Permalink
Switch branches/tags
Nothing to show
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
387 lines (176 sloc) 4.63 KB

OSC Commands for PocketVJ

You can change these values and commands in /sync/osc_control.js

Osc Receiving port: 9876


//# Global commands

/stopall

  • Stop every task

/testscreen

  • Activate test screen

/testscreenoff

  • Test screen off

/shutdown

  • Shutdown PocketVJ

/reboot

  • Reboots PocketVJ

/rebootall

  • Reboots all PocketVJ's identified in sync/rebootall/ with default IP address, 192.168.1.101, 102, 103, ...., 107. Will Reboot current PVJ despite correct IP address.

/shutdownall

  • Similar to reboot all, but will shutdown all PocketVJ's with default IP addresses. (192.168.1.101, 102, 103, ...., 107)

//# Audio Output and Testtone section

/testtone

  • Plays audio test tone

/testtoneright

  • Plays test tone in right only

/testtoneleft

  • Plays test tone in left only

/volumeup

  • Adjusts volume up

/volumedown

  • Adjusts volume down

/audiohdmiout

  • Sets audio to use HDMI port

/audiojack

  • Sets audio to use 3.5mm Jack port

/audioboth

  • Sets audio to use both HDMI and 3.5mm ports

/audiousb

  • Sets audio to use USB / or PiHat device. Sets also values to alsa:hw:1,0

//# Display adjustments

/rotate0

  • Sets screen rotation to normal

/rotate90

  • Rotates screen 90 degrees

/rotate180

  • Rotates screen 180 degrees

/rotate270

  • Rotates screen 270 degrees

/fliph

  • Flips screen Horizontally

/flipv

  • Flips screen Vertically

//# Clock Display and color Changes

/clockdisplay

  • Displays clock on screen

/clockred

  • Changes clock color to Red

/clockgreen

  • Changes clock color to Green

/clockorange

  • Changes clock color to Orange

/clockpink

  • Changes clock color to Pink

//# Video Control Section

/pause

  • Pauses current video

/fastforward

  • Skips forward 10 frames of current video

/stopvideo

  • Stops current video only

/startmaster

  • Starts master video player loop

/startmaster01

  • Plays Video 1 from Master (Slaves will follow)

/startmaster02

  • Plays Video 2

/startmaster03

  • Plays Video 3

/startmaster04

  • Plays Video 4

/startmaster05

  • Plays Video 5

/startmaster06

  • Plays Video 6

/startmaster07

  • Plays Video 7

/startmaster08

  • Plays Video 8

/startmaster09

  • Plays Video 9

/startmaster10

  • Plays Video 10

/startmaster11

  • Plays Video 11

/startmaster12

  • Plays Video 12

and so on, currently up to /startmaster30

/startslave

  • Sets 'this' device to slave (will wait for Master video to begin)

//# Imageplayer

/image

  • Starts image player

/stopimage

  • Stops Image player

/imageusb

  • Image player from USB

/imagemanual

  • Starts manual image player

/overlay

  • Start .png Overlay

/stopoverlay

  • Stops .png Overlay

//# PDF Player

/startpdf

  • Starts PDF Player

/startpdfusb

  • Starts PDF from USB player

//# Audio Player(s)

/startaudio

  • Starts audio player

/startaudioslave

  • Sets 'this' device as audio slave

/startaudiousb

  • Starts the audio player in USB mode

/stopaudio

  • Stops the audio player

//# Projector Control

/beameron

  • Turns the projector on (see PVJ manual for how to control over RJ45)

/beameroff

  • Turns the projector off

//# Custom Script Control

**Note: This section is for custom scripts.  These commands below are for their default functions. Scripts can be changed here* `/sync/customfunction1 & /sync/customfunction2`

/custom1

  • Starts all Pi Cameras on default IP address, 192.168.1.101, 102, 103, ...., 107.

/custom2

  • Ready's all video players on default IP's 101, 102, 103, ...., 107. for Master video to begin. Kills all other running processes

//# Pi Camera settings

/disablecamera

  • Disables the Pi Camera, must reboot to see changes.

/enablecamera

  • Enables the Pi Camera, must reboot to see changes

/camera

  • Starts the live Pi Camera feed, ^ The camera must be enabled first.

/cameranone

  • Sets the Camera FX to none / default

/cameragpen

  • Sets gPen Camera FX

/camerasketch

  • Sets Sketch Camera FX

/cameraemboss

  • Sets Emboss Camera FX

/camerahatch

  • Sets Hatch Camera FX

//# Softedge settings

/softedge100h

  • Horizontal Softedge 100px

/softedge200h

  • Horizontal Softedge 200px

/softedge100v

  • Vertical Softedge 100px

/softedge200v

  • Vertical Softedge 200px

// Syphon Receiver On/OFF

/tcpsserver

  • (Re)start TCP Syphon Receiver

// NDI Send / Receive

/ndireceiver

  • Starts NDI Receiver

/ndisend

  • Starts NDI sender

//# Pi Wall

/piwallmaster

  • Starts pi wall Master

/piwallloop

  • Starts pi wall Master loop

written by Cornelius Henke III a.k.a. ProjectileObjects