Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with
or
.
Download ZIP
Browse files

tagging 0.1alpha release

  • Loading branch information...
commit f7bae6965e70a89bcee971b1cee185ba12249394 1 parent 421950b
@artemp artemp authored
Showing with 107,520 additions and 0 deletions.
  1. +768 −0 trunk/ABOUT-NLS
  2. +3 −0  trunk/AUTHORS
  3. +340 −0 trunk/COPYING
  4. +7 −0 trunk/ChangeLog
  5. +231 −0 trunk/INSTALL
  6. +5 −0 trunk/Makefile.am
  7. +597 −0 trunk/Makefile.in
  8. 0  trunk/NEWS
  9. 0  trunk/README
  10. +82 −0 trunk/acinclude.m4
  11. +6,986 −0 trunk/aclocal.m4
  12. 0  trunk/autoscan.log
  13. +1,447 −0 trunk/config.guess
  14. +548 −0 trunk/config.rpath
  15. +1,555 −0 trunk/config.sub
  16. +24,796 −0 trunk/configure
  17. +92 −0 trunk/configure.ac
  18. +33 −0 trunk/configure.scan
  19. +522 −0 trunk/depcomp
  20. +323 −0 trunk/install-sh
  21. +515 −0 trunk/libltdl/COPYING.LIB
  22. +51 −0 trunk/libltdl/Makefile.am
  23. +663 −0 trunk/libltdl/Makefile.in
  24. +10 −0 trunk/libltdl/README
  25. +6,430 −0 trunk/libltdl/acinclude.m4
  26. +1,045 −0 trunk/libltdl/aclocal.m4
  27. +195 −0 trunk/libltdl/config-h.in
  28. +1,447 −0 trunk/libltdl/config.guess
  29. +1,555 −0 trunk/libltdl/config.sub
  30. +23,778 −0 trunk/libltdl/configure
  31. +79 −0 trunk/libltdl/configure.ac
  32. +322 −0 trunk/libltdl/install-sh
  33. +4,495 −0 trunk/libltdl/ltdl.c
  34. +366 −0 trunk/libltdl/ltdl.h
  35. +6,402 −0 trunk/libltdl/ltmain.sh
  36. +360 −0 trunk/libltdl/missing
  37. +6,402 −0 trunk/ltmain.sh
  38. +32 −0 trunk/m4/ChangeLog
  39. +1 −0  trunk/m4/Makefile.am
  40. +326 −0 trunk/m4/Makefile.in
  41. +23 −0 trunk/m4/codeset.m4
  42. +487 −0 trunk/m4/gettext.m4
  43. +32 −0 trunk/m4/glibc21.m4
  44. +103 −0 trunk/m4/iconv.m4
  45. +72 −0 trunk/m4/intdiv0.m4
  46. +32 −0 trunk/m4/intmax.m4
  47. +32 −0 trunk/m4/inttypes-pri.m4
  48. +27 −0 trunk/m4/inttypes.m4
  49. +28 −0 trunk/m4/inttypes_h.m4
  50. +26 −0 trunk/m4/isc-posix.m4
  51. +32 −0 trunk/m4/lcmessage.m4
  52. +112 −0 trunk/m4/lib-ld.m4
  53. +551 −0 trunk/m4/lib-link.m4
  54. +155 −0 trunk/m4/lib-prefix.m4
  55. +30 −0 trunk/m4/longdouble.m4
  56. +25 −0 trunk/m4/longlong.m4
  57. +49 −0 trunk/m4/nls.m4
  58. +426 −0 trunk/m4/po.m4
  59. +46 −0 trunk/m4/printf-posix.m4
  60. +91 −0 trunk/m4/progtest.m4
  61. +19 −0 trunk/m4/signed.m4
  62. +61 −0 trunk/m4/size_max.m4
  63. +28 −0 trunk/m4/stdint_h.m4
  64. +32 −0 trunk/m4/uintmax_t.m4
  65. +25 −0 trunk/m4/ulonglong.m4
  66. +22 −0 trunk/m4/wchar_t.m4
  67. +22 −0 trunk/m4/wint_t.m4
  68. +14 −0 trunk/m4/xsize.m4
  69. +353 −0 trunk/missing
  70. +150 −0 trunk/mkinstalldirs
  71. +11 −0 trunk/po/ChangeLog
  72. +366 −0 trunk/po/Makefile
  73. +366 −0 trunk/po/Makefile.in
  74. +41 −0 trunk/po/Makevars
  75. +47 −0 trunk/po/Rules-quot
  76. +10 −0 trunk/po/boldquot.sed
  77. +25 −0 trunk/po/en@boldquot.header
  78. +22 −0 trunk/po/en@quot.header
  79. +23 −0 trunk/po/insert-header.sin
  80. +6 −0 trunk/po/quot.sed
  81. +19 −0 trunk/po/remove-potcdate.sin
  82. +18 −0 trunk/python/Jamfile
  83. +5 −0 trunk/python/Jamrules
  84. +1 −0  trunk/python/boost-build.jam
  85. +50 −0 trunk/python/mapnik_color.cc
  86. +50 −0 trunk/python/mapnik_envelope.cc
  87. +99 −0 trunk/python/mapnik_layer.cc
  88. +92 −0 trunk/python/mapnik_map.cc
  89. +94 −0 trunk/python/mapnik_parameters.cc
  90. +153 −0 trunk/python/mapnik_python.cc
  91. +30 −0 trunk/src/Makefile.am
  92. +883 −0 trunk/src/Makefile.in
  93. +138 −0 trunk/src/attribute.hh
  94. +50 −0 trunk/src/attribute_container.cc
  95. +45 −0 trunk/src/attribute_container.hh
  96. +32 −0 trunk/src/color.cc
  97. +75 −0 trunk/src/color.hh
  98. +133 −0 trunk/src/config.hh.in
  99. +31 −0 trunk/src/configure.scan
  100. +131 −0 trunk/src/coord.hh
  101. +87 −0 trunk/src/coord_array.hh
  102. +122 −0 trunk/src/ctrans.hh
  103. +105 −0 trunk/src/datasource.hh
  104. +159 −0 trunk/src/datasource_cache.cc
  105. +48 −0 trunk/src/datasource_cache.hh
  106. +226 −0 trunk/src/envelope.cc
  107. +81 −0 trunk/src/envelope.hh
  108. +84 −0 trunk/src/factory.hh
  109. +49 −0 trunk/src/feature.cc
  110. +58 −0 trunk/src/feature.hh
  111. +51 −0 trunk/src/filter.hh
  112. +47 −0 trunk/src/gamma.hh
  113. +207 −0 trunk/src/geom_util.hh
  114. +237 −0 trunk/src/geometry.hh
  115. +94 −0 trunk/src/graphics.cc
  116. +100 −0 trunk/src/graphics.hh
  117. +109 −0 trunk/src/image_data.hh
  118. +38 −0 trunk/src/image_reader.cc
  119. +59 −0 trunk/src/image_reader.hh
  120. +81 −0 trunk/src/image_symbolizer.hh
  121. +147 −0 trunk/src/image_util.cc
  122. +208 −0 trunk/src/image_util.hh
  123. +187 −0 trunk/src/layer.cc
  124. +74 −0 trunk/src/layer.hh
  125. +145 −0 trunk/src/line_aa.cc
  126. +46 −0 trunk/src/line_aa.hh
  127. +53 −0 trunk/src/line_symbolizer.hh
  128. +172 −0 trunk/src/map.cc
  129. +64 −0 trunk/src/map.hh
  130. +59 −0 trunk/src/mapnik.hh
  131. +59 −0 trunk/src/memory.cc
  132. +85 −0 trunk/src/memory.hh
  133. +59 −0 trunk/src/params.cc
  134. +47 −0 trunk/src/params.hh
  135. +47 −0 trunk/src/plugin.cc
  136. +44 −0 trunk/src/plugin.hh
  137. +195 −0 trunk/src/png_reader.cc
  138. +89 −0 trunk/src/polygon_symbolizer.hh
  139. +120 −0 trunk/src/pool.hh
  140. +7 −0 trunk/src/postgis/Makefile.am
  141. +479 −0 trunk/src/postgis/Makefile.in
  142. +85 −0 trunk/src/postgis/connection.hh
  143. +111 −0 trunk/src/postgis/connection_manager.hh
  144. +179 −0 trunk/src/postgis/postgis.cc
  145. +75 −0 trunk/src/postgis/postgis.hh
  146. +64 −0 trunk/src/postgis/postgisfs.cc
  147. +125 −0 trunk/src/postgis/resultset.hh
  148. +106 −0 trunk/src/ptr.hh
  149. +31 −0 trunk/src/raster.cc
  150. +37 −0 trunk/src/raster.hh
  151. +8 −0 trunk/src/raster/Makefile.am
  152. +481 −0 trunk/src/raster/Makefile.in
  153. +90 −0 trunk/src/raster/raster_datasource.cc
  154. +52 −0 trunk/src/raster/raster_datasource.hh
  155. +81 −0 trunk/src/raster/raster_featureset.cc
  156. +115 −0 trunk/src/raster/raster_featureset.hh
  157. +71 −0 trunk/src/raster/raster_info.cc
  158. +46 −0 trunk/src/raster/raster_info.hh
  159. +48 −0 trunk/src/raster_feature.cc
  160. +45 −0 trunk/src/raster_feature.hh
  161. +129 −0 trunk/src/render.cc
  162. +45 −0 trunk/src/render.hh
  163. +46 −0 trunk/src/scanline.cc
  164. +44 −0 trunk/src/scanline.hh
  165. +621 −0 trunk/src/scanline_aa.cc
  166. +843 −0 trunk/src/scanline_aa.hh
  167. +8 −0 trunk/src/shape/Makefile.am
  168. +487 −0 trunk/src/shape/Makefile.in
  169. +59 −0 trunk/src/shape/dbf_test.cc
Sorry, we could not display the entire diff because it was too big.
