarb: loaded [ 0.160198] SCSI subsystem initialized [ 0.161023] libata version 3.00 loaded. [ 0.161098] usbcore: registered new interface driver usbfs [ 0.161115] usbcore: registered new interface driver hub [ 0.161129] usbcore: registered new device driver usb [ 0.161174] pps_core: LinuxPPS API ver. 1 registered [ 0.161175] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.161180] PTP clock support registered [ 0.161250] Advanced Linux Sound Architecture Driver Initialized. [ 0.161251] PCI: Probing PCI hardware [ 0.161253] PCI: root bus 00: using default resources [ 0.161255] PCI: Probing PCI hardware (bus 00) [ 0.161297] PCI host bridge to bus 0000:00 [ 0.161303] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.161306] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff] [ 0.161308] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.161327] pci 0000:00:00.0: [1039:0661] type 00 class 0x060000 [ 0.161340] pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xe3ffffff] [ 0.161462] pci 0000:00:01.0: [1039:0003] type 01 class 0x060400 [ 0.161548] pci 0000:00:02.0: [1039:0964] type 00 class 0x060100 [ 0.161680] pci 0000:00:02.5: [1039:5513] type 00 class 0x01018a [ 0.161705] pci 0000:00:02.5: reg 0x10: [io 0x0000-0x0007] [ 0.161714] pci 0000:00:02.5: reg 0x14: [io 0x0000-0x0003] [ 0.161723] pci 0000:00:02.5: reg 0x18: [io 0x0000-0x0007] [ 0.161732] pci 0000:00:02.5: reg 0x1c: [io 0x0000-0x0003] [ 0.161742] pci 0000:00:02.5: reg 0x20: [io 0xffa0-0xffaf] [ 0.161762] pci 0000:00:02.5: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.161764] pci 0000:00:02.5: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.161765] pci 0000:00:02.5: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.161767] pci 0000:00:02.5: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.161794] pci 0000:00:02.5: PME# supported from D3cold [ 0.161865] pci 0000:00:02.7: [1039:7012] type 00 class 0x040100 [ 0.161882] pci 0000:00:02.7: reg 0x10: [io 0xd800-0xd8ff] [ 0.161892] pci 0000:00:02.7: reg 0x14: [io 0xd400-0xd47f] [ 0.161959] pci 0000:00:02.7: supports D1 D2 [ 0.161961] pci 0000:00:02.7: PME# supported from D3hot D3cold [ 0.162044] pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310 [ 0.162058] pci 0000:00:03.0: reg 0x10: [mem 0xcfefc000-0xcfefcfff] [ 0.162168] pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310 [ 0.162183] pci 0000:00:03.1: reg 0x10: [mem 0xcfefd000-0xcfefdfff] [ 0.162290] pci 0000:00:03.2: [1039:7001] type 00 class 0x0c0310 [ 0.162305] pci 0000:00:03.2: reg 0x10: [mem 0xcfefe000-0xcfefefff] [ 0.162417] pci 0000:00:03.3: [1039:7002] type 00 class 0x0c0320 [ 0.162433] pci 0000:00:03.3: reg 0x10: [mem 0xcfeff000-0xcfefffff] [ 0.162503] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold [ 0.162578] pci 0000:00:04.0: [1039:0900] type 00 class 0x020000 [ 0.162594] pci 0000:00:04.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.162603] pci 0000:00:04.0: reg 0x14: [mem 0xcfefb000-0xcfefbfff] [ 0.162642] pci 0000:00:04.0: reg 0x30: [mem 0xcfec0000-0xcfedffff pref] [ 0.162670] pci 0000:00:04.0: supports D1 D2 [ 0.162672] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.162741] pci 0000:00:05.0: [1039:0181] type 00 class 0x010185 [ 0.162756] pci 0000:00:05.0: reg 0x10: [io 0xc800-0xc807] [ 0.162765] pci 0000:00:05.0: reg 0x14: [io 0xc400-0xc403] [ 0.162774] pci 0000:00:05.0: reg 0x18: [io 0xc000-0xc007] [ 0.162783] pci 0000:00:05.0: reg 0x1c: [io 0xb800-0xb803] [ 0.162792] pci 0000:00:05.0: reg 0x20: [io 0xb400-0xb40f] [ 0.162801] pci 0000:00:05.0: reg 0x24: [io 0xb000-0xb07f] [ 0.162836] pci 0000:00:05.0: PME# supported from D3cold [ 0.162909] pci 0000:00:08.0: [1814:0201] type 00 class 0x028000 [ 0.162925] pci 0000:00:08.0: reg 