Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with
or
.
Download ZIP
Branch: master
Fetching contributors…

Cannot retrieve contributors at this time

733 lines (646 sloc) 24.107 kB
# Rules.make for uClibc
#
# Copyright (C) 2000-2008 Erik Andersen <andersen@uclibc.org>
#
# Licensed under the LGPL v2.1, see the file COPYING.LIB in this tarball.
#
# make nano-doc
# FOO = bar -- recursively expanded variable. Value is remebered verbatim.
# If it contains references to other variables, these references
# are expanded whenever this variable is _substituted_.
# FOO := bar -- simply expanded variable. Right hand is expanded when
# the variable is _defined_. Therefore faster than =.
# FOO ?= bar -- set a value only if it is not already set
# (behaves as =, not :=).
# FOO += bar -- append; if FOO is not defined, acts like = (not :=).
# check for proper make version
ifneq ($(findstring x3.7,x$(MAKE_VERSION)),)
$(error Your make is too old $(MAKE_VERSION). Go get at least 3.80)
endif
#-----------------------------------------------------------
# This file contains rules which are shared between multiple
# Makefiles. All normal configuration options live in the
# file named ".config". Don't mess with this file unless
# you know what you are doing.
#-----------------------------------------------------------
# If you are running a cross compiler, you will want to set
# 'CROSS' to something more interesting ... Target
# architecture is determined by asking the CC compiler what
# arch it compiles things for, so unless your compiler is
# broken, you should not need to specify TARGET_ARCH.
#
# Most people will set this stuff on the command line, i.e.
# make CROSS=arm-linux-
# will build uClibc for 'arm'.
ifndef CROSS
CROSS=
endif
CC = $(CROSS)gcc
AR = $(CROSS)ar
LD = $(CROSS)ld
NM = $(CROSS)nm
OBJDUMP = $(CROSS)objdump
STRIPTOOL = $(CROSS)strip
INSTALL = install
LN = ln
RM = rm -f
TAR = tar
SED = sed
AWK = awk
STRIP_FLAGS ?= -x -R .note -R .comment
## unused? if yes, remove after 0.9.31
## UNIFDEF := $(top_builddir)extra/scripts/unifdef
# Select the compiler needed to build binaries for your development system
HOSTCC = gcc
BUILD_CFLAGS = -Os -Wall
#---------------------------------------------------------
# Nothing beyond this point should ever be touched by mere
# mortals. Unless you hang out with the gods, you should
# probably leave all this stuff alone.
# strip quotes
qstrip = $(strip $(subst ",,$(1)))
#"))
# Pull in the user's uClibc configuration
ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),)
-include $(top_builddir).config
endif
TARGET_ARCH:=$(call qstrip,$(TARGET_ARCH))
ifeq ($(TARGET_ARCH),)
ARCH ?= $(shell uname -m | $(SED) -e s/i.86/i386/ \
-e s/sun.*/sparc/ -e s/sparc.*/sparc/ \
-e s/arm.*/arm/ -e s/sa110/arm/ \
-e s/sh.*/sh/ \
-e s/s390x/s390/ -e s/parisc.*/hppa/ \
-e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
-e s/xtensa.*/xtensa/ )
else
ARCH = $(TARGET_ARCH)
endif
export ARCH
# Make certain these contain a final "/", but no "//"s.
TARGET_SUBARCH:=$(call qstrip,$(shell grep -s '^TARGET_SUBARCH' $(top_builddir)/.config | $(SED) -e 's/^TARGET_SUBARCH=//'))
TARGET_SUBARCH:=$(call qstrip,$(TARGET_SUBARCH))
RUNTIME_PREFIX:=$(strip $(subst //,/, $(subst ,/, $(call qstrip,$(RUNTIME_PREFIX)))))
DEVEL_PREFIX:=$(strip $(subst //,/, $(subst ,/, $(call qstrip,$(DEVEL_PREFIX)))))
MULTILIB_DIR:=$(strip $(subst //,/, $(subst ,/, $(call qstrip,$(MULTILIB_DIR)))))
KERNEL_HEADERS:=$(strip $(subst //,/, $(subst ,/, $(call qstrip,$(KERNEL_HEADERS)))))
export RUNTIME_PREFIX DEVEL_PREFIX KERNEL_HEADERS MULTILIB_DIR
# Now config hard core
MAJOR_VERSION := 0
MINOR_VERSION := 9
SUBLEVEL := 33
EXTRAVERSION :=-git
VERSION := $(MAJOR_VERSION).$(MINOR_VERSION).$(SUBLEVEL)
ABI_VERSION := $(MAJOR_VERSION)
ifneq ($(EXTRAVERSION),)
VERSION := $(VERSION)$(EXTRAVERSION)
