No description, website, or topics provided.
Switch branches/tags
Nothing to show
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Type Name Latest commit message Commit time
Failed to load latest commit information.

Encrypted Dashboard based on docker

+ Nginx + Let's Encrypt + Rstudio + Shiny based on custom made debian full with different libraries and an R version with a lot of pre-installed libraries.


Up to date - please open an issue or commit new things


Add a docker to monitor the performance of the setup.
Add a postgres docker as an example of a connected database.

Basically I started with the code from these two repos: . .

What they did was to create a website running behind a dockerized Nginx reverse proxy and served via HTTPS using free Let's Encrypt certificates. New sites could be added on the fly by just modifying docker-compose.yml and then running docker-compose up as the main Nginx config is automatically updated and certificates (if needed) are automatically acquired.


I wanted to build an encrypted Shiny Dashboard with an Rstudio Server that would run in separate docker containers and be served at different urls.

The problem here is to share settings, code and libraries between the two docker containers. In order to do that I have done the following:

Debian image

I have created a custom debian image that basically installs all the libraries needed for linux to install R, Shiny and Rstudio along with a lot dependencies for different R packages. I did this to lay a common foundation for the R image and the following Shiny and Rstudio images. They need the same infrastructure to work properly. You can inspect the docker file in the debian folder and pull the image from:

R image

I built my own R image on top of the debian image. You can inspect the docker file in the r folder and pull the image from:

Rstudio and Shiny

Both Rstudio and Shiny are then built on top of the R image. This means that they all share the same dependencies and libraries. There shouldn't be any problem transferring R code from Rstudio to Shiny since the underlying R image is the same and they don't have different dependencies installed on the linux side.

You can inspect the Rstudio docker file in the rstudio folder and pull the image from:

You can inspect the Shiny docker file in the shiny folder and pull the image from:

Setup your dashboard


  • Clone the repository on the server pointed to by your domain.
  • In docker-compose.yml:
  • Choose if you want a single user setup or multiuser setup in Rstudio.
  • Change the VIRTUAL_HOST and LETSENCRYPT_HOST entries from and to your domains.
  • Change LETSENCRYPT_EMAIL entries to the email address you want to be associated with the certificates.
  • Change USER and PASSWORD entries to the user and password you want for Rstudio.


In the main directory run:

docker-compose up

This will perform the following steps:

  • Download the required images from Docker Hub (nginx, docker-gen, docker-letsencrypt-nginx-proxy-companion).
  • Create containers from them.
  • Build and create containers for Rstudio Server and Shiny Server
  • Start up the containers.
    • docker-letsencrypt-nginx-proxy-companion inspects containers' metadata and tries to acquire certificates as needed (if successful then saving them in a volume shared with the host and the Nginx container).
    • docker-gen also inspects containers' metadata and generates the configuration file for the main Nginx reverse proxy
  • Sets up a Watchtower docker - Watchtower is a process for watching your Docker containers and automatically updating and restarting them whenever their base image is refreshed.

If everything went well then you should now be able to access Rstudio and Shiny and the given addresses.


  • To view logs run docker-compose logs.
  • To view the generated Nginx configuration run docker exec -ti nginx cat /etc/nginx/conf.d/default.conf

How does it work

The system consists of 5 main parts:

  • Main Nginx reverse proxy container.
  • Container that generates the main Nginx config based on container metadata.
  • Container that automatically handles the acquisition and renewal of Let's Encrypt TLS certificates.
  • The actual servers living in their own containers. In this example Rstudio and Shiny.
  • A watchtower container to keep everythinng up-to-date.

The main Nginx reverse proxy container

This is the only publicly exposed container, routes traffic to the backend servers and provides TLS termination.

Uses the official nginx Docker image.

It is defined in docker-compose.yml under the nginx service block:

    restart: always
    image: nginx
    container_name: nginx
      - "80:80"
      - "443:443"
      - "/etc/nginx/conf.d"
      - "/etc/nginx/vhost.d"
      - "/usr/share/nginx/html"
      - "./volumes/proxy/certs:/etc/nginx/certs:ro"

As you can see it shares a few volumes:

  • Configuration folder: used by the container that generates the configuration file.
  • Default Nginx root folder: used by the Let's Encrypt container for challenges from the CA.
  • Certificates folder: written to by the Let's Encrypt container, this is where the TLS certificates are maintained.

