[ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.4.90+ (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-11ubuntu1) ) #7 SMP PREEMPT Wed Jul 6 16:29:32 EDT 2016 [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine: sun7i [ 0.000000] Memory Reserved: [ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB) [ 0.000000] VE : 0x44000000 - 0x4fffffff ( 192 MB) [ 0.000000] G2D : 0x50000000 - 0x50ffffff ( 16 MB) [ 0.000000] LCD : 0x51000000 - 0x54ffffff ( 64 MB) [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] sunxi: Allwinner A20 (AW1651/sun7i) detected. [ 0.000000] On node 0 totalpages: 262144 [ 0.000000] free_area_init_node: node 0, pgdat c0a781c0, node_mem_map d5000000 [ 0.000000] DMA zone: 512 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 65024 pages, LIFO batch:15 [ 0.000000] Normal zone: 1008 pages used for memmap [ 0.000000] Normal zone: 128016 pages, LIFO batch:31 [ 0.000000] HighMem zone: 528 pages used for memmap [ 0.000000] HighMem zone: 67056 pages, LIFO batch:15 [ 0.000000] PERCPU: Embedded 7 pages/cpu @d5808000 s7616 r8192 d12864 u32768 [ 0.000000] pcpu-alloc: s7616 r8192 d12864 u32768 alloc=8*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096 [ 0.000000] Kernel command line: console=ttyS0,115200 vt.global_cursor_default=0 disp.screen0_output_mode=EDID:1280x720p60 hdmi.audio=1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait sunxi_ve_mem_reserve=192 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] allocated 2097152 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 1024MB = 1024MB total [ 0.000000] Memory: 746252k/746252k available, 302324k reserved, 270336K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc07f10ec (8101 kB) [ 0.000000] .init : 0xc07f2000 - 0xc0a11dc0 (2176 kB) [ 0.000000] .data : 0xc0a12000 - 0xc0a7f190 ( 437 kB) [ 0.000000] .bss : 0xc0a7f1b4 - 0xc0c4da98 (1851 kB) [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] NR_IRQS:192 [ 0.000000] Architected local timer running at 24.00MHz. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms [ 0.000000] start_kernel(): bug: interrupts were enabled early [ 0.000000] Console: colour dummy device 80x30 [ 0.010889] Calibrating delay loop... 1915.28 BogoMIPS (lpj=9576448) [ 0.076015] pid_max: default: 32768 minimum: 301 [ 0.079683] Mount-cache hash table entries: 512 [ 0.083923] Initializing cgroup subsys cpuacct [ 0.087240] Initializing cgroup subsys memory [ 0.090663] Initializing cgroup subsys devices [ 0.094103] Initializing cgroup subsys freezer [ 0.097328] Initializing cgroup subsys blkio [ 0.101003] Initializing cgroup subsys perf_event [ 0.104580] CPU: Testing write buffer coherency: ok [ 0.109780] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.116885] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available [ 0.122429] Setting up static identity map for 0x405820a0 - 0x405820f8 [ 0.238463] CPU1: Booted secondary processor [ 0.297346] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.299351] Brought up 2 CPUs [ 0.304660] SMP: Total of 2 processors activated (3837.13 BogoMIPS). [ 0.307827] devtmpfs: initialized [ 0.313242] dummy: [ 0.316915] NET: Registered protocol family 16 [ 0.323193] DMA: preallocated 256 KiB pool for atomic coherent allocations [ 0.330884] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.335701] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.338856] [ccu-inf] aw clock manager init [ 0.341126] [ccu-inf] aw_ccu_init [ 0.345092] [ccu-inf] script config pll3 to 297MHz [ 0.348844] [ccu-inf] script config pll4 to 300MHz [ 0.352592] [ccu-inf] script config pll6 to 600MHz [ 0.356354] [ccu-inf] script config pll7 to 297MHz [ 0.360101] [ccu-inf] script config pll8 to 336MHz [ 0.362846] Init eGon pin module V2.0 [ 0.371029] bio: create slab at 0 [ 0.374453] sunxi_gpio driver