You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Hi, I got a problem just like issus #259. But I didn't find the answer there.
RunPipeline command keeps failing, saying that project dir does not exist (even though the initPipeline completes and states that the directory was successfully created).
ubuntu@ip-172-31-1-136:~$ /home/ubuntu/metAMOS-1.5rc3/runPipeline -t -q YES -a idba-ud -o 20 -m bowtie2 -b YES -u YES -p 128 -d /home/ubuntu/Result/ab
project dir does not exist!
usage: runPipeline [options] -d projectdir
-h = : print help [this message]
-j = : just output all of the programs and citations then exit (default = NO)
-v = : verbose output? (default = NO)
-d = : directory created by initPipeline (REQUIRED)
[options]: [pipeline_opts] [misc_opts]
[pipeline_opts]: options that affect the pipeline execution
Pipeline consists of the following steps:
Preprocess, Assemble, FindORFS, MapReads, Abundance, Annotate,
FunctionalAnnotation, Scaffold, Propagate, Classify, Postprocess
Each of these steps can be referred to by the following options:
-f = : force this step to be run (default = NONE)
-s = : start at this step in the pipeline (default = Preprocess)
-e = : end at this step in the pipeline (default = Postprocess)
-n = : step to skip in pipeline (default=NONE)
For each step you can fine-tune the execution as follows
[Preprocess]
-t = : filter input reads? (default = metamos, supported = none,metamos,eautils,pbcr)
-q = : produce FastQC quality report for reads with quality information (fastq or sff)? (default = NO)
[Assemble]
-a = : genome assembler to use (default = soapdenovo, supported = newbler,soapdenovo,soapdenovo2,ca,velvet,velvet-sc,metavelvet,metaidba,sparseassembler,minimus,abyss,edena,spades,mira,sga,idba-ud,ray,masurca)
-k = : k-mer size to be used for assembly (default = 31)
-o = >: min overlap length
[MapReads]
-m = : read mapper to use? (default = bowtie, supported = bowtie,bowtie2)
-i = : save bowtie (i)ndex? (default = NO)
-b = : create library specific per bp coverage of assembled contigs (default = NO)
[FindORFS]
-g = : gene caller to use (default = fraggenescan, supported = fraggenescan,metagenemark,glimmermg)
-l = : min contig length to use for ORF call (default = 300)
-x = >: min contig coverage to use for ORF call (default = 3X)
[Validate]
-X = : comma-separated list of validators to run on the assembly. (default = lap, supported = reapr,orf,lap,ale,quast,frcbam,freebayes,cgal,n50)
-S = : comma-separated list of scores to use to select the winning assembly. By default, all validation tools specified by -X will be run. For each score, an optional weight can be specified as SCORE:WEIGHT. For example, LAP:1,CGAL:2 (supported = all,lap,ale,cgal,snp,frcbam,orf,reapr,n50)
[Annotate]
-c = : classifier to use for annotation (default = kraken, supported = fcp,phylosift,phmmer,blast,metaphyler,phymm,kraken
-u = : annotate unassembled reads? (default = NO)
[Classify]
-z = : taxonomic level to categorize at (default = class)
[misc_opts]: Miscellaneous options
-B = : blast DBs not available (default = NO)
-r = : retain the AMOS bank? (default = NO)
-p = : number of threads to use (be greedy!) (default=1)
-4 = : 454 data? (default = NO)
-L = : generate local Krona plots. Local Krona plots can only be viewed on the machine they are generated on but will work on a system with no internet connection (default = NO)
ubuntu@ip-172-31-1-136:~$ /home/ubuntu/metAMOS-1.5rc3/runPipeline -t -q YES -a idba-ud -o 20 -m bowtie2 -b YES -u YES -p 128 -d /home/ubuntu/Result/Abalone/
project dir does not exist!
