Permalink
Fetching contributors…
Cannot retrieve contributors at this time
211 lines (182 sloc) 10.9 KB
#ifndef SHARED_MEMORY_H_
#define SHARED_MEMORY_H_
/* SHM (Shared Memory) offsets */
/* Host-side routing values for the SHM.
* This is only useful for the initvals */
#define HOST_SHM_UCODE 0
#define HOST_SHM_SHARED 1
#define HOST_SHM_SCRATCH 2
#define HOST_SHM_IHR 3
#define HOST_SHM_RCMTA 4
/* Macro to convert a host-SHM-address to a microcode-SHM-address.
* This also asserts that the address is word aligned. */
#define SHM(address) (((address) / 2) + \
(%assert((address & 1) == 0)))
/* Macro to convert a byte-offset into a microcode-SHM-word-offset.
* This does the same as SHM(), but is used to mark offsets that are not
* based on absolute zero, but relative. */
#define SHM_OFFSET(offset) SHM(offset)
/* BEGIN ABI: Start of the driver ABI definitions */
/* Misc variables */
#define SHM_WLCOREREV SHM(0x016) /* 802.11 core revision */
#define SHM_PCTLWDPOS SHM(0x008)
#define SHM_RXPADOFF SHM(0x034) /* RX Padding data offset (PIO only) */
#define SHM_PHYVER SHM(0x050) /* PHY version */
#define SHM_PHYTYPE SHM(0x052) /* PHY type */
#define SHM_ANTSWAP SHM(0x05C) /* Antenna swap threshold */
// New SHM addresses; Source: d11.h 578947 2015-08-13 04:46:06Z
// http://github.com/tuapuikia/asuswrt-phantom/blob/master/release/src-rt-7.14.114.x/src/include/d11.h
/* Host flags to turn on ucode options */
#define SHM_HOST_FLAGS1 SHM(0x05E)
#define SHM_HOST_FLAGS1_ANTDIVHELP 0 /* bit0: ucode antenna div helper */
#define SHM_HOST_FLAGS1_SYMW 1 /* bit1: G-PHY SYM workaround */
#define SHM_HOST_FLAGS1_RXPULLW 2 /* bit2: RX pullup workaround */
#define SHM_HOST_FLAGS1_CCKBOOST 3 /* bit3: 4dB CCK power boost (exclusive with OFDM boost) */
#define SHM_HOST_FLAGS1_BTCOEX 4 /* bit4: Bluetooth coexistence */
#define SHM_HOST_FLAGS1_GDCW 5 /* bit5: G-PHY DC canceller filter bw workaround */
#define SHM_HOST_FLAGS1_OFDMPABOOST 6 /* bit6: Enable PA gain boost for OFDM */
#define SHM_HOST_FLAGS1_ACPR 7 /* bit7: Disable for Japan, channel 14 */
#define SHM_HOST_FLAGS1_EDCF 8 /* bit8: on if WME and MAC suspended */
#define SHM_HOST_FLAGS1_TSSIRPSMW 9 /* bit9: TSSI reset PSM ucode workaround */
#define SHM_HOST_FLAGS1_20IN40IQW 9 /* bit9: 20 in 40 MHz I/Q workaround (rev >= 13 only) */
#define SHM_HOST_FLAGS1_DSCRQ 10 /* bit10: Disable slow clock request in ucode */
#define SHM_HOST_FLAGS1_ACIW 11 /* bit11: ACI workaround: shift bits by 2 on PHY CRS */
#define SHM_HOST_FLAGS1_2060W 12 /* bit12: 2060 radio workaround */
#define SHM_HOST_FLAGS1_RADARW 13 /* bit13: Radar workaround */
#define SHM_HOST_FLAGS1_USEDEFKEYS 14 /* bit14: Enable use of default keys */
#define SHM_HOST_FLAGS1_AFTERBURNER 15 /* bit15: Afterburner enabled */
