From f8c8db966458a738607c7e2b1a7369dca51439bf Mon Sep 17 00:00:00 2001
From: Alex Buts <Alex.Buts@stfc.ac.uk>
Date: Fri, 9 May 2014 15:11:52 +0100
Subject: [PATCH] refs #9438 Found old dr2to& parameters file smuggled from LET

---
 .../instrument/LET_Parameters_dr2to7.xml      | 26 ++++++++++++-------
 1 file changed, 16 insertions(+), 10 deletions(-)

diff --git a/Code/Mantid/instrument/LET_Parameters_dr2to7.xml b/Code/Mantid/instrument/LET_Parameters_dr2to7.xml
index 99c364ea44da..391c36088c50 100644
--- a/Code/Mantid/instrument/LET_Parameters_dr2to7.xml
+++ b/Code/Mantid/instrument/LET_Parameters_dr2to7.xml
@@ -5,10 +5,6 @@
 
 <!-- files properties : -->
 
-<!-- Specify that the detector positions should be taken from the data file -->
-<parameter name="det-pos-source" type="string">
-  <value val="datafile"/>
-</parameter>
 <!-- The file which defines proper (calibrated) detector positions 
      if None - it is undefined -->
 <parameter name="det_cal_file" type="string">
@@ -34,11 +30,6 @@
    <value val="LET_rings_123.map"/>
 </parameter>
 
-<!-- Parameter describes if nexus source data files are written in event mode or not (reducer treats nxs files as nexus event files then) -->
-<parameter name="nexus_in_event_mode" type="bool">
-    <value val = "False"/>
-</parameter>
-
 
 <!-- RunNumber to use for diag instead of the input run number if none - use input run -->
 <parameter name="mask_run" type="string">
@@ -77,12 +68,20 @@
 <parameter name="ei-mon2-spec"  type="int">
   <value val="5506"/>
 </parameter>
+  
+<!--if you use some detectors as monitors and work in event mode, one needs to specify the comma separated list of these detectors here 
+    to copy detectors spectra to monitors spectra collected in histogram mode. If no such monitors are used "None" 
+    (with brackets) has to be specified as the value
+-->
+<parameter name="spectra_to_monitors_list"  type="string">
+  <value val="5506"/>
+</parameter>
+  
 <parameter name="ei_mon_spectra"  type="string">
   <value val="ei-mon1-spec:ei-mon2-spec"/>
 </parameter>
 
 
-
 <parameter name="scale-factor">
   <value val="1.7016e8"/>
 </parameter>
@@ -328,6 +327,13 @@
 <parameter name="use_hard_mask_only" type="bool">
     <value val="False"/>
 </parameter>
+  
+<!-- Parameter specifies if one wants to run diagnostics (which include applying hard mask file) or not-->
+<parameter name="run_diagnostics" type="bool">
+    <value val="True"/>
+</parameter>
+
+
 
 <!-- If this parameter is set to true, dgreduce will try to load mask from the mask file
      correspondent to the run if finds it and uses this mask as hard mask only (does not run diagnostics).