usage: runPipeline [options] -d projectdir
-h = : print help [this message]
-j = : just output all of the programs and citations then exit (default = NO)
-v = : verbose output? (default = NO)
-d = : directory created by initPipeline (REQUIRED)
[options]: [pipeline_opts] [misc_opts]
[pipeline_opts]: options that affect the pipeline execution
Pipeline consists of the following steps:
Preprocess, Assemble, FindORFS, MapReads, Abundance, Annotate,
FunctionalAnnotation, Scaffold, Propagate, Classify, Postprocess
Each of these steps can be referred to by the following options:
-f = : force this step to be run (default = NONE)
-s = : start at this step in the pipeline (default = Preprocess)
-e = : end at this step in the pipeline (default = Postprocess)
-n = : step to skip in pipeline (default=NONE)
For each step you can fine-tune the execution as follows
[Preprocess]
-t = : filter input reads? (default = metamos, supported = none,metamos,eautils,pbcr)
-q = : produce FastQC quality report for reads with quality information (fastq or sff)? (default = NO)
[Assemble]
-a = : genome assembler to use (default = soapdenovo, supported = newbler,soapdenovo,soapdenovo2,ca,velvet,velvet-sc,metavelvet,metaidba,sparseassembler,minimus,abyss,edena,spades,mira,sga,idba-ud,ray,masurca)
-k = : k-mer size to be used for assembly (default = 31)
-o = >: min overlap length
[MapReads]
-m = : read mapper to use? (default = bowtie, supported = bowtie,bowtie2)
-i = : save bowtie (i)ndex? (default = NO)
-b = : create library specific per bp coverage of assembled contigs (default = NO)
[FindORFS]
-g = : gene caller to use (default = fraggenescan, supported = fraggenescan,metagenemark,glimmermg)
-l = : min contig length to use for ORF call (default = 300)
-x = >: min contig coverage to use for ORF call (default = 3X)
[Validate]
-X = : comma-separated list of validators to run on the assembly. (default = lap, supported = reapr,orf,lap,ale,quast,frcbam,freebayes,cgal,n50)
-S = : comma-separated list of scores to use to select the winning assembly. By default, all validation tools specified by -X will be run. For each score, an optional weight can be specified as SCORE:WEIGHT. For example, LAP:1,CGAL:2 (supported = all,lap,ale,cgal,snp,frcbam,orf,reapr,n50)
[Annotate]
-c = : classifier to use for annotation (default = kraken, supported = fcp,phylosift,phmmer,blast,metaphyler,phymm,kraken
-u = : annotate unassembled reads? (default = NO)
[Classify]
-z = : taxonomic level to categorize at (default = class)
[misc_opts]: Miscellaneous options
-B = : blast DBs not available (default = NO)
-r = : retain the AMOS bank? (default = NO)
-p = : number of threads to use (be greedy!) (default=1)
-4 = : 454 data? (default = NO)
-L = : generate local Krona plots. Local Krona plots can only be viewed on the machine they are generated on but will work on a system with no internet connection (default = NO)
Thank you for your help!!
The text was updated successfully, but these errors were encountered:
I know what the problem is! all "YES" should be omitted.
ubuntu@ip-172-31-1-136:~$ /home/ubuntu/metAMOS-1.5rc3/runPipeline -t -q -a idba-ud -o 20 -m bowtie2 -b -u -p 128 -d /home/ubuntu/Result/ab
Hi, I got a problem just like issus #259. But I didn't find the answer there.
RunPipeline command keeps failing, saying that project dir does not exist (even though the initPipeline completes and states that the directory was successfully created).
ubuntu@ip-172-31-1-136:~$ /home/ubuntu/metAMOS-1.5rc3/runPipeline -t -q YES -a idba-ud -o 20 -m bowtie2 -b YES -u YES -p 128 -d /home/ubuntu/Result/ab
project dir does not exist!
usage: runPipeline [options] -d projectdir
-h = : print help [this message]
-j = : just output all of the programs and citations then exit (default = NO)
-v = : verbose output? (default = NO)
-d = : directory created by initPipeline (REQUIRED)
[options]: [pipeline_opts] [misc_opts]
[pipeline_opts]: options that affect the pipeline execution
Pipeline consists of the following steps:
Preprocess, Assemble, FindORFS, MapReads, Abundance, Annotate,
FunctionalAnnotation, Scaffold, Propagate, Classify, Postprocess
Each of these steps can be referred to by the following options:
-f = : force this step to be run (default = NONE)
-s = : start at this step in the pipeline (default = Preprocess)
-e = : end at this step in the pipeline (default = Postprocess)
-n = : step to skip in pipeline (default=NONE)
For each step you can fine-tune the execution as follows
[Preprocess]
-t = : filter input reads? (default = metamos, supported = none,metamos,eautils,pbcr)
-q = : produce FastQC quality report for reads with quality information (fastq or sff)? (default = NO)
[Assemble]
-a = : genome assembler to use (default = soapdenovo, supported = newbler,soapdenovo,soapdenovo2,ca,velvet,velvet-sc,metavelvet,metaidba,sparseassembler,minimus,abyss,edena,spades,mira,sga,idba-ud,ray,masurca)