0x10: [mem 0xcfef8000-0xcfef9fff] [ 0.163064] pci 0000:00:0a.0: [10b9:5459] type 00 class 0x070300 [ 0.163081] pci 0000:00:0a.0: reg 0x10: [mem 0xcfefa000-0xcfefafff] [ 0.163090] pci 0000:00:0a.0: reg 0x14: [io 0xa800-0xa8ff] [ 0.163155] pci 0000:00:0a.0: PME# supported from D3hot D3cold [ 0.163290] pci 0000:01:00.0: [1002:9495] type 00 class 0x030000 [ 0.163308] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref] [ 0.163318] pci 0000:01:00.0: reg 0x14: [io 0xe000-0xe0ff] [ 0.163327] pci 0000:01:00.0: reg 0x18: [mem 0xcfff0000-0xcfffffff] [ 0.163359] pci 0000:01:00.0: reg 0x30: [mem 0xcffc0000-0xcffdffff pref] [ 0.163399] pci 0000:01:00.0: supports D1 D2 [ 0.163446] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 0.163450] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.163489] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.163493] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.163497] pci 0000:00:01.0: bridge window [mem 0xcff00000-0xcfffffff] [ 0.163501] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref] [ 0.163510] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01 [ 0.163557] pci 0000:00:02.0: SIS IRQ router [1039:0964] [ 0.163566] PCI: pci_cache_line_size set to 64 bytes [ 0.163613] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.163615] e820: reserve RAM buffer [mem 0x7ffc0000-0x7fffffff] [ 0.164202] clocksource: Switched to clocksource refined-jiffies [ 0.164298] FS-Cache: Loaded [ 0.164346] pnp: PnP ACPI: disabled [ 0.166971] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.166976] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.166981] pci 0000:00:01.0: bridge window [mem 0xcff00000-0xcfffffff] [ 0.166985] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff pref] [ 0.166993] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.167005] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff] [ 0.167008] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.167009] pci_bus 0000:01: resource 1 [mem 0xcff00000-0xcfffffff] [ 0.167011] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff pref] [ 0.167046] NET: Registered protocol family 2 [ 0.167256] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.167286] TCP bind hash table entries: 8192 (order: 5, 229376 bytes) [ 0.167453] TCP: Hash tables configured (established 8192 bind 8192) [ 0.167521] UDP hash table entries: 512 (order: 3, 32768 bytes) [ 0.167548] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes) [ 0.167657] NET: Registered protocol family 1 [ 0.171041] RPC: Registered named UNIX socket transport module. [ 0.171043] RPC: Registered udp transport module. [ 0.171044] RPC: Registered tcp transport module. [ 0.171045] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.171094] pci 0000:00:03.0: PCI->APIC IRQ transform: INT A -> IRQ 20 [ 0.245000] pci 0000:00:03.1: PCI->APIC IRQ transform: INT B -> IRQ 21 [ 0.318979] pci 0000:00:03.2: PCI->APIC IRQ transform: INT C -> IRQ 22 [ 0.392961] pci 0000:00:03.3: PCI->APIC IRQ transform: INT D -> IRQ 23 [ 0.393004] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.393008] PCI: CLS 64 bytes, default 64 [ 0.447021] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.447174] Scanning for low memory corruption every 60 seconds [ 0.447731] workingset: timestamp_bits=30 max_order=19 bucket_order=0 [ 0.451335] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.453079] NFS: Registering the id_resolver key type [ 0.453091] Key type id_resolver registered [ 0.453092] Key type id_legacy registered [ 0.453098] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.456937] FS-Cache: Netfs 'cifs' registered for caching [ 0.461527] bounce: pool size: 64 pages [ 0.461553] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 