Skip to content

HTTPS clone URL

Subversion checkout URL

You can clone with HTTPS or Subversion.

Download ZIP
Fetching contributors…

Cannot retrieve contributors at this time

232 lines (203 sloc) 5.832 kb
/*
* Copyright (c) 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that: (1) source code distributions
* retain the above copyright notice and this paragraph in its entirety, (2)
* distributions including binary code include the above copyright notice and
* this paragraph in its entirety in the documentation or other materials
* provided with the distribution, and (3) all advertising materials mentioning
* features or use of this software display the following acknowledgement:
* ``This product includes software developed by the University of California,
* Lawrence Berkeley Laboratory and its contributors.'' Neither the name of
* the University nor the names of its contributors may be used to endorse
* or promote products derived from this software without specific prior
* written permission.
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
*/
#ifndef lint
static const char rcsid[] _U_ =
"@(#) $Header: /tcpdump/master/tcpdump/print-sll.c,v 1.19 2005-11-13 12:12:43 guy Exp $ (LBL)";
#endif
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <tcpdump-stdinc.h>
#include <stdio.h>
#include <string.h>
#include <pcap.h>
#include "interface.h"
#include "addrtoname.h"
#include "ethertype.h"
#include "extract.h"
#include "ether.h"
#include "sll.h"
const struct tok sll_pkttype_values[] = {
{ LINUX_SLL_HOST, "In" },
{ LINUX_SLL_BROADCAST, "B" },
{ LINUX_SLL_MULTICAST, "M" },
{ LINUX_SLL_OTHERHOST, "P" },
{ LINUX_SLL_OUTGOING, "Out" },
{ 0, NULL}
};
static inline void
sll_print(register const struct sll_header *sllp, u_int length)
{
u_short ether_type;
printf("%3s ",tok2str(sll_pkttype_values,"?",EXTRACT_16BITS(&sllp->sll_pkttype)));
/*
* XXX - check the link-layer address type value?
* For now, we just assume 6 means Ethernet.
* XXX - print others as strings of hex?
*/
if (EXTRACT_16BITS(&sllp->sll_halen) == 6)
(void)printf("%s ", etheraddr_string(sllp->sll_addr));
if (!qflag) {
ether_type = EXTRACT_16BITS(&sllp->sll_protocol);
if (ether_type <= ETHERMTU) {
/*
* Not an Ethernet type; what type is it?
*/
switch (ether_type) {
case LINUX_SLL_P_802_3:
/*
* Ethernet_802.3 IPX frame.
*/
(void)printf("802.3");
break;
case LINUX_SLL_P_802_2:
/*
* 802.2.
*/
(void)printf("802.2");
break;
default:
/*
* What is it?
*/
(void)printf("ethertype Unknown (0x%04x)",
ether_type);
break;
}
} else {
(void)printf("ethertype %s (0x%04x)",
tok2str(ethertype_values, "Unknown", ether_type),
ether_type);
}
(void)printf(", length %u: ", length);
}
}
/*
* This is the top level routine of the printer. 'p' points to the
* Linux "cooked capture" header of the packet, 'h->ts' is the timestamp,
* 'h->len' is the length of the packet off the wire, and 'h->caplen'
* is the number of bytes actually captured.
*/
u_int
sll_if_print(const struct pcap_pkthdr *h, const u_char *p)
{
u_int caplen = h->caplen;
u_int length = h->len;
register const struct sll_header *sllp;
u_short ether_type;
u_short extracted_ethertype;
if (caplen < SLL_HDR_LEN) {
/*
* XXX - this "can't happen" because "pcap-linux.c" always
* adds this many bytes of header to every packet in a
* cooked socket capture.
*/
printf("[|sll]");
return (caplen);
}
sllp = (const struct sll_header *)p;
if (eflag)
sll_print(sllp, length);
/*
* Go past the cooked-mode header.
*/
length -= SLL_HDR_LEN;
caplen -= SLL_HDR_LEN;
p += SLL_HDR_LEN;
ether_type = EXTRACT_16BITS(&sllp->sll_protocol);
recurse:
/*
* Is it (gag) an 802.3 encapsulation, or some non-Ethernet
* packet type?
*/
if (ether_type <= ETHERMTU) {
/*
* Yes - what type is it?
*/
switch (ether_type) {
case LINUX_SLL_P_802_3:
/*
* Ethernet_802.3 IPX frame.
*/
ipx_print(p, length);
break;
case LINUX_SLL_P_802_2:
/*
* 802.2.
* Try to print the LLC-layer header & higher layers.
*/
if (llc_print(p, length, caplen, NULL, NULL,
&extracted_ethertype) == 0)
goto unknown; /* unknown LLC type */
break;
default:
extracted_ethertype = 0;
/*FALLTHROUGH*/
unknown:
/* ether_type not known, print raw packet */
if (!eflag)
sll_print(sllp, length + SLL_HDR_LEN);
if (extracted_ethertype) {
printf("(LLC %s) ",
etherproto_string(htons(extracted_ethertype)));
}
if (!suppress_default_print)
default_print(p, caplen);
break;
}
} else if (ether_type == ETHERTYPE_8021Q) {
/*
* Print VLAN information, and then go back and process
* the enclosed type field.
*/
if (caplen < 4 || length < 4) {
printf("[|vlan]");
return (SLL_HDR_LEN);
}
if (eflag) {
u_int16_t tag = EXTRACT_16BITS(p);
printf("vlan %u, p %u%s, ",
tag & 0xfff,
tag >> 13,
(tag & 0x1000) ? ", CFI" : "");
}
ether_type = EXTRACT_16BITS(p + 2);
if (ether_type <= ETHERMTU)
ether_type = LINUX_SLL_P_802_2;
if (!qflag) {
(void)printf("ethertype %s, ",
tok2str(ethertype_values, "Unknown", ether_type));
}
p += 4;
length -= 4;
caplen -= 4;
goto recurse;
} else {
if (ethertype_print(gndo, ether_type, p, length, caplen) == 0) {
/* ether_type not known, print raw packet */
if (!eflag)
sll_print(sllp, length + SLL_HDR_LEN);
if (!suppress_default_print)
default_print(p, caplen);
}
}
return (SLL_HDR_LEN);
}
Jump to Line
Something went wrong with that request. Please try again.