init ver 1.3 [ 0.380741] gpiochip_add: registered GPIOs 1 to 84 on device: A1X_GPIO [ 0.383873] SCSI subsystem initialized [ 0.386714] libata version 3.00 loaded. [ 0.391385] usbcore: registered new interface driver usbfs [ 0.395704] usbcore: registered new interface driver hub [ 0.399878] usbcore: registered new device driver usb [ 0.403001] Linux media interface: v0.10 [ 0.406605] Linux video capture interface: v2.00 [ 0.412140] Advanced Linux Sound Architecture Driver Version 1.0.25. [ 0.418307] cfg80211: Calling CRDA to update world regulatory domain [ 0.422816] Switching to clocksource arch_sys_counter [ 0.424937] FS-Cache: Loaded [ 0.427120] CacheFiles: Loaded [ 0.460420] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver [ 0.467129] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1 [ 0.470548] hub 1-0:1.0: USB hub found [ 0.473442] hub 1-0:1.0: 1 port detected [ 0.477999] NET: Registered protocol family 2 [ 0.484338] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.491302] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.498739] TCP bind hash table entries: 65536 (order: 7, 786432 bytes) [ 0.505333] TCP: Hash tables configured (established 131072 bind 65536) [ 0.507541] TCP: reno registered [ 0.512418] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.517753] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.521404] NET: Registered protocol family 1 [ 0.526697] RPC: Registered named UNIX socket transport module. [ 0.530396] RPC: Registered udp transport module. [ 0.534053] RPC: Registered tcp transport module. [ 0.539457] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.545021] audit: initializing netlink socket (disabled) [ 0.548779] type=2000 audit(0.530:1): initialized [ 0.553109] highmem bounce pool size: 64 pages [ 0.564480] VFS: Disk quotas dquot_6.5.2 [ 0.570066] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.576696] NFS: Registering the id_resolver key type [ 0.581419] NTFS driver 2.1.30 [Flags: R/W]. [ 0.584730] fuse init (API version 7.18) [ 0.588104] msgmni has been set to 929 [ 0.598687] alg: comp: Compression test 1 failed for lzo-generic: output len = 57 [ 0.601975] alg: No test for stdrng (krng) [ 0.608651] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.611592] io scheduler noop registered [ 0.615684] io scheduler deadline registered (default) [ 0.618525] io scheduler cfq registered [ 0.623331] sunxi disp driver loaded (/dev/disp api 1.0) [ 0.628880] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.633301] [uart]: used uart info.: 0xc1 [ 0.638043] [uart]: serial probe 0 irq 33 mapbase 0x01c28000 [ 0.664329] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A [ 1.303285] console [ttyS0] enabled [ 1.311666] [uart]: serial probe 6 irq 51 mapbase 0x01c29800 [ 1.343580] sunxi-uart.6: ttyS1 at MMIO 0x1c29800 (irq = 51) is a U6_16550A [ 1.355362] [uart]: serial probe 7 irq 52 mapbase 0x01c29c00 [ 1.387226] sunxi-uart.7: ttyS2 at MMIO 0x1c29c00 (irq = 52) is a U6_16550A [ 1.396680] G2D: drv_g2d_init [ 1.401380] G2D: g2dmem: g2d_start=50000000, g2d_size=1000000 [ 1.410364] G2D: head:d0000000,tail:d1000000 [ 1.417980] G2D: Module initialized.major:250 [ 1.425369] brd: module loaded [ 1.433876] loop: module loaded [ 1.440406] [NAND] nand driver version: 0x2 0x9 [ 1.483994] Dev Sunxi softw311 nand magic does not match for MBR 1: softw411 [ 1.497062] Dev Sunxi softw311 nand magic does not match for MBR 2: [ 1.510115] Dev Sunxi softw311 nand magic does not match for MBR 3: [ 1.523160] Dev Sunxi softw311 nand magic does not match for MBR 4: [ 1.537934] Dev Sunxi softw311 nand header bad for all MBR copies, MBR corrupted or not present. [ 1.556083] Dev Sunxi softw411 nand: part 1, start 32768, size 2048 [ 1.567517] Dev Sunxi softw411 nand: part 2, start 34816, size 512 [ 1.579177] Dev Sunxi softw411 nand: part 3, start 35328, size 7747072 [ 1.588231] nand: nanda nandb nandc [ 1.594809] [NAND]nand driver, ok. [ 1.601186] sw_ahci sw_ahci.0: controller can't do PMP, turning off CAP_PMP [ 1.612439] sw_ahci sw_ahci.0: forcing PORTS_IMPL to 0x1 [ 1.625187] sw_ahci sw_ahci.