SEGmeter 2.0
Switch branches/tags
Nothing to show
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Failed to load latest commit information.
Gerbers
SEGmeter20XBeeShield
ShieldGerbers
AnalogInput.sch
AnalogInputSchematic.png
README.markdown
SEGmeter20.brd
SEGmeter20.pdf
SEGmeter20.sch
SEGmeter20BOM.txt
SEGmeter20PCB.png
SEGmeter20schematic.png
SEGmeterShield.brd
SEGmeterShield.sch
SEGmeterShieldBoard.png
SEGmeterShieldSchematic.png

README.markdown

	Board dimensions = 4500 x 3475 thou. = 114.3 mm x 88.3 mm

	SEGmeter 2.0:

	Arduino-equivalent pin assignments:

	0: Serial RX to AVR
	1: Serial TX from AVR.
	2: Spare, not used.
	3: Status indicator LED output.
	4: Pushbutton control input.
	5: OneWire sensor bus.
	6: Relay output 1.
	7: Relay output 2.
	8: Relay output 3.
	9: SPI chip select for ADC.
	10: Spare, not used. SPI chip select for ADC on expansion board.
	11: SPI MOSI
	12: SPI MISO
	13: SPI clock

	A0: Spare, not used.
	A1: Spare, not used.
	A2: Spare, not used.
	A3: Spare, not used.
	A4: Spare, not used.
	A5: Spare, not used.