View
768 trunk/ABOUT-NLS
@@ -0,0 +1,768 @@
+Notes on the Free Translation Project
+*************************************
+
+Free software is going international! The Free Translation Project is
+a way to get maintainers of free software, translators, and users all
+together, so that will gradually become able to speak many languages.
+A few packages already provide translations for their messages.
+
+ If you found this `ABOUT-NLS' file inside a distribution, you may
+assume that the distributed package does use GNU `gettext' internally,
+itself available at your nearest GNU archive site. But you do _not_
+need to install GNU `gettext' prior to configuring, installing or using
+this package with messages translated.
+
+ Installers will find here some useful hints. These notes also
+explain how users should proceed for getting the programs to use the
+available translations. They tell how people wanting to contribute and
+work at translations should contact the appropriate team.
+
+ When reporting bugs in the `intl/' directory or bugs which may be
+related to internationalization, you should tell about the version of
+`gettext' which is used. The information can be found in the
+`intl/VERSION' file, in internationalized packages.
+
+Quick configuration advice
+==========================
+
+If you want to exploit the full power of internationalization, you
+should configure it using
+
+ ./configure --with-included-gettext
+
+to force usage of internationalizing routines provided within this
+package, despite the existence of internationalizing capabilities in the
+operating system where this package is being installed. So far, only
+the `gettext' implementation in the GNU C library version 2 provides as
+many features (such as locale alias, message inheritance, automatic
+charset conversion or plural form handling) as the implementation here.
+It is also not possible to offer this additional functionality on top
+of a `catgets' implementation. Future versions of GNU `gettext' will
+very likely convey even more functionality. So it might be a good idea
+to change to GNU `gettext' as soon as possible.
+
+ So you need _not_ provide this option if you are using GNU libc 2 or
+you have installed a recent copy of the GNU gettext package with the
+included `libintl'.
+
+INSTALL Matters
+===============
+
+Some packages are "localizable" when properly installed; the programs
+they contain can be made to speak your own native language. Most such
+packages use GNU `gettext'. Other packages have their own ways to
+internationalization, predating GNU `gettext'.
+
+ By default, this package will be installed to allow translation of
+messages. It will automatically detect whether the system already
+provides the GNU `gettext' functions. If not, the GNU `gettext' own
+library will be used. This library is wholly contained within this
+package, usually in the `intl/' subdirectory, so prior installation of
+the GNU `gettext' package is _not_ required. Installers may use
+special options at configuration time for changing the default
+behaviour. The commands:
+
+ ./configure --with-included-gettext
+ ./configure --disable-nls
+
+will respectively bypass any pre-existing `gettext' to use the
+internationalizing routines provided within this package, or else,
+_totally_ disable translation of messages.
+
+ When you already have GNU `gettext' installed on your system and run
+configure without an option for your new package, `configure' will
+probably detect the previously built and installed `libintl.a' file and
+will decide to use this. This might be not what is desirable. You
+should use the more recent version of the GNU `gettext' library. I.e.
+if the file `intl/VERSION' shows that the library which comes with this
+package is more recent, you should use
+
+ ./configure --with-included-gettext
+
+to prevent auto-detection.
+
+ The configuration process will not test for the `catgets' function
+and therefore it will not be used. The reason is that even an
+emulation of `gettext' on top of `catgets' could not provide all the
+extensions of the GNU `gettext' library.
+
+ Internationalized packages have usually many `po/LL.po' files, where
+LL gives an ISO 639 two-letter code identifying the language. Unless
+translations have been forbidden at `configure' time by using the
+`--disable-nls' switch, all available translations are installed
+together with the package. However, the environment variable `LINGUAS'
+may be set, prior to configuration, to limit the installed set.
+`LINGUAS' should then contain a space separated list of two-letter
+codes, stating which languages are allowed.
+
+Using This Package
+==================
+
+As a user, if your language has been installed for this package, you
+only have to set the `LANG' environment variable to the appropriate
+`LL_CC' combination. Here `LL' is an ISO 639 two-letter language code,
+and `CC' is an ISO 3166 two-letter country code. For example, let's
+suppose that you speak German and live in Germany. At the shell
+prompt, merely execute `setenv LANG de_DE' (in `csh'),
+`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash').
+This can be done from your `.login' or `.profile' file, once and for
+all.
+
+ You might think that the country code specification is redundant.
+But in fact, some languages have dialects in different countries. For
+example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The
+country code serves to distinguish the dialects.
+
+ The locale naming convention of `LL_CC', with `LL' denoting the
+language and `CC' denoting the country, is the one use on systems based
+on GNU libc. On other systems, some variations of this scheme are
+used, such as `LL' or `LL_CC.ENCODING'. You can get the list of
+locales supported by your system for your country by running the command
+`locale -a | grep '^LL''.
+
+ Not all programs have translations for all languages. By default, an
+English message is shown in place of a nonexistent translation. If you
+understand other languages, you can set up a priority list of languages.
+This is done through a different environment variable, called
+`LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG'
+for the purpose of message handling, but you still need to have `LANG'
+set to the primary language; this is required by other parts of the
+system libraries. For example, some Swedish users who would rather
+read translations in German than English for when Swedish is not
+available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'.
+
+ Special advice for Norwegian users: The language code for Norwegian
+bokma*l changed from `no' to `nb' recently (in 2003). During the
+transition period, while some message catalogs for this language are
+installed under `nb' and some older ones under `no', it's recommended
+for Norwegian users to set `LANGUAGE' to `nb:no' so that both newer and
+older translations are used.
+
+ In the `LANGUAGE' environment variable, but not in the `LANG'
+environment variable, `LL_CC' combinations can be abbreviated as `LL'
+to denote the language's main dialect. For example, `de' is equivalent
+to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT'
+(Portuguese as spoken in Portugal) in this context.