endif
# Ensure consistent sort order, 'gcc -print-search-dirs' behavior, etc.
LC_ALL := C
export MAJOR_VERSION MINOR_VERSION SUBLEVEL VERSION ABI_VERSION LC_ALL
LIBC := libc
SHARED_LIBNAME := $(LIBC).so.$(ABI_VERSION)
UBACKTRACE_DSO := libubacktrace.so.$(MAJOR_VERSION)
ifneq ($(findstring $(TARGET_ARCH) , hppa64 ia64 mips64 powerpc64 s390x sparc64 x86_64 ),)
UCLIBC_LDSO_NAME := ld64-uClibc
ARCH_NATIVE_BIT := 64
else
UCLIBC_LDSO_NAME := ld-uClibc
ARCH_NATIVE_BIT := 32
endif
UCLIBC_LDSO := $(UCLIBC_LDSO_NAME).so.$(ABI_VERSION)
NONSHARED_LIBNAME := uclibc_nonshared.a
libc := $(top_builddir)lib/$(SHARED_LIBNAME)
libc.depend := $(top_builddir)lib/$(SHARED_LIBNAME:.$(ABI_VERSION)=)
ifneq ($(ARCH_HAS_NO_SHARED),y)
libdl.depend := $(top_builddir)lib/libdl.so
endif
ifneq ($(HAS_NO_THREADS),y)
libpthread.depend := $(top_builddir)lib/libpthread.so
endif
interp := $(top_builddir)lib/interp.os
ldso := $(top_builddir)lib/$(UCLIBC_LDSO)
headers_dep := $(top_builddir)include/bits/sysnum.h
sub_headers := $(headers_dep)
#LIBS :=$(interp) -L$(top_builddir)lib -lc
LIBS := $(interp) -L$(top_builddir)lib $(libc:.$(ABI_VERSION)=)
# Make sure DESTDIR and PREFIX can be used to install
# PREFIX is a uClibcism while DESTDIR is a common GNUism
ifndef PREFIX
PREFIX = $(DESTDIR)
endif
ifneq ($(HAVE_SHARED),y)
libc :=
interp :=
ldso :=
endif
comma:=,
space:= #
ifndef CROSS
CROSS=$(call qstrip,$(CROSS_COMPILER_PREFIX))
endif
# A nifty macro to make testing gcc features easier
check_gcc=$(shell \
if $(CC) $(1) -S -o /dev/null -xc /dev/null > /dev/null 2>&1; \
then echo "$(1)"; else echo "$(2)"; fi)
check_as=$(shell \
if $(CC) -Wa,$(1) -Wa,-Z -c -o /dev/null -xassembler /dev/null > /dev/null 2>&1; \
then echo "-Wa,$(1)"; fi)
check_ld=$(shell \
if $(LD) $(1) -o /dev/null -b binary /dev/null > /dev/null 2>&1; \
then echo "$(1)"; fi)
ARFLAGS:=cr
# Flags in OPTIMIZATION are used only for non-debug builds
OPTIMIZATION:=
# Use '-Os' optimization if available, else use -O2, allow Config to override
OPTIMIZATION+=$(call check_gcc,-Os,-O2)
# Use the gcc 3.4 -funit-at-a-time optimization when available
OPTIMIZATION+=$(call check_gcc,-funit-at-a-time,)
# shrinks code by about 0.1%
OPTIMIZATION+=$(call check_gcc,-fmerge-all-constants)
OPTIMIZATION+=$(call check_gcc,-fstrict-aliasing)
GCC_MAJOR_VER?=$(shell $(CC) -dumpversion | cut -d . -f 1)
#GCC_MINOR_VER?=$(shell $(CC) -dumpversion | cut -d . -f 2)
ifeq ($(GCC_MAJOR_VER),4)
# shrinks code, results are from 4.0.2
# 0.36%
OPTIMIZATION+=$(call check_gcc,-fno-tree-loop-optimize,)
# 0.34%
OPTIMIZATION+=$(call check_gcc,-fno-tree-dominator-opts,)
# 0.1%
OPTIMIZATION+=$(call check_gcc,-fno-strength-reduce,)
endif
# CPU_CFLAGS-y contain options which are not warnings,
# not include or library paths, and not optimizations.
# Why -funsigned-char: I hunted a bug related to incorrect
# sign extension of 'char' type for 10 hours straight. Not fun.
CPU_CFLAGS-y := -funsigned-char -fno-builtin
CPU_CFLAGS-y += $(call check_gcc,-fno-asm,)
LDADD_LIBFLOAT=
ifeq ($(UCLIBC_HAS_SOFT_FLOAT),y)
