Skip to content
Permalink
Branch: master
Find file Copy path
Find file Copy path
Fetching contributors…
Cannot retrieve contributors at this time
248 lines (221 sloc) 10.7 KB
ODROIDXU-UBOOT-CONFIG
# U-Boot Parameters
setenv initrd_high "0xffffffff"
setenv fdt_high "0xffffffff"
# Mac address configuration
setenv macaddr "00:1e:06:61:7a:39"
#------------------------------------------------------------------------------------------------------
# Basic Ubuntu Setup. Don't touch unless you know what you are doing.
# --------------------------------
setenv bootrootfs "console=tty1 console=ttySAC2,115200n8 root=UUID=e139ce78-9841-40fe-8823-96a304a09859 rootwait ro fsck.repair=yes net.ifnames=0"
# --- Screen Configuration for HDMI --- #
# ---------------------------------------
# Uncomment only ONE line! Leave all commented for automatic selection.
# Uncomment only the setenv line!
# ---------------------------------------
# ODROID-VU forced resolution
# setenv videoconfig "video=HDMI-A-1:1280x800@60"
# -----------------------------------------------
# ODROID-VU forced EDID
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x800.bin"
# -----------------------------------------------
# 1920x1200 60hz without monitor data using generic information
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1200_60hz.bin"
# -----------------------------------------------
# 1920x1200 30hz without monitor data using generic information
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1200_30hz.bin"
# -----------------------------------------------
# 1920x1080 (1080P) with monitor provided EDID information. (1080p-edid)
# setenv videoconfig "video=HDMI-A-1:1920x1080@60"
# -----------------------------------------------
# 1920x1080 (1080P) without monitor data using generic information (1080p-noedid)
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080.bin"
# -----------------------------------------------
# 1920x1080 50hz (1080P) with monitor provided EDID information. (1080p 50hz-edid)
# setenv videoconfig "video=HDMI-A-1:1920x1080@50"
# -----------------------------------------------
# 1920x1080 50hz (1080P) without monitor data using generic information (1080p 50hz-noedid)
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080_50hz.bin"
# -----------------------------------------------
# 1680x1050 without monitor data using generic information
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1680x1050.bin"
# -----------------------------------------------
# 1600x1200 without monitor data using generic information
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1600x1200.bin"
# -----------------------------------------------
# 1600x900 without monitor data using generic information
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1600x900.bin"
# -----------------------------------------------
# 1440x900 with monitor provided EDID information.
# setenv videoconfig "video=HDMI-A-1:1440x900@60"
# -----------------------------------------------
# 1440x900 without monitor data using generic information
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1440x900.bin"
# -----------------------------------------------
# 1366x768 without monitor data using generic information
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1366x768.bin"
# -----------------------------------------------
# 1360x768 without monitor data using generic information
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1360x768.bin"
# -----------------------------------------------
# 1280x1024 without monitor data using generic information
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x1024.bin"
# -----------------------------------------------
# 1280x720 (720P) with monitor provided EDID information. (720p-edid)
# setenv videoconfig "video=HDMI-A-1:1280x720@60"
# -----------------------------------------------
# 1280x720 (720P) without monitor data using generic information (720p-noedid)
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x720.bin"
# -----------------------------------------------
# 1024x768 without monitor data using generic information
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x768.bin"
# -----------------------------------------------
# 1024x600 without monitor data using generic information (ODROID VU7+)
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x600.bin"
# -----------------------------------------------
# 800x600 without monitor data using generic information
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x600.bin"
# -----------------------------------------------
# 800x480 without monitor data using generic information (ODROID 7")
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x480.bin"
# -----------------------------------------------
# 720x576 without monitor data using generic information
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x576.bin"
# -----------------------------------------------
# 720x480 without monitor data using generic information
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x480.bin"
# -----------------------------------------------
# 640x480 without monitor data using generic information
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/640x480.bin"
# -----------------------------------------------
# 480x800 without monitor data using generic information
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/480x800.bin"
# -----------------------------------------------
# 480x320 without monitor data using generic information
# setenv videoconfig "drm_kms_helper.edid_firmware=edid/480x320.bin"
# --- HDMI / DVI Mode Selection ---
# ------------------------------------------
# - HDMI Mode
setenv vout "hdmi"
# - DVI Mode (disables sound over HDMI as per DVI compat)
# setenv vout "dvi"
# --- HDMI CEC Configuration ---
# ------------------------------------------
setenv cecenable "false" # false or true
# set to true to enable HDMI CEC
# --- CPU Governor Setup ---
# Uncomment only one line. New governor is set after 90secs after boot.
# ------------------------------------------
# - Performance (Keep all the CPU's at Maximum frequency)
setenv governor "performance"
