Skip to content
Browse files

initial import

  • Loading branch information...
0 parents commit 14f0fa2d081186de36c283fc658f35603e888262 Russell Garrett committed Mar 23, 2010
Showing with 264 additions and 0 deletions.
  1. +32 −0 behold.csv
  2. +12 −0 carve.csv
  3. +5 −0 clip.csv
  4. +7 −0 comb.csv
  5. +4 −0 comment.csv
  6. +7 −0 cool.csv
  7. +12 −0 export.csv
  8. +22 −0 fill.csv
  9. +12 −0 fillet.csv
  10. +6 −0 hop.csv
  11. +8 −0 inset.csv
  12. +4 −0 material.csv
  13. +9 −0 multiply.csv
  14. +12 −0 oozebane.csv
  15. +4 −0 polyfile.csv
  16. +33 −0 raft_ABS.csv
  17. +3 −0 skeinforge.csv
  18. +9 −0 skeinview.csv
  19. +16 −0 speed.csv
  20. +6 −0 statistic.csv
  21. +8 −0 stretch.csv
  22. +7 −0 tower.csv
  23. +6 −0 unpause.csv
  24. +6 −0 vectorwrite.csv
  25. +14 −0 wipe.csv
32 behold.csv
@@ -0,0 +1,32 @@
+Format is tab separated preferences.
+Activate Behold False
+Band Height (layers): 5
+Bottom Band Brightness (ratio): 0.7
+Bottom Layer Brightness (ratio): 1.0
+From the Bottom False
+From the Top True
+Draw Arrows True
+Open File to Behold
+Go Around Extruder Off Travel False
+Layers From (index): 0
+Layers To (index): 999999
+Number of Fill Bottom Layers (integer): 1
+Number of Fill Top Layers (integer): 1
+Pixels over Extrusion Width (ratio): 10.0
+Screen Horizontal Inset (pixels): 100
+Screen Vertical Inset (pixels): 50
+Viewpoint Latitude (degrees): 45.0
+Viewpoint Longitude (degrees): 210.0
+Width of Extrusion Thread (pixels): 1
+Width of Fill Bottom Thread (pixels): 3
+Width of Fill Top Thread (pixels): 3
+Width of Loop Thread (pixels): 3
+Width of Perimeter Inside Thread (pixels): 4
+Width of Perimeter Outside Thread (pixels): 4
+Width of Raft Thread (pixels): 1
+Width of Travel Thread (pixels): 0
+Width of X Axis (pixels): 5
+Width of Y Axis (pixels): 5
+Width of Z Axis (pixels): 5
+windowPositionBehold Dynamic Preferences 0+0
+windowPositionBehold Preferences 0+0
12 carve.csv
@@ -0,0 +1,12 @@
+Format is tab separated preferences.
+Extrusion Width over Thickness (ratio): 1.45
+Open File to be Carved
+Import Coarseness (ratio): 1.0
+Correct Mesh True
+Unproven Mesh False
+Infill Bridge Thickness over Layer Thickness (ratio): 1.0
+Infill Bridge Width over Extrusion Width (ratio): 1.0
+Infill in Direction of Bridges True
+Layer Thickness (mm): 0.4
+Layer Thickness over Precision (ratio): 10.0
+windowPositionBehold Preferences 0+0
5 clip.csv
@@ -0,0 +1,5 @@
+Format is tab separated preferences.
+Activate Clip True
+Clip Over Extrusion Width (ratio): 0.18
+Open File to be Clipped
+windowPositionBehold Preferences 0+0
7 comb.csv
@@ -0,0 +1,7 @@
+Format is tab separated preferences.
+Activate Comb True
+Arrival Inset Follow Distance over Extrusion Width (ratio): 3.0
+Jitter Over Extrusion Width (ratio): 10.0
+Minimum Perimeter Departure Distance over Extrusion Width (ratio): 5.0
+Open File to be Combed
+windowPositionBehold Preferences 0+0
4 comment.csv
@@ -0,0 +1,4 @@
+Format is tab separated preferences.
+Activate Comment False
+Open File to Write Comments for
+windowPositionBehold Preferences 0+0
7 cool.csv
@@ -0,0 +1,7 @@
+Format is tab separated preferences.
+Activate Cool False
+Open File to be Cooled
+Minimum Layer Time (seconds): 60.0
+Turn Fan On at Beginning True
+Turn Fan Off at Ending True
+windowPositionBehold Preferences 0+0
12 export.csv
@@ -0,0 +1,12 @@
+Format is tab separated preferences.
+Activate Export True
+Also Send Output To:
+Delete Comments False
+Delete M110 Gcode Line True
+binary_16_byte False
+Do Not Change Output True
+gcode_small False
+gcode_step False
+File Extension: gcode
+Open File to be Exported
+windowPositionBehold Preferences 0+0
22 fill.csv
@@ -0,0 +1,22 @@
+Format is tab separated preferences.