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode [ 1.640089] sw_ahci sw_ahci.0: flags: ncq sntf pm led clo only pio slum part ccc [ 1.650864] scsi0 : sw_ahci_platform [ 1.661642] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 [ 1.673109] PPP generic driver version 2.4.2 [ 1.681275] PPP BSD Compression module registered [ 1.689988] PPP Deflate Compression module registered [ 1.699902] PPP MPPE Compression module registered [ 1.708125] NET: Registered protocol family 24 [ 1.718594] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.730333] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.738919] [sw-ehci1]: open clock [ 1.761628] [sw-ehci1]: Set USB Power ON [ 1.768066] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.781752] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2 [ 1.793200] sw-ehci sw-ehci.1: irq 71, io mem 0x01c14000 [ 1.817270] sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00 [ 1.825986] hub 2-0:1.0: USB hub found [ 1.832631] hub 2-0:1.0: 1 port detected [ 1.839130] [sw-ohci1]: open clock [ 1.865290] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 1.878661] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3 [ 1.890020] sw-ohci sw-ohci.1: irq 96, io mem 0x01c14400 [ 1.960170] hub 3-0:1.0: USB hub found [ 1.966836] hub 3-0:1.0: 1 port detected [ 1.973305] [sw-ehci2]: open clock [ 1.996006] [sw-ehci2]: Set USB Power ON [ 2.002440] sw-ehci sw-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.016108] sw-ehci sw-ehci.2: new USB bus registered, assigned bus number 4 [ 2.020462] ata1: SATA link down (SStatus 0 SControl 300) [ 2.037312] sw-ehci sw-ehci.2: irq 72, io mem 0x01c1c000 [ 2.057304] sw-ehci sw-ehci.2: USB 2.0 started, EHCI 1.00 [ 2.066088] hub 4-0:1.0: USB hub found [ 2.072720] hub 4-0:1.0: 1 port detected [ 2.079243] [sw-ohci2]: open clock [ 2.105407] sw-ohci sw-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver [ 2.118763] sw-ohci sw-ohci.2: new USB bus registered, assigned bus number 5 [ 2.130118] sw-ohci sw-ohci.2: irq 97, io mem 0x01c1c400 [ 2.200216] hub 5-0:1.0: USB hub found [ 2.206888] hub 5-0:1.0: 1 port detected [ 2.215835] mousedev: PS/2 mouse device common for all mice [ 2.226990] ===========================hv_keypad_init===================== [ 2.230401] ========HV Inital =================== [ 2.234322] tkey_fetch_sysconfig_para: tkey_unused. [ 2.246505] hv_keypad_init: after fetch_sysconfig_para: normal_i2c: 0x0. normal_i2c[1]: 0x0 [ 2.248063] rtp_used == 1. [ 2.251809] sun4i-ts: tp_press_threshold_enable is 0. [ 2.255121] sun4i-ts: rtp_sensitive_level is 15. [ 2.258534] sun4i-ts: rtp_exchange_x_y_flag is 0. [ 2.264354] input: sun4i-ts as /devices/platform/sun4i-ts/input/input0 [ 2.276742] sunxi-rtc sunxi-rtc: Error: Set LOSC to external failed. [ 2.288167] sunxi-rtc sunxi-rtc: Warning: RTC time will be wrong! [ 2.299553] sunxi-rtc sunxi-rtc: rtc core: registered rtc as rtc0 [ 2.308213] i2c /dev entries driver [ 2.315383] config i2c gpio with gpio_config api [ 2.320998] axp_mfd 0-0034: AXP (CHIP ID: 0x41) detected [ 2.330717] i2c i2c-0: Invalid probe address 0x00 [ 2.338489] I2C: i2c-0: AW16XX I2C adapter [ 2.345959] config i2c gpio with gpio_config api [ 2.349912] i2c i2c-1: Invalid probe address 0x00 [ 2.357679] I2C: i2c-1: AW16XX I2C adapter [ 2.365137] config i2c gpio with gpio_config api [ 2.369056] i2c i2c-2: Invalid probe address 0x00 [ 2.376819] I2C: i2c-2: AW16XX I2C adapter [ 2.382690] [ace_drv] start!!! [ 2.385034] [ace_drv] init end!!! [ 2.386698] [pa_drv] start!!! [ 