# If -msoft-float isn't supported, we want an error anyway.
# Hmm... might need to revisit this for arm since it has 2 different
# soft float encodings.
ifneq ($(TARGET_ARCH),nios)
ifneq ($(TARGET_ARCH),nios2)
ifneq ($(TARGET_ARCH),sh)
ifneq ($(TARGET_ARCH),c6x)
CPU_CFLAGS-y += -msoft-float
endif
endif
endif
endif
ifeq ($(TARGET_ARCH),arm)
# No longer needed with current toolchains, but leave it here for now.
# If anyone is actually still using gcc 2.95 (say), they can uncomment it.
# LDADD_LIBFLOAT=-lfloat
endif
endif
CPU_CFLAGS-y += $(call check_gcc,-std=gnu99,)
CPU_CFLAGS-$(UCLIBC_FORMAT_SHARED_FLAT) += -mid-shared-library
CPU_CFLAGS-$(UCLIBC_FORMAT_FLAT_SEP_DATA) += -msep-data
CPU_LDFLAGS-$(ARCH_LITTLE_ENDIAN) += -Wl,-EL
CPU_LDFLAGS-$(ARCH_BIG_ENDIAN) += -Wl,-EB
PICFLAG-y := -fPIC
PICFLAG-$(UCLIBC_FORMAT_FDPIC_ELF) := -mfdpic
PICFLAG-$(UCLIBC_FORMAT_DSBT_ELF) := -mdsbt -fpic
PICFLAG := $(PICFLAG-y)
PIEFLAG_NAME:=-fPIE
# Some nice CPU specific optimizations
ifeq ($(TARGET_ARCH),i386)
OPTIMIZATION+=$(call check_gcc,-fomit-frame-pointer,)
ifeq ($(CONFIG_386)$(CONFIG_486)$(CONFIG_586)$(CONFIG_586MMX),y)
# Non-SSE capable processor.
# NB: this may make SSE insns segfault!
# -O1 -march=pentium3, -Os -msse etc are known to be affected.
# See http://gcc.gnu.org/bugzilla/show_bug.cgi?id=13685
# -m32 is needed if host is 64-bit
OPTIMIZATION+=$(call check_gcc,-m32 -mpreferred-stack-boundary=2,)
else
OPTIMIZATION+=$(call check_gcc,-mpreferred-stack-boundary=4,)
endif
# Choice of alignment (please document why!)
# -falign-labels: in-line labels
# (reachable by normal code flow, aligning will insert nops
# which will be executed - may even make things slower)
# -falign-jumps: reachable only by a jump
# Generic: no alignment at all (smallest code)
GCC_FALIGN=$(call check_gcc,-falign-functions=1 -falign-jumps=1 -falign-labels=1 -falign-loops=1,-malign-jumps=1 -malign-loops=1)
ifeq ($(CONFIG_K7),y)
# Align functions to four bytes, use default for jumps and loops (why?)
GCC_FALIGN=$(call check_gcc,-falign-functions=4 -falign-labels=1,-malign-functions=4)
endif
ifeq ($(CONFIG_CRUSOE),y)
# Use compiler's default for functions, jumps and loops (why?)
GCC_FALIGN=$(call check_gcc,-falign-functions=0 -falign-labels=1,-malign-functions=0)
endif
ifeq ($(CONFIG_CYRIXIII),y)
# Use compiler's default for functions, jumps and loops (why?)
GCC_FALIGN=$(call check_gcc,-falign-functions=0 -falign-labels=1,-malign-functions=0)
endif
OPTIMIZATION+=$(GCC_FALIGN)
