Permalink
4623434 Oct 4, 2018
2 contributors

Users who have contributed to this file

@Rotzbua @prazek
63 lines (56 sloc) 2.94 KB
/*
* --------------------------------------------------------------------------------------------------------------------
* Example sketch/program to test your firmware.
* --------------------------------------------------------------------------------------------------------------------
* This is a MFRC522 library example; for further details and other examples see: https://github.com/miguelbalboa/rfid
*
* This example test the firmware of your MFRC522 reader module, only known version can be checked. If the test passed
* it do not mean that your module is faultless! Some modules have bad or broken antennas or the PICC is broken.
* NOTE: for more informations read the README.rst
*
* @author Rotzbua
* @license Released into the public domain.
*
* Typical pin layout used:
* -----------------------------------------------------------------------------------------
* MFRC522 Arduino Arduino Arduino Arduino Arduino
* Reader/PCD Uno/101 Mega Nano v3 Leonardo/Micro Pro Micro
* Signal Pin Pin Pin Pin Pin Pin
* -----------------------------------------------------------------------------------------
* RST/Reset RST 9 5 D9 RESET/ICSP-5 RST
* SPI SS SDA(SS) 10 53 D10 10 10
* SPI MOSI MOSI 11 / ICSP-4 51 D11 ICSP-4 16
* SPI MISO MISO 12 / ICSP-1 50 D12 ICSP-1 14
* SPI SCK SCK 13 / ICSP-3 52 D13 ICSP-3 15
*/
#include <SPI.h>
#include <MFRC522.h>
#define RST_PIN 9 // Configurable, see typical pin layout above
#define SS_PIN 10 // Configurable, see typical pin layout above
MFRC522 mfrc522(SS_PIN, RST_PIN); // Create MFRC522 instance
/**
* Check firmware only once at startup
*/
void setup() {
Serial.begin(9600); // Initialize serial communications with the PC
while (!Serial); // Do nothing if no serial port is opened (added for Arduinos based on ATMEGA32U4)
SPI.begin(); // Init SPI bus
mfrc522.PCD_Init(); // Init MFRC522 module
Serial.println(F("*****************************"));
Serial.println(F("MFRC522 Digital self test"));
Serial.println(F("*****************************"));
mfrc522.PCD_DumpVersionToSerial(); // Show version of PCD - MFRC522 Card Reader
Serial.println(F("-----------------------------"));
Serial.println(F("Only known versions supported"));
Serial.println(F("-----------------------------"));
Serial.println(F("Performing test..."));
bool result = mfrc522.PCD_PerformSelfTest(); // perform the test
Serial.println(F("-----------------------------"));
Serial.print(F("Result: "));
if (result)
Serial.println(F("OK"));
else
Serial.println(F("DEFECT or UNKNOWN"));
Serial.println();
}
void loop() {} // nothing to do