2.388907] [pa_drv] init end!!! [ 2.391239] axp20_ldo1: 1300 mV [ 2.399677] axp20_ldo2: 1800 <--> 3300 mV at 3000 mV [ 2.410006] axp20_ldo3: 700 <--> 3500 mV at 2800 mV [ 2.420112] axp20_ldo4: 1250 <--> 3300 mV at 2800 mV [ 2.430295] axp20_buck2: 700 <--> 2275 mV at 1400 mV [ 2.440535] axp20_buck3: 700 <--> 3500 mV at 1250 mV [ 2.450442] axp20_ldoio0: 1800 <--> 3300 mV at 2800 mV [ 2.465225] input: axp20-supplyer as /devices/platform/sunxi-i2c.0/i2c-0/0-0034/axp20-supplyer.28/input/input1 [ 2.494055] axp20_ldo2: Failed to create debugfs directory [ 2.504511] sunxi_wdt: sunxi WatchDog Timer Driver v1.0 [ 2.514749] sunxi_wdt: initialized (timeout=23s, nowayout=0) [ 2.527391] watchdog: Software Watchdog: cannot register miscdev on minor=130 (err=-16) [ 2.540263] watchdog: error registering /dev/watchdog (err=-16) [ 2.550279] device-mapper: uevent: version 1.0.3 [ 2.562631] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 2.575994] device-mapper: multipath: version 1.3.0 loaded [ 2.586977] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.599067] device-mapper: multipath queue-length: version 0.1.0 loaded [ 2.611241] device-mapper: multipath service-time: version 0.2.0 loaded [ 2.621263] cpuidle: using governor ladder [ 2.628253] cpuidle: using governor menu [ 2.634482] [mmc-msg] sw_mci_init [ 2.643562] [mmc-msg] MMC host used card: 0x9, boot card: 0x0, io_card 8 [ 2.655558] [mmc-msg] sdc0 set round clock 400000, src 24000000 [ 2.669734] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 2.686997] [mmc-msg] sdc0 Probe: base:0xf014c000 irq:64 sg_cpu:f014e000(43c00000) ret 0. [ 2.700154] [mmc-msg] sdc3 set round clock 400000, src 24000000 [ 2.714257] [mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 2.731483] [mmc-msg] sdc3 Probe: base:0xf0150000 irq:67 sg_cpu:f0152000(43c01000) ret 0. [ 2.744225] [mmc_pm]: failed to fetch sdio card configuration! [ 2.749210] ledtrig-cpu: registered to indicate activity on CPUs [ 2.760334] usbcore: registered new interface driver usbhid [ 2.768711] usbhid: USB HID core driver [ 2.775259] ashmem: initialized [ 2.781985] logger: created 256K log 'log_main' [ 2.790289] logger: created 256K log 'log_events' [ 2.798665] logger: created 256K log 'log_radio' [ 2.807048] logger: created 256K log 'log_system' [ 2.817340] IPv4 over IPv4 tunneling driver [ 2.824273] TCP: bic registered [ 2.829739] TCP: cubic registered [ 2.835603] TCP: westwood registered [ 2.841783] TCP: highspeed registered [ 2.847715] TCP: hybla registered [ 2.853200] TCP: htcp registered [ 2.858697] TCP: vegas registered [ 2.864182] TCP: veno registered [ 2.869938] TCP: scalable registered [ 2.875521] TCP: lp registered [ 2.880747] TCP: yeah registered [ 2.886502] TCP: illinois registered [ 2.893288] Initializing XFRM netlink socket [ 2.901625] NET: Registered protocol family 10 [ 2.910461] NET: Registered protocol family 17 [ 2.918372] NET: Registered protocol family 15 [ 2.927458] [mmc_pm]: No sdio card, please check your config !! [ 2.931147] Registering the dns_resolver key type [ 2.937938] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4 [ 2.954156] Registering SWP/SWPB emulation handler [ 2.963564] axp20_buck2: Failed to create debugfs directory [ 2.975313] [cpu_freq] INF:-------------------V-F Table------------------- [ 2.987238] [cpu_freq] INF: voltage = 1450mv frequency = 1008MHz [ 2.998374] [cpu_freq] INF: voltage = 1400mv frequency = 912MHz [ 3.009507] [cpu_freq] INF: voltage = 1300mv frequency = 864MHz [ 3.020636] [cpu_freq] INF: voltage = 1250mv frequency = 792MHz [ 3.031768] [cpu_freq] INF: voltage = 1200mv frequency = 720MHz [ 3.042912] [cpu_freq] INF: voltage = 1150mv frequency = 624MHz [ 3.054045] [cpu_freq] INF: voltage = 1100mv frequency = 528MHz [ 3.065225] [cpu_freq] INF: voltage = 1050mv frequency = 312MHz [ 