# Putting each function and data object into its own section
# allows for kbytes of less text if users link against static uclibc
# using ld --gc-sections.
# ld 2.18 can't do that (yet?) for shared libraries, so we itself
# do not use --gc-sections at shared lib link time.
# However, in combination with sections being sorted by alignment
# it does result in much reduced padding:
# text data bss dec hex
# 235319 1472 5992 242783 3b45f old.so
# 234104 1472 5980 241556 3af94 new.so
# Without -ffunction-sections, all functions will get aligned
# to 4 byte boundary by as/ld. This is arguably a bug in as.
# It specifies 4 byte align for .text even if not told to do so:
# Idx Name Size VMA LMA File off Algn
# 0 .text xxxxxxxx 00000000 00000000 xxxxxxxx 2**2 <===!
CPU_CFLAGS-y += $(call check_gcc,-ffunction-sections -fdata-sections,)
ifneq ($(call check_ld,--sort-common),)
CPU_LDFLAGS-y += -Wl,--sort-common
endif
ifneq ($(call check_ld,--sort-section alignment),)
CPU_LDFLAGS-y += -Wl,--sort-section,alignment
endif
CPU_LDFLAGS-y+=-m32
CPU_CFLAGS-y+=-m32
CPU_CFLAGS-$(CONFIG_386)+=-march=i386
CPU_CFLAGS-$(CONFIG_486)+=-march=i486
CPU_CFLAGS-$(CONFIG_ELAN)+=-march=i486
CPU_CFLAGS-$(CONFIG_586)+=-march=i586
CPU_CFLAGS-$(CONFIG_586MMX)+=$(call check_gcc,-march=pentium-mmx,-march=i586)
CPU_CFLAGS-$(CONFIG_686)+=-march=i686
CPU_CFLAGS-$(CONFIG_PENTIUMII)+=$(call check_gcc,-march=pentium2,-march=i686)
CPU_CFLAGS-$(CONFIG_PENTIUMIII)+=$(call check_gcc,-march=pentium3,-march=i686)
CPU_CFLAGS-$(CONFIG_PENTIUM4)+=$(call check_gcc,-march=pentium4,-march=i686)
CPU_CFLAGS-$(CONFIG_K6)+=$(call check_gcc,-march=k6,-march=i586)
CPU_CFLAGS-$(CONFIG_K7)+=$(call check_gcc,-march=athlon,-march=i686)
CPU_CFLAGS-$(CONFIG_CRUSOE)+=-march=i686
CPU_CFLAGS-$(CONFIG_WINCHIPC6)+=$(call check_gcc,-march=winchip-c6,-march=i586)
CPU_CFLAGS-$(CONFIG_WINCHIP2)+=$(call check_gcc,-march=winchip2,-march=i586)
CPU_CFLAGS-$(CONFIG_CYRIXIII)+=$(call check_gcc,-march=c3,-march=i486)
CPU_CFLAGS-$(CONFIG_NEHEMIAH)+=$(call check_gcc,-march=c3-2,-march=i686)
endif
ifeq ($(TARGET_ARCH),sparc)
CPU_CFLAGS-$(CONFIG_SPARC_V7)+=-mcpu=v7
CPU_CFLAGS-$(CONFIG_SPARC_V8)+=-mcpu=v8
CPU_CFLAGS-$(CONFIG_SPARC_V9)+=-mcpu=v9
CPU_CFLAGS-$(CONFIG_SPARC_V9B)+=$(call check_gcc,-mcpu=v9b,-mcpu=ultrasparc)
endif
ifeq ($(TARGET_ARCH),arm)
CPU_CFLAGS-$(ARCH_LITTLE_ENDIAN)+=-mlittle-endian
CPU_CFLAGS-$(ARCH_BIG_ENDIAN)+=-mbig-endian
CPU_CFLAGS-$(COMPILE_IN_THUMB_MODE)+=-mthumb
endif
ifeq ($(TARGET_ARCH),mips)
OPTIMIZATION+=-mno-split-addresses
CPU_CFLAGS-$(CONFIG_MIPS_ISA_1)+=-mips1
CPU_CFLAGS-$(CONFIG_MIPS_ISA_2)+=-mips2 -mtune=mips2
CPU_CFLAGS-$(CONFIG_MIPS_ISA_3)+=-mips3 -mtune=mips3
CPU_CFLAGS-$(CONFIG_MIPS_ISA_4)+=-mips4 -mtune=mips4
CPU_CFLAGS-$(CONFIG_MIPS_ISA_MIPS32)+=-mips32 -mtune=mips32