0.461557] io scheduler noop registered [ 0.461612] io scheduler cfq registered (default) [ 0.461613] io scheduler mq-deadline registered [ 0.463055] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.483517] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.483880] serial 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 0.484656] 0000:00:0a.0: ttyS1 at I/O 0xa828 (irq = 18, base_baud = 115200) is a 8250 [ 0.485061] 0000:00:0a.0: ttyS2 at I/O 0xa840 (irq = 18, base_baud = 115200) is a 8250 [ 0.485323] 0000:00:0a.0: ttyS3 at I/O 0xa850 (irq = 18, base_baud = 115200) is a 8250 [ 0.485383] serial 0000:00:0a.0: Couldn't register serial port a858, irq 18, type 0, error -28 [ 0.485439] Linux agpgart interface v0.103 [ 0.485556] [drm] VGACON disable radeon kernel modesetting. [ 0.485566] [drm:radeon_init] *ERROR* No UMS support in radeon module! [ 0.485579] [drm:amdgpu_init] *ERROR* VGACON disables amdgpu kernel modesetting. [ 0.519632] brd: module loaded [ 0.519673] loop: module loaded [ 0.553317] usbcore: registered new interface driver rtsx_usb [ 0.553351] Loading iSCSI transport class v2.0-870. [ 0.554979] iscsi: registered transport (tcp) [ 0.555262] sata_sis 0000:00:05.0: version 1.0 [ 0.555290] sata_sis 0000:00:05.0: PCI->APIC IRQ transform: INT A -> IRQ 17 [ 0.555298] sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode [ 0.556909] scsi host0: sata_sis [ 0.558907] scsi host1: sata_sis [ 0.558976] ata1: SATA max UDMA/133 cmd 0xc800 ctl 0xc400 bmdma 0xb400 irq 17 [ 0.558978] ata2: SATA max UDMA/133 cmd 0xc000 ctl 0xb800 bmdma 0xb408 irq 17 [ 0.559181] pata_sis 0000:00:02.5: version 0.5.2 [ 0.559191] pata_sis 0000:00:02.5: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 0.559283] pata_sis 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller [ 0.560920] scsi host2: pata_sis [ 0.562906] scsi host3: pata_sis [ 0.562968] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.562970] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.563409] tun: Universal TUN/TAP device driver, 1.6 [ 0.563538] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 0.563581] Atheros(R) L2 Ethernet Driver - version 2.2.3 [ 0.563582] Copyright (c) 2007 Atheros Corporation. [ 0.563713] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015) [ 0.564937] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29) [ 0.564967] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 0.564968] e100: Copyright(c) 1999-2006 Intel Corporation [ 0.564991] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 0.564992] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 0.565021] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 0.565022] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 0.565047] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 0.565048] igb: Copyright (c) 2007-2014 Intel Corporation. [ 0.565072] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 0.565117] sky2: driver version 1.30 [ 0.565267] sis900.c: v1.08.10 Apr. 2 2006 [ 0.565279] sis900 0000:00:04.0: PCI->APIC IRQ transform: INT A -> IRQ 19 [ 0.566355] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1. [ 0.575799] 0000:00:04.0: Using transceiver found at address 1 as default [ 0.576617] eth0: SiS 900 PCI Fast Ethernet at 0x0001d000, IRQ 19, 00:13:d4:5d:cd:5f [ 0.576711] PPP generic driver version 2.4.2 [ 0.576789] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.576791] ehci-pci: EHCI PCI platform driver [ 0.576821] ehci-pci 0000:00:03.3: PCI->APIC IRQ transform: INT D -> IRQ 23 [ 0.576864] ehci-pci 0000:00:03.3: EHCI Host Controller [ 0.576876] ehci-pci 0000:00:03.3: new USB bus registered, assigned bus number 1 [ 0.576934] ehci-pci 0000:00:03.3: cache line size