Skip to content
Branch: master
Go to file
Code

Latest commit

Files

Permalink
Failed to load latest commit information.
Type
Name
Latest commit message
Commit time
doc
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

README.md

Pymoku

A Python library for the command, control and monitoring of the Liquid Instruments Moku:Lab. API documentation can be found at ReadTheDocs.

Getting Started

1. Requirements

  • Python installed. We support Python 2.7 and 3.6.
  • pip installed (pip for Python 2.7 or pip3 for Python 3)
  • Bonjour services installed. See Installing Bonjour Libraries.
  • Your Moku:Lab connected to the same network as your computer.
  • Internet access.

1. Install Pymoku

Open a command-line terminal and type

pip install --upgrade pymoku
moku update fetch

2. Update your Moku:Lab

Update your Moku:Lab with the latest firmware by typing the following in your terminal

moku --serial=123456 update install

The serial number is the middle six digits found on the underside of the Moku:Lab. For example: XXX-123456-X.

You can also update the Moku:Lab using its IP address with

moku --ip=192.168.0.1 update install

The IP address of your Moku:Lab device can be found with

moku list

NOTE: The update process is indicated by alternating orange and white lights, or a pulsing orange light. This process can take up to 30 minutes.

3. Start scripting

You are now ready to control your Moku:Lab using Python! You can find a few example scripts in the examples/ folder. Here is a basic example of how to connect to a Moku:Lab, deploy the Oscilloscope and fetch a single hi-res data trace. Open python and run the following code

from pymoku import Moku
from pymoku.instruments import Oscilloscope

m = Moku.get_by_serial(123456)
i = m.deploy_instrument(Oscilloscope)

i.set_timebase(-1e-3, 1e-3) # 1ms before and after trigger event
i.set_trigger('in1', 'rising', 0) # rising edge through 0 volts

data = i.get_data()
print(data.ch1, data.ch2, data.time)

m.close()

Troubleshooting

moku: command not found

Ensure pymoku has been successfully installed in your Python distrubution by open a python shell and running

import pymoku

No error indicates a successful install.

You may need to add python binaries to your PATH. This varies with operating system and python version but as an example

export PATH=$PATH:/home/user/.local/bin

Installing Bonjour Libraries

To automatically discover Moku:Lab on your network (i.e. by name or serial) you must have Bonjour installed. Without Bonjour, your Moku:Lab will still be accessible by IP address, you just won't be able to automatically connect by name or serial number, or find it using moku list. To install Bonjour:

  • Windows install the Bonjour Printer Services. Note that you can choose not to install this service, and

  • Linux install the dnssd compatibility libraries. For Ubuntu, this is

      $ sudo apt-get install libavahi-compat-libdnssd1
    
  • OSX comes with Bonjour by default.

I can't find my Moku:Lab on the network

Search your local network for running Moku:Labs with

$ moku list

If you do not see your Moku:Lab, confirm that your Moku:Lab is powered ON, and that you have Bonjour installed on your operating system Installing Bonjour Libraries.

If you are connecting over

  • Access Point Mode Ensure your computer is connected to the Moku:Lab's WiFi network. The Moku:Lab will default to the IP address 192.168.73.1.
  • Ethernet Ensure the cable is plugged in an you see the orange activity light. You will need a DHCP server running on your network to provide the Moku:Lab an IP address.
  • WiFi After configuring the WiFi in the Moku:Lab (currently requires an iPad), you should see a solid blue light on the front. If it's blinking indefinitely or off, check the configuration again using an iPad.
  • USB ensure you have plugged the Moku:Lab's micro-USB port into the USB port of your PC. For Linux users, you will have to change the USB-Ethernet network settings to "Link Local" for IPv4 and IPv6. NOTE: Currently only one Moku:Lab can be connected over USB at a time.

See Connecting to your Moku:Lab guide on how to find your device's IP address. If you are still having difficulty, contact support@liquidinstruments.com.

ImportError: No Module named pymoku

Make sure you are running the version of Python you installed pymoku to. Often a system will have multiple Python installations. Try substituting pip with python -m pip in the installation. If you installed pymoku inside an Environment (i.e. via virtualenv or conda-env), ensure that Environment is activated. You can check that pymoku is installed in your currently running environment using

(myenv)$ pip list

or

(myenv)$ conda list # For conda users

zmq.error.Again: Resource temporarily unavailable

  1. Ensure your Moku:Lab is visible on the network by calling moku list or searching for the service using BonjourBrowser
  2. Make sure you are using the latest version of pymoku, and that your Moku:Lab has been upgraded to the newest firmware. See the Installation section above for details.

pymoku.DeployException: Deploy Error 3

Confirm you have have the latest binary data pack and that your Moku:Lab is running the latest firmware

$ moku update fetch
$ moku --serial=123456 update install

Issue Tracking

Please log issues here on Github.

About

Python library for the command, control and monitoring of the Liquid Instruments Moku:Lab device.

Resources

License

You can’t perform that action at this time.