telnet

#Cisco IOS test
try: tel = Telnet(login_wait='name: ', password_wait='assword: ', host='192.168.148.26', port=23, user='xxx', passwd='xxx', prompt='>', timeout=5, enable_string='enable', enable_wait='assword:', enable_prompt='#', enable_passwd='xxxx', init_command='term length 0', debuglevel=0) tel.open() tel.set_timeout(600) tel.set_debuglevel(0) ver = tel.run_command('show ver') for line in ver: print line except Exception as e: print 'show run error: ' + str(e)

ver = tel.run_command('show proc cpu | e 0.00')

for line in ver:

print line

ver = tel.run_command('show ip arp')

for line in ver:

print line

tel.close()

#Isam test

isam = Telnet(login_wait='ogin: ', password_wait='assword: ', host='10.165.12.15', port=23, user='isadmin', passwd='xxxxxxx', prompt='#', timeout=5)

isam.open()

ver = isam.run_command('show system cpu-load')

for line in ver:

print line

try:

gpon = Telnet(login_wait='name:', password_wait='assword:', host='192.168.104.24',

                # port=23, user='script', passwd='xxxxxx', prompt='>', timeout=5, 
                # enable_string='enable', enable_prompt='#', init_command='scroll 512')

gpon.open()

ver = gpon.run_command('display board 0')

for line in ver:

print line

except Exception as e:

print e

#Cisco IOS-XR test

try:

crs = Telnet(login_wait='name:', password_wait='assword:', host='192.168.133.249',

port=23, user='xxxxx', passwd='xxxxxx', prompt='#', timeout=5,

init_command='terminal length 0', debuglevel=0)

crs.open()

ver = crs.run_command('show bgp summary')

for line in ver:

print line

except IOError as e:

print e

#Cisco - only pasword and enable

tel = Telnet(password_wait='assword: ', host='192.168.148.105',

port=23, passwd='xxxxx', prompt='>', timeout=5,

enable_string='enable', enable_wait='assword:', enable_prompt='#',

enable_passwd='xxxxxxx', init_command='term length 0', debuglevel=0)

tel.open()

ver = tel.run_command('show proc cpu | e 0.00')

for line in ver:

print line

#For module Cisco

def get_running_config(self):

"""Gets running-config from a Cisco router"""

try:

self.tnobj.write('sh run\n')

running_cfg = self.tnobj.read_until(self.prompt, self.timeout)

#self.tnobj.write('exit \n')

#self.tnobj.close()

except Exception as e:

raise Exception('telnet.get_running_config error: ' + str(e))

else:

return running_cfg.split('\n')

#TL1

try:

tel = Telnet(host='10.2.52.152', port=3083, timeout=5, debuglevel=0, prompt=';')

tel.open()

tel.run_command('ACT-USER::administrator:22222::xxxxxxx;')

#tel.set_debuglevel(100)

ver = tel.run_command('RD-EU::DSLS0001719:222222;')

for line in ver:

print line

except Exception as e:

print 'Errorrrrrrrrrrrrrrr: ' + str(e)