of 64 is not supported [ 0.576981] ehci-pci 0000:00:03.3: irq 23, io mem 0xcfeff000 [ 0.583901] ehci-pci 0000:00:03.3: USB 2.0 started, EHCI 1.00 [ 0.584161] hub 1-0:1.0: USB hub found [ 0.584173] hub 1-0:1.0: 8 ports detected [ 0.584460] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.584470] ohci-pci: OHCI PCI platform driver [ 0.584496] ohci-pci 0000:00:03.0: PCI->APIC IRQ transform: INT A -> IRQ 20 [ 0.584513] ohci-pci 0000:00:03.0: OHCI PCI host controller [ 0.584521] ohci-pci 0000:00:03.0: new USB bus registered, assigned bus number 2 [ 0.584589] ohci-pci 0000:00:03.0: irq 20, io mem 0xcfefc000 [ 0.638097] hub 2-0:1.0: USB hub found [ 0.638107] hub 2-0:1.0: 3 ports detected [ 0.638274] ohci-pci 0000:00:03.1: PCI->APIC IRQ transform: INT B -> IRQ 21 [ 0.638291] ohci-pci 0000:00:03.1: OHCI PCI host controller [ 0.638298] ohci-pci 0000:00:03.1: new USB bus registered, assigned bus number 3 [ 0.638351] ohci-pci 0000:00:03.1: irq 21, io mem 0xcfefd000 [ 0.692136] hub 3-0:1.0: USB hub found [ 0.692146] hub 3-0:1.0: 3 ports detected [ 0.692303] ohci-pci 0000:00:03.2: PCI->APIC IRQ transform: INT C -> IRQ 22 [ 0.692320] ohci-pci 0000:00:03.2: OHCI PCI host controller [ 0.692326] ohci-pci 0000:00:03.2: new USB bus registered, assigned bus number 4 [ 0.692383] ohci-pci 0000:00:03.2: irq 22, io mem 0xcfefe000 [ 0.729234] ata3.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133 [ 0.729236] ata3.00: 160086528 sectors, multi 16: LBA [ 0.729432] ata3.01: ATA-7: Hitachi HDS721680PLAT80, P21OA60A, max UDMA/133 [ 0.729434] ata3.01: 160836480 sectors, multi 16: LBA48 [ 0.735218] ata3.00: configured for UDMA/133 [ 0.741253] ata3.01: configured for UDMA/133 [ 0.746077] hub 4-0:1.0: USB hub found [ 0.746086] hub 4-0:1.0: 2 ports detected [ 0.746230] uhci_hcd: USB Universal Host Controller Interface driver [ 0.746309] usbcore: registered new interface driver uas [ 0.746353] usbcore: registered new interface driver usb-storage [ 0.746388] i8042: PNP: No PS/2 controller found. [ 0.746389] i8042: Probing ports directly. [ 0.746916] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.746922] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.747076] mousedev: PS/2 mouse device common for all mice [ 0.747268] usbcore: registered new interface driver iforce [ 0.747426] usbcore: registered new interface driver xpad [ 0.747713] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 0.747762] rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram [ 0.747784] i2c /dev entries driver [ 0.747952] w83627ehf: Found W83627EHG chip at 0x290 [ 0.748248] w83627ehf w83627ehf.656: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 0.748294] sdhci: Secure Digital Host Controller Interface driver [ 0.748295] sdhci: Copyright(c) Pierre Ossman [ 0.748328] No iBFT detected. [ 0.748352] hidraw: raw HID events driver (C) Jiri Kosina [ 0.749111] usbcore: registered new interface driver usbhid [ 0.749112] usbhid: USB HID core driver [ 0.749484] NET: Registered protocol family 10 [ 0.751068] Segment Routing with IPv6 [ 0.751093] NET: Registered protocol family 17 [ 0.751127] Key type dns_resolver registered [ 0.751560] microcode: sig=0xf34, pf=0x4, revision=0x17 [ 0.751624] microcode: Microcode Update Driver: v2.2. [ 0.751633] Using IPI No-Shortcut mode [ 0.752081] console [netcon0] enabled [ 0.752082] netconsole: network logging started [ 0.752113] rtc_cmos rtc_cmos: setting system clock to 2018-02-24 00:53:23 UTC (1519433603) [ 0.752153] p4_clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available [ 0.752197] ALSA device list: [ 0.752198] No soundcards found. [ 0.864867] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.885131] ata1.00: ATA-7: SAMSUNG SP2004C, VM100-50, max UDMA7 [ 0.885134] ata1.