diff --git a/src/helpers/rp2040/WaveshareBoard.cpp b/variants/waveshare_rp2040_lora/WaveshareBoard.cpp
similarity index 100%
rename from src/helpers/rp2040/WaveshareBoard.cpp
rename to variants/waveshare_rp2040_lora/WaveshareBoard.cpp
diff --git a/src/helpers/rp2040/WaveshareBoard.h b/variants/waveshare_rp2040_lora/WaveshareBoard.h
similarity index 81%
rename from src/helpers/rp2040/WaveshareBoard.h
rename to variants/waveshare_rp2040_lora/WaveshareBoard.h
index c2b5aff52..694b8bd12 100644
--- a/src/helpers/rp2040/WaveshareBoard.h
+++ b/variants/waveshare_rp2040_lora/WaveshareBoard.h
@@ -6,18 +6,6 @@
 // LoRa radio module pins for Waveshare RP2040-LoRa-HF/LF
 // https://files.waveshare.com/wiki/RP2040-LoRa/Rp2040-lora-sch.pdf
 
-#define P_LORA_DIO_1             16
-#define P_LORA_NSS               13 // CS
-#define P_LORA_RESET             23
-#define P_LORA_BUSY              18
-#define P_LORA_SCLK              14
-#define P_LORA_MISO              24
-#define P_LORA_MOSI              15
-#define P_LORA_TX_LED            25
-
-#define SX126X_DIO2_AS_RF_SWITCH true
-#define SX126X_DIO3_TCXO_VOLTAGE 0
-
 /*
  * This board has no built-in way to read battery voltage.
  * Nevertheless it's very easy to make it work, you only require two 1% resistors.
diff --git a/variants/waveshare_rp2040_lora/platformio.ini b/variants/waveshare_rp2040_lora/platformio.ini
index 933c76615..e3c812b6f 100644
--- a/variants/waveshare_rp2040_lora/platformio.ini
+++ b/variants/waveshare_rp2040_lora/platformio.ini
@@ -3,28 +3,34 @@
 
 [waveshare_rp2040_lora]
 extends = rp2040_base
-
 board = pico
 board_build.filesystem_size = 0.5m
-
 build_flags = ${rp2040_base.build_flags}
   -I variants/waveshare_rp2040_lora
   -D SX126X_CURRENT_LIMIT=140
   -D RADIO_CLASS=CustomSX1262
   -D WRAPPER_CLASS=CustomSX1262Wrapper
-  -D LORA_TX_POWER=22
+  -D P_LORA_DIO_1=16
+  -D P_LORA_NSS=13 ; CS
+  -D P_LORA_RESET=23
+  -D P_LORA_BUSY=18
+  -D P_LORA_SCLK=14
+  -D P_LORA_MISO=24
+  -D P_LORA_MOSI=15
+  -D P_LORA_TX_LED=25
+  -D SX126X_DIO2_AS_RF_SWITCH=true
+  -D SX126X_DIO3_TCXO_VOLTAGE=0
   -D SX126X_RX_BOOSTED_GAIN=1
+  -D LORA_TX_POWER=22
 ; Debug options
   ; -D DEBUG_RP2040_WIRE=1
   ; -D DEBUG_RP2040_SPI=1
   ; -D DEBUG_RP2040_CORE=1
   ; -D RADIOLIB_DEBUG_SPI=1
   ; -D DEBUG_RP2040_PORT=Serial
-
 build_src_filter = ${rp2040_base.build_src_filter}
-  +<helpers/rp2040/WaveshareBoard.cpp>
+  +<WaveshareBoard.cpp>
   +<../variants/waveshare_rp2040_lora>
-
 lib_deps = ${rp2040_base.lib_deps}
 
 [env:waveshare_rp2040_lora_Repeater]
diff --git a/variants/waveshare_rp2040_lora/target.h b/variants/waveshare_rp2040_lora/target.h
index 149b9469f..aed558939 100644
--- a/variants/waveshare_rp2040_lora/target.h
+++ b/variants/waveshare_rp2040_lora/target.h
@@ -7,7 +7,7 @@
 #include <helpers/radiolib/CustomSX1262Wrapper.h>
 #include <helpers/radiolib/RadioLibWrappers.h>
 #include <helpers/SensorManager.h>
-#include <helpers/rp2040/WaveshareBoard.h>
+#include <WaveshareBoard.h>
 
 extern WaveshareBoard board;
 extern WRAPPER_CLASS radio_driver;