Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with
or
.
Download ZIP
Fetching contributors…

Cannot retrieve contributors at this time

140 lines (122 sloc) 4.058 kB
/* LibTomMath, multiple-precision integer library -- Tom St Denis
*
* LibTomMath is a library that provides multiple-precision
* integer arithmetic as well as number theoretic functionality.
*
* The library was designed directly after the MPI library by
* Michael Fromberger but has been written from scratch with
* additional optimizations in place.
*
* The library is free for all purposes without any express
* guarantee it works.
*
* Tom St Denis, tomstdenis@iahu.ca, http://math.libtomcrypt.org
*/
#include <tommath.h>
/* fast squaring
*
* This is the comba method where the columns of the product
* are computed first then the carries are computed. This
* has the effect of making a very simple inner loop that
* is executed the most
*
* W2 represents the outer products and W the inner.
*
* A further optimizations is made because the inner
* products are of the form "A * B * 2". The *2 part does
* not need to be computed until the end which is good
* because 64-bit shifts are slow!
*
* Based on Algorithm 14.16 on pp.597 of HAC.
*
*/
int fast_s_mp_sqr (mp_int * a, mp_int * b)
{
int olduse, newused, res, ix, pa;
mp_word W2[MP_WARRAY], W[MP_WARRAY];
/* calculate size of product and allocate as required */
pa = a->used;
newused = pa + pa + 1;
if (b->alloc < newused) {
if ((res = mp_grow (b, newused)) != MP_OKAY) {
return res;
}
}
/* zero temp buffer (columns)
* Note that there are two buffers. Since squaring requires
* a outer and inner product and the inner product requires
* computing a product and doubling it (a relatively expensive
* op to perform n**2 times if you don't have to) the inner and
* outer products are computed in different buffers. This way
* the inner product can be doubled using n doublings instead of
* n**2
*/
memset (W, 0, newused * sizeof (mp_word));
memset (W2, 0, newused * sizeof (mp_word));
/* This computes the inner product. To simplify the inner N**2 loop
* the multiplication by two is done afterwards in the N loop.
*/
for (ix = 0; ix < pa; ix++) {
/* compute the outer product
*
* Note that every outer product is computed
* for a particular column only once which means that
* there is no need todo a double precision addition
* into the W2[] array.
*/
W2[ix + ix] = ((mp_word)a->dp[ix]) * ((mp_word)a->dp[ix]);
{
register mp_digit tmpx, *tmpy;
register mp_word *_W;
register int iy;
/* copy of left side */
tmpx = a->dp[ix];
/* alias for right side */
tmpy = a->dp + (ix + 1);
/* the column to store the result in */
_W = W + (ix + ix + 1);
/* inner products */
for (iy = ix + 1; iy < pa; iy++) {
*_W++ += ((mp_word)tmpx) * ((mp_word)*tmpy++);
}
}
}
/* setup dest */
olduse = b->used;
b->used = newused;
/* now compute digits
*
* We have to double the inner product sums, add in the
* outer product sums, propagate carries and convert
* to single precision.
*/
{
register mp_digit *tmpb;
/* double first value, since the inner products are
* half of what they should be
*/
W[0] += W[0] + W2[0];
tmpb = b->dp;
for (ix = 1; ix < newused; ix++) {
/* double/add next digit */
W[ix] += W[ix] + W2[ix];
/* propagate carry forwards [from the previous digit] */
W[ix] = W[ix] + (W[ix - 1] >> ((mp_word) DIGIT_BIT));
/* store the current digit now that the carry isn't
* needed
*/
*tmpb++ = (mp_digit) (W[ix - 1] & ((mp_word) MP_MASK));
}
/* set the last value. Note even if the carry is zero
* this is required since the next step will not zero
* it if b originally had a value at b->dp[2*a.used]
*/
*tmpb++ = (mp_digit) (W[(newused) - 1] & ((mp_word) MP_MASK));
/* clear high digits of b if there were any originally */
for (; ix < olduse; ix++) {
*tmpb++ = 0;
}
}
mp_clamp (b);
return MP_OKAY;
}
Jump to Line
Something went wrong with that request. Please try again.