Skip to content
This repository

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
Browse code

Merge branch 'master' of git@github.com:lukeweston/Pebble

  • Loading branch information...
commit 1e31651554c91c5c9ba43d6ce6443e7861aa5dbd 2 parents 3977aac + ae0401a
lukeweston authored
81 README.markdown
Source Rendered
... ... @@ -1,4 +1,3 @@
1   -
2 1 General purpose Arduino sensor/LCD shield
3 2 -----------------------------------------
4 3
@@ -46,38 +45,50 @@ Arduino pin assignments:
46 45 Parts List / Bill of Materials:
47 46 -------------------------------
48 47
49   - R1-R5: 6 x 100 k, SMD 0805.
50   - R6: 4.7 k, SMD 0805.
51   - R7: 69 R, SMD 0805.
52   -
53   - VR1: 100 k linear pot, 9 mm metric, PCB mounting; eg. Jaycar RP-8518.
54   - VR2: 100 k linear pot, Spectrol 25-turn 0.1" pitch PCB mount; eg. Jaycar RT-4656.
55   -
56   - C1-C2: 2 x 100 nF SMD 0805.
57   -
58   - LCD1: 16x2 alphanumeric LCD module; Jaycar Electronics QP-5516 is suitable.
59   - LED1: 3 mm through-hole LED, green (or whatever colour you like); eg. Jaycar ZD-0120.
60   - LDR1: Cadmium sulfide light-dependent resistor; eg. Jaycar RD-3480.
61   -
62   - IC1: 4094 shift register; SMD SOIC package; eg. Rockby Electronics Stock no. 34707.
63   - IC2: DS18B20 1-Wire temperature sensor, TO-92 package; eg. Digi-Key DS18B20+-ND.
64   - IC3: LM1117-3.3 3.3 V voltage regulator, SOT-223 SMD package; Digi-Key LM1117MP-3.3CT-ND.
65   - IC4: XBee RF communication module (choose whichever specific type you like)
66   -
67   - RY1-RY2: 2 x reed relay, 5 V coil, DIP 0.3" package; eg. Jaycar SY-4030.
68   - S1-S2: 2 x normally-open momentary pushbutton switch, 4 pins; eg. Jaycar SP-0720.
69   -
70   - (Choose whatever colour you like. Personally, I don't like the "feel" of the
71   - Jaycar SP-0720 style switches; they seem a bit "sticky". I personally prefer to
72   - use something like the (Jaycar) SP-0600 style of switch, as they seem to have a
73   - better tactile response which isn't "sticky". But then again, they are not big and
74   - round and brightly coloured.)
75   -
76   - 14-pin DIL (2 x 7) 0.1" female header socket strip; for mounting LCD; Digi-Key S7075-ND.
77   - 2 x 10 pin, 2 mm female SIL header sockets to suit XBee module; eg. Digi-Key S5751-10-ND.
78   - 4-pin 0.1" Phoenix PCB-mount screw-down terminal block; eg. Digi-Key 277-1275-ND.
79   - 28-way male 0.1" break-away pin header or wire-wrap socket strip; eg. Jaycar PI-6472.
80   - 14-pin DIL (2 x 7) 0.1" break-away pin header strip for mounting LCD; Jaycar HM-3250.
81   - Solid-core wire (eg. 0.7 mm tinned copper wire) for making wire links on PCB.
82   -
83 48
  49 + 1 x XBee module (optional) (choose whichever specific kind you like)
  50 +
  51 + 1 x 20x4 alphanumeric LCD display module
  52 +
  53 + 1 x Dallas DS18B20 1-Wire temperature sensor, TO-92 package
  54 + (eg. Digi-Key DS18B20+PAR-ND)
  55 +
  56 + 1 x LD1117V33C 3.3V low-dropout voltage regulator, TO-220 package.
  57 + (eg. Digi-Key 497-1492-5-ND) (optional if XBee is not used.)
  58 +
  59 + 1 x 4094 shift register IC, 16 pin DIP package.
  60 + eg. Digi-Key 568-4484-5-ND; Jaycar ZC4094.
  61 +
  62 + 2 x 5V reed relays, DIP package, eg. Jaycar SY4030, Digi-Key HE100-ND
  63 +
  64 + 1 x light-dependant resistor, eg. Jaycar RD3480
  65 +
  66 + 1 x 100k linear pot, eg. Jaycar RP8518
  67 +
  68 + 1 x 100k linear trimpot, Jaycar RT4366
  69 +
  70 + 1 x 6-pin 2.54 mm Phoenix screw terminal wire-to-board connector
  71 + eg. Digi-Key 277-1277-ND (optional)
  72 +
  73 + 4 x momentary pushbutton switches, eg. Digi-Key EG1861-ND
  74 + (Button/cap to suit above Digi-Key part: Digi-Key EG4364-ND)
  75 +
  76 + 1 x 3 mm through-hole LED, colour to taste.
  77 +
  78 + 2 x 1N4004 diodes, eg. Jaycar ZR1004.
  79 +
  80 + 2 x 100 nF monolithic capacitor, 5.08 mm pitch, through hole.
  81 + eg. Digi-Key 478-3193-ND, Jaycar RC5490 (optional if XBee is not used.)
  82 +
  83 + Resistors: (all standard 1/4W through-hole resistors):
  84 + 1 x 4k7
  85 + 1 x 69R
  86 + 6 x 100k
  87 +
  88 + 3 x 16 pin IC sockets (optional)
  89 + 2 x 16-pin 0.1" female header socket strip, for LCD
  90 + 1 x 40-way 0.1" break-away pin header strip
  91 + 1 x 28-way 0.1" break-away pin header strip
  92 +
  93 + 2 x 10-pin 2 mm female header sockets, eg. Digi-Key S5751-10-ND
  94 + (optional if XBee is not used.)
BIN  design_1.0/ArduinoSensorLCDShield_Design.doc
Binary file not shown
BIN  design_1.0/ArduinoSensorLCDShield_Design.jpg
0  SensorLCDShieldTest.pde → prototype/SensorLCDShieldTest.pde
File renamed without changes
0  sensor-LCD-shield.brd → prototype/sensor-LCD-shield.brd
File renamed without changes
0  sensor-LCD-shield.sch → prototype/sensor-LCD-shield.sch
File renamed without changes

0 comments on commit 1e31651

Please sign in to comment.
Something went wrong with that request. Please try again.