-k = : k-mer size to be used for assembly (default = 31)
-o = >: min overlap length
[MapReads]
-m = : read mapper to use? (default = bowtie, supported = bowtie,bowtie2)
-i = : save bowtie (i)ndex? (default = NO)
-b = : create library specific per bp coverage of assembled contigs (default = NO)
[FindORFS]
-g = : gene caller to use (default = fraggenescan, supported = fraggenescan,metagenemark,glimmermg)
-l = : min contig length to use for ORF call (default = 300)
-x = >: min contig coverage to use for ORF call (default = 3X)
[Validate]
-X = : comma-separated list of validators to run on the assembly. (default = lap, supported = reapr,orf,lap,ale,quast,frcbam,freebayes,cgal,n50)
-S = : comma-separated list of scores to use to select the winning assembly. By default, all validation tools specified by -X will be run. For each score, an optional weight can be specified as SCORE:WEIGHT. For example, LAP:1,CGAL:2 (supported = all,lap,ale,cgal,snp,frcbam,orf,reapr,n50)
[Annotate]
-c = : classifier to use for annotation (default = kraken, supported = fcp,phylosift,phmmer,blast,metaphyler,phymm,kraken
-u = : annotate unassembled reads? (default = NO)
[Classify]
-z = : taxonomic level to categorize at (default = class)
[misc_opts]: Miscellaneous options
-B = : blast DBs not available (default = NO)
-r = : retain the AMOS bank? (default = NO)
-p = : number of threads to use (be greedy!) (default=1)
-4 = : 454 data? (default = NO)
-L = : generate local Krona plots. Local Krona plots can only be viewed on the machine they are generated on but will work on a system with no internet connection (default = NO)
ubuntu@ip-172-31-1-136:~$ /home/ubuntu/metAMOS-1.5rc3/runPipeline -t -q YES -a idba-ud -o 20 -m bowtie2 -b YES -u YES -p 128 -d /home/ubuntu/Result/Abalone/
project dir does not exist!
usage: runPipeline [options] -d projectdir
-h = : print help [this message]
-j = : just output all of the programs and citations then exit (default = NO)
-v = : verbose output? (default = NO)
-d = : directory created by initPipeline (REQUIRED)
[options]: [pipeline_opts] [misc_opts]
[pipeline_opts]: options that affect the pipeline execution
Pipeline consists of the following steps:
Preprocess, Assemble, FindORFS, MapReads, Abundance, Annotate,
FunctionalAnnotation, Scaffold, Propagate, Classify, Postprocess
Each of these steps can be referred to by the following options:
-f = : force this step to be run (default = NONE)
-s = : start at this step in the pipeline (default = Preprocess)
-e = : end at this step in the pipeline (default = Postprocess)
-n = : step to skip in pipeline (default=NONE)
For each step you can fine-tune the execution as follows
[Preprocess]
-t = : filter input reads? (default = metamos, supported = none,metamos,eautils,pbcr)
-q = : produce FastQC quality report for reads with quality information (fastq or sff)? (default = NO)
[Assemble]
-a = : genome assembler to use (default = soapdenovo, supported = newbler,soapdenovo,soapdenovo2,ca,velvet,velvet-sc,metavelvet,metaidba,sparseassembler,minimus,abyss,edena,spades,mira,sga,idba-ud,ray,masurca)
-k = : k-mer size to be used for assembly (default = 31)
-o = >: min overlap length
[MapReads]
-m = : read mapper to use? (default = bowtie, supported = bowtie,bowtie2)
-i = : save bowtie (i)ndex? (default = NO)
-b = : create library specific per bp coverage of assembled contigs (default = NO)
[FindORFS]
-g = : gene caller to use (default = fraggenescan, supported = fraggenescan,metagenemark,glimmermg)
-l = : min contig length to use for ORF call (default = 300)
-x = >: min contig coverage to use for ORF call (default = 3X)
[Validate]
-X = : comma-separated list of validators to run on the assembly. (default = lap, supported = reapr,orf,lap,ale,quast,frcbam,freebayes,cgal,n50)
-S = : comma-separated list of scores to use to select the winning assembly. By default, all validation tools specified by -X will be run. For each score, an optional weight can be specified as SCORE:WEIGHT. For example, LAP:1,CGAL:2 (supported = all,lap,ale,cgal,snp,frcbam,orf,reapr,n50)
[Annotate]
-c = : classifier to use for annotation (default = kraken, supported = fcp,phylosift,phmmer,blast,metaphyler,phymm,kraken
-u = : annotate unassembled reads? (default = NO)
[Classify]
-z = : taxonomic level to categorize at (default = class)
[misc_opts]: Miscellaneous options
-B = : blast DBs not available (default = NO)
-r = : retain the AMOS bank? (default = NO)
-p = : number of threads to use (be greedy!) (default=1)
-4 = : 454 data? (default = NO)
-L = : generate local Krona plots. Local Krona plots can only be viewed on the machine they are generated on but will work on a system with no internet connection (default = NO)
Thank you for your help!!
The text was updated successfully, but these errors were encountered: