Merge branch 'master' of git://github.com/github/linux-2.6

Documentation/DocBook/libata.tmpl

@@ -107,10 +107,6 @@ void (*dev_config) (struct ata_port *, struct ata_device *);
 	issue of SET FEATURES - XFER MODE, and prior to operation.
 	</para>
 	<para>
-	Called by ata_device_add() after ata_dev_identify() determines
-	a device is present.
-	</para>
-	<para>
 	This entry may be specified as NULL in ata_port_operations.
 	</para>
 
@@ -154,8 +150,8 @@ unsigned int (*mode_filter) (struct ata_port *, struct ata_device *, unsigned in
 
 	<sect2><title>Taskfile read/write</title>
 	<programlisting>
-void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
-void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
 	</programlisting>
 
 	<para>
@@ -164,36 +160,35 @@ void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
 	hardware registers / DMA buffers, to obtain the current set of
 	taskfile register values.
 	Most drivers for taskfile-based hardware (PIO or MMIO) use
-	ata_tf_load() and ata_tf_read() for these hooks.
+	ata_sff_tf_load() and ata_sff_tf_read() for these hooks.
 	</para>
 
 	</sect2>
 
 	<sect2><title>PIO data read/write</title>
 	<programlisting>
-void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
+void (*sff_data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
 	</programlisting>
 
 	<para>
 All bmdma-style drivers must implement this hook.  This is the low-level
 operation that actually copies the data bytes during a PIO data
 transfer.
-Typically the driver
-will choose one of ata_pio_data_xfer_noirq(), ata_pio_data_xfer(), or
-ata_mmio_data_xfer().
+Typically the driver will choose one of ata_sff_data_xfer_noirq(),
+ata_sff_data_xfer(), or ata_sff_data_xfer32().
 	</para>
 
 	</sect2>
 
 	<sect2><title>ATA command execute</title>
 	<programlisting>
-void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
 	</programlisting>
 
 	<para>
 	causes an ATA command, previously loaded with
 	->tf_load(), to be initiated in hardware.
-	Most drivers for taskfile-based hardware use ata_exec_command()
+	Most drivers for taskfile-based hardware use ata_sff_exec_command()
 	for this hook.
 	</para>
 
@@ -218,29 +213,23 @@ command.
 
 	<sect2><title>Read specific ATA shadow registers</title>
 	<programlisting>
-u8   (*check_status)(struct ata_port *ap);
-u8   (*check_altstatus)(struct ata_port *ap);
+u8   (*sff_check_status)(struct ata_port *ap);
+u8   (*sff_check_altstatus)(struct ata_port *ap);
 	</programlisting>
 
 	<para>
 	Reads the Status/AltStatus ATA shadow register from
 	hardware.  On some hardware, reading the Status register has
 	the side effect of clearing the interrupt condition.
 	Most drivers for taskfile-based hardware use
-	ata_check_status() for this hook.
-	</para>
-	<para>
-	Note that because this is called from ata_device_add(), at
-	least a dummy function that clears device interrupts must be
-	provided for all drivers, even if the controller doesn't
-	actually have a taskfile status register.
+	ata_sff_check_status() for this hook.
 	</para>
 
 	</sect2>
 
 	<sect2><title>Select ATA device on bus</title>
 	<programlisting>
-void (*dev_select)(struct ata_port *ap, unsigned int device);
+void (*sff_dev_select)(struct ata_port *ap, unsigned int device);
 	</programlisting>
 
 	<para>
@@ -251,9 +240,7 @@ void (*dev_select)(struct ata_port *ap, unsigned int device);
 	</para>
 	<para>
 	Most drivers for taskfile-based hardware use
-	ata_std_dev_select() for this hook.  Controllers which do not
-	support second drives on a port (such as SATA contollers) will
-	use ata_noop_dev_select().
+	ata_sff_dev_select() for this hook.
 	</para>
 
 	</sect2>
@@ -441,13 +428,13 @@ void (*irq_clear) (struct ata_port *);
 	to struct ata_host_set.
 	</para>
 	<para>
-	Most legacy IDE drivers use ata_interrupt() for the
+	Most legacy IDE drivers use ata_sff_interrupt() for the
 	irq_handler hook, which scans all ports in the host_set,
 	determines which queued command was active (if any), and calls
-	ata_host_intr(ap,qc).
+	ata_sff_host_intr(ap,qc).
 	</para>
 	<para>
-	Most legacy IDE drivers use ata_bmdma_irq_clear() for the
+	Most legacy IDE drivers use ata_sff_irq_clear() for the
 	irq_clear() hook, which simply clears the interrupt and error
 	flags in the DMA status register.
 	</para>
@@ -496,10 +483,6 @@ void (*host_stop) (struct ata_host_set *host_set);
 	data from port at this time.
 	</para>
 	<para>
-	Many drivers use ata_port_stop() as this hook, which frees the
-	PRD table.
-	</para>
-	<para>
 	->host_stop() is called after all ->port_stop() calls
 have completed.  The hook must finalize hardware shutdown, release DMA
 and other resources, etc.

