Permalink
Commits on Sep 27, 2013
  1. ARM: at91: remove partial parameter in bootargs for at91sam9x5ek.dtsi

    Nicolas Ferre authored and JoshWu committed Mar 22, 2013
    Remove the malformed "mem=" bootargs parameter in at91sam9x5ek.dtsi
    
    Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
    Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
    Cc: stable <stable@vger.kernel.org> # 3.8+
  2. ov5640: fix bug when fail to detect ov5640, the i2c bus is not available

    JoshWu committed Sep 27, 2013
    That will impact the audio codec detection.
    
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
  3. at91sam9x5ek: update defconfig to enable audio support

    JoshWu committed Sep 25, 2013
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
  4. ARM: AT91: DTS: sam9x5ek: add sound configuration

    rgenoud authored and JoshWu committed Aug 12, 2013
    The sam9x5ek board has 2 jacks:
    headphone wired on RHPOUT/LHPOUT of the wm8731
    line in wired on LLINEIN/RLINEIN of the wm8731
    
    Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
    [Cherry-pick: 90d0192]
    Signed-off-by: Bo Shen <voice.shen@atmel.com>
  5. ARM: AT91: DTS: sam9x5ek: enable SSC

    rgenoud authored and JoshWu committed Aug 12, 2013
    Enable the SSC needed for the WM8731 codec
    
    Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
    [Cherry-pick: 45b7635]
    Signed-off-by: Bo Shen <voice.shen@atmel.com>
  6. ARM: AT91: DTS: sam9x5ek: add WM8731 codec

    rgenoud authored and JoshWu committed Aug 12, 2013
    The WM8731 codec on sam9x5ek board is on i2c, address 1A
    
    Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
    [Cherry-pick: 4dc6e27]
    Signed-off-by: Bo Shen <voice.shen@atmel.com>
  7. ASoC: atmel: machine driver for at91sam9x5-wm8731 boards

    Nicolas Ferre authored and JoshWu committed Jul 30, 2013
    Description of the Asoc machine driver for an at91sam9x5 based board
    with a wm8731 audio DAC. Wm8731 is clocked by a crystal and used as a
    master on the SSC/I2S interface. Its connections are a headphone jack
    and an Line input jack.
    
    [Richard: this is based on an old patch from Nicolas that I forward
    ported and reworked to use only device tree]
    
    Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
    Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
    [Cherry-pick: fdbcb3c]
    Signed-off-by: Bo Shen <voice.shen@atmel.com>
  8. ASoC: wm8731: add rates constraints

    rgenoud authored and JoshWu committed Jul 30, 2013
    Depending on the mclk (or crystal) selected, the wm8731 codec have some
    constraints on its data sampling rates:
    e.g. with a 12.288MHz or 18.432MHz crystal, the authorized rates are
    8KHz, 32KHz, 48KHz and 96KHz.
    
    Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
    [Cherry-pick: 0890c2b]
    Signed-off-by: Bo Shen <voice.shen@atmel.com>
  9. ASoC: codecs: remove __dev* attributes

    wfp5p authored and JoshWu committed Dec 7, 2012
    CONFIG_HOTPLUG is going away as an option.  As result the __dev*
    markings will be going away.
    
    Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
    and __devexit.
    
    Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
    [Cherry-pick: 7a79e94]
    Signed-off-by: Bo Shen <voice.shen@atmel.com>
  10. ARM: at91: sam9x5: add ssc clock

    Bo Shen authored and JoshWu committed Sep 27, 2013
    Signed-off-by: Bo Shen <voice.shen@atmel.com>
  11. ARM: at91: sam9x5: add ssc0 alias

    Bo Shen authored and JoshWu committed Sep 25, 2013
    Signed-off-by: Bo Shen <voice.shen@atmel.com>
Commits on Sep 26, 2013
  1. at91sam9g45: enable root nfs option

    JoshWu committed Sep 26, 2013
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
  2. at91sam9g20: enable audio support in defconfig

    JoshWu committed Sep 26, 2013
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
  3. ASoC: atmel_ssc_dai: temp solution for sam9g20 audio

    Bo Shen authored and JoshWu committed Sep 26, 2013
    Temporary solution for non-dt Linux kernel audio support on sam9g20ek
    