+
+Translating Teams
+=================
+
+For the Free Translation Project to be a success, we need interested
+people who like their own language and write it well, and who are also
+able to synergize with other translators speaking the same language.
+Each translation team has its own mailing list. The up-to-date list of
+teams can be found at the Free Translation Project's homepage,
+`http://www.iro.umontreal.ca/contrib/po/HTML/', in the "National teams"
+area.
+
+ If you'd like to volunteer to _work_ at translating messages, you
+should become a member of the translating team for your own language.
+The subscribing address is _not_ the same as the list itself, it has
+`-request' appended. For example, speakers of Swedish can send a
+message to `sv-request@li.org', having this message body:
+
+ subscribe
+
+ Keep in mind that team members are expected to participate
+_actively_ in translations, or at solving translational difficulties,
+rather than merely lurking around. If your team does not exist yet and
+you want to start one, or if you are unsure about what to do or how to
+get started, please write to `translation@iro.umontreal.ca' to reach the
+coordinator for all translator teams.
+
+ The English team is special. It works at improving and uniformizing
+the terminology in use. Proven linguistic skill are praised more than
+programming skill, here.
+
+Available Packages
+==================
+
+Languages are not equally supported in all packages. The following
+matrix shows the current state of internationalization, as of January
+2004. The matrix shows, in regard of each package, for which languages
+PO files have been submitted to translation coordination, with a
+translation percentage of at least 50%.
+
+ Ready PO files af am ar az be bg bs ca cs da de el en en_GB eo es
+ +----------------------------------------------------+
+ a2ps | [] [] [] [] |
+ aegis | () |
+ ant-phone | () |
+ anubis | |
+ ap-utils | |
+ aspell | [] |
+ bash | [] [] [] [] |
+ batchelor | |
+ bfd | [] [] |
+ binutils | [] [] |
+ bison | [] [] [] |
+ bluez-pin | [] [] [] |
+ clisp | |
+ clisp | [] [] [] |
+ console-tools | [] [] |
+ coreutils | [] [] [] [] |
+ cpio | [] [] [] |
+ darkstat | [] () [] |
+ diffutils | [] [] [] [] [] [] [] |
+ e2fsprogs | [] [] [] |
+ enscript | [] [] [] [] |
+ error | [] [] [] [] [] |
+ fetchmail | [] () [] [] [] [] |
+ fileutils | [] [] [] |
+ findutils | [] [] [] [] [] [] [] |
+ flex | [] [] [] [] |
+ fslint | |
+ gas | [] |
+ gawk | [] [] [] [] |
+ gbiff | [] |
+ gcal | [] |
+ gcc | [] [] |
+ gettext | [] [] [] [] [] |
+ gettext-examples | [] [] [] [] |
+ gettext-runtime | [] [] [] [] [] |
+ gettext-tools | [] [] [] |
+ gimp-print | [] [] [] [] [] |
+ gliv | |
+ glunarclock | [] [] |
+ gnubiff | [] |
+ gnucash | [] () [] [] |
+ gnucash-glossary | [] () [] |
+ gnupg | [] () [] [] [] [] |
+ gpe-aerial | [] |
+ gpe-beam | [] [] |
+ gpe-calendar | [] [] |
+ gpe-clock | [] [] |
+ gpe-conf | [] [] |
+ gpe-contacts | [] [] |
+ gpe-edit | [] |
+ gpe-go | [] |
+ gpe-login | [] [] |
+ gpe-ownerinfo | [] [] |
+ gpe-sketchbook | [] [] |
+ gpe-su | [] [] |
+ gpe-taskmanager | [] [] |
+ gpe-timesheet | [] |
+ gpe-today | [] [] |
+ gpe-todo | [] [] |
+ gphoto2 | [] [] [] [] |
+ gprof | [] [] [] |
+ gpsdrive | () () () |
+ gramadoir | [] |
+ grep | [] [] [] [] [] [] |
+ gretl | [] |
+ gtick | [] () |
+ hello | [] [] [] [] [] [] |
+ id-utils | [] [] |
+ indent | [] [] [] [] |
+ iso_3166 | [] [] [] [] [] [] [] [] [] [] |
+ iso_3166_1 | [] [] [] [] [] [] |
+ iso_3166_2 | |
+ iso_3166_3 | [] |
+ iso_4217 | [] [] [] [] |
+ iso_639 | |
+ jpilot | [] [] [] |
+ jtag | |
+ jwhois | [] |
+ kbd | [] [] [] [] [] |
+ latrine | () |
+ ld | [] [] |
+ libc | [] [] [] [] [] [] |
+ libgpewidget | [] [] |
+ libiconv | [] [] [] [] [] |
+ lifelines | [] () |
+ lilypond | [] |
+ lingoteach | |
+ lingoteach_lessons | () () |
+ lynx | [] [] [] [] |
+ m4 | [] [] [] [] |
+ mailutils | [] [] |
+ make | [] [] [] |
+ man-db | [] () [] [] () |
+ minicom | [] [] [] |
+ mysecretdiary | [] [] [] |
+ nano | [] () [] [] [] |
+ nano_1_0 | [] () [] [] [] |
+ opcodes | [] |
+ parted | [] [] [] [] [] |
+ ptx | [] [] [] [] [] |
+ python | |
+ radius | [] |
+ recode | [] [] [] [] [] [] [] |
+ rpm | [] [] |
+ screem | |
+ scrollkeeper | [] [] [] [] [] [] |
+ sed | [] [] [] [] [] [] |
+ sh-utils | [] [] [] |
+ shared-mime-info | |
+ sharutils | [] [] [] [] [] [] |
+ silky | () |
+ skencil | [] () [] |
+ sketch | [] () [] |
+ soundtracker | [] [] [] |
+ sp | [] |
+ tar | [] [] [] [] |
+ texinfo | [] [] [] |
+ textutils | [] [] [] [] |
+ tin | () () |
+ tp-robot | |
+ tuxpaint | [] [] [] [] [] [] [] |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux | [] [] [] [] [] |
+ vorbis-tools | [] [] [] [] |
+ wastesedge | () |
+ wdiff | [] [] [] [] |
+ wget | [] [] [] [] [] [] |
+ xchat | [] [] [] [] |
+ xfree86_xkb_xml | [] [] |
+ xpad | [] |
+ +----------------------------------------------------+
+ af am ar az be bg bs ca cs da de el en en_GB eo es
+ 4 0 0 1 9 4 1 40 41 60 78 17 1 5 13 68
+
+ et eu fa fi fr ga gl he hr hu id is it ja ko lg
+ +-------------------------------------------------+
+ a2ps | [] [] [] () () |
+ aegis | |
+ ant-phone | [] |
+ anubis | [] |
+ ap-utils | [] |
+ aspell | [] [] |
+ bash | [] [] |
+ batchelor | [] [] |
+ bfd | [] |
+ binutils | [] [] |
+ bison | [] [] [] [] |
+ bluez-pin | [] [] [] [] [] |
+ clisp | |
+ clisp | [] |
+ console-tools | |
+ coreutils | [] [] [] [] [] [] |
+ cpio | [] [] [] [] |
