Bench power supply with adjustable voltage and current limits.
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
README.md
lab_supply_monitor.ino

README.md

lab_supply

Overview

Arduino code to control the display of measured and setpoint current and voltage to an LCD as part of my bench power supply

  • 4 analog input chanels are used to monitor the 4 signals (measured and setpoint current and voltage)
  • The values are output to a 20x4 charcter LCD display
  • There is a separate calibrate mode which displays the raw measured voltages at each pin
  • The actual voltage and current must be measured on a multimeter and divided by the display values to get the calibration factors.