TR-808 Start/Stop and Tap 3D buttons and Cherry MX switch adapter board
Switch branches/tags
Nothing to show
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Failed to load latest commit information.
Gerbers
README.md
TR808-Start-Stop.stl
TR808-Start-Stop.stp
TR808-Tap-Tempo.stl
TR808-Tap-Tempo.stp

README.md

ROLAND TR-808 START/STOP + TAP TEMPO REPLACEMENT SWITCHES

Use these files to fabricate the parts needed to replace the TR-808 Start/Stop and Tap switches with modern Cherry MX switches. The clear plastic shell with the paper label snaps onto the 3D printed caps and the fit should be tight enough to be held on by friction alone.

/Gerbers contains the Gerber files to fabricate the PCB adapter. .stp and/or .stl are for 3D printing the caps that will fit the Cherry MX plunger.

Further details can be found here: http://polysynth.tumblr.com/post/138225329605/roland-tr-808-tap-tempo-switch-replacement

Acknowledgements

The idea to use Cherry MX switches with 3D printed switch caps comes directly from Robin Whittle's 808 page: http://www.firstpr.com.au/rwi/tr-808/TR-808-switches/#SSTap

LICENSE

cc-by-sa-3.0 https://creativecommons.org/licenses/by-sa/3.0/