+Diaphragm Period (layers): 999999
+Diaphragm Thickness (layers): 0
+Extra Shells on Alternating Solid Layer (layers): 1
+Extra Shells on Base (layers): 1
+Extra Shells on Sparse Layer (layers): 1
+Grid Extra Overlap (ratio): 0.005
+Grid Junction Separation Band Height (layers): 10
+Grid Junction Separation over Octogon Radius At End (ratio): 0.0
+Grid Junction Separation over Octogon Radius At Middle (ratio): 0.0
+Open File to be Filled
+Infill Begin Rotation (degrees): 45.0
+Infill Begin Rotation Repeat (layers): 1
+Infill Solidity (ratio): 0.6
+Infill Odd Layer Extra Rotation (degrees): 90.0
+Grid Hexagonal False
+Grid Rectangular True
+Line False
+Interior Infill Density over Exterior Density (ratio): 0.9
+Outside Extruded First True
+Solid Surface Thickness (layers): 2
+windowPositionBehold Preferences 0+0
12 fillet.csv
@@ -0,0 +1,12 @@
+Format is tab separated preferences.
+Activate Fillet True
+Arc Point False
+Arc Radius False
+Arc Segment False
+Bevel True
+Corner Feedrate over Operating Feedrate (ratio): 1.0
+Fillet Radius over Extrusion Width (ratio): 0.35
+Open File to be Filleted
+Reversal Slowdown Distance over Extrusion Width (ratio): 0.5
+Use Intermediate Feedrate in Corners False
+windowPositionBehold Preferences 0+0
6 hop.csv
@@ -0,0 +1,6 @@
+Format is tab separated preferences.
+Activate Hop False
+Open File to be Hopped
+Hop Over Layer Thickness (ratio): 1.0
+Minimum Hop Angle (degrees): 20.0
+windowPositionBehold Preferences 0+0
8 inset.csv
@@ -0,0 +1,8 @@
+Format is tab separated preferences.
+Extrusion Perimeter Width over Thickness (ratio): 1.3
+Open File to be Insetted
+Infill Perimeter Overlap (ratio): 0.15
+Calculate Overlap from Perimeter and Infill True
+Calculate Overlap from Perimeter Only False
+Start at Home True
+windowPositionBehold Preferences 0+0
4 material.csv
@@ -0,0 +1,4 @@
+Format is tab separated preferences.
+Material List: ABS HDPE PCL PLA
+Material Selection: ABS
+windowPositionBehold Preferences 0+0
9 multiply.csv
@@ -0,0 +1,9 @@
+Format is tab separated preferences.
+Activate Multiply: True
+Center X (millimeters): 0.0
+Center Y (millimeters): 0.0
+Open File to be Multiplied
+Number of Columns (integer): 1
+Number of Rows (integer): 1
+Separation over Extrusion Width (ratio): 10.0
+windowPositionBehold Preferences 0+0
12 oozebane.csv
@@ -0,0 +1,12 @@
+Format is tab separated preferences.
+Activate Oozebane True
+After Startup Distance (millimeters): 0.275
+Early Shutdown Distance (millimeters): 0.2
+Early Startup Distance Constant (millimeters): 20.0
+Early Startup Maximum Distance (millimeters): 5.25
+First Early Startup Distance (millimeters): 20.0
+Open File to be Oozebaned
+Minimum Distance for Early Startup (millimeters): 0.01
+Minimum Distance for Early Shutdown (millimeters): 1.0
+Slowdown Startup Steps (positive integer): 1
+windowPositionBehold Preferences 0+0
4 polyfile.csv
@@ -0,0 +1,4 @@
+Format is tab separated preferences.
+Execute All Unmodified Files in a Directory False
+Execute File True
+windowPositionBehold Preferences 0+0
33 raft_ABS.csv
@@ -0,0 +1,33 @@
+Format is tab separated preferences.