CPU_CFLAGS-$(CONFIG_MIPS_ISA_MIPS32R2)+=-march=mips32r2 -mtune=mips32r2
CPU_CFLAGS-$(CONFIG_MIPS_ISA_MIPS64)+=-mips64 -mtune=mips32
ifeq ($(strip $(ARCH_BIG_ENDIAN)),y)
CPU_LDFLAGS-$(CONFIG_MIPS_N64_ABI)+=-Wl,-melf64btsmip
CPU_LDFLAGS-$(CONFIG_MIPS_O32_ABI)+=-Wl,-melf32btsmip
endif
ifeq ($(strip $(ARCH_LITTLE_ENDIAN)),y)
CPU_LDFLAGS-$(CONFIG_MIPS_N64_ABI)+=-Wl,-melf64ltsmip
CPU_LDFLAGS-$(CONFIG_MIPS_O32_ABI)+=-Wl,-melf32ltsmip
endif
CPU_CFLAGS-$(CONFIG_MIPS_N64_ABI)+=-mabi=64
CPU_CFLAGS-$(CONFIG_MIPS_O32_ABI)+=-mabi=32
CPU_CFLAGS-$(CONFIG_MIPS_N32_ABI)+=-mabi=n32
endif
ifeq ($(TARGET_ARCH),nios)
OPTIMIZATION+=-funaligned-struct-hack
CPU_LDFLAGS-y+=-Wl,-m32
CPU_CFLAGS-y+=-Wl,-m32
endif
ifeq ($(TARGET_ARCH),sh)
OPTIMIZATION+= $(call check_gcc,-mprefergot,)
CPU_CFLAGS-$(ARCH_LITTLE_ENDIAN)+=-ml
CPU_CFLAGS-$(ARCH_BIG_ENDIAN)+=-mb
CPU_CFLAGS-$(CONFIG_SH2)+=-m2
CPU_CFLAGS-$(CONFIG_SH3)+=-m3
ifeq ($(UCLIBC_HAS_FPU),y)
CPU_CFLAGS-$(CONFIG_SH2A)+=-m2a
CPU_CFLAGS-$(CONFIG_SH4)+=-m4
else
CPU_CFLAGS-$(CONFIG_SH2A)+=-m2a-nofpu
CPU_CFLAGS-$(CONFIG_SH4)+=-m4-nofpu
endif
endif
ifeq ($(TARGET_ARCH),sh64)
CPU_CFLAGS-$(ARCH_LITTLE_ENDIAN):=-ml
CPU_CFLAGS-$(ARCH_BIG_ENDIAN):=-mb
CPU_CFLAGS-$(CONFIG_SH5)+=-m5-32media
endif
ifeq ($(TARGET_ARCH),h8300)
SYMBOL_PREFIX=_
CPU_LDFLAGS-$(CONFIG_H8300H)+= -Wl,-ms8300h
CPU_LDFLAGS-$(CONFIG_H8S) += -Wl,-ms8300s
CPU_CFLAGS-$(CONFIG_H8300H) += -mh -mint32
CPU_CFLAGS-$(CONFIG_H8S) += -ms -mint32
endif
ifeq ($(TARGET_ARCH),i960)
OPTIMIZATION+=-mh -mint32 #-fsigned-char
endif
ifeq ($(TARGET_ARCH),e1)
OPTIMIZATION+=-mgnu-param
endif
ifeq ($(TARGET_ARCH),cris)
CPU_LDFLAGS-$(CONFIG_CRIS)+=-Wl,-mcrislinux
CPU_LDFLAGS-$(CONFIG_CRISV32)+=-Wl,-mcrislinux
CPU_CFLAGS-$(CONFIG_CRIS)+=-mlinux
PICFLAG:=-fpic
PIEFLAG_NAME:=-fpie
endif
ifeq ($(TARGET_ARCH),m68k)
# -fPIC is only supported for 68020 and above. It is not supported
# for 68000, 68010, or Coldfire.
PICFLAG:=-fpic
PIEFLAG_NAME:=-fpie
endif
ifeq ($(TARGET_ARCH),powerpc)
# PowerPC can hold 8192 entries in its GOT with -fpic which is more than
# enough. Therefore use -fpic which will reduce code size and generates
# faster code.
PICFLAG:=-fpic
PIEFLAG_NAME:=-fpie
PPC_HAS_REL16:=$(shell echo -e "\t.text\n\taddis 11,30,_GLOBAL_OFFSET_TABLE_-.@ha" | $(CC) -c -x assembler -o /dev/null - 2> /dev/null && echo -n y || echo -n n)
CPU_CFLAGS-$(PPC_HAS_REL16)+= -DHAVE_ASM_PPC_REL16
CPU_CFLAGS-$(CONFIG_E500) += "-D__NO_MATH_INLINES"
endif
ifeq ($(TARGET_ARCH),bfin)
SYMBOL_PREFIX=_
ifeq ($(UCLIBC_FORMAT_FDPIC_ELF),y)
CPU_CFLAGS-y:=-mfdpic
CPU_LDFLAGS-y += -Wl,-melf32bfinfd
PICFLAG:=-fpic
PIEFLAG_NAME:=-fpie
endif
ifeq ($(UCLIBC_FORMAT_SHARED_FLAT),y)
PICFLAG := -mleaf-id-shared-library
endif
endif
ifeq ($(TARGET_ARCH),frv)