    Signed-off-by: Bo Shen <voice.shen@atmel.com>
  4. ARM: at91: atmel-ssc: add platform device id table

    Bo Shen authored and JoshWu committed Nov 6, 2012
    Add platform device id to check whether the SSC controller support
    pdc or dam for data transfer
    
    If match "at91rm9200_ssc", which support pdc for data transfer
    If match "at91sam9g45_ssc", which support dma for data transfer
    
    Signed-off-by: Bo Shen <voice.shen@atmel.com>
  5. ASoC: sam9g20: using platform device for audio part

    Bo Shen authored and JoshWu committed Oct 11, 2012
    Signed-off-by: Bo Shen <voice.shen@atmel.com>
  6. defconfig: generate the mtd_tests modules for nand benchmark

    JoshWu committed Sep 26, 2013
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
Commits on Sep 25, 2013
  1. at91-dt: enable ov5642/ov5640 support in defconfig

    JoshWu committed Sep 25, 2013
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
  2. watchdog: at91: get rid of building warning

    Bo Shen authored and JoshWu committed Sep 25, 2013
    get rid of the following warning
      WARNING: modpost: Found 2 section mismatch(es)
    
    Signed-off-by: Bo Shen <voice.shen@atmel.com>
  3. sama5d3x: dt: Add missing MICBIAS widget

    JoshWu committed Sep 25, 2013
    Reported-by: Bo Shen <voice.shen@atmel.com>
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
  4. sama5d3/dts: move the isi support dt params in a dtsi file

    JoshWu committed Sep 23, 2013
    Includes sama5d3mb_isi.dtsi in the end of sama5d3xek.dts will enable ISI
    support. Otherwise will enable audio support.
    
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
Commits on Sep 23, 2013
  1. leds-gpio: of: led should not be created if its status is disabled

    JoshWu committed Sep 23, 2013
    now the leds-gpio driver will create every child led node without
    checking the status is disabled or not.
    
    for example, if we have a led node like d3, and its status is disabled:
    	leds {
    		d3 {
    			label = "d3";
    			gpios = <&pioE 24 0>;
    			status = "disabled";
    		};
    	};
    
    we except the d3 should not be created. And the gpios should not be
    request as well.
    
    But current driver will create d3 and request its gpio.
    
    This patch fix this by using for_each_available_child_of_node() to
    enumerate all child nodes. So the disabled node will be inavilable.
    
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
  2. ov2643: get correct ov2643's format in try_fmt

    JoshWu committed Sep 23, 2013
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
Commits on Sep 18, 2013
  1. ov2643: add ov2643 support

    JoshWu committed Sep 18, 2013
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
  2. ov5640: add vflip and mirror make it same as ov2640

    JoshWu committed Sep 17, 2013
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
  3. ov5640: add 1280x960 register setting, and works

    JoshWu committed Sep 17, 2013
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
  4. ov5640: now we support multiple resolutions

    JoshWu committed Sep 16, 2013
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
  5. ov5640: can work with vga mode now.

    JoshWu committed Sep 10, 2013
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
  6. ov5640: support ov5642 and ov5640 both with different connect type(MI…

    JoshWu committed Aug 13, 2013
    …PI or PARALLEL)
    
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
  7. ov5640: add a flag to choose ov5640 or ov5642 sensor init reg list.

    JoshWu committed Jun 19, 2013
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
  8. ov5640: use ov5642 as ov5640 in defconfig

    JoshWu committed Jun 19, 2013
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
  9. ov5640: add ov5640 platform device

    JoshWu committed Jun 14, 2013
    note: need to enable ov2640 selection in menuconfig since board-dt.c only register
    the i2c device when ov2640 is selected.
    
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
Commits on Sep 13, 2013
  1. at91sam9g20: update defconfig to support UBI filesys and DEVTMPFS

    JoshWu committed Sep 13, 2013
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
Commits on Sep 12, 2013
  1. at91sam9g45: support isi & ov2640 in defconfig

    JoshWu committed Sep 12, 2013
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
  2. at91sam9g45: support ubi file system in defconfig

    JoshWu committed Sep 12, 2013
    Signed-off-by: Josh Wu <josh.wu@atmel.com>