Skip to content
Converter board for the Atmel JTAGICE3
Branch: master
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
img
JTAGICE3.kicad_pcb
JTAGICE3.sch
README.md

README.md

Pinoccio JTAG backpack

This repository contains the schematic and board files for a converter board to be mounted on top of the Atmel JTAGICE3 programmer, to allow using bigger 2.54mm connector flatcables whenever possible and reduce the chance of breaking the fragile 1.27mm connector flatcable.

This project is created using Kicad. The board design was intended as a single-layer design, with the back layer emulated using wire bridges (so the vias have a big drill size - be sure to double-check that if you produce this as a proper double-layer design). There's also some other caveats, for those and more background, see this blogpost.

Finished board

License

All content in this repository is licensed under the "Beluki" license:

Permission is hereby granted, free of charge, to anyone obtaining a copy of this document and accompanying files, to do whatever they want with them without any restriction, including, but not limited to, copying, modification and redistribution.

NO WARRANTY OF ANY KIND IS PROVIDED.

You can’t perform that action at this time.