Skip to content
Permalink
Browse files

Fix up README grammar and spelling

  • Loading branch information...
PopeRigby authored and lpereira committed Oct 29, 2019
1 parent 5341996 commit 461110b6470d2ffc7d93579b207a8fe28e92640a
Showing with 16 additions and 16 deletions.
  1. +16 −16 README.md
@@ -2,7 +2,7 @@ HARDINFO
========

HardInfo is a system profiler and benchmark for Linux systems. It is able to
obtain information from both hardware and basic software, and organize them
obtain information from both hardware and basic software, and organize it
in a simple to use GUI.

Features include:
@@ -13,9 +13,9 @@ Features include:
Status
------

Capabilities: Hardinfo currently decteds software and detected hardware by the OS, mostly almost all.
Features: the remote sync was disable due server was lost
Development: currently are made by contribution, a stable and fixed/dedicated maintainer are required.
Capabilities: HardInfo currently detects most software and hardware detected by the OS.
Features: The remote sync was disabled due to server loss.
Development: Currently done by contributors, a new dedicated maintainer is needed.

DEPENDENCIES
------------
@@ -42,26 +42,26 @@ Create a build directory and build from there:

There are some variables that can be changed:

* `CMAKE_BUILD_TYPE` : Can be either Release or Debug
* `[Default: Release]` Debug builds prints messages to console and are not recommended for general use
* `CMAKE_INSTALL_PREFIX` : Sets the installation prefix.
* `[Default: /usr/local]` : distributions generalli changes to `/usr`
* `HARDINFO_NOSYNC` : Disables network synchronization
* `[Default: 1]` : Disabled by default due the server service was lost.
* `CMAKE_BUILD_TYPE`: Can either be ``Release`` or ``Debug``.
* `[Default: Release]` ``Debug`` prints messages to console and is not recommended for general use.
* `CMAKE_INSTALL_PREFIX`: Sets the installation prefix.
* `[Default: /usr/local]`: Distributions usually change this to `/usr`.
* `HARDINFO_NOSYNC`: Disables network synchronization.
* `[Default: 1]`: Disabled by default due to the server being lost.

To set a variable, pass use cmake's -D command-line parameter. For example:
To set a variable, use cmake's -D parameter. For example:

` build $ cmake .. -DCMAKE_BUILD_TYPE=Debug `

Network sync are enabled if libsoup are detected, if having trouble building with libsoup, disable it with:
Network sync is enabled if libsoup is detected. If having trouble building with libsoup, disable it with:

` build $ cmake -DHARDINFO_NOSYNC=1`

SETTING UP
----------

Most things in HardInfo are detected automatically. However, some things
depends on manual set up. They are:
Most hardware is detected automatically by HardInfo, however, some hardware
needs manual set up. They are:

### Sensors

@@ -74,5 +74,5 @@ in daemon mode, using the default port.

### Memory Speed

The module `eeeprom` mus be loaded to display info about memory hardware instaled.
Load with `modprobe eeprom` and refres the module screen.
The module `eeprom` must be loaded to display info about your currently installed memory.
Load with `modprobe eeprom` and refresh the module screen.

0 comments on commit 461110b

Please sign in to comment.
You can’t perform that action at this time.