+Activate Raft: True
+Add Raft, Elevate Nozzle, Orbit and Set Altitude: True
+Base Infill Density (ratio): 0.5
+Base Layer Thickness over Layer Thickness: 1.0
+Base Layers (integer): 1
+Base Nozzle Lift over Half Base Layer Thickness (ratio): 0.4
+Bottom Altitude: 0.1
+Open File to be Rafted
+Infill Overhang (ratio): 0.1
+Interface Infill Density (ratio): 0.5
+Interface Layer Thickness over Layer Thickness: 0.8
+Interface Layers (integer): 1
+Interface Nozzle Lift over Half Interface Layer Thickness (ratio): 0.5
+Operating Nozzle Lift over Half Layer Thickness (ratio): 1.0
+Raft Outset Radius over Extrusion Width (ratio): 7.5
+Support Inset over Perimeter Extrusion Width (ratio): 0.0
+No Support Material True
+Support Material Everywhere False
+Support Material on Exterior Only False
+Support Minimum Angle (degrees): 60.0
+Temperature Change Time Before Raft (seconds): 0.0
+Temperature Change Time Before First Layer Outline (seconds): 0.0
+Temperature Change Time Before Next Threads (seconds): 0.0
+Temperature Change Time Before Support Layers (seconds): 0.0
+Temperature Change Time Before Supported Layers (seconds): 0.0
+Temperature of Raft (Celcius): 230.0
+Temperature of Shape First Layer Outline (Celcius): 215.0
+Temperature of Shape First Layer Within (Celcius): 215.0
+Temperature of Shape Next Layers (Celcius): 220.0
+Temperature of Support Layers (Celcius): 220.0
+Temperature of Supported Layers (Celcius): 220.0
+windowPositionRaft Preferences 0+0
3 skeinforge.csv
@@ -0,0 +1,3 @@
+Format is tab separated preferences.
+Open File to be Skeinforged /Users/russ/Downloads/insulator_retainer_built_from_dxf_file.stl
+windowPositionBehold Preferences 0+0
9 skeinview.csv
@@ -0,0 +1,9 @@
+Format is tab separated preferences.
+Activate Skeinview True
+Draw Arrows True
+Open File to Skeinview
+Go Around Extruder Off Travel False
+Pixels over Extrusion Width (ratio): 10.0
+Screen Horizontal Inset (pixels): 100
+Screen Vertical Inset (pixels): 100
+windowPositionBehold Preferences 0+0
16 speed.csv
@@ -0,0 +1,16 @@
+Format is tab separated preferences.
+Activate Speed: True
+Bridge Feedrate Multiplier (ratio): 1.0
+Extrusion Diameter over Thickness (ratio): 1.3
+Feedrate (mm/s): 25.0
+Open File to be Speeded
+Do Not Add Flowrate False
+Metric False
+PWM Setting True
+Flowrate PWM Setting (if PWM Setting is Chosen): 255.0
+Orbital Feedrate over Operating Feedrate (ratio): 1.0
+Perimeter Feedrate over Operating Feedrate (ratio): 1.0
+Perimeter Flowrate over Operating Flowrate (ratio): 1.0
+Support Flowrate over Operating Flowrate (ratio): 1.0
+Travel Feedrate (mm/s): 55.0
+windowPositionBehold Preferences 0+0
6 statistic.csv
@@ -0,0 +1,6 @@
+Format is tab separated preferences.
+Activate Statistic True
+Open File to Generate Statistics for
+Print Statistics True
+Save Statistics False
+windowPositionBehold Preferences 0+0
8 stretch.csv
@@ -0,0 +1,8 @@
+Format is tab separated preferences.
+Activate Stretch False
+Loop Stretch Over Extrusion Width (ratio): 0.15
+Path Stretch Over Extrusion Width (ratio): 0.0
+Open File to be Stretched
+Stretch From Distance Over Extrusion Width (ratio): 2.0
+Perimeter Maximum Stretch Over Extrusion Width (ratio): 0.3
+windowPositionBehold Preferences 0+0
7 tower.csv
@@ -0,0 +1,7 @@
+Format is tab separated preferences.
+Activate Tower False
+Extruder Possible Collision Cone Angle (degrees): 60.0
+Open File to be Towered
+Maximum Tower Height (layers): 10
+Tower Start Layer (integer): 2
+windowPositionBehold Preferences 0+0
6 unpause.csv
@@ -0,0 +1,6 @@
+Format is tab separated preferences.
+Activate Unpause False
+Delay (milliseconds): 28.0
+Open File to be Unpaused
+Maximum Speed (ratio): 1.5
+windowPositionBehold Preferences 0+0
6 vectorwrite.csv
@@ -0,0 +1,6 @@
+Format is tab separated preferences.
+Activate Vectorwrite False
+Open File to Write Vector Graphics for
+Minimum Number of Layers for Multiple Files (integer): 10
+Pixels over Extrusion Width (ratio): 5.0
+windowPositionBehold Preferences 0+0
14 wipe.csv
@@ -0,0 +1,14 @@
+Format is tab separated preferences.
+Activate Wipe False
+Open File to be Wiped
+Location Arrival X (mm): -70.0
+Location Arrival Y (mm): -50.0
+Location Arrival Z (mm): 50.0
+Location Departure X (mm): -70.0
+Location Departure Y (mm): -40.0
+Location Departure Z (mm): 50.0
+Location Wipe X (mm): -70.0
+Location Wipe Y (mm): -70.0
+Location Wipe Z (mm): 50.0
+Wipe Period (layers): 3
+windowPositionBehold Preferences 0+0

0 comments on commit 14f0fa2

Please sign in to comment.
Something went wrong with that request. Please try again.