-
Notifications
You must be signed in to change notification settings - Fork 603
Open
Description
Hi everyone.
I'm trying to connect my HiveOS rig using the 802.11n dongle (this guy) but without success. I've read almost every thread in the wi-fi setup (also, usually the 802.11n seems to work) but I was not able to make it work.
The problem is the following:
In HiveOS we can setup the wifi with the following command:
wifi
In my rig's terminal, I got the following error:
=== WiFi setup ===
Failed to bring up wlan0: SIOCSIFFLAGS: Operation not permitted
wlan0 unassociated ESSID="" Nickname:"<WIFI@REALTEK>"
Mode: Auto Frequency=2.412GHz Access Point: Not-Associated
Sensitivity:0/0
Retry:off RTS the:off Fragment the:off
Encryption key:off
Power Management:off
Link Quality=0/100 Signal level=0 dBm Noise level=0 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
● 3: wlan0
Link File: /lib/systemd/network/99-default.link
Network File: /etc/systemd/network/30-wireless.network
Type: wlan
State: off (configuring)
Path: pci-0000:00:14.0-usb-0:9:1.0
Driver: r8188eu
Vendor: Realtek Semiconductor Corp.
Model: 802.11n
HW Address: 00:e0:4c:81:88:02 (REALTEK SEMICONDUCTOR CORP.)
...
The wlan0 appears in my iwconfig but not in ifconfig
I've already tried to reinstall the r8188eu driver, but with no success.
The same error happens if I try to run:
ifconfig wlan0 up
This is the output of that command:
SIOCSIFFLAGS: Operation not permitted
I've tried to do a complete reinstall following this repository README steps. The installation went smoothly, but the issue persists.
Any ideas how to fix this?
Metadata
Metadata
Assignees
Labels
No labels