From 82109772bfe3e0774c8399c9d07181fc96fbfcbe Mon Sep 17 00:00:00 2001 From: Rafal Chlodnicki Date: Mon, 5 Jan 2026 21:47:31 +0100 Subject: [PATCH] more notes about angle connector --- README.md | 6 +++++- TagTuner-D1.md | 4 ++++ 2 files changed, 9 insertions(+), 1 deletion(-) diff --git a/README.md b/README.md index 627e887..ae54439 100644 --- a/README.md +++ b/README.md @@ -90,8 +90,12 @@ Built-in LED is used as confirmation light. Print the led peg with clear filamen (TODO: XIAO front plate LED) ![IMG_2940](https://github.com/user-attachments/assets/e50b129d-66d2-4ead-8c5c-6e190eb7a39f) -I preffer soldering the grove angle connector to the PN532 NFC board +I prefer soldering the grove angle connector to the PN532 NFC board ![CA3A603C-CE5B-4982-AF24-9E40D3E554C2_1_201_a](https://github.com/user-attachments/assets/977e082d-af23-4d34-a981-68bd14b8df44) + +Just use the force ;-) +![528C987E-321C-4D8D-81F6-45F3D853613B_1_201_a](https://github.com/user-attachments/assets/248ef825-9c18-4447-9822-559ca3267cb7) + Remember to set the DIP switches to 10 to enable I2C. Correct switches position for I2c is marked by yellow lines. Everything will fit into the enclosure. diff --git a/TagTuner-D1.md b/TagTuner-D1.md index 23796cd..f8c0083 100644 --- a/TagTuner-D1.md +++ b/TagTuner-D1.md @@ -44,6 +44,10 @@ Built-in LED is used as confirmation light. Print the led peg with clear filamen I preffer soldering the [grove angle connector](https://s.click.aliexpress.com/e/_DDF07mN) to the [PN532 NFC](https://s.click.aliexpress.com/e/_De8uw89) board ![CA3A603C-CE5B-4982-AF24-9E40D3E554C2_1_201_a](https://github.com/user-attachments/assets/977e082d-af23-4d34-a981-68bd14b8df44) + +Just use the force ;-) +![528C987E-321C-4D8D-81F6-45F3D853613B_1_201_a](https://github.com/user-attachments/assets/248ef825-9c18-4447-9822-559ca3267cb7) + Remember to set the DIP switches to 10 to enable I2C. Correct position for I2c is marked by yellow lines. Everything will fit into the enclosure.