Sonatino Examples

This repository contains sample code for the Sonatino audio development board.

Documentation for Sonatino can be found here.

Note: For board revisions prior to 3.x.x, use the examples in the v2.x.x folder. Your revision number can be found on the bottom side of the board.

---

Included Example Projects:

Name	Environment	Description
playback	Arduino IDE	Demonstrates how to play an MP3 file
processing	Arduino IDE	Demonstrates real-time audio processing with a basic reverb effect
recording	Arduino IDE	Demonstrates recording audio to a microSD card
streaming	PlatformIO	Demonstrates receiving an audio stream over WiFi

Running The Examples

Each example project is designed to run in a specific environment. The following instructions will guide you through running the examples in the respective environments.

• Arduino IDE Projects

  • To run an example, open the .ino file with Arduino IDE, connect Sonatino using a USB-C cable, and press Upload.
  • Note: You'll need to first install Arduino-ESP32 and the ESP8266Audio library if you haven't already done so.

• PlatformIO Projects

  • Open the folder containing the example in PlatformIO, and it should install the necessary libraries and platform (espressif32). Connect Sonatino using a USB-C cable, then build and upload the project.

---

For more information, refer to the Getting Started section of the Sonatino documentation.