Read this from bottom to top..
01:10 Log Filename: log201701201904.txt
01:10 
01:10 ============================================
01:10 Restart your RC & Aircraft and Enjoy New Mod
01:10 ============================================
01:10 
01:10 Credit to: Ojcze Nasz, SingLag, Argonaise & www.phantompilots.com
Disconnected.
Disconnecting.
01:10 c
01:10
BusyBox v1.22.1 (2015-11-16 16:28:58 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/ # 
01:10 chmod 775 /sbin/watchlog.sh
Connected.
Connecting to 192.168.1.2.
Disconnected.
Disconnecting.
01:09 wlan0 ESSID: "KenP3S"
Access Point: 60:60:1F:05:E0:BD
Mode: Master Channel: 10 (2.457 GHz)
Tx-Power: 24 dBm Link Quality: 70/70
Signal: -27 dBm Noise: -89 dBm
Bit Rate: 55.2 MBit/s
Encryption: WPA2 PSK (CCMP)
Type: nl80211 HW Mode(s): 802.11abgn
Hardware: unknown [Generic MAC80211]
TX power offset: unknown
Frequency offset: unknown
Supports VAPs: yes PHY name: phy0
wlan0.sta1 ESSID: unknown
Access Point: 00:00:00:00:00:00
Mode: Master (VLAN) Channel: 10 (2.457 GHz)
Tx-Power: 24 dBm Link Quality: 70/70
Signal: -10 dBm Noise: -89 dBm
Bit Rate: 52.0 MBit/s
Encryption: none
Type: nl80211 HW Mode(s): 802.11abgn
Hardware: unknown [Generic MAC80211]
TX power offset: unknown
Frequency offset: unknown
Supports VAPs: yes PHY name: phy0
/ # 
01:09 iwinfo
01:09
BusyBox v1.22.1 (2015-11-16 16:28:58 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/ # iw reg set BO
/ # iw dev wlan0 set txpower limit 2400
/ # 
01:09 iwinfo
01:09 iw dev wlan0 set txpower limit 2400
01:09 iw reg set BO
Connected.
Connecting to 192.168.1.1.
Disconnected.
Disconnecting.
01:09 ==================
01:08 File upload OKE
01:08 Checking file ... 
01:07 Update djiled.sh on Aircraft
01:06 Final process ...
01:06 hmod 775 /sbin/watchlog.sh
/ # 
01:06 File upload OKE
01:06 Checking file ... 
01:06 c
01:06
BusyBox v1.22.1 (2015-11-16 16:28:58 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/ # 
01:06 chmod 775 /sbin/watchlog.sh
Connected.
Connecting to 192.168.1.2.
Disconnected.
Disconnecting.
01:06 Update djiled.sh on RC
01:05 / # 
01:05 Final process ...
01:05 hmod 775 /sbin/watchlog.sh
01:05 c
01:05 chmod 775 /sbin/watchlog.sh
01:04 Supports VAPs: yes PHY name: phy0
/ # 
01:04 wlan0 ESSID: "KenP3S"
Access Point: 60:60:1F:05:E0:BD
Mode: Master Channel: 10 (2.457 GHz)
Tx-Power: 17 dBm Link Quality: 70/70
Signal: -27 dBm Noise: -89 dBm
Bit Rate: 54.9 MBit/s
Encryption: WPA2 PSK (CCMP)
Type: nl80211 HW Mode(s): 802.11abgn
Hardware: unknown [Generic MAC80211]
TX power offset: unknown
Frequency offset: unknown
Supports VAPs: yes PHY name: phy0
wlan0.sta1 ESSID: unknown
Access Point: 00:00:00:00:00:00
Mode: Master (VLAN) Channel: 10 (2.457 GHz)
Tx-Power: 17 dBm Link Quality: 70/70
Signal: -11 dBm Noise: -89 dBm
Bit Rate: 52.0 MBit/s
Encryption: none
Type: nl80211 HW Mode(s): 802.11abgn
Hardware: unknown [Generic MAC80211]
TX power offset: unknown
Frequency offset: unknown
01:04 winfo
01:04 i
01:04 iwinfo
01:03 BusyBox v1.22.1 (2015-11-16 16:28:58 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
/ # 
01:03 ==================
01:03 Telnet ready ...
Connected.
Connecting to 192.168.1.1.
01:03 Aircraft Ready ...
01:03 RC Ready ...
Disconnected.
Disconnecting.
01:40 
01:40 Please proceed to STEP 2
01:40 
01:39 File upload OKE
01:39 Checking file ... 
01:39 Upload watchlog.sh to aircraft
01:38 File upload OKE
01:38 Checking file ... 
01:38 Upload watchlog.sh to RC
01:37 File upload OKE
01:37 Checking file ... 
01:37 Configure Telnet to Aircraft
01:36 File upload OKE
01:36 Checking file ... 
01:36 Configure Telnet to RC
01:35 Aircraft Ready ...
01:35 RC Ready ...