drivers/ata/pata_pcmcia.c

@@ -424,7 +424,7 @@ static struct pcmcia_device_id pcmcia_devices[] = {
 	PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
 	PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
 	PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
-	PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x3e520e17),
+	PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x55d5bffb),
 	PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 4GB", 0x2e6d1829, 0x531e7d10),
 	PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
 	PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2      ", 0x547e66dc, 0x8671043b),
@@ -446,7 +446,7 @@ static struct pcmcia_device_id pcmcia_devices[] = {
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
-	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x9351e59d),
+	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x7558f133),
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS8GCF133", 0x709b1bf1, 0xb2f89b47),
 	PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
 	PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918),

drivers/ide/ide-cs.c

@@ -409,7 +409,7 @@ static struct pcmcia_device_id ide_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
 	PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
 	PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
-	PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x3e520e17),
+	PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x55d5bffb),
 	PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 4GB", 0x2e6d1829, 0x531e7d10),
 	PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
 	PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2      ", 0x547e66dc, 0x8671043b),
@@ -431,7 +431,7 @@ static struct pcmcia_device_id ide_ids[] = {
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
-	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x9351e59d),
+	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x7558f133),
 	PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS8GCF133", 0x709b1bf1, 0xb2f89b47),
 	PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
 	PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918),

mm/slub.c

@@ -2153,7 +2153,7 @@ static int init_kmem_cache_nodes(struct kmem_cache *s, gfp_t gfpflags)
 	int local_node;
 
 	if (slab_state >= UP && (s < kmalloc_caches ||
-			s > kmalloc_caches + KMALLOC_CACHES))
+			s >= kmalloc_caches + KMALLOC_CACHES))
 		local_node = page_to_nid(virt_to_page(s));
 	else
 		local_node = 0;

security/keys/keyring.c

@@ -20,6 +20,11 @@
 #include <asm/uaccess.h>
 #include "internal.h"
 
+#define rcu_dereference_locked_keyring(keyring)				\
+	(rcu_dereference_protected(					\
+		(keyring)->payload.subscriptions,			\
+		rwsem_is_locked((struct rw_semaphore *)&(keyring)->sem)))
+
 /*
  * when plumbing the depths of the key tree, this sets a hard limit set on how
  * deep we're willing to go
@@ -201,8 +206,7 @@ static long keyring_read(const struct key *keyring,
 	int loop, ret;
 
 	ret = 0;
-	klist = keyring->payload.subscriptions;
-
+	klist = rcu_dereference_locked_keyring(keyring);
 	if (klist) {
 		/* calculate how much data we could return */
 		qty = klist->nkeys * sizeof(key_serial_t);
@@ -526,9 +530,8 @@ struct key *find_keyring_by_name(const char *name, bool skip_perm_check)
 	struct key *keyring;
 	int bucket;
 
-	keyring = ERR_PTR(-EINVAL);
 	if (!name)
-		goto error;
+		return ERR_PTR(-EINVAL);
 
 	bucket = keyring_hash(name);
 
@@ -555,17 +558,18 @@ struct key *find_keyring_by_name(const char *name, bool skip_perm_check)
 					   KEY_SEARCH) < 0)
 				continue;
 
-			/* we've got a match */
-			atomic_inc(&keyring->usage);
-			read_unlock(&keyring_name_lock);
-			goto error;
+			/* we've got a match but we might end up racing with
+			 * key_cleanup() if the keyring is currently 'dead'
+			 * (ie. it has a zero usage count) */
+			if (!atomic_inc_not_zero(&keyring->usage))
+				continue;
+			goto out;
 		}
 	}
 
-	read_unlock(&keyring_name_lock);
 	keyring = ERR_PTR(-ENOKEY);
-
- error:
+out:
+	read_unlock(&keyring_name_lock);
 	return keyring;
 
 } /* end find_keyring_by_name() */
@@ -720,8 +724,7 @@ int __key_link(struct key *keyring, struct key *key)
 	}
 
 	/* see if there's a matching key we can displace */
-	klist = keyring->payload.subscriptions;
-
+	klist = rcu_dereference_locked_keyring(keyring);
 	if (klist && klist->nkeys > 0) {
 		struct key_type *type = key->type;
 
@@ -765,8 +768,6 @@ int __key_link(struct key *keyring, struct key *key)
 	if (ret < 0)
 		goto error2;
 
-	klist = keyring->payload.subscriptions;
-
 	if (klist && klist->nkeys < klist->maxkeys) {
 		/* there's sufficient slack space to add directly */
 		atomic_inc(&key->usage);
@@ -868,7 +869,7 @@ int key_unlink(struct key *keyring, struct key *key)
 
 	down_write(&keyring->sem);
 
-	klist = keyring->payload.subscriptions;
+	klist = rcu_dereference_locked_keyring(keyring);
 	if (klist) {
 		/* search the keyring for the key */
 		for (loop = 0; loop < klist->nkeys; loop++)
@@ -959,7 +960,7 @@ int keyring_clear(struct key *keyring)
 		/* detach the pointer block with the locks held */
 		down_write(&keyring->sem);
 
-		klist = keyring->payload.subscriptions;
+		klist = rcu_dereference_locked_keyring(keyring);
 		if (klist) {
 			/* adjust the quota */
 			key_payload_reserve(keyring,
@@ -991,7 +992,9 @@ EXPORT_SYMBOL(keyring_clear);
  */
 static void keyring_revoke(struct key *keyring)
 {
-	struct keyring_list *klist = keyring->payload.subscriptions;
+	struct keyring_list *klist;
+
+	klist = rcu_dereference_locked_keyring(keyring);
 
 	/* adjust the quota */
 	key_payload_reserve(keyring, 0);
@@ -1025,7 +1028,7 @@ void keyring_gc(struct key *keyring, time_t limit)
 
 	down_write(&keyring->sem);
 
-	klist = keyring->payload.subscriptions;
+	klist = rcu_dereference_locked_keyring(keyring);
 	if (!klist)
 		goto no_klist;
 

security/keys/request_key.c

@@ -94,7 +94,7 @@ static int call_sbin_request_key(struct key_construction *cons,
 	}
 
 	/* attach the auth key to the session keyring */
-	ret = __key_link(keyring, authkey);
+	ret = key_link(keyring, authkey);
 	if (ret < 0)
 		goto error_link;