ngCNC

Plans for a Successor of the PrismCNC

Statics

• Base Plate Composite
  • Stainless Steel Plates
  • Aluminum Honeycombs with Frame
• Legs / Feet
• Screws:
  • ?x M5
  • ?x M6
• Washers:
  • ?x M5
  • ?x M6
• Nuts:
  • ?x M5
  • ?x M6
  • ?x M6 Hammer Head
• Aluminum Extrusion Profiles:
  • ?x 3030
  • 2x 640mm 30150
• ?x Connection Plates
• ?x Corners
• Acrylic / Perspex Box (Fish Tank?)
  • With Doors / Hatches
• Metal Box for Electronics
• Lamps / Lights

Robotics

• 3 Axis Linear Guide (Workspace: 650mm x 400mm x 250mm)
  • 1000mm x 600mm x 450mm Linear Guide
  • 2x FUB16H
  • 4x Dust Cover Bellows (Inner: 110x160, Outer: 170x220, Lengths: 2x 450, 2x 280)
  • 2x Drag Chain (15x20x1000)
  • Drag Chain (15x30x1000)
  • 3x NEMA23 6.35mm Stepper Motors
  • 3x NEMA23 Mount
• Angular Axis

Milling

• ER11 500W Spindle Motor, Clamp, Driver, Transformer
• Tool Length
• ER11 Collets
• Coolant Spray
• Air Pump / Compressor
• 4x Quick Fixture Clamp
• Switchable Magnets

Electronics

• 5x Motor Drivers
• Laser Light Barrier
• 10x Limit Switch SN04-N 6-36V
• 10x 4 channel logic level converter
• Opamp for spindle motor driver
• 11x Resistors of ratio ~2.7 e.g: 300k, 100k+10k
• 5x 6pin, 1x 3pin Plugs
• Wires / Cables / Tubes
• Red emergency stop button
• Arduino Due for realtime control
• Raspery PI 3 to host the web interface
• Power Supply 400W 12V 33A
• IEC 60320 (C14) with Fuse and Switch

Software

• Movement Control
• Web Interface
  • Remote Control
  • Upload G-Code