+ darkstat | () [] [] [] |
+ diffutils | [] [] [] [] [] [] [] |
+ e2fsprogs | |
+ enscript | [] [] |
+ error | [] [] [] [] |
+ fetchmail | [] |
+ fileutils | [] [] [] [] [] [] |
+ findutils | [] [] [] [] [] [] [] [] [] [] [] |
+ flex | [] [] [] |
+ fslint | [] |
+ gas | [] |
+ gawk | [] [] [] |
+ gbiff | [] |
+ gcal | [] |
+ gcc | [] |
+ gettext | [] [] [] |
+ gettext-examples | [] [] |
+ gettext-runtime | [] [] [] [] [] |
+ gettext-tools | [] [] [] |
+ gimp-print | [] [] |
+ gliv | () |
+ glunarclock | [] [] [] [] |
+ gnubiff | [] |
+ gnucash | () [] |
+ gnucash-glossary | [] |
+ gnupg | [] [] [] [] [] [] [] |
+ gpe-aerial | [] |
+ gpe-beam | [] |
+ gpe-calendar | [] [] [] |
+ gpe-clock | [] |
+ gpe-conf | [] |
+ gpe-contacts | [] [] |
+ gpe-edit | [] [] |
+ gpe-go | [] |
+ gpe-login | [] [] |
+ gpe-ownerinfo | [] [] [] |
+ gpe-sketchbook | [] |
+ gpe-su | [] |
+ gpe-taskmanager | [] |
+ gpe-timesheet | [] [] [] |
+ gpe-today | [] [] |
+ gpe-todo | [] [] |
+ gphoto2 | [] [] [] |
+ gprof | [] [] |
+ gpsdrive | () () () |
+ gramadoir | [] [] |
+ grep | [] [] [] [] [] [] [] [] [] [] [] |
+ gretl | [] [] |
+ gtick | [] [] [] |
+ hello | [] [] [] [] [] [] [] [] [] [] [] [] [] |
+ id-utils | [] [] [] [] |
+ indent | [] [] [] [] [] [] [] [] [] |
+ iso_3166 | [] [] [] [] [] [] [] |
+ iso_3166_1 | [] [] [] [] [] |
+ iso_3166_2 | |
+ iso_3166_3 | |
+ iso_4217 | [] [] [] [] [] [] |
+ iso_639 | |
+ jpilot | [] () |
+ jtag | [] |
+ jwhois | [] [] [] [] |
+ kbd | [] |
+ latrine | [] |
+ ld | [] |
+ libc | [] [] [] [] [] [] |
+ libgpewidget | [] [] [] [] |
+ libiconv | [] [] [] [] [] [] [] [] [] |
+ lifelines | () |
+ lilypond | [] |
+ lingoteach | [] [] |
+ lingoteach_lessons | |
+ lynx | [] [] [] [] |
+ m4 | [] [] [] [] |
+ mailutils | |
+ make | [] [] [] [] [] [] |
+ man-db | () () |
+ minicom | [] [] [] [] |
+ mysecretdiary | [] [] |
+ nano | [] [] [] [] |
+ nano_1_0 | [] [] [] [] |
+ opcodes | [] |
+ parted | [] [] [] |
+ ptx | [] [] [] [] [] [] [] |
+ python | |
+ radius | [] |
+ recode | [] [] [] [] [] [] |
+ rpm | [] [] |
+ screem | |
+ scrollkeeper | [] |
+ sed | [] [] [] [] [] [] [] [] [] |
+ sh-utils | [] [] [] [] [] [] [] |
+ shared-mime-info | [] [] [] |
+ sharutils | [] [] [] [] [] |
+ silky | () [] () () |
+ skencil | [] |
+ sketch | [] |
+ soundtracker | [] [] |
+ sp | [] () |
+ tar | [] [] [] [] [] [] [] [] [] |
+ texinfo | [] [] [] [] |
+ textutils | [] [] [] [] [] [] |
+ tin | [] () |
+ tp-robot | [] |
+ tuxpaint | [] [] [] [] [] [] [] [] [] |
+ unicode-han-tra... | |
+ unicode-transla... | [] [] |
+ util-linux | [] [] [] [] () [] |
+ vorbis-tools | [] |
+ wastesedge | () |
+ wdiff | [] [] [] [] [] [] |
+ wget | [] [] [] [] [] [] [] |
+ xchat | [] [] [] |
+ xfree86_xkb_xml | [] [] |
+ xpad | [] [] |
+ +-------------------------------------------------+
+ et eu fa fi fr ga gl he hr hu id is it ja ko lg
+ 22 2 1 26 106 28 24 8 10 41 33 1 26 33 12 0
+
+ lt lv mk mn ms mt nb nl nn no nso pl pt pt_BR ro ru
+ +-----------------------------------------------------+
+ a2ps | [] [] () () [] [] [] |
+ aegis | () () () |
+ ant-phone | [] [] |
+ anubis | [] [] [] [] [] [] |
+ ap-utils | [] () [] |
+ aspell | [] |
+ bash | [] [] [] |
+ batchelor | [] |
+ bfd | [] |
+ binutils | [] |
+ bison | [] [] [] [] [] |
+ bluez-pin | [] [] [] |
+ clisp | |
+ clisp | [] |
+ console-tools | [] |
+ coreutils | [] [] |
+ cpio | [] [] [] [] [] |
+ darkstat | [] [] [] [] |
+ diffutils | [] [] [] [] [] [] |
+ e2fsprogs | [] |
+ enscript | [] [] [] [] |
+ error | [] [] [] |
+ fetchmail | [] [] () [] |
+ fileutils | [] [] [] |
+ findutils | [] [] [] [] [] |
+ flex | [] [] [] [] |
+ fslint | [] [] |
+ gas | |
+ gawk | [] [] [] |
+ gbiff | [] [] |
+ gcal | |
+ gcc | |
+ gettext | [] [] [] |
+ gettext-examples | [] [] [] |
+ gettext-runtime | [] [] [] [] |
+ gettext-tools | [] [] |
+ gimp-print | [] |
+ gliv | [] [] [] |
+ glunarclock | [] [] [] [] |
+ gnubiff | [] |
+ gnucash | [] [] () [] |
+ gnucash-glossary | [] [] |
+ gnupg | [] |
+ gpe-aerial | [] [] [] [] |
+ gpe-beam | [] [] [] [] |
+ gpe-calendar | [] [] [] [] |
+ gpe-clock | [] [] [] [] |
+ gpe-conf | [] [] [] [] |
+ gpe-contacts | [] [] [] [] |
+ gpe-edit | [] [] [] [] |
+ gpe-go | [] [] [] |
+ gpe-login | [] [] [] [] |
+ gpe-ownerinfo | [] [] [] [] |
+ gpe-sketchbook | [] [] [] [] |
+ gpe-su | [] [] [] [] |
+ gpe-taskmanager | [] [] [] [] |
+ gpe-timesheet | [] [] [] [] |
+ gpe-today | [] [] [] [] |
+ gpe-todo | [] [] [] [] |
+ gphoto2 | [] |
+ gprof | [] [] |
+ gpsdrive | () () [] |
+ gramadoir | () [] |
+ grep | [] [] [] [] [] |
+ gretl | |
+ gtick | [] [] [] |
+ hello | [] [] [] [] [] [] [] [] [] [] |
+ id-utils | [] [] [] [] |
+ indent | [] [] [] [] |
+ iso_3166 | [] [] [] |
+ iso_3166_1 | [] [] |
+ iso_3166_2 | |
+ iso_3166_3 | [] |
+ iso_4217 | [] [] [] [] [] [] [] [] |
+ iso_639 | [] |
+ jpilot | () () |
+ jtag | |
+ jwhois | [] [] [] [] () |
+ kbd | [] [] [] |
+ latrine | [] |
+ ld | |
+ libc | [] [] [] [] |
+ libgpewidget | [] [] [] |
+ libiconv | [] [] [] [] [] |
+ lifelines | |
+ lilypond | |
+ lingoteach | |
+ lingoteach_lessons | |
+ lynx | [] [] [] |
+ m4 | [] [] [] [] [] |
+ mailutils | [] [] [] |
+ make | [] [] [] [] |
+ man-db | [] |
+ minicom | [] [] [] [] |
+ mysecretdiary | [] [] [] |
+ nano | [] [] [] [] [] |
+ nano_1_0 | [] [] [] [] [] [] |
+ opcodes | [] [] |
+ parted | [] [] [] [] |
+ ptx | [] [] [] [] [] [] [] [] |
+ python | |
+ radius | [] [] |
+ recode | [] [] [] [] |
+ rpm | [] [] [] |
+ screem | |
+ scrollkeeper | [] [] [] [] [] |
