Permalink
Fetching contributors…
Cannot retrieve contributors at this time
165 lines (128 sloc) 6.19 KB
# -*- coding: utf-8; mode: tcl; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- vim:fenc=utf-8:ft=tcl:et:sw=4:ts=4:sts=4
PortSystem 1.0
name openocd
version 0.10.0
categories cross devel
license GPL
maintainers {snc @nerdling} openmaintainer
description Open On-Chip Debugger
long_description The Open On-Chip Debugger (OpenOCD) aims to provide \
debugging, in-system programming and boundary-scan \
testing for embedded target devices. Built with support \
for FT2232-based programmers by default. See variants for \
programmer options.
homepage http://openocd.sourceforge.net/
platforms darwin
master_sites sourceforge:project/openocd/openocd/${version}
use_bzip2 yes
checksums sha1 3245d43d60a1a93f8b0f6b1ce20b53e38cab7a4a \
rmd160 c3ae519d50e0f4185768a7642eefbc954c56d84a \
sha256 7312e7d680752ac088b8b8f2b5ba3ff0d30e0a78139531847be4b75c101316ae
configure.args-append --disable-werror --enable-maintainer-mode
depends_build-append port:pkgconfig
if {![variant_isset ft2232_ftd2xx]} {
default_variants +ftdi
}
variant dummy description {Enable building the dummy port driver} {
configure.args-append --enable-dummy
}
variant parport description {Enable building the pc parallel port driver. WARNING: not supported on OS X.} {
configure.args-append --enable-parport
}
variant ftdi conflicts ft2232_ftd2xx description {Enable building OpenOCD's built-in FTDI driver.} {
configure.args-append --enable-ftdi
depends_lib-append port:libusb
}
# The ft2232 variant is deprecated, the ftdi variant is its replacement
variant ft2232 conflicts ft2232_ftd2xx description {Enable building support for FT2232 based devices using the libftdi driver, opensource alternate of FTD2XX} {
configure.args-append --enable-legacy-ft2232_libftdi
depends_lib-append port:libftdi1
}
# The ft2232_ftd2xx variant is deprecated, the ftdi variant is its replacement
variant ft2232_ftd2xx conflicts ft2232 description {Enable building support for FT2232 based devices using the FTD2XX driver from ftdichip.com} {
patchfiles-append patch-ftd2xx-path.diff
use_autoreconf yes
configure.args-append --enable-legacy-ft2232_ftd2xx
depends_lib-append port:libftd2xx
}
variant usb_blaster conflicts usb_blaster_ftd2xx description {Enable building support for the Altera USB-Blaster using the libftdi driver, opensource alternate of FTD2XX} {
configure.args-append --enable-usb_blaster_libftdi
depends_lib-append port:libftdi1
}
variant usb_blaster_ftd2xx conflicts usb_blaster description {Enable building support for the Altera USB-Blaster using the FTD2XX driver from ftdichip.com} {
patchfiles-append patch-ftd2xx-path.diff
use_autoreconf yes
configure.args-append --enable-usb_blaster_ftd2xx
depends_lib-append port:libftd2xx
}
variant amtjtagaccel description {Enable building the Amontec JTAG-Accelerator driver} {
configure.args-append --enable-amtjtagaccel
}
variant ecosboard description {Enable building support for eCos based JTAG debugger} {
configure.args-append --enable-ecosboard
}
variant zy1000_master requires zy1000 description {Use ZY1000 JTAG master registers} {
configure.args-append --enable-zy1000-master
}
variant zy1000 conflicts minidriver_dummy description {Enable ZY1000 interface. WARNING: Using the minidriver disables all other drivers.} {
configure.args-append --enable-zy1000
}
variant ioutil description {Enable ioutil functions - useful for standalone OpenOCD implementations} {
configure.args-append --enable-ioutil
}
variant ep93xx description {Enable building support for EP93xx based SBCs} {
configure.args-append --enable-ep93xx
}
variant at91rm9200 description {Enable building support for AT91RM9200 based SBCs} {
configure.args-append --enable-at91rm9200
}
variant gw16012 description {Enable building support for the Gateworks GW16012 JTAG Programmer} {
configure.args-append --enable-gw16012
}
variant presto conflicts presto_ftd2xx description {Enable building support for ASIX Presto Programmer using the libftdi driver} {
configure.args-append --enable-presto_libftdi
depends_lib-append port:libftdi1
}
variant presto_ftd2xx conflicts presto description {Enable building support for ASIX Presto Programmer using the FTD2XX driver} {
configure.args-append --enable-presto_ftd2xx
depends_lib-append port:libftd2xx
}
variant usbprog description {Enable building support for the usbprog JTAG Programmer} {
configure.args-append --enable-usbprog
}
variant oocd_trace description {Enable building support for some prototype OpenOCD+trace ETM capture hardware} {
configure.args-append --enable-oocd_trace
}
variant jlink description {Enable building support for the Segger J-Link JTAG Programmer} {
configure.args-append --enable-jlink
}
variant vsllink description {Enable building support for the Versaloon-Link JTAG Programmer} {
configure.args-append --enable-vsllink
}
variant rlink description {Enable building support for the Raisonance RLink JTAG Programmer} {
configure.args-append --enable-rlink
}
variant ulink description {Enable building support for the Keil ULINK JTAG Programmer} {
configure.args-append --enable-ulink
}
variant arm_jtag_ew description {Enable building support for the Olimex ARM-JTAG-EW Programmer} {
configure.args-append --enable-arm-jtag-ew
}
variant buspirate description {Enable building support for the Buspirate} {
configure.args-append --enable-buspirate
}
variant minidriver_dummy conflicts zy1000 description {Enable the dummy minidriver} {
configure.args-append --enable-minidriver-dummy
}
variant stlink description {Enable building support for the STM ST-link} {
configure.args-append --enable-stlink
depends_lib-append port:libusb
}
variant ti description {TI-ICDI interface on Stellaris Launchpad} {
configure.args-append --enable-ti-icdi
depends_lib-append port:libusb
}
variant cmsis description {Enable building support for the cmsis-dap} {
configure.args-append --enable-cmsis-dap
depends_lib-append port:libhidapi
}