CPU_LDFLAGS-$(CONFIG_FRV)+=-Wl,-melf32frvfd
# Using -pie causes the program to have an interpreter, which is
# forbidden, so we must make do with -shared. Unfortunately,
# -shared by itself would get us global function descriptors
# and calls through PLTs, dynamic resolution of symbols, etc,
# which would break as well, but -Bsymbolic comes to the rescue.
export LDPIEFLAG:=-shared -Wl,-Bsymbolic
UCLIBC_LDSO=ld.so.1
endif
ifeq ($(strip $(TARGET_ARCH)),avr32)
CPU_CFLAGS-$(CONFIG_AVR32_AP7) += -march=ap
CPU_CFLAGS-$(CONFIG_LINKRELAX) += -mrelax
CPU_LDFLAGS-$(CONFIG_LINKRELAX) += --relax
endif
ifeq ($(TARGET_ARCH),i960)
SYMBOL_PREFIX=_
endif
ifeq ($(TARGET_ARCH),v850)
SYMBOL_PREFIX=_
endif
ifeq ($(TARGET_ARCH),c6x)
PIEFLAG:=
CPU_CFLAGS-$(CONFIG_TMS320C64X) += -march=c64x
CPU_CFLAGS-$(CONFIG_TMS320C64XPLUS) += -march=c64x+
CPU_CFLAGS-$(ARCH_LITTLE_ENDIAN)+=-mlittle-endian
CPU_CFLAGS-$(ARCH_BIG_ENDIAN)+=-mbig-endian
CPU_LDFLAGS-y += $(CPU_CFLAGS)
endif
# Keep the check_gcc from being needlessly executed
ifndef PIEFLAG
export PIEFLAG:=$(call check_gcc,$(PIEFLAG_NAME),$(PICFLAG))
endif
# We need to keep track of both the CC PIE flag (above) as
# well as the LD PIE flag (below) because we can't rely on
# gcc passing -pie if we used -fPIE. We need to directly use -pie
# instead of -Wl,-pie as gcc picks up the wrong startfile/endfile
ifndef LDPIEFLAG
export LDPIEFLAG:=$(shell $(LD) --help 2>/dev/null | grep -q -- -pie && echo "-pie")
endif
# Check for --as-needed support in linker
ifndef LD_FLAG_ASNEEDED
_LD_FLAG_ASNEEDED:=$(shell $(LD) --help 2>/dev/null | grep -- --as-needed)
ifneq ($(_LD_FLAG_ASNEEDED),)
export LD_FLAG_ASNEEDED:=--as-needed
endif
endif
ifndef LD_FLAG_NO_ASNEEDED
ifdef LD_FLAG_ASNEEDED
export LD_FLAG_NO_ASNEEDED:=--no-as-needed
endif
endif
ifndef CC_FLAG_ASNEEDED
ifdef LD_FLAG_ASNEEDED
export CC_FLAG_ASNEEDED:=-Wl,$(LD_FLAG_ASNEEDED)
endif
endif
ifndef CC_FLAG_NO_ASNEEDED
ifdef LD_FLAG_NO_ASNEEDED
export CC_FLAG_NO_ASNEEDED:=-Wl,$(LD_FLAG_NO_ASNEEDED)
endif
endif
link.asneeded = $(if $(findstring yy,$(CC_FLAG_ASNEEDED)$(CC_FLAG_NO_ASNEEDED)),$(CC_FLAG_ASNEEDED) $(1) $(CC_FLAG_NO_ASNEEDED))
# Check for AS_NEEDED support in linker script (binutils>=2.16.1 has it)
ifndef ASNEEDED
export ASNEEDED:=$(shell $(LD) --help 2>/dev/null | grep -q -- --as-needed && echo "AS_NEEDED ( $(UCLIBC_LDSO) )" || echo "$(UCLIBC_LDSO)")
ifeq ($(UCLIBC_HAS_BACKTRACE),y)
# Only used in installed libc.so linker script
UBACKTRACE_FULL_NAME := $(RUNTIME_PREFIX)lib/$(UBACKTRACE_DSO)
export UBACKTRACE_ASNEEDED:=$(shell $(LD) --help 2>/dev/null | grep -q -- --as-needed && echo "AS_NEEDED ( $(UBACKTRACE_FULL_NAME) )" || echo "$(UBACKTRACE_FULL_NAME)")
else
export UBACKTRACE_ASNEEDED:=""
endif
endif
# Add a bunch of extra pedantic annoyingly strict checks
XWARNINGS=$(call qstrip,$(WARNINGS))
XWARNINGS+=$(foreach w,\
-Wstrict-prototypes \
-Wstrict-aliasing \
, $(call check_gcc,$(w),))
ifeq ($(EXTRA_WARNINGS),y)
XWARNINGS+=$(foreach w,\
-Wformat=2 \
-Wmissing-noreturn \
-Wmissing-format-attribute \
-Wmissing-prototypes \
-Wmissing-declarations \
-Wnested-externs \
-Wnonnull \
