Permalink
Commits on Sep 11, 2015
  1. Makefile: move to linux4sam-5.0-alpha7 version

    Nicolas Ferre
    Nicolas Ferre committed Sep 11, 2015
    Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Commits on Sep 8, 2015
  1. Makefile: move to linux4sam-5.0-alpha6 version

    Nicolas Ferre
    Nicolas Ferre committed Sep 8, 2015
    Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Commits on Aug 31, 2015
  1. Merge branch 'at91-3.18-sama5d2/isc' into linux-3.18-at91

    Nicolas Ferre
    Nicolas Ferre committed Aug 31, 2015
  2. sama5d2_xplained: align to latest hardware changes, sensor use i2c1

    JoshWu committed Aug 27, 2015
    In hardware revA-150724, camera sensor change from i2c0 to i2c1.
    
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
  3. Merge branch 'at91-3.18-sama5d2/dt' into linux-3.18-at91

    Nicolas Ferre
    Nicolas Ferre committed Aug 31, 2015
  4. sama5d2_xplained_pda4: dts: fix gpio button pin

    JoshWu committed Aug 31, 2015
    The gpio button use PB9 in latest hardware schematics.
    
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
  5. sama5d2_xplained_pda4: dts: add isc & ov2640/ov2643 sensor support

    JoshWu committed Aug 31, 2015
    Align sama5d2_xplained_pda4.dts with sama5d2_xplained.dts file.
    
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
  6. sama5d2_xplained: align to latest hardware changes, sensor use i2c1

    JoshWu committed Aug 27, 2015
    In hardware revA-150724, camera sensor change from i2c0 to i2c1.
    
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
Commits on Aug 28, 2015
  1. ASoC: atmel-classd: adapt the code style

    sowu committed Aug 28, 2015
    Adapt the code style to meet linux mainline standard.
    
    Signed-off-by: Songjun Wu <songjun.wu@atmel.com>
Commits on Aug 21, 2015
  1. ARM: at91/dt: sama5d2 xplained: fix sdmmc0 card detect pinmux

    ldesroches committed Aug 21, 2015
    Some stuff was missing to mux correctly the sdmmc0 card detect signal.
    
    Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
  2. ARM: at91/dt: sama5d2 xplained: fix sdmmc0 card detect pinmux

    ldesroches committed Aug 21, 2015
    Some stuff was missing to mux correctly the sdmmc0 card detect signal.
    
    Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
  3. Makefile: add linux4sam-5.0-alpha5 version

    ldesroches committed Aug 20, 2015
    Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Commits on Aug 20, 2015
  1. ARM: at91/dt: sama5d2 xplained: align pda4 .dts

    ldesroches committed Aug 20, 2015
    Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
  2. ARM: at91/dt: sama5d2 xplained: fix pinctrl for LEDs and button

    ldesroches committed Aug 20, 2015
    The group declaration was not updated for the new hardware.
    
    Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
  3. ARM: at91/dt: sama5d4: change watchdog compatible

    wenyouya authored and ldesroches committed Aug 12, 2015
    Change the watchdog compatible to "atmel,sama5d4-wdt" to support new feature.
    
    Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
  4. ARM: at91/sama5_defconfig: add sama5d4 watchdog driver

    wenyouya authored and ldesroches committed Aug 12, 2015
    Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
  5. ARM: at91/dt: sama5d2: change watchdog compatible

    wenyouya authored and ldesroches committed Aug 12, 2015
    Change the watchdog compatible to "atmel,sama5d4-wdt" to support new feature.
    
    Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
  6. ARM: at91/dt: sama5d2 xplained: mux sdmmc0 cd signal

    ldesroches committed Aug 20, 2015
    The sdmmc0 card detect signal was not mux because its value was
    inverted. The default value of the card detect signal when not muxed was
    corresponding to card present. With an inverted polarity on card detect
    signal on the new hardware, we can use it normally.
    
    Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
  7. ARM: at91/dt: sama5d2 xplained: remove usba's vbus 5v

    JoshWu authored and ldesroches committed Aug 20, 2015
    In RevA-150724's hardware modification, the USBA vbus_5v is
    removed. So remove the vbus part of usba.
    
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
  8. ARM: at91/dt: sama5d2 xplained: adapt to the hardware modifications

    JoshWu authored and ldesroches committed Aug 20, 2015
    User Button: change to use PB9
    Red LED: change to use PB6
    
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
  9. ARM: at91/dt: sama5d2: enable crypto devices

    ldesroches committed Aug 6, 2015
    Enable SHA, AES and TDES devices.
    
    Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
  10. ARM: at91/dt: sama5d2: add TDES node

    leileiz authored and ldesroches committed Jul 27, 2015
    Add TDES definition node in SoC dtsi file.
    
    Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com>
  11. ARM: at91/dt: sama5d2: correct DMA in AES and SHA

    leileiz authored and ldesroches committed Jul 27, 2015
    Change the DMA channels in AES and SHA to correct value.
    
    Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com>
  12. ARM: at91: dt: add vsync/hsync for all supported ov sensors

    JoshWu authored and ldesroches committed Aug 6, 2015
    Since we connect the board in parallel bus, so we need to specify the
    vsync/hsync polarity, otherwise, driver will think it's embedded sync
    singal (BT 656 or BT 1120).
    
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
  13. ARM: at91/dt: ov2640: add hsync/vsync-active property

    JoshWu authored and ldesroches committed Aug 6, 2015
    On at91sam9x5ek/at91sam9m10g45ek/sama5d3xek boards, we use the parallel
    connection for ov2640. So we must set the hsync/vsync property.
    
    Otherwise, the connection would be seen as BT.656 or BT.1120.
    
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
Commits on Aug 12, 2015
  1. media: atmel-isc: support rgb565 output format

    JoshWu committed Aug 11, 2015
    now support both Bayer format & RGB565 output when sensor output bayer RGB.
    
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
  2. media: atmel-isc: add gammar correction to make rgb565 work correct

    JoshWu committed Aug 12, 2015
    As if we enable CFA, it will output RGB valid data to GAM module.
    In GAM module, it will do a 12 to 10 bits compression, that means 2 bits
    information will be lost if you don't use gammar table.
    If we set up a gammar table then 12 to 10 bits compression work
    correctly.
    
    So this patch will enable gammar table to make it Bayer -> RGB565 work
    correctly.
    
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
  3. media: atmel-isc: support convert bayer RGB to RGB565

    JoshWu committed Aug 12, 2015
    TODO: still have issue, as if we enable CFA without GAM, then some data
    will be lost as GAM will compress the 12bit -> 10bit.
    
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
  4. media: atmel-isc: add bayer support and will output bayer rgb

    JoshWu committed Aug 11, 2015
    Atmel-isc don't do anything but just output the same data.
    
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
  5. media: atmel-isc: simplify code in configure_geometry()

    JoshWu committed Aug 11, 2015
    We don't need the rlp variable. just write the register directly.
    
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
  6. media: atmel-isc: reduce the configure_geometry()'s parameters

    JoshWu committed Aug 12, 2015
    Signed-off-by: Josh Wu <josh.wu@atmel.com>
  7. media: atmel-isc: make configure_geometry() return nothing

    JoshWu committed Aug 11, 2015
    As in set_fmt() we will check the format and return error if format is
    not supported.
    
    So in configure_geometry(), we don't need to check the support format
    again.
    
    Signed-off-by: Josh Wu <josh.wu@atmel.com>