Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with
or
.
Download ZIP
Fetching contributors…

Cannot retrieve contributors at this time

115 lines (90 sloc) 3.576 kB
[Main]
# font which is used to display the osd
# you can get the available fonts for your machine from xfontsel
# i prefer this one - but it is not available everywhere
# Font=-*-lucida-*-r-*-*-24-*-*-*-*-*-iso8859-15
Font=-*-*-*-*-*-*-24-*-*-*-*-*-*-*
# how long should a message be displayed
Timeout=5
# how many lines should be displayed
Lines=20
# maximum length of a line
Linelen=60
# colour of the osd text. look into your XFree86 rgb.txt for others
Colour=yellow
# colour of osd status change messages
ControlColour=grey
# HPos is the horizontal position of the OSD
# valid values are left, right, center
HPos=left
# VPos is the vertical position of the OSD
# valid values are top, bottom, middle
VPos=bottom
# HOffset is the horizontal offset (=distance from left/right) of the OSD
# use this to displace the OSD on the second screen in multiscreen environments
HOffset=0
# VOffset is the vertical offset (=distance from top/bottom) of the OSD
VOffset=90
# when a message arrives before the previous one has timeouted -
# should we wait ?
# do only use 0 or 1. (true/false, on/off, ... do NOT work)
Wait=1
# show messages of users ?
# 0=don't show
# 1=show all
# 2=show messages of Online notify users
# 3=show only information that a message has been sent (like in sim)
# 4=show only information that a message has been sent (like in sim), only for Online notify users
Showmessages=1
# show logon/off of users ?
# 0=don't show
# 1=show all
# 2=show logon/off of Online notify users
Showlogon=0
# how long after our logon or logoff should no message be displayed
# this is some sort of a hack:
# when we logon we get all the users who are online at the moment
# as an logon event. Usually you don't want to show all of them in a row
# (especially when wait = true), but only the ones who log on / off while
# you are online.
# note that this timeout is used when the plugin is loaded AFTER logon
# (via plugin manager). This is a side effect of this hack.
# set this to 0 if you want to get the logon messages on startup too
Quiettimeout=10
# offset for shadow, 0 equals no shadow
ShadowOffset=0
# offset for outline, 0 equals no outline
OutlineOffset=2
# colour for shadow. look into your XFree86 rgb.txt for others
ShadowColour=black
# colour for outline. look into your XFree86 rgb.txt for others
OutlineColour=black
# show status change of users?
# 0 = no
# 1 = all users
# 2 = only for online notify users
ShowStatusChange=0
# this is an extra delay per character of the message.
# by using this you can achieve, that long messages are displayed
# longer than short ones
# The delay is specified in milliseconds, though only full seconds
# will take effect
# example: if DELAYPERCHARACTER is 200, then a message with 12 characters
# will be displayed for DISPLAYTIMEOUT+2 seconds
# (-->200*12 / 1000(1second) = 2.4, 0.4 ignored)
DelayPerCharacter=100
# show an osd message whenever a user checks your auto response
# 0=don't show
# 1=show all
# 2=show autoresponse check of Online notify users
ShowAutoResponseCheck=0
# messages which are sent via a secure connection will me marked with
# a (S)
MarkSecureMessages=0
# If this option is enabled, then the osd messages will only be shown
# if _you_ are in one of those stati.
# As long as this is commented out, the messages will _always_ be displayed
#ShowInModes = Online,FreeForChat,Away,NA,Occupied,DND,Invisible
# If ShowInModes specifies to not show anything, you might like to show
# messages (not status changes or so) in some more modes, so specify it here
#ShowMsgsInModes = DND
Jump to Line
Something went wrong with that request. Please try again.