-Wold-style-declaration \
-Wold-style-definition \
-Wshadow \
-Wundef \
, $(call check_gcc,$(w),))
# Works only w/ gcc-3.4 and up, can't be checked for gcc-3.x w/ check_gcc()
#XWARNINGS+=-Wdeclaration-after-statement
endif
CPU_CFLAGS=$(call qstrip,$(CPU_CFLAGS-y))
SSP_DISABLE_FLAGS ?= $(call check_gcc,-fno-stack-protector,)
ifeq ($(UCLIBC_BUILD_SSP),y)
SSP_CFLAGS := $(call check_gcc,-fno-stack-protector-all,)
SSP_CFLAGS += $(call check_gcc,-fstack-protector,)
SSP_ALL_CFLAGS ?= $(call check_gcc,-fstack-protector-all,)
else
SSP_CFLAGS := $(SSP_DISABLE_FLAGS)
endif
NOSTDLIB_CFLAGS:=$(call check_gcc,-nostdlib,)
# Collect all CFLAGS components
CFLAGS := -include $(top_srcdir)include/libc-symbols.h \
$(XWARNINGS) $(CPU_CFLAGS) $(SSP_CFLAGS) \
-nostdinc -I$(top_builddir)include -I$(top_srcdir)include -I. \
-I$(top_srcdir)libc/sysdeps/linux \
-I$(top_srcdir)libc/sysdeps/linux/$(TARGET_ARCH)
# We need this to be checked within libc-symbols.h
ifneq ($(HAVE_SHARED),y)
CFLAGS += -DSTATIC
endif
LDFLAG_WARN_ONCE:=$(if $(call check_ld,--warn-once),-Wl$(comma)--warn-once)
LDFLAG_SORT_COMMON:=$(if $(call check_ld,--sort-common),-Wl$(comma)--sort-common)
LDFLAG_DISCARD_ALL:=$(if $(call check_ld,--discard-all),-Wl$(comma)--discard-all)
LDFLAGS_NOSTRIP:=$(CPU_LDFLAGS-y) -shared \
-Wl,--warn-common $(LDFLAG_WARN_ONCE) -Wl,-z,combreloc
# binutils-2.16.1 warns about ignored sections, 2.16.91.0.3 and newer are ok
#LDFLAGS_NOSTRIP+=$(call check_ld,--gc-sections)
ifeq ($(UCLIBC_BUILD_RELRO),y)
LDFLAGS_NOSTRIP+=-Wl,-z,relro
endif
ifeq ($(UCLIBC_BUILD_NOW),y)
LDFLAGS_NOSTRIP+=-Wl,-z,now
endif
ifeq ($(LDSO_GNU_HASH_SUPPORT),y)
# Be sure that binutils support it
LDFLAGS_GNUHASH:=$(call check_ld,--hash-style=gnu)
ifeq ($(LDFLAGS_GNUHASH),)
ifneq ($(filter-out $(clean_targets) install_headers headers-y,$(MAKECMDGOALS)),)
$(error Your binutils do not support --hash-style option, while you want to use it)
endif
else
LDFLAGS_NOSTRIP += -Wl,$(LDFLAGS_GNUHASH)
endif
endif
LDFLAGS:=$(LDFLAGS_NOSTRIP) -Wl,-z,defs
ifeq ($(DODEBUG),y)
CFLAGS += -O0 -g3 -DDEBUG
else
CFLAGS += $(OPTIMIZATION)
endif
ifeq ($(DOSTRIP),y)
LDFLAGS += -Wl,-s
else
STRIPTOOL := true -Stripping_disabled
endif
ifneq ($(strip $(UCLIBC_EXTRA_CFLAGS)),"")
CFLAGS += $(call qstrip,$(UCLIBC_EXTRA_CFLAGS))
endif
ifeq ($(DOMULTI),y)
# we try to compile all sources at once into an object (IMA), but
# gcc-3.3.x does not support it
# gcc-3.4.x supports it, but does not need and support --combine. though fails on many sources
# gcc-4.0.x supports it, supports the --combine flag, but does not need it
# gcc-4.1(200506xx) supports it, but needs the --combine flag, else libs are useless
ifeq ($(GCC_MAJOR_VER),3)
DOMULTI:=n
else
CFLAGS+=$(call check_gcc,--combine,)
endif
else
DOMULTI:=n
endif
ifneq ($(strip $(UCLIBC_EXTRA_LDFLAGS)),"")
LDFLAGS += $(call qstrip,$(UCLIBC_EXTRA_LDFLAGS))
endif
ifeq ($(UCLIBC_HAS_THREADS),y)
ifeq ($(UCLIBC_HAS_THREADS_NATIVE),y)
PTNAME := nptl
CFLAGS += -DHAVE_FORCED_UNWIND
else
ifeq ($(LINUXTHREADS_OLD),y)
PTNAME := linuxthreads.old
else
PTNAME := linuxthreads
endif
endif
PTDIR := libpthread/$(PTNAME)