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 0.898826] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.925106] ata1.00: configured for UDMA/133 [ 0.926928] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SP2004C 0-50 PQ: 0 ANSI: 5 [ 0.927239] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.927423] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB) [ 0.927440] sd 0:0:0:0: [sda] Write Protect is off [ 0.927443] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.927469] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.937340] sda: sda1 sda2 [ 0.937719] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.018037] usb-storage 1-1:1.0: USB Mass Storage device detected [ 1.019824] scsi host4: usb-storage 1-1:1.0 [ 1.243524] ata2: SATA link down (SStatus 0 SControl 300) [ 1.255821] scsi 2:0:0:0: Direct-Access ATA Maxtor 6Y080L0 1BW0 PQ: 0 ANSI: 5 [ 1.256156] sd 2:0:0:0: [sdb] 160086528 512-byte logical blocks: (82.0 GB/76.3 GiB) [ 1.256171] sd 2:0:0:0: [sdb] Write Protect is off [ 1.256173] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.256199] sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 1.256479] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.267537] sdb: sdb1 sdb2 sdb3 [ 1.267616] scsi 2:0:1:0: Direct-Access ATA Hitachi HDS72168 A60A PQ: 0 ANSI: 5 [ 1.268048] sd 2:0:1:0: [sdc] 160836480 512-byte logical blocks: (82.3 GB/76.7 GiB) [ 1.268063] sd 2:0:1:0: [sdc] Write Protect is off [ 1.268064] sd 2:0:1:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.268089] sd 2:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.268432] sd 2:0:1:0: Attached scsi generic sg2 type 0 [ 1.283258] sd 2:0:0:0: [sdb] Attached SCSI disk [ 1.283275] sdc: sdc1 sdc2 [ 1.283626] sd 2:0:1:0: [sdc] Attached SCSI disk [ 1.291733] usb 3-1: new low-speed USB device number 2 using ohci-pci [ 1.429949] Freeing unused kernel memory: 2572K [ 1.430105] Write protecting the kernel text: 10544k [ 1.430300] Write protecting the kernel read-only data: 3856k [ 1.466762] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32bd6ec702d, max_idle_ns: 440795256424 ns [ 1.466789] clocksource: Switched to clocksource tsc [ 1.523087] input: USB Keyboard as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.0/0003:04D9:1503.0001/input/input3 [ 1.574955] hid-generic 0003:04D9:1503.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Keyboard] on usb-0000:00:03.1-1/input0 [ 1.599926] input: USB Keyboard as /devices/pci0000:00/0000:00:03.1/usb3/3-1/3-1:1.1/0003:04D9:1503.0002/input/input4 [ 1.651856] hid-generic 0003:04D9:1503.0002: input,hidraw1: USB HID v1.10 Device [ USB Keyboard] on usb-0000:00:03.1-1/input1 [ 2.045463] scsi 4:0:0:0: Direct-Access SanDisk Cruzer Pop 1.26 PQ: 0 ANSI: 5 [ 2.048902] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 2.049815] sd 4:0:0:0: [sdd] 15633408 512-byte logical blocks: (8.00 GB/7.45 GiB) [ 2.051304] sd 4:0:0:0: [sdd] Write Protect is off [ 2.051306] sd 4:0:0:0: [sdd] Mode Sense: 43 00 00 00 [ 2.052322] sd 4:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 2.068873] sdd: sdd1 sdd2 [ 2.070559] usb 4-2: new full-speed USB device number 2 using ohci-pci [ 2.072068] sd 4:0:0:0: [sdd] Attached SCSI removable disk [ 2.289007] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:03.2/usb4/4-2/4-2:1.0/input/input5 [ 2.730392] usb 1-7: new high-speed USB device number 5 using ehci-pci [ 2.787676] uvesafb: [ 2.787682] (C) 1988-2005, ATI Technologies Inc. , [ 2.787683] RV730, [ 2.787684] 01.00, [ 2.787685] OEM: ATI ATOMBIOS, [ 2.787686] VBE v3.0 [ 2.851324] usb-storage 1-7:1.0: USB Mass Storage device detected [ 2.859354] scsi host5: usb-storage 1-7:1.0 [ 2.862472] uvesafb: protected mode