Skip to content
Permalink
Browse files

Various documentation fixes in settingtypes.txt (#9910)

Fix incorrect value of 'mgv7_floatland_density'.
Use correct spelling of 'persistence'.
Move '3d_paralax_strength' into correct section (3D mode).
Refer to 'active_object_send_range_blocks' instead of non-existent 'active_object_range'.
  • Loading branch information
paramat committed May 22, 2020
1 parent 82e4137 commit 1bcdc2d7e9d91f21cd9be2836b777c5088313fa8
Showing with 7 additions and 7 deletions.
  1. +7 −7 builtin/settingtypes.txt
@@ -42,10 +42,10 @@
# Flags are always separated by comma without spaces.
# - default possible_flags
# * noise_params_2d:
# Format is <offset>, <scale>, (<spreadX>, <spreadY>, <spreadZ>), <seed>, <octaves>, <persistance>, <lacunarity>[, <default flags>]
# Format is <offset>, <scale>, (<spreadX>, <spreadY>, <spreadZ>), <seed>, <octaves>, <persistence>, <lacunarity>[, <default flags>]
# - default
# * noise_params_3d:
# Format is <offset>, <scale>, (<spreadX>, <spreadY>, <spreadZ>), <seed>, <octaves>, <persistance>, <lacunarity>[, <default flags>]
# Format is <offset>, <scale>, (<spreadX>, <spreadY>, <spreadZ>), <seed>, <octaves>, <persistence>, <lacunarity>[, <default flags>]
# - default
# * v3f:
# Format is (<X>, <Y>, <Z>)
@@ -561,9 +561,6 @@ enable_parallax_occlusion (Parallax occlusion) bool false
# 1 = relief mapping (slower, more accurate).
parallax_occlusion_mode (Parallax occlusion mode) int 1 0 1

# Strength of parallax.
3d_paralax_strength (Parallax occlusion strength) float 0.025

# Number of parallax occlusion iterations.
parallax_occlusion_iterations (Parallax occlusion iterations) int 4

@@ -713,6 +710,9 @@ fall_bobbing_amount (Fall bobbing factor) float 0.03
# Note that the interlaced mode requires shaders to be enabled.
3d_mode (3D mode) enum none none,anaglyph,interlaced,topbottom,sidebyside,crossview,pageflip

# Strength of 3D mode parallax.
3d_paralax_strength (3D mode parallax strength) float 0.025

# In-game chat console height, between 0.1 (10%) and 1.0 (100%).
console_height (Console height) float 0.6 0.1 1.0

@@ -1160,7 +1160,7 @@ active_object_send_range_blocks (Active object send range) int 4
# active block stuff, stated in mapblocks (16 nodes).
# In active blocks objects are loaded and ABMs run.
# This is also the minimum range in which active objects (mobs) are maintained.
# This should be configured together with active_object_range.
# This should be configured together with active_object_send_range_blocks.
active_block_range (Active block range) int 3

# From how far blocks are sent to clients, stated in mapblocks (16 nodes).
@@ -1640,7 +1640,7 @@ mgv7_float_taper_exp (Floatland taper exponent) float 2.0
# Value = 0.0: 50% of volume is floatland.
# Value = 2.0 (can be higher depending on 'mgv7_np_floatland', always test
# to be sure) creates a solid floatland layer.
mgv7_floatland_density (Floatland density) float -0.9
mgv7_floatland_density (Floatland density) float -0.6

# Surface level of optional water placed on a solid floatland layer.
# Water is disabled by default and will only be placed if this value is set

0 comments on commit 1bcdc2d

Please sign in to comment.
You can’t perform that action at this time.