# ------------------------------------------
# - Ondemand
# setenv governor "ondemand"
# ------------------------------------------
# - Interactive (Pretty much just like ondemand with more possible customization via sysfs.)
# setenv governor "interactive"
# ------------------------------------------
# - Conservative (Like ondemand, but do the frequency transitions more slowly, great for battery powered applications)
# setenv governor "conservative"
# ------------------------------------------
# - Powersave (Keeps the CPU's to the lowest possible temps)
# setenv governor "powersave"
# Enable/Disable ODROID-VU7 Touchsreen
setenv disable_vu7 "false" # false
#------------------------------------------------------------------------------
#
# HDMI-PHY Parameter Control
#
#------------------------------------------------------------------------------
#------------------------------------------------------------------------------
#
# HDMI Hot Plug detection
#
#------------------------------------------------------------------------------
#
# Forces the HDMI subsystem to ignore the check if the cable is connected or
# not.
# false : disable the detection and force it as connected.
# true : let cable, board and monitor decide the connection status.
#
# default: true
#
#------------------------------------------------------------------------------
setenv HPD "true"
#------------------------------------------------------------------------------
#
# TMDS data amplitude control.
#
#------------------------------------------------------------------------------
#
# 1LSB corresponds to 20 mVdiff amplitude level.
# tx_amp_lvl : 0 = 760 mVdiff(Min), 31 = 1380 mVdiff(Max)
#
# Hardkernel default hdmi_tx_amp_lvl = 31(1380 mVdiff);
#------------------------------------------------------------------------------
setenv hdmi_tx_amp_lvl "31"
#------------------------------------------------------------------------------
#
# TMDS data amplitude fine control for each channel.
#
#------------------------------------------------------------------------------
#
# 1LSB corresponds to 20 mVdiff amplitude level.
# tx_lvl : 0 = 0 mVdiff(Min), 3 = 60 mVdiff(Max)
#
# Hardkernel default
# hdmi_tx_lvl_ch0 = 3, hdmi_tx_lvl_ch1 = 3, hdmi_tx_lvl_ch2 = 3,
#------------------------------------------------------------------------------
setenv hdmi_tx_lvl_ch0 "3"
setenv hdmi_tx_lvl_ch1 "3"
setenv hdmi_tx_lvl_ch2 "3"
#------------------------------------------------------------------------------
#
# TMDS data pre-emphasis level control.
#
#------------------------------------------------------------------------------
#
# 1LSB corresponds to -0.45dB emphasis level except for 1
# tx_emp_lvl : 0 = 0 db(Min), 1 = -0.25 db, 2 = 0.7 db, 15 = -7.45 db(Max)
#
# Hardkernel default hdmi_tx_emp_lvl = 6 (-2.50 db);
#------------------------------------------------------------------------------
setenv hdmi_tx_emp_lvl "6"
#------------------------------------------------------------------------------
#
# TMDS clock amplitude control.
#
#------------------------------------------------------------------------------
#
# 1LSB corresponds to 20 mVdiff amplitude level.
# clk_amp_lvl : 0 = 790 mVdiff(Min), 31 = 1410 mVdiff(Max)
#
# Hardkernel default hdmi_clk_amp_lvl = 31 (1410 mVdiff)
#------------------------------------------------------------------------------
setenv hdmi_clk_amp_lvl "31"
#------------------------------------------------------------------------------
#
# TMDS data source termination resistor control.
#
#------------------------------------------------------------------------------
#
# tx_res :
# 0 = Source Termination OFF(Min), 1 = 200 ohm, 2 = 300 ohm, 3 = 120 ohm(Max)
#
# Hardkernrel default hdmi_tx_res = 0 (Source Termination OFF)
#------------------------------------------------------------------------------
setenv hdmi_tx_res "0"
#------------------------------------------------------------------------------
setenv hdmi_phy_control "hdmi_tx_amp_lvl=${hdmi_tx_amp_lvl} hdmi_tx_lvl_ch0=${hdmi_tx_lvl_ch0} hdmi_tx_lvl_ch1=${hdmi_tx_lvl_ch1} hdmi_tx_lvl_ch2=${hdmi_tx_lvl_ch2} hdmi_tx_emp_lvl=${hdmi_tx_emp_lvl} hdmi_clk_amp_lvl=${hdmi_clk_amp_lvl} hdmi_tx_res=${hdmi_tx_res} HPD=${HPD} vout=${vout}"
# Load kernel, initrd and dtb in that sequence
fatload mmc 0:1 0x40008000 zImage
fatload mmc 0:1 0x42000000 uInitrd
fatload mmc 0:1 0x44000000 exynos5422-odroidxu3.dtb
# set FDT address
fdt addr 0x44000000
if test "${cecenable}" = "false"; then fdt rm /cec@101B0000; fi
if test "${disable_vu7}" = "false"; then setenv hid_quirks "usbhid.quirks=0x0eef:0x0005:0x0004"; fi
# final boot args
setenv bootargs "${bootrootfs} ${videoconfig} smsc95xx.macaddr=${macaddr} governor=${governor} ${hdmi_phy_control} ${hid_quirks}"
# Boot the board
bootz 0x40008000 0x42000000 0x44000000
You can’t perform that action at this time.