#define SHM_HOST_FLAGS2 SHM(0x060)
#define SHM_HOST_FLAGS2_BT4PRIOCOEX 0 /* bit0: Bluetooth 4-priority coexistence */
#define SHM_HOST_FLAGS2_FWKUP 1 /* bit1: Fast wake-up ucode */
#define SHM_HOST_FLAGS2_VCORECALC 2 /* bit2: Force VCO recalculation when powering up synthpu */
#define SHM_HOST_FLAGS2_PCISCW 3 /* bit3: PCI slow clock workaround */
#define SHM_HOST_FLAGS2_4318TSSI 5 /* bit5: 4318 TSSI */
#define SHM_HOST_FLAGS2_FBCMCFIFO 6 /* bit6: Flush bcast/mcast FIFO immediately */
#define SHM_HOST_FLAGS2_HWPCTL 7 /* bit7: Enable hardware power control */
#define SHM_HOST_FLAGS2_BTCOEXALT 8 /* bit8: Bluetooth coexistence in alternate pins */
#define SHM_HOST_FLAGS2_TXBTCHECK 9 /* bit9: Bluetooth check during transmission */
#define SHM_HOST_FLAGS2_SKCFPUP 10 /* bit10: Skip CFP update */
#define SHM_HOST_FLAGS2_N40W 11 /* bit11: N PHY 40 MHz workaround (rev >= 13 only) */
#define SHM_HOST_FLAGS2_ANTSEL 13 /* bit13: Antenna selection (for testing antenna div.) */
#define SHM_HOST_FLAGS2_BT3COEXT 13 /* bit13: Bluetooth 3-wire coexistence (rev >= 13 only) */
#define SHM_HOST_FLAGS2_BTCANT 14 /* bit14: Bluetooth coexistence (antenna mode) (rev >= 13 only) */
#define SHM_HOST_FLAGS3 SHM(0x062)
#define SHM_HOST_FLAGS3_ANTSELEN 0 /* bit0: Antenna selection enabled (rev >= 13 only) */
#define SHM_HOST_FLAGS3_ANTSELMODE 1 /* bit1: Antenna selection mode (rev >= 13 only) */
#define SHM_HOST_FLAGS3_MLADVW 4 /* bit4: N PHY ML ADV workaround (rev >= 13 only) */
#define SHM_HOST_FLAGS3_PR45960W 11 /* bit11: PR 45960 workaround (rev >= 13 only) */
#define SHM_HOST_FLAGS4 SHM(0x078)
#define SHM_HOST_FLAGS5 SHM(0x0D4)
#define SHM_RFATT SHM(0x064) /* Current radio attenuation value */
#define SHM_RADAR SHM(0x066) /* Radar register */
#define SHM_PHYTXNOI SHM(0x06E) /* PHY noise directly after TX (lower 8bit only) */
#define SHM_RFRXSP1 SHM(0x072) /* RF RX SP Register 1 */
#define SHM_CHAN SHM(0x0A0) /* Current channel (low 8bit only) */
#define SHM_GCLASSCTL SHM(0x0A6) /* Value for the G-PHY classify control register */
#define SHM_BCMCFIFOID SHM(0x108) /* Last posted cookie to the bcast/mcast FIFO */
/* TSSI information */
#define SHM_TSSI_CCK_LO SHM(0x058) /* TSSI for the last 4 CCK frames (low) */
#define SHM_TSSI_CCK_HI SHM(0x05A) /* TSSI for the last 4 CCK frames (high) */
#define SHM_TSSI_OFDM_A_LO SHM(0x068) /* TSSI for the last 4 OFDM (A) frames (low) */
#define SHM_TSSI_OFDM_A_HI SHM(0x06A) /* TSSI for the last 4 OFDM (A) frames (high) */
#define SHM_TSSI_OFDM_G_LO SHM(0x070) /* TSSI for the last 4 OFDM (G) frames (low) */
#define SHM_TSSI_OFDM_G_HI SHM(0x072) /* TSSI for the last 4 OFDM (G) frames (high) */
/* TX FIFO variables */
#define SHM_TXFIFO_SIZE01 SHM(0x098) /* TX FIFO size for FIFO 0 (low) and 1 (high) */
