LAYOUT FILES: 8x8-RGB-LED-Matrix controller using 4x 74HC595 shift registers. CPU: ATmega168/328. Arduino 'compatible'. Runs with code from 'V3_x_boards_test' repo. KICAD and Gerber files.
CODE: Compling the 'core.a' file for your architecture + compiling 'normal' code. This assumes you have a working avr-gcc, avr-libc and the avr-binutils installed! This is intended to run on linux.
CODE: various things for ATtiny micro-controllers.
LAYOUT FILES: Bidirectional level-shifter for old 5V-only AVR-ISP programmers
LAYOUT FILES: AVR-ISP adapter: 6pin (2.54mm) --> 6pin pogo-pins (1.27mm).
CODE: LUFA / avrispmkII modification for easy linux/windows usage.
LAYOUT FILES: KiCad footprints for various Bluetooth modules
LAYOUT FILES: KiCad footprints for various SMD capacitors.
LAYOUT FILES: Capacitive sensing experiments.
LAYOUT FILES: Sewable blinky button for coats.
LAYOUT FILES: KiCad footprints for various DC-DC modules.
LAYOUT FILES: KiCad footprints for DIL headers
CODE + a little bit of hardware to test DSOs.
FreeRouting interactive push & shove router
Yet another copy of the original freerouting.net source
LAYOUT FILES: KiCad footprints for various polyswitch fuses.
LAYOUT FILES: KiCad footprints for various heatsinks.
LAYOUT FILES: Bread-board like proto-board with 1.27mm raster (50mil).
LAYOUT FILES: Circular extension board for IKEA Samtid lamps.
CODE: Circular extension board for IKEA Samtid lamps.
LAYOUT FILES: Circuit board to go between the movable beams of the Samtid lamp.
LAYOUT FILES: 38kHz IR receiver using ATtiny85 + TSOP38238
CODE: Arduino code for (xx8 chips). Receive raw IR signals with a demodulating IR sensor using a pin-change interrupt.
LAYOUT FILES: KiCad footprints for various parts.
Logos and other potentially useful graphical elements for KiCad
Various things to make working with KiCad easier. Most likely Linux centric.
- see title -
LAYOUT FILES: ATtiny24 (pre v1.10) / ATtiny2313 + MBI5168 controlled lamp with 32x superflux-class LEDs. Under heavy development --> unsafe to use!