Permalink
Browse files

minor typos in start.gcodes, altshell fixed for SF-50

  • Loading branch information...
aleonard committed Nov 8, 2012
1 parent eb08d8e commit faff58c4ef499b9c5026ff4f828d6cbbbce505fa
@@ -6,7 +6,7 @@ G90 (set positioning to absolute)
M109 S110 T0 (set HBP temperature)
M104 S220 T0 (set extruder temperature)
(**** begin homing ****)
-G162 X Y F2500 (home XY axes maximum
+G162 X Y F2500 (home XY axes maximum)
G161 Z F1100 (home Z axis minimum)
G92 Z-5 (set Z to -5)
G1 Z0.0 (move Z to "0")
@@ -6,7 +6,7 @@ G90 (set positioning to absolute)
M104 S220 T0 (set extruder temperature)
M109 S110 T0 (set HBP temperature)
(**** begin homing ****)
-G162 X Y F2500 (home XY axes maximum
+G162 X Y F2500 (home XY axes maximum)
G161 Z F1100 (home Z axis minimum)
G92 Z-5 (set Z to -5)
G1 Z0.0 (move Z to "0")
@@ -5,7 +5,7 @@ G21 (set units to mm)
G90 (set positioning to absolute)
M104 S220 T0 (set extruder temperature)
(**** begin homing ****)
-G162 X Y F2500 (home XY axes maximum
+G162 X Y F2500 (home XY axes maximum)
G161 Z F1100 (home Z axis minimum)
G92 Z-5 (set Z to -5)
G1 Z0.0 (move Z to "0")
@@ -28,7 +28,7 @@
===Use M320/M321 Commands===
-Use M320/M321 to enable / disable acceleration if checked.
+Use M320/M321 to enable / disable acceleration if checked.
When unchecked, uses Open/Close Valve (M126/M127).
For Makerbot and Sailfish firmwares, use M320/M321. For the Jetty Firmware (v3.5 and earlier), do not use M320/M321.
"""
@@ -122,10 +122,10 @@ def parseLine( self, line ):
firstWord = splitLine[ 0 ]
- if line == '(<perimeter> outer )' or line == '(<perimeter> inner )':
+ if line == '(<edge> outer )' or line == '(<edge> inner )':
self.state = 1
- elif firstWord == '(</perimeter>)':
+ elif firstWord == '(</edge>)':
if self.state == 3:
# Open valve command
if self.repository.useM320M321.value:

0 comments on commit faff58c

Please sign in to comment.