interface info at c000:a1f6 [ 2.862475] uvesafb: pmi: set display start = c00ca298, set palette = c00ca356 [ 2.862573] uvesafb: VBIOS/hardware supports DDC2 transfers [ 3.138008] uvesafb: monitor limits: vf = 75 Hz, hf = 80 kHz, clk = 140 MHz [ 3.138175] uvesafb: scrolling: ypan using protected mode interface, yres_virtual=13107 [ 3.146242] uvesafb: mode switch failed (eax=0x34f, err=0). Trying again with default timings. [ 3.811879] uvesafb: mode switch failed (eax=0x34f, err=0). Trying again with default timings. [ 3.902731] scsi 5:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0 [ 3.907591] scsi 5:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0 [ 3.912586] scsi 5:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0 [ 3.917586] scsi 5:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0 [ 3.922418] sd 5:0:0:0: Attached scsi generic sg4 type 0 [ 3.922673] sd 5:0:0:1: Attached scsi generic sg5 type 0 [ 3.922968] sd 5:0:0:2: Attached scsi generic sg6 type 0 [ 3.923468] sd 5:0:0:3: Attached scsi generic sg7 type 0 [ 3.928334] sd 5:0:0:0: [sde] Attached SCSI removable disk [ 3.929709] sd 5:0:0:1: [sdf] Attached SCSI removable disk [ 3.930458] sd 5:0:0:2: [sdg] Attached SCSI removable disk [ 3.931085] sd 5:0:0:3: [sdh] Attached SCSI removable disk [ 4.449342] Console: switching to colour frame buffer device 80x30 [ 4.449455] uvesafb: mode switch failed (eax=0x34f, err=0). Trying again with default timings. [ 5.082900] uvesafb: framebuffer at 0xd0000000, mapped to 0xf8400000, using 16384k, total 16384k [ 5.082901] fb0: VESA VGA frame buffer device [ 6.022271] EXT4-fs (sdd2): couldn't mount as ext3 due to feature incompatibilities [ 6.023358] EXT4-fs (sdd2): couldn't mount as ext2 due to feature incompatibilities [ 6.075633] EXT4-fs (sdd2): mounted filesystem with ordered data mode. Opts: (null) [ 21.454996] ### BIG FAT WARNING [ 21.455023] ### sdd2 is removable. suspend/resume may not work [ 21.456930] ### BIG FAT WARNING [ 21.456954] ### sdd1 is removable. suspend/resume may not work [ 21.569972] systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN) [ 21.570203] systemd[1]: Detected architecture x86. [ 21.570355] systemd[1]: Running with unpopulated /etc. [ 21.570429] systemd[1]: Set hostname to . [ 21.570469] systemd[1]: Cannot open /etc/machine-id: No such file or directory [ 21.598992] systemd[1]: Populated /etc with preset unit settings. [ 21.629972] systemd[1]: Listening on Journal Socket (/dev/log). [ 21.630274] systemd[1]: Created slice System Slice. [ 21.631015] systemd[1]: Mounting Variable Directory... [ 21.631173] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 21.921507] systemd-journald[248]: Received request to flush runtime journal from PID 1 [ 23.020103] snd_intel8x0 0000:00:02.7: PCI->APIC IRQ transform: INT C -> IRQ 18 [ 23.414418] snd_intel8x0 0000:00:02.7: intel8x0_measure_ac97_clock: measured 51089 usecs (2458 samples) [ 23.414425] snd_intel8x0 0000:00:02.7: clocking to 48000 [ 23.661158] rt2500pci 0000:00:08.0: PCI->APIC IRQ transform: INT A -> IRQ 19 [ 23.670803] 8021q: 802.1Q VLAN Support v1.8 [ 23.709544] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2560, rf: 0003, rev: 0004 [ 23.711365] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 24.053035] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null) [ 24.079905] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null) [ 24.115352] fuse init (API version 7.26) [ 24.168210] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 24.693384] eth0: Media Link Off [ 24.901505] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null) [ 24.918710] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null) [ 30.197837] eth0: Media Link On 100mbps full-duplex