+ sed | [] [] [] |
+ sh-utils | [] [] |
+ shared-mime-info | [] [] |
+ sharutils | [] [] |
+ silky | () |
+ skencil | [] [] |
+ sketch | [] [] |
+ soundtracker | |
+ sp | |
+ tar | [] [] [] [] [] [] |
+ texinfo | [] [] [] [] |
+ textutils | [] [] |
+ tin | |
+ tp-robot | [] |
+ tuxpaint | [] [] [] [] [] [] [] [] |
+ unicode-han-tra... | |
+ unicode-transla... | |
+ util-linux | [] [] [] |
+ vorbis-tools | [] [] [] |
+ wastesedge | |
+ wdiff | [] [] [] [] [] |
+ wget | [] [] [] |
+ xchat | [] [] [] |
+ xfree86_xkb_xml | [] [] |
+ xpad | [] [] |
+ +-----------------------------------------------------+
+ lt lv mk mn ms mt nb nl nn no nso pl pt pt_BR ro ru
+ 1 2 0 3 12 0 10 69 6 7 1 40 26 36 76 63
+
+ sk sl sr sv ta th tr uk ven vi wa xh zh_CN zh_TW zu
+ +-----------------------------------------------------+
+ a2ps | [] [] [] [] | 16
+ aegis | | 0
+ ant-phone | | 3
+ anubis | [] [] | 9
+ ap-utils | () | 3
+ aspell | | 4
+ bash | | 9
+ batchelor | | 3
+ bfd | [] [] | 6
+ binutils | [] [] [] | 8
+ bison | [] [] | 14
+ bluez-pin | [] [] [] | 14
+ clisp | | 0
+ clisp | | 5
+ console-tools | | 3
+ coreutils | [] [] [] [] | 16
+ cpio | [] [] | 14
+ darkstat | [] [] [] () () | 12
+ diffutils | [] [] [] | 23
+ e2fsprogs | [] [] | 6
+ enscript | [] [] | 12
+ error | [] [] [] | 15
+ fetchmail | [] [] | 11
+ fileutils | [] [] [] [] [] | 17
+ findutils | [] [] [] [] [] [] | 29
+ flex | [] [] | 13
+ fslint | | 3
+ gas | [] | 3
+ gawk | [] [] | 12
+ gbiff | | 4
+ gcal | [] [] | 4
+ gcc | [] | 4
+ gettext | [] [] [] [] [] | 16
+ gettext-examples | [] [] [] [] [] | 14
+ gettext-runtime | [] [] [] [] [] [] [] [] | 22
+ gettext-tools | [] [] [] [] [] [] | 14
+ gimp-print | [] [] | 10
+ gliv | | 3
+ glunarclock | [] [] [] | 13
+ gnubiff | | 3
+ gnucash | [] [] | 9
+ gnucash-glossary | [] [] [] | 8
+ gnupg | [] [] [] [] | 17
+ gpe-aerial | [] | 7
+ gpe-beam | [] | 8
+ gpe-calendar | [] [] [] [] | 13
+ gpe-clock | [] [] [] | 10
+ gpe-conf | [] [] | 9
+ gpe-contacts | [] [] [] | 11
+ gpe-edit | [] [] [] [] [] | 12
+ gpe-go | | 5
+ gpe-login | [] [] [] [] [] | 13
+ gpe-ownerinfo | [] [] [] [] | 13
+ gpe-sketchbook | [] [] | 9
+ gpe-su | [] [] [] | 10
+ gpe-taskmanager | [] [] [] | 10
+ gpe-timesheet | [] [] [] [] | 12
+ gpe-today | [] [] [] [] [] | 13
+ gpe-todo | [] [] [] [] | 12
+ gphoto2 | [] [] [] | 11
+ gprof | [] [] | 9
+ gpsdrive | [] [] | 3
+ gramadoir | [] | 5
+ grep | [] [] [] [] | 26
+ gretl | | 3
+ gtick | | 7
+ hello | [] [] [] [] [] | 34
+ id-utils | [] [] | 12
+ indent | [] [] [] [] | 21
+ iso_3166 | [] [] [] [] [] [] [] | 27
+ iso_3166_1 | [] [] [] | 16
+ iso_3166_2 | | 0
+ iso_3166_3 | | 2
+ iso_4217 | [] [] [] [] [] [] | 24
+ iso_639 | | 1
+ jpilot | [] [] [] [] [] | 9
+ jtag | [] | 2
+ jwhois | () [] [] | 11
+ kbd | [] [] | 11
+ latrine | | 2
+ ld | [] [] | 5
+ libc | [] [] [] [] | 20
+ libgpewidget | [] [] [] [] | 13
+ libiconv | [] [] [] [] [] [] [] [] | 27
+ lifelines | [] | 2
+ lilypond | [] | 3
+ lingoteach | | 2
+ lingoteach_lessons | () | 0
+ lynx | [] [] [] | 14
+ m4 | [] [] | 15
+ mailutils | | 5
+ make | [] [] [] | 16
+ man-db | [] | 5
+ minicom | | 11
+ mysecretdiary | [] [] | 10
+ nano | [] [] [] [] | 17
+ nano_1_0 | [] [] [] | 17
+ opcodes | [] [] | 6
+ parted | [] [] [] | 15
+ ptx | [] [] | 22
+ python | | 0
+ radius | | 4
+ recode | [] [] [] | 20
+ rpm | [] [] | 9
+ screem | [] [] | 2
+ scrollkeeper | [] [] [] | 15
+ sed | [] [] [] [] [] [] | 24
+ sh-utils | [] [] | 14
+ shared-mime-info | [] [] | 7
+ sharutils | [] [] [] [] | 17
+ silky | () | 3
+ skencil | [] | 6
+ sketch | [] | 6
+ soundtracker | [] [] | 7
+ sp | [] | 3
+ tar | [] [] [] [] [] | 24
+ texinfo | [] [] [] | 14
+ textutils | [] [] [] [] | 16
+ tin | | 1
+ tp-robot | | 2
+ tuxpaint | [] [] [] [] [] | 29
+ unicode-han-tra... | | 0
+ unicode-transla... | | 2
+ util-linux | [] [] | 15
+ vorbis-tools | | 8
+ wastesedge | | 0
+ wdiff | [] [] [] | 18
+ wget | [] [] [] [] [] [] [] [] | 24
+ xchat | [] [] [] [] [] | 15
+ xfree86_xkb_xml | [] [] [] [] [] | 11
+ xpad | | 5
+ +-----------------------------------------------------+
+ 63 teams sk sl sr sv ta th tr uk ven vi wa xh zh_CN zh_TW zu
+ 131 domains 47 19 28 83 0 0 59 13 1 1 11 0 22 22 0 1373
+
+ Some counters in the preceding matrix are higher than the number of
+visible blocks let us expect. This is because a few extra PO files are
+used for implementing regional variants of languages, or language
+dialects.
+
+ For a PO file in the matrix above to be effective, the package to
+which it applies should also have been internationalized and
+distributed as such by its maintainer. There might be an observable
+lag between the mere existence a PO file and its wide availability in a
+distribution.
+
+ If January 2004 seems to be old, you may fetch a more recent copy of
+this `ABOUT-NLS' file on most GNU archive sites. The most up-to-date
+matrix with full percentage details can be found at
+`http://www.iro.umontreal.ca/contrib/po/HTML/matrix.html'.
+
+Using `gettext' in new packages
+===============================
+
+If you are writing a freely available program and want to
+internationalize it you are welcome to use GNU `gettext' in your
+package. Of course you have to respect the GNU Library General Public
+License which covers the use of the GNU `gettext' library. This means
+in particular that even non-free programs can use `libintl' as a shared
+library, whereas only free software can use `libintl' as a static
+library or use modified versions of `libintl'.