# set up system dependencies include dirs (NOTE: order matters!)
ifeq ($(UCLIBC_HAS_THREADS_NATIVE),y)
PTINC:= -I$(top_builddir)$(PTDIR) \
-I$(top_srcdir)$(PTDIR) \
$(if $(TARGET_ARCH),-I$(top_srcdir)$(PTDIR)/sysdeps/unix/sysv/linux/$(TARGET_ARCH)/$(TARGET_SUBARCH)) \
-I$(top_srcdir)$(PTDIR)/sysdeps/unix/sysv/linux/$(TARGET_ARCH) \
-I$(top_builddir)$(PTDIR)/sysdeps/$(TARGET_ARCH) \
-I$(top_srcdir)$(PTDIR)/sysdeps/$(TARGET_ARCH) \
-I$(top_builddir)$(PTDIR)/sysdeps/unix/sysv/linux \
-I$(top_srcdir)$(PTDIR)/sysdeps/unix/sysv/linux \
-I$(top_srcdir)$(PTDIR)/sysdeps/pthread \
-I$(top_srcdir)$(PTDIR)/sysdeps/pthread/bits \
-I$(top_srcdir)$(PTDIR)/sysdeps/generic \
-I$(top_srcdir)ldso/ldso/$(TARGET_ARCH) \
-I$(top_srcdir)ldso/include
#
# Test for TLS if NPTL support was selected.
#
GCC_HAS_TLS=$(shell \
echo "extern __thread int foo;" | $(CC) -o /dev/null -S -xc - 2>&1)
ifneq ($(GCC_HAS_TLS),)
gcc_tls_test_fail:
@echo "####";
@echo "#### Your compiler does not support TLS and you are trying to build uClibc";
@echo "#### with NPTL support. Upgrade your binutils and gcc to versions which";
@echo "#### support TLS for your architecture. Do not contact uClibc maintainers";
@echo "#### about this problem.";
@echo "####";
@echo "#### Exiting...";
@echo "####";
@exit 1;
endif
else
PTINC := \
-I$(top_srcdir)$(PTDIR)/sysdeps/unix/sysv/linux/$(TARGET_ARCH) \
-I$(top_srcdir)$(PTDIR)/sysdeps/$(TARGET_ARCH) \
-I$(top_srcdir)$(PTDIR)/sysdeps/unix/sysv/linux \
-I$(top_srcdir)$(PTDIR)/sysdeps/pthread \
-I$(top_srcdir)$(PTDIR) \
-I$(top_srcdir)libpthread
endif
CFLAGS+=$(PTINC)
else
PTNAME :=
PTINC :=
endif
CFLAGS += -I$(top_srcdir)libc/sysdeps/linux/common
CFLAGS += -I$(KERNEL_HEADERS)
#CFLAGS += -iwithprefix include-fixed -iwithprefix include
CC_IPREFIX := $(shell $(CC) --print-file-name=include)
CC_INC := -isystem $(dir $(CC_IPREFIX))include-fixed -isystem $(CC_IPREFIX)
CFLAGS += $(CC_INC)
ifneq ($(DOASSERTS),y)
CFLAGS+=-DNDEBUG
endif
ifeq ($(SYMBOL_PREFIX),_)
CFLAGS+=-D__UCLIBC_UNDERSCORES__
endif
# Keep the check_as from being needlessly executed
ifndef ASFLAGS_NOEXEC
ifeq ($(UCLIBC_BUILD_NOEXECSTACK),y)
export ASFLAGS_NOEXEC := $(call check_as,--noexecstack)
else
export ASFLAGS_NOEXEC :=
endif
endif
ASFLAGS = $(ASFLAGS_NOEXEC)
LIBGCC_CFLAGS ?= $(CFLAGS) $(CPU_CFLAGS-y)
LIBGCC:=$(shell $(CC) $(LIBGCC_CFLAGS) -print-libgcc-file-name)
LIBGCC_DIR:=$(dir $(LIBGCC))
# moved from libpthread/linuxthreads
ifeq ($(UCLIBC_CTOR_DTOR),y)
SHARED_START_FILES:=$(top_builddir)lib/crti.o $(LIBGCC_DIR)crtbeginS.o
SHARED_END_FILES:=$(LIBGCC_DIR)crtendS.o $(top_builddir)lib/crtn.o
endif
LOCAL_INSTALL_PATH := install_dir
Jump to Line
Something went wrong with that request. Please try again.