3.076361] [cpu_freq] INF: voltage = 1000mv frequency = 0MHz [ 3.088272] [cpu_freq] INF:----------------------------------------------- [ 3.104786] [cpu_freq] INF:sunxi_cpufreq_initcall, get cpu frequency from sysconfig, max freq: 912MHz, min freq: 60MHz [ 3.119234] registered taskstats version 1 [ 3.127819] I2C: i2c-3: HDMI I2C adapter [ 3.154136] ParseEDID [ 3.171099] EDID version: 1.3 [ 3.180336] PCLK=148500000 X 1920 2008 2052 2200 Y 1080 1084 1089 1125 fr 60 PP [ 3.191475] Using above mode as preferred EDID mode [ 3.202179] PCLK=85500000 X 1366 1436 1579 1792 Y 768 771 774 798 fr 59 PP [ 3.221847] Unimplemented SVD code 33 [ 3.228133] Unimplemented SVD code 34 [ 3.234400] Unimplemented SVD code 22 [ 3.243919] disp_clk: Could not find a matching pll-freq for 53900000 pclk [ 3.256703] disp_clk: Could not find a matching pll-freq for 108100000 pclk [ 3.269485] disp_clk: Could not find a matching pll-freq for 53900000 pclk [ 3.282180] disp_clk: Could not find a matching pll-freq for 74200000 pclk [ 3.294874] disp_clk: Could not find a matching pll-freq for 72650000 pclk [ 3.307655] disp_clk: Could not find a matching pll-freq for 146850000 pclk [ 3.320522] disp_clk: Could not find a matching pll-freq for 118650000 pclk [ 3.333303] disp_clk: Could not find a matching pll-freq for 83650000 pclk [ 3.345996] disp_clk: Could not find a matching pll-freq for 74600000 pclk [ 3.358690] disp_clk: Could not find a matching pll-freq for 78800000 pclk [ 3.371387] disp_clk: Could not find a matching pll-freq for 53450000 pclk [ 3.384084] disp_clk: Could not find a matching pll-freq for 27100000 pclk [ 3.396778] disp_clk: Could not find a matching pll-freq for 26150000 pclk [ 3.408096] Parse_VideoData_Block: VIC 16 (native) support [ 3.417235] Parse_VideoData_Block: VIC 31 support [ 3.425496] Parse_VideoData_Block: VIC 4 support [ 3.433766] Parse_VideoData_Block: VIC 19 support [ 3.442041] Parse_VideoData_Block: VIC 5 support [ 3.450418] Parse_VideoData_Block: VIC 20 support [ 3.458700] Parse_VideoData_Block: VIC 3 support [ 3.466973] Parse_VideoData_Block: VIC 18 support [ 3.475320] Parse_VideoData_Block: VIC 32 support [ 3.483677] Parse_VideoData_Block: VIC 33 support [ 3.492032] Parse_VideoData_Block: VIC 34 support [ 3.500301] Parse_VideoData_Block: VIC 7 support [ 3.508571] Parse_VideoData_Block: VIC 22 support [ 3.516841] Parse_AudioData_Block: max channel=2 [ 3.525360] Parse_AudioData_Block: SampleRate code=7 [ 3.533976] Parse_AudioData_Block: WordLen code=7 [ 3.542158] Find HDMI Vendor Specific DataBlock [ 3.552515] PCLK=74250000 X 1920 2448 2492 2640 Y 540 542 547 562 fr 50 PP [ 3.565213] PCLK=74250000 X 1920 2008 2052 2200 Y 540 542 547 562 fr 60 PP [ 3.577909] PCLK=74250000 X 1280 1720 1760 1980 Y 720 725 730 750 fr 50 PP [ 3.590605] PCLK=74250000 X 1280 1390 1430 1650 Y 720 725 730 750 fr 60 PP [ 3.602954] PCLK=27000000 X 720 732 796 864 Y 576 581 586 625 fr 50 PP [ 3.614976] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok [ 3.623958] waited 0 ms for EDID info [ 3.634166] disp clks: lcd 148500000 pre_scale 1 hdmi 148500000 pll 297000000 2x 0 [ 3.661839] [mmc-msg] mmc 0 detect change, present 1 [ 4.170825] [mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 4.185371] [mmc-msg] sdc0 power on [ 4.211254] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 4.225536] [mmc-msg] sdc0 set round clock 400000, src 24000000 [ 4.311225] [mmc-err] smc 0 err, cmd 52, RTO [ 4.319725] [mmc-err] smc 0 err, cmd 52, RTO [ 4.332437] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 4.352548] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 4.367299] [mmc-err] smc 0 err, cmd 5, RTO [ 4.375600] [mmc-err] smc 0 err, cmd 5, RTO [ 4.383915] [mmc-err] smc 0 err, cmd 5, RTO [ 4.392228] [mmc-err] smc 0 err, cmd 5, RTO [ 