+
+ Once the sources are changed appropriately and the setup can handle
+the use of `gettext' the only thing missing are the translations. The
+Free Translation Project is also available for packages which are not
+developed inside the GNU project. Therefore the information given above
+applies also for every other Free Software Project. Contact
+`translation@iro.umontreal.ca' to make the `.pot' files available to
+the translation teams.
+
View
3  trunk/AUTHORS
@@ -0,0 +1,3 @@
+Artem Pavlenko <artem@pavlenko.uklinux.net>
+
+
View
340 trunk/COPYING
@@ -0,0 +1,340 @@
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.
+ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Library General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Library General
+Public License instead of this License.
View
7 trunk/ChangeLog
@@ -0,0 +1,7 @@
+2004-11-29 gettextize <bug-gnu-gettext@gnu.org>
+
+ * Makefile.am (SUBDIRS): New variable.
+ (ACLOCAL_AMFLAGS): New variable.
+ (EXTRA_DIST): New variable.
+ * configure.ac (AC_CONFIG_FILES): Add po/Makefile.in,
+
View
231 trunk/INSTALL
@@ -0,0 +1,231 @@
+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004 Free
+Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
+Basic Installation
+==================
+
+These are generic installation instructions.
+
+ The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation. It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions. Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+ It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring. (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
+
+ If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release. If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+ The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'. You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+ 1. `cd' to the directory containing the package's source code and type
+ `./configure' to configure the package for your system. If you're
+ using `csh' on an old version of System V, you might need to type
+ `sh ./configure' instead to prevent `csh' from trying to execute
+ `configure' itself.
+
+ Running `configure' takes awhile. While running, it prints some
+ messages telling which features it is checking for.
+
+ 2. Type `make' to compile the package.
+
+ 3. Optionally, type `make check' to run any self-tests that come with
+ the package.
+
+ 4. Type `make install' to install the programs and any data files and
+ documentation.
+
+ 5. You can remove the program binaries and object files from the
+ source code directory by typing `make clean'. To also remove the
+ files that `configure' created (so you can compile the package for
+ a different kind of computer), type `make distclean'. There is
+ also a `make maintainer-clean' target, but that is intended mainly
+ for the package's developers. If you use it, you may have to get
+ all sorts of other programs in order to regenerate files that came
+ with the distribution.
+
+Compilers and Options
+=====================
+
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about. Run `./configure --help' for
+details on some of the pertinent environment variables.
+
+ You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment. Here
+is an example:
+
+ ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
+ *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory. To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'. `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script. `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+ If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory. After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
+
+Installation Names
+==================
+
+By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc. You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PREFIX'.
+
+ You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files. If you
+give `configure' the option `--exec-prefix=PREFIX', the package will
+use PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+ In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files. Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+ If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System). The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+ For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
+`--build=TYPE' option. TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+ CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+ OS KERNEL-OS
+
+ See the file `config.sub' for the possible values of each field. If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+ If you are _building_ compiler tools for cross-compiling, you should
+use the `--target=TYPE' option to select the type of system they will
+produce code for.
+
+ If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists. Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+Variables not defined in a site shell script can be set in the
+environment passed to `configure'. However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost. In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'. For example:
+
+ ./configure CC=/usr/local2/bin/gcc
+
+will cause the specified gcc to be used as the C compiler (unless it is
+overridden in the site shell script).
+
+`configure' Invocation
+======================
+
+`configure' recognizes the following options to control how it operates.
+
+`--help'
+`-h'
+ Print a summary of the options to `configure', and exit.
+
+`--version'
+`-V'
+ Print the version of Autoconf used to generate the `configure'
+ script, and exit.
+
+`--cache-file=FILE'
+ Enable the cache: use and save the results of the tests in FILE,
+ traditionally `config.cache'. FILE defaults to `/dev/null' to
+ disable caching.
+
+`--config-cache'
+`-C'
+ Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+ Do not print messages saying which checks are being made. To
+ suppress all normal output, redirect it to `/dev/null' (any error
+ messages will still be shown).
+
+`--srcdir=DIR'
+ Look for the package's source code in directory DIR. Usually
+ `configure' can determine that directory automatically.
+
+`configure' also accepts some other, not widely useful, options. Run
+`configure --help' for more details.
+
View
5 trunk/Makefile.am
@@ -0,0 +1,5 @@
+SUBDIRS = m4 libltdl src utils/shapeindex
+
+ACLOCAL_AMFLAGS = -I m4
+
+EXTRA_DIST = config.rpath mkinstalldirs
View
597 trunk/Makefile.in
@@ -0,0 +1,597 @@
+# Makefile.in generated by automake 1.9.3 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = .
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
+ $(srcdir)/Makefile.in $(top_srcdir)/configure ABOUT-NLS \
+ AUTHORS COPYING ChangeLog INSTALL NEWS config.guess \
+ config.rpath config.sub depcomp install-sh ltmain.sh missing \
+ mkinstalldirs
+subdir = .
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
+ $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+ $(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno configure.status.lineno
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/src/config.hh
+CONFIG_CLEAN_FILES =
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
+ html-recursive info-recursive install-data-recursive \
+ install-exec-recursive install-info-recursive \
+ install-recursive installcheck-recursive installdirs-recursive \
+ pdf-recursive ps-recursive uninstall-info-recursive \
+ uninstall-recursive
+ETAGS = etags
+CTAGS = ctags
+DIST_SUBDIRS = $(SUBDIRS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+ { test ! -d $(distdir) \
+ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
+ && rm -fr $(distdir); }; }
+DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_TIFF_READER_FALSE = @BUILD_TIFF_READER_FALSE@
+BUILD_TIFF_READER_TRUE = @BUILD_TIFF_READER_TRUE@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+INCLTDL = @INCLTDL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBLTDL = @LIBLTDL@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+POSTGIS_DATASOURCE_FALSE = @POSTGIS_DATASOURCE_FALSE@
+POSTGIS_DATASOURCE_TRUE = @POSTGIS_DATASOURCE_TRUE@
+POSTGRESQL_CFLAGS = @POSTGRESQL_CFLAGS@
+POSTGRESQL_LIBS = @POSTGRESQL_LIBS@
+POSTGRESQL_PREFIX = @POSTGRESQL_PREFIX@
+RANLIB = @RANLIB@
+RASTER_DATASOURCE_FALSE = @RASTER_DATASOURCE_FALSE@
+RASTER_DATASOURCE_TRUE = @RASTER_DATASOURCE_TRUE@
+SET_MAKE = @SET_MAKE@
+SHAPE_DATASOURCE_FALSE = @SHAPE_DATASOURCE_FALSE@
+SHAPE_DATASOURCE_TRUE = @SHAPE_DATASOURCE_TRUE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+TIFF_LDFLAGS = @TIFF_LDFLAGS@
+VERSION = @VERSION@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+ac_ct_RANLIB = @ac_ct_RANLIB@
+ac_ct_STRIP = @ac_ct_STRIP@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+datadir = @datadir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pluginsdir = @pluginsdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+subdirs = @subdirs@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+SUBDIRS = m4 libltdl src utils/shapeindex