#define SHM_TXFIFO_SIZE23 SHM(0x09A) /* TX FIFO size for FIFO 2 and 3 */
#define SHM_TXFIFO_SIZE45 SHM(0x09C) /* TX FIFO size for FIFO 4 and 5 */
#define SHM_TXFIFO_SIZE67 SHM(0x09E) /* TX FIFO size for FIFO 6 and 7 */
/* Background noise */
#define SHM_JSSI0 SHM(0x088) /* Measure JSSI 0 */
#define SHM_JSSI1 SHM(0x08A) /* Measure JSSI 1 */
#define SHM_JSSIAUX SHM(0x08C) /* Measure JSSI AUX */
/* Crypto engine */
#define SHM_DEFAULTIV SHM(0x03C) /* Default IV location */
#define SHM_NRRXTRANS SHM(0x03E) /* # of soft RX transmitter addresses (max 8) */
#define SHM_KTP SHM(0x056) /* Key table pointer */
#define SHM_TKIP_P1KEYS SHM(0x2E0) /* TKIP Phase 1 keys. */
#define SHM_KEYIDXBLOCK SHM(0x5D4) /* Key index/algorithm block. */
/* WME variables */
#define SHM_EDCFSTAT SHM(0x00E) /* EDCF status */
#define SHM_TXFCUR SHM(0x030) /* TXF current index */
#define SHM_EDCFQ SHM(0x240) /* EDCF Q info */
/* Powersave mode related variables */
#define SHM_SLOTT SHM(0x010) /* Slot time */
#define SHM_DTIMPER SHM(0x012) /* DTIM period */
#define SHM_NOSLPZNATDTIM SHM(0x04C) /* NOSLPZNAT DTIM */
/* Beacon/AP variables */
#define SHM_BTL0 SHM(0x018) /* Beacon template length 0 */
#define SHM_BTL1 SHM(0x01A) /* Beacon template length 1 */
#define SHM_BTSFOFF SHM(0x01C) /* Beacon TSF offset */
#define SHM_TIMBPOS SHM(0x01E) /* TIM B position in beacon */
#define SHM_DTIMP SHM(0x012) /* DTIP period */
#define SHM_MCASTCOOKIE SHM(0x0A8) /* Last bcast/mcast frame ID */
#define SHM_SFFBLIM SHM(0x044) /* Short frame fallback retry limit */
#define SHM_LFFBLIM SHM(0x046) /* Long frame fallback retry limit */
#define SHM_BEACPHYCTL SHM(0x054) /* Beacon PHY TX control word (see PHY TX control) */
#define SHM_EXTNPHYCTL SHM(0x0B0) /* Extended bytes for beacon PHY control (N) */
/* ACK/CTS control */
#define SHM_ACKCTSPHYCTL SHM(0x022) /* ACK/CTS PHY control word (see PHY TX control) */
/* Probe response variables */
#define SHM_PRSSID SHM(0x160) /* Probe Response SSID */
#define SHM_PRSSIDLEN SHM(0x048) /* Probe Response SSID length */
#define SHM_PRTLEN SHM(0x04A) /* Probe Response template length */
#define SHM_PRMAXTIME SHM(0x074) /* Probe Response max time */
#define SHM_PRPHYCTL SHM(0x188) /* Probe Response PHY TX control word */
/* Rate tables */
#define SHM_OFDMDIRECT SHM(0x1C0) /* Pointer to OFDM direct map */
#define SHM_OFDMBASIC SHM(0x1E0) /* Pointer to OFDM basic rate map */
#define SHM_CCKDIRECT SHM(0x200) /* Pointer to CCK direct map */
#define SHM_CCKBASIC SHM(0x220) /* Pointer to CCK basic rate map */
/* Microcode soft registers */
#define SHM_UCODEREV SHM(0x000) /* Microcode revision */
#define SHM_UCODEPATCH SHM(0x002) /* Microcode patchlevel */
#define SHM_UCODEDATE SHM(0x004) /* Microcode date */
#define SHM_UCODETIME SHM(0x006) /* Microcode time */