The configuration generator container

This container inspects the other running containers and based on their metadata (like VIRTUAL_HOST environment variable) and a template file it generates the Nginx configuration file for the main Nginx container. When a new container is spinning up this container detects that, generates the appropriate configuration entries and restarts Nginx.

Uses the jwilder/docker-gen Docker image.

It is defined in docker-compose.yml under the nginx-gen service block:


    restart: always
    image: jwilder/docker-gen
    container_name: nginx-gen
      - "/var/run/docker.sock:/tmp/docker.sock:ro"
      - "./volumes/proxy/templates/nginx.tmpl:/etc/docker-gen/templates/nginx.tmpl:ro"
      - nginx
    entrypoint: /usr/local/bin/docker-gen -notify-sighup nginx -watch -wait 5s:30s /etc/docker-gen/templates/nginx.tmpl /etc/nginx/conf.d/default.conf

The container reads the nginx.tmpl template file (source: jwilder/nginx-proxy) via a volume shared with the host.

It also mounts the Docker socket into the container in order to be able to inspect the other containers (the "/var/run/docker.sock:/tmp/docker.sock:ro" line). Security warning: mounting the Docker socket is usually discouraged because the container getting (even read-only) access to it can get root access to the host. In our case, this container is not exposed to the world so if you trust the code running inside it the risks are probably fairly low. But definitely something to take into account. See e.g. The Dangers of Docker.sock for further details.

NOTE: it would be preferable to have docker-gen only handle containers with exposed ports (via -only-exposed flag in the entrypoint script above) but currently that does not work, see e.g.

The Let's Encrypt container

This container also inspects the other containers and acquires Let's Encrypt TLS certificates based on the LETSENCRYPT_HOST and LETSENCRYPT_EMAIL environment variables. At regular intervals it checks and renews certificates as needed.

Uses the jrcs/letsencrypt-nginx-proxy-companion Docker image.

It is defined in docker-compose.yml under the letsencrypt-nginx-proxy-companion service block:


    restart: always
    image: jrcs/letsencrypt-nginx-proxy-companion
    container_name: letsencrypt-nginx-proxy-companion
      - nginx
      - "/var/run/docker.sock:/var/run/docker.sock:ro"
      - "./volumes/proxy/certs:/etc/nginx/certs:rw"

The container uses a volume shared with the host and the Nginx container to maintain the certificates.

It also mounts the Docker socket in order to inspect the other containers. See the security warning above in the docker-gen section about the risks of that.

The Rstudio Server and Shiny Server

This example shows the single user case. These two servers are running in their own respective containers. They are defined in docker-compose.yml under the tidyverse and shiny service blocks:


    restart: always
    image: mikkelkrogsholm/rstudio
    container_name: rstudio
      - "8787"
      - VIRTUAL_NETWORK=nginx-proxy
      - VIRTUAL_PORT=80
      - USER=test
      - PASSWORD=test
      - shiny-apps:/home/mikkel/apps
      - r-packages:/usr/local/lib/R/site-library

    restart: always
    image: mikkelkrogsholm/shiny
    container_name: shiny
      - "3838"
      - VIRTUAL_NETWORK=nginx-proxy
      - VIRTUAL_PORT=80
      - shiny-apps:/srv/shiny-server/
      - ./volumes/shiny/logs:/var/log/
      - r-packages:/usr/local/lib/R/site-library

The important part here are the environment variables and the volumes. The environment variables are used by the config generator and certificate maintainer containers to set up the system.

The Watchtower container

The Watchtower service will look for new images every midnight and update and restart the other docker containers if they update. You can change the update schedule under schedule. It also removes the old containers.


    image: v2tec/watchtower
      - /var/run/docker.sock:/var/run/docker.sock
      - /root/.docker/config.json:/config.json
      --schedule "0 0 0 *" # Look for new images every midnight
      --cleanup # Removes old images

The data volumes

The volumes are used to ensure that Rstudio and Shiny share apps and packages in order for you to build apps in Rstudio and have them deployed on the Shiny server without too big a hassle.

  shiny-apps: # holds the shiny apps
  r-packages: # holds new common libraries
  backup: # makes backup of the /home folder in Rstudio docker.


This can be a fairly simple way to have easy, reproducible deploys for a secure R-based dashboard solution with auto-renewing TLS certificates.