# The path of the database file.
dbPath: "/etc/fan2go/fan2go.db"
# Allow the fan initialization sequence to run in parallel for all configured fans
runFanInitializationInParallel: false
# The rate to poll temperature sensors at.
tempSensorPollingRate: 200ms
# The number of sensor items to keep in a rolling window array.
rollingWindowSize: 50
# The rate to poll fan RPM input sensors at.
rpmPollingRate: 1s
# The rate to update fan speed targets at.
controllerAdjustmentTickRate: 200ms

# A list of sensors to monitor.
sensors:
  # A user defined ID, which is used to reference a
  # a sensor in a fan configuration (see below)
  - id: cpu_package
    # The controller platform as displayed by `fan2go detect`, f.ex.:
    # "nouveau", "coretemp" or "it8620" etc.
    platform: k10temp
    # The index of this sensor as displayed by `fan2go detect`.
    index: 1
    # The minimum target temp for this sensor.
    # If the sensor falls below this value, all fans referencing it
    # will run at minimum PWM value.
    min: 50
    # The maximum target temp for this sensor.
    # If the sensor is above this value, all fans referencing it
    # will run at maximum PWM value.
    max: 75

# A list of fans to control.
fans:
  # An user defined ID.
  # Used for logging only.
  - id: cpu_fan
    # The platform of the controller which is
    # connected to this fan (see sensor.platform above).
    platform: nct6793
    # The index of this fan as displayed by `fan2go detect`.
    fan: 2 # CPU Fan
    # Indicates whether this fan is allowed to fully stop.
    neverStop: yes
    # The sensor ID (defined above) that should be used to determine the
    # speed of this fan.
    sensor: cpu_pacakge