+ACLOCAL_AMFLAGS = -I m4
+EXTRA_DIST = config.rpath mkinstalldirs
+all: all-recursive
+
+.SUFFIXES:
+am--refresh:
+ @:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+ @for dep in $?; do \
+ case '$(am__configure_deps)' in \
+ *$$dep*) \
+ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
+ cd $(srcdir) && $(AUTOMAKE) --gnu \
+ && exit 0; \
+ exit 1;; \
+ esac; \
+ done; \
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
+ cd $(top_srcdir) && \
+ $(AUTOMAKE) --gnu Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ @case '$?' in \
+ *config.status*) \
+ echo ' $(SHELL) ./config.status'; \
+ $(SHELL) ./config.status;; \
+ *) \
+ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+ esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure: $(am__configure_deps)
+ cd $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+mostlyclean-libtool:
+ -rm -f *.lo
+
+clean-libtool:
+ -rm -rf .libs _libs
+
+distclean-libtool:
+ -rm -f libtool
+uninstall-info-am:
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+$(RECURSIVE_TARGETS):
+ @set fnord $$MAKEFLAGS; amf=$$2; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @set fnord $$MAKEFLAGS; amf=$$2; \
+ dot_seen=no; \
+ case "$@" in \
+ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+ *) list='$(SUBDIRS)' ;; \
+ esac; \
+ rev=''; for subdir in $$list; do \
+ if test "$$subdir" = "."; then :; else \
+ rev="$$subdir $$rev"; \
+ fi; \
+ done; \
+ rev="$$rev ."; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+ctags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
+ done
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ mkid -fID $$unique
+tags: TAGS
+
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+ include_option=--etags-include; \
+ empty_fix=.; \
+ else \
+ include_option=--include; \
+ empty_fix=; \
+ fi; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test ! -f $$subdir/TAGS || \
+ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
+ test -n "$$unique" || unique=$$empty_fix; \
+ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+ $$tags $$unique; \
+ fi
+ctags: CTAGS
+CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
+ $(TAGS_FILES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+ unique=`for i in $$list; do \
+ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+ done | \
+ $(AWK) ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(CTAGS_ARGS)$$tags$$unique" \
+ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+ $$tags $$unique
+
+GTAGS:
+ here=`$(am__cd) $(top_builddir) && pwd` \
+ && cd $(top_srcdir) \
+ && gtags -i $(GTAGS_ARGS) $$here
+
+distclean-tags:
+ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+ $(am__remove_distdir)
+ mkdir $(distdir)
+ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+ list='$(DISTFILES)'; for file in $$list; do \
+ case $$file in \
+ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+ esac; \
+ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+ dir="/$$dir"; \
+ $(mkdir_p) "$(distdir)$$dir"; \
+ else \
+ dir=''; \
+ fi; \
+ if test -d $$d/$$file; then \
+ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ fi; \
+ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ else \
+ test -f $(distdir)/$$file \
+ || cp -p $$d/$$file $(distdir)/$$file \
+ || exit 1; \
+ fi; \
+ done
+ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -d "$(distdir)/$$subdir" \
+ || $(mkdir_p) "$(distdir)/$$subdir" \
+ || exit 1; \
+ distdir=`$(am__cd) $(distdir) && pwd`; \
+ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
+ (cd $$subdir && \
+ $(MAKE) $(AM_MAKEFLAGS) \
+ top_distdir="$$top_distdir" \
+ distdir="$$distdir/$$subdir" \
+ distdir) \
+ || exit 1; \
+ fi; \
+ done
+ -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
+ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
+ || chmod -R a+r $(distdir)
+dist-gzip: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ $(am__remove_distdir)
+dist-bzip2: distdir
+ tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+ $(am__remove_distdir)
+
+dist-tarZ: distdir
+ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+ $(am__remove_distdir)
+
+dist-shar: distdir
+ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+ $(am__remove_distdir)
+
+dist-zip: distdir
+ -rm -f $(distdir).zip
+ zip -rq $(distdir).zip $(distdir)
+ $(am__remove_distdir)
+
+dist dist-all: distdir
+ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+ tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+ $(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ case '$(DIST_ARCHIVES)' in \
+ *.tar.gz*) \
+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
+ *.tar.bz2*) \
+ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
+ *.tar.Z*) \
+ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+ *.shar.gz*) \
+ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
+ *.zip*) \
+ unzip $(distdir).zip ;;\
+ esac
+ chmod -R a-w $(distdir); chmod a+w $(distdir)
+ mkdir $(distdir)/_build
+ mkdir $(distdir)/_inst
+ chmod a-w $(distdir)
+ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+ && cd $(distdir)/_build \
+ && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+ $(DISTCHECK_CONFIGURE_FLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+ distuninstallcheck \
+ && chmod -R a-w "$$dc_install_base" \
+ && ({ \
+ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+ } || { rm -rf "$$dc_destdir"; exit 1; }) \
+ && rm -rf "$$dc_destdir" \
+ && $(MAKE) $(AM_MAKEFLAGS) dist \
+ && rm -rf $(DIST_ARCHIVES) \
+ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
+ $(am__remove_distdir)
+ @(echo "$(distdir) archives ready for distribution: "; \
+ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+ sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
+distuninstallcheck:
+ @cd $(distuninstallcheck_dir) \
+ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+ || { echo "ERROR: files left after uninstall:" ; \
+ if test -n "$(DESTDIR)"; then \
+ echo " (check DESTDIR support)"; \
+ fi ; \
+ $(distuninstallcheck_listfiles) ; \
+ exit 1; } >&2
+distcleancheck: distclean
+ @if test '$(srcdir)' = . ; then \
+ echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+ exit 1 ; \
+ fi
+ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+ || { echo "ERROR: files left in build directory after distclean:" ; \
+ $(distcleancheck_listfiles) ; \
+ exit 1; } >&2
+check-am: all-am
+check: check-recursive
+all-am: Makefile
+installdirs: installdirs-recursive
+installdirs-am:
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+ `test -z '$(STRIP)' || \
+ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+ @echo "This command is intended for maintainers to use"
+ @echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool \
+ distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+info: info-recursive
+
+info-am:
+
+install-data-am:
+
+install-exec-am:
+
+install-info: install-info-recursive
+
+install-man:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+ -rm -f $(am__CONFIG_DISTCLEAN_FILES)
+ -rm -rf $(top_srcdir)/autom4te.cache
+ -rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-info-am
+
+uninstall-info: uninstall-info-recursive
+
+.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
+ check-am clean clean-generic clean-libtool clean-recursive \
+ ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \
+ dist-shar dist-tarZ dist-zip distcheck distclean \
+ distclean-generic distclean-libtool distclean-recursive \
+ distclean-tags distcleancheck distdir distuninstallcheck dvi \
+ dvi-am html html-am info info-am install install-am \
+ install-data install-data-am install-exec install-exec-am \
+ install-info install-info-am install-man install-strip \
+ installcheck installcheck-am installdirs installdirs-am \
+ maintainer-clean maintainer-clean-generic \
+ maintainer-clean-recursive mostlyclean mostlyclean-generic \
+ mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
+ tags tags-recursive uninstall uninstall-am uninstall-info-am
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
View
0  trunk/NEWS
No changes.
View
0  trunk/README
No changes.
View
82 trunk/acinclude.m4
@@ -0,0 +1,82 @@
+# debug build of libxmap
+AC_DEFUN([AP_ENABLE_DEBUG],
+[AC_ARG_ENABLE(debug,
+[AC_HELP_STRING([--enable-debug],[build a debug version of libxmap])],
+[xmap_debug_build=yes
+CXXFLAGS="-Wall -g -O0"],
+[xmap_debug_build=no])
+])
+
+#check for freetype2 installation
+AC_DEFUN([AP_CHECK_FREETYPE2_NEW],
+ [AC_MSG_CHECKING([for freetype2 installation])
+ PKG_CHECK_MODULES(freetype2, freetype2 >= 7.0.1)
+ AC_SUBST(FREETYPE2_CFLAGS)
+ AC_SUBST(FREETYPE2_LIBS)]
+)
+
+AC_DEFUN([AP_CHECK_FREETYPE2],
+[AC_MSG_CHECKING([for freetype2 installation])
+ AC_ARG_WITH(freetype2,
+ [AC_HELP_STRING([--with-freetype2=DIR],[prefix of freetype2 installation. e.g /usr/local or /usr])],
+
+ [FREETYPE2_PREFIX=$with_freetype2],
+ AC_MSG_ERROR([You must call configure with the --with-freetype2 option.