#define SHM_UCODESTAT SHM(0x040) /* Microcode debug status code */
#define SHM_UCODESTAT_INVALID 0
#define SHM_UCODESTAT_INIT 1
#define SHM_UCODESTAT_ACTIVE 2
#define SHM_UCODESTAT_SUSP 3 /* suspended */
#define SHM_UCODESTAT_SLEEP 4 /* asleep (PS) */
#define SHM_MAXBFRAMES SHM(0x080) /* Maximum number of frames in a burst */
#define SHM_SPUWKUP SHM(0x094) /* pre-wakeup for synth PU in us */
#define SHM_PRETBTT SHM(0x096) /* pre-TBTT in us */
/* TX header WORD(!) offsets. These are used as offsets into the TX header
* information fields in SHM for each FIFO via offset register pointer. */
#define TXHDR_MACLO SHM_OFFSET(0x00) /* MAC control lo */
#define TXHDR_MACLO_DFCS 6 /* bit6: Do not generate FCS */
#define TXHDR_MACHI SHM_OFFSET(0x02) /* MAC control hi */
#define TXHDR_FCTL SHM_OFFSET(0x04) /* Frame Control field copy */
#define TXHDR_FES SHM_OFFSET(0x06) /* TX FES Time Normal */
#define TXHDR_PHYCTL SHM_OFFSET(0x08) /* PHY control word */
#define TXHDR_PHYCTL1 SHM_OFFSET(0x0A) /* PHY control word 1 */
#define TXHDR_PHYCTL1FB SHM_OFFSET(0x0C) /* PHY control word 1 for fallback */
#define TXHDR_PHYCTL1RTS SHM_OFFSET(0x0E) /* PHY control word 1 RTS */
#define TXHDR_PHYCTL1RTSFB SHM_OFFSET(0x10) /* PHY control word 1 RTS for fallback */
#define TXHDR_PHYRATES SHM_OFFSET(0x12) /* PHY rates */
#define TXHDR_EFT SHM_OFFSET(0x14) /* Extra Frame Types */
#define TXHDR_IV SHM_OFFSET(0x16) /* IV / crypto field */
#define TXHDR_RA SHM_OFFSET(0x26) /* Frame receiver address */
#define TXHDR_FESFB SHM_OFFSET(0x2C) /* TX FES Time fallback */
#define TXHDR_RTSPLCPFB SHM_OFFSET(0x2E) /* RTS PLCP fallback */
#define TXHDR_RTSDURFB SHM_OFFSET(0x34) /* RTS duration fallback */
#define TXHDR_PLCPFB SHM_OFFSET(0x36) /* PLCP fallback */
#define TXHDR_DURFB SHM_OFFSET(0x3C) /* Duration fallback */
#define TXHDR_MIMOML SHM_OFFSET(0x3E) /* MIMO mode length */
#define TXHDR_MIMOFBRL SHM_OFFSET(0x40) /* MIMO fallback rate length */
#define TXHDR_TOLO SHM_OFFSET(0x42) /* Timeout low */
#define TXHDR_TOHI SHM_OFFSET(0x44) /* Timeout high */
#define TXHDR_MIMOAS SHM_OFFSET(0x46) /* MIMO antenna select */
#define TXHDR_PRELSZ SHM_OFFSET(0x48) /* Preload size */
#define TXHDR_UNUSED1 SHM_OFFSET(0x4A) /* Unused padding */
#define TXHDR_COOKIE SHM_OFFSET(0x4C) /* Frame ID */
#define TXHDR_STAT SHM_OFFSET(0x4E) /* Status */
#define TXHDR_RTSPLCP SHM_OFFSET(0x50) /* RTS PLCP header */
#define TXHDR_RTS SHM_OFFSET(0x56) /* RTS frame */
#define TXHDR_UNUSED2 SHM_OFFSET(0x66) /* Unused padding */
#define TXHDR_WSIZE (104 / 2) /* Header size, in words */
#define TXHDR_NR_COPY_BYTES (TXHDR_RTSPLCP * 2) /* We copy everything up to the RTS header to SHM */
/* END ABI: End of the driver ABI definitions */
#endif /* SHARED_MEMORY_H_ */
// vim: syntax=b43 ts=8