4.405488] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 4.423220] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 4.443331] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B [ 4.537228] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B [ 4.554957] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B [ 4.569578] [mmc-msg] sdc0 set round clock 42857143, src 600000000 [ 4.639252] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B [ 4.653179] mmc0: new high speed SDHC card at address aaaa [ 4.662633] mmcblk0: mmc0:aaaa SU08G 7.40 GiB [ 4.670556] mmcblk0: p1 p2 [ 5.589850] Console: switching to colour frame buffer device 240x67 [ 5.649709] axp20_buck3: incomplete constraints, leaving on [ 5.660090] axp20_buck2: incomplete constraints, leaving on [ 5.670355] axp20_ldo4: incomplete constraints, leaving on [ 5.680530] axp20_ldo3: incomplete constraints, leaving on [ 5.690699] axp20_ldo2: incomplete constraints, leaving on [ 5.700872] axp20_ldo1: incomplete constraints, leaving on [ 5.709347] console [netcon0] enabled [ 5.716527] netconsole: network logging started [ 5.728560] sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:00 UTC (1262304000) [ 5.739119] ALSA device list: [ 5.745134] #0: sunxi-CODEC Audio Codec [ 5.751344] #1: sunxi-sndhdmi [ 5.786512] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 5.799689] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 5.822515] devtmpfs: mounted [ 5.830837] Freeing init memory: 2172K [ 6.821241] udevd[180]: starting version 175 [ 8.584263] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 8.891308] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro [ 9.415608] UMP<2>: Inserting UMP device driver. Compiled: Jul 13 2015, time: 16:01:33 [ 9.422595] UMP<2>: Using OS memory backend, allocation limit: 134217728 [ 9.429190] UMP: UMP device driver loaded [ 9.585317] Mali: permit MALI_IOC_MEM_MAP_EXT ioctl for framebuffer (paddr=0x51000000, size=67108864) [ 9.597045] mali: use config clk_div 1 [ 9.602547] mali: clk_div 1 [ 9.605921] Mali: mali clock set completed, clock is 312000000 Hz [ 9.613347] mali: use config clk_div 1 [ 9.618883] mali: clk_div 1 [ 9.622206] Mali: mali clock set completed, clock is 312000000 Hz [ 9.628452] Mali: Mali device driver loaded [ 10.197388] usbcore: registered new interface driver rtl8192cu [ 10.297726] [cedar dev]: install start!!! [ 10.301192] [cedar dev]: install end!!! [ 17.825691] ehci_irq: port change detect [ 17.830068] ehci_irq: port change detect [ 17.899899] ehci_irq: port change detect [ 18.188624] usb 4-1: new high-speed USB device number 2 using sw-ehci [ 18.407987] Warning: this sunxi disp driver will see significant redesign. [ 18.425424] Applications using /dev/disp directly will break. [ 18.441135] For more information visit: http://linux-sunxi.org/Sunxi_disp_driver [ 18.452671] [DISP] layer allocated: 0,101 [ 18.857028] [drm] Initialized drm 1.1.0 20060810 [ 18.897105] Mali DRM initialize, driver name: mali_drm, version 2.1 [ 18.911032] [drm] Initialized mali_drm 2.1.1 20101111 on minor 0 [ 18.922488] Mali DRM initialize, driver name: mali_drm, version 2.1 [ 18.934602] [drm] Initialized mali_drm 2.1.1 20101111 on minor 1 [ 18.957948] UMP<2>: New session opened [ 19.034191] asix 4-1:1.0: eth0: register 'asix' at usb-sw-ehci-1, ASIX AX88772 USB 2.0 Ethernet, 00:80:8a:8e:ba:7d [ 19.051611] usbcore: registered new interface driver asix [ 19.168628] udevd[225]: renamed network interface eth0 to eth2 [ 20.041311] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 20.991651] ADDRCONF(NETDEV_UP): eth2: link is not ready [ 22.785391] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready [ 22.802782] asix 4-1:1.0: eth2: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 24.329413] [DISP] layer released: 0,101 [ 24.359383] [DISP] layer allocated: 0,101