+ This tells configure where to find the freetype2 library and headers.
+ e.g. --with-freetype2=/usr/local or --with-freetype2=/usr])
+)
+
+AC_MSG_RESULT(yes)
+AC_SUBST(FREETYPE2_PREFIX)
+FREETYPE2_LIBS="-L${FREETYPE2_PREFIX}/lib -lfreetype"
+FREETYPE2_CFLAGS="-I${FREETYPE2_PREFIX}/include/freetype2"
+AC_SUBST(FREETYPE2_LIBS)
+AC_SUBST(FREETYPE2_CFLAGS)
+])
+
+# check for postgresql installation
+AC_DEFUN([AP_CHECK_POSTGRESQL],
+[AC_MSG_CHECKING([for postgresql installation])
+ AC_ARG_WITH(postgresql,
+ [AC_HELP_STRING([--with-postgresql=DIR],[prefix of postgresql installation. e.g /usr/local or /usr])],
+ [POSTGRESQL_PREFIX=$with_postgresql],
+ AC_MSG_ERROR([You must call configure with the --with-postgresql option.
+ This tells configure where to find the postgresql library and headers.
+ e.g. --with-postgresql=/usr/local or --with-postgresql=/usr])
+)
+AC_SUBST(POSTGRESQL_PREFIX)
+POSTGRESQL_LIBS="-L${POSTGRESQL_PREFIX}/lib -lpq"
+POSTGRESQL_CFLAGS="-I${POSTGRESQL_PREFIX}/include"
+AC_SUBST(POSTGRESQL_LIBS)
+AC_SUBST(POSTGRESQL_CFLAGS)
+])
+
+# check for libtiff installation
+AC_DEFUN([AP_CHECK_LIBTIFF],
+[AC_MSG_CHECKING([for libtiff installation])
+ AC_ARG_WITH([tiff-dir],[AC_HELP_STRING(
+ [--with-tiff-dir=DIR],[directory to look for tiff libraries and headers])],
+ [if test "$withval" != no ; then
+ AC_MSG_RESULT(yes)
+ TIFF_HOME="$withval"
+ if test "$withval" = "yes" ; then
+ TIFF_HOME="/usr/local"
+ fi
+ AC_CHECK_LIB(tiff,TIFFReadRGBAStrip,
+ AC_CHECK_LIB(tiff,TIFFReadRGBATile, [HAVE_LIBTIFF="yes"] [AC_SUBST([TIFF_LDFLAGS],["-L${TIFF_HOME} -ltiff"])],
+ [AC_MSG_RESULT(no)],)
+ ,[AC_MSG_RESULT(no)],)
+ else
+ AC_MSG_RESULT(no)
+ AC_MSG_ERROR([sorry, libtiff needed try --with-tiff-dir=<DIR>])
+ fi
+ ],
+ [
+ AC_MSG_RESULT(yes)
+ AC_CHECK_LIB(tiff,TIFFReadRGBAStrip,
+ [AC_CHECK_LIB(tiff,TIFFReadRGBATile,[HAVE_LIBTIFF="yes"] [AC_SUBST([TIFF_LDFLAGS],["-ltiff"])],
+ [AC_MSG_ERROR([sorry, libtiff needed try --with-tiff-dir=<DIR>])],)]
+ ,[AC_MSG_ERROR([sorry, libtiff needed try --with-tiff-dir=<DIR>])],)
+ ])
+])
+
View
6,986 trunk/aclocal.m4
6,986 additions, 0 deletions not shown
View
0  trunk/autoscan.log
No changes.
View
1,447 trunk/config.guess
@@ -0,0 +1,1447 @@
+#! /bin/sh
+# Attempt to guess a canonical system name.
+# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+# 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
+
+timestamp='2004-09-07'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Per Bothner <per@bothner.com>.
+# Please send patches to <config-patches@gnu.org>. Submit a context
+# diff and a properly formatted ChangeLog entry.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub. If it succeeds, it prints the system name on stdout, and
+# exits with 0. Otherwise, it exits with 1.
+#
+# The plan is that this can be called by configure scripts if you
+# don't specify an explicit build system type.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+ -h, --help print this help, then exit
+ -t, --time-stamp print date of last modification, then exit
+ -v, --version print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions. There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+ case $1 in
+ --time-stamp | --time* | -t )
+ echo "$timestamp" ; exit 0 ;;
+ --version | -v )
+ echo "$version" ; exit 0 ;;
+ --help | --h* | -h )
+ echo "$usage"; exit 0 ;;
+ -- ) # Stop option processing
+ shift; break ;;
+ - ) # Use stdin as input.
+ break ;;
+ -* )
+ echo "$me: invalid option $1$help" >&2
+ exit 1 ;;
+ * )
+ break ;;
+ esac
+done
+
+if test $# != 0; then
+ echo "$me: too many arguments$help" >&2
+ exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,) echo "int x;" > $dummy.c ;
+ for c in cc gcc c89 c99 ; do
+ if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+ CC_FOR_BUILD="$c"; break ;
+ fi ;
+ done ;
+ if test x"$CC_FOR_BUILD" = x ; then
+ CC_FOR_BUILD=no_compiler_found ;
+ fi
+ ;;
+ ,,*) CC_FOR_BUILD=$CC ;;
+ ,*,*) CC_FOR_BUILD=$HOST_CC ;;
+esac ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+ PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+ *:NetBSD:*:*)
+ # NetBSD (nbsd) targets should (where applicable) match one or
+ # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+ # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
+ # switched to ELF, *-*-netbsd* would select the old
+ # object file format. This provides both forward
+ # compatibility and a consistent mechanism for selecting the
+ # object file format.
+ #
+ # Note: NetBSD doesn't particularly care about the vendor
+ # portion of the name. We always set it to "unknown".
+ sysctl="sysctl -n hw.machine_arch"
+ UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+ /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+ case "${UNAME_MACHINE_ARCH}" in
+ armeb) machine=armeb-unknown ;;
+ arm*) machine=arm-unknown ;;
+ sh3el) machine=shl-unknown ;;
+ sh3eb) machine=sh-unknown ;;
+ *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+ esac
+ # The Operating System including object format, if it has switched
+ # to ELF recently, or will in the future.
+ case "${UNAME_MACHINE_ARCH}" in
+ arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+ eval $set_cc_for_build
+ if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+ | grep __ELF__ >/dev/null
+ then
+ # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+ # Return netbsd for either. FIX?
+ os=netbsd
+ else
+ os=netbsdelf
+ fi
+ ;;
+ *)
+ os=netbsd
+ ;;
+ esac
+ # The OS release
+ # Debian GNU/NetBSD machines have a different userland, and
+ # thus, need a distinct triplet. However, they do not need
+ # kernel version information, so it can be replaced with a
+ # suitable tag, in the style of linux-gnu.
+ case "${UNAME_VERSION}" in
+ Debian*)
+ release='-gnu'
+ ;;
+ *)
+ release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+ ;;
+ esac
+ # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+ # contains redundant information, the shorter form:
+ # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+ echo "${machine}-${os}${release}"
+ exit 0 ;;
+ amd64:OpenBSD:*:*)
+ echo x86_64-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ amiga:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ cats:OpenBSD:*:*)
+ echo arm-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ hp300:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ luna88k:OpenBSD:*:*)
+ echo m88k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mac68k:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ macppc:OpenBSD:*:*)
+ echo powerpc-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mvme68k:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mvme88k:OpenBSD:*:*)
+ echo m88k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ mvmeppc:OpenBSD:*:*)
+ echo powerpc-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ sgi:OpenBSD:*:*)
+ echo mips64-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ sun3:OpenBSD:*:*)
+ echo m68k-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ *:OpenBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE}
+ exit 0 ;;
+ *:ekkoBSD:*:*)
+ echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+