A attempt at controlling a homemade homebrewing rig, at home.
See adaptiman/adaptibrew for more details.
Note: You probably don't want to install this. For anything to work, you need quite a bit of hardware. If you have the hardware set up correctly, then you already know what you're doing. Otherwise:
$ pip install brewer
Or build from source:
$ git clone http://github.com/llamicron/brewer.git
$ cd brewer
$ make build
$ pip install dist/brewer-[VERSION-NUMBER].tar.gz
Documentation generated by PDoc. See the docs at https://llamicron.github.io/brewer/
Warning: You should probably be using weber. It does the same thing as this, but it's a web interface instead of a command line one.
After installation with pip (see above), run python from a command line and import the module.
>> from brewer.controller import Controller
>> con = Controller()
>> con.hlt(1) # Open HLT valve
>> con.hlt(0) # Close HLT valve
>> ...
If you don't have the proper hardware connected, Controller() will return a FakeController class. You can use this normally and it will simulate the hardware.