Skip to content

/ mist-firmware

Permalink
master
Switch branches/tags

mist-firmware/user_io.c

Go to file
 
 
Cannot retrieve contributors at this time
2486 lines (2117 sloc) 63.3 KB
Raw Blame
#include "AT91SAM7S256.h"
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include "hardware.h"
#include "osd.h"
#include "state.h"
#include "state.h"
#include "user_io.h"
#include "data_io.h"
#include "archie.h"
#include "pcecd.h"
#include "cdc_control.h"
#include "usb.h"
#include "debug.h"
#include "keycodes.h"
#include "ikbd.h"
#include "idxfile.h"
#include "spi.h"
#include "mist_cfg.h"
#include "mmc.h"
#include "tos.h"
#include "errors.h"
#include "arc_file.h"
#include "cue_parser.h"
#include "utils.h"
#include "usb/joymapping.h"
// up to 16 key can be remapped
#define MAX_REMAP 16
unsigned char key_remap_table[MAX_REMAP][2];
#define BREAK 0x8000
static char umounted; // 1st image is file or direct SD?
static char cue_valid = 0;
static char buffer[512];
static uint8_t buffer_drive_index = 0;
static uint32_t buffer_lba = 0xffffffff;
extern char s[FF_LFN_BUF + 1];
// mouse and keyboard emulation state
typedef enum { EMU_NONE, EMU_MOUSE, EMU_JOY0, EMU_JOY1 } emu_mode_t;
static emu_mode_t emu_mode = EMU_NONE;
static unsigned char emu_state = 0;
static unsigned long emu_timer = 0;
#define EMU_MOUSE_FREQ 5
// keep state over core type and its capabilities
static unsigned char core_type = CORE_TYPE_UNKNOWN;
static char core_type_8bit_with_config_string = 0;
// core supports direct ROM upload via SS4
extern char rom_direct_upload;
// core variant (mostly for arcades)
static char core_mod = 0;
// permanent state of adc inputs used for dip switches
static unsigned char adc_state = 0;
AT91PS_ADC a_pADC = AT91C_BASE_ADC;
AT91PS_PMC a_pPMC = AT91C_BASE_PMC;
// keep state of caps lock
static char caps_lock_toggle = 0;
// avoid multiple keyboard/controllers to interfere
static uint8_t latest_keyb_priority = 0; // keyboard=0, joypad with key mappings=1
// mouse position storage for ps2 and minimig rate limitation
#define X 0
#define Y 1
#define Z 2
#define MOUSE_FREQ 20 // 20 ms -> 50hz
static int16_t mouse_pos[2][3] = { {0, 0, 0}, {0, 0, 0} };
static uint8_t mouse_flags[2] = { 0, 0 };
static unsigned long mouse_timer;
#define LED_FREQ 100 // 100 ms
static unsigned long led_timer;
char keyboard_leds = 0;
bool caps_status = 0;
bool num_status = 0;
bool scrl_status = 0;
#define RTC_FREQ 1000 // 1 s
static unsigned long rtc_timer;
#define VIDEO_KEEP_VALUE 0x87654321
#define video_keep (*(int*)0x0020FF10)
#define video_altered (*(uint8_t*)0x0020FF14)
#define video_sd_disable (*(uint8_t*)0x0020FF15)
#define video_ypbpr (*(uint8_t*)0x0020FF16)
static unsigned char modifier = 0, pressed[6] = { 0,0,0,0,0,0 };
static unsigned char ps2_typematic_rate = 0x80;
static unsigned long ps2_typematic_timer;
typedef enum { PS2_KBD_IDLE, PS2_KBD_SCAN_GETSET, PS2_KBD_TYPEMATIC_SET, PS2_KBD_LED_SET } ps2_kbd_state_t;
static ps2_kbd_state_t ps2_kbd_state;
static char ps2_kbd_scan_set = 2;
typedef enum { PS2_MOUSE_IDLE, PS2_MOUSE_SETRESOLUTION, PS2_MOUSE_SETSAMPLERATE } ps2_mouse_state_t;
static ps2_mouse_state_t ps2_mouse_state;
static unsigned char ps2_mouse_status;
static unsigned char ps2_mouse_resolution;
static unsigned char ps2_mouse_samplerate;
// set by OSD code to suppress forwarding of those keys to the core which
// may be in use by an active OSD
static char osd_is_visible = false;
char user_io_osd_is_visible() {
return osd_is_visible;
}
static void PollOneAdc() {
static unsigned char adc_cnt = 0xff;
// fetch result from previous run
if(adc_cnt != 0xff) {
unsigned int result;
// wait for end of convertion
while(!(AT91C_BASE_ADC->ADC_SR & (1 << (4+adc_cnt))));
switch (adc_cnt) {
case 0: result = AT91C_BASE_ADC->ADC_CDR4; break;
case 1: result = AT91C_BASE_ADC->ADC_CDR5; break;
case 2: result = AT91C_BASE_ADC->ADC_CDR6; break;
case 3: result = AT91C_BASE_ADC->ADC_CDR7; break;
}
if(result < 128) adc_state |= (1<<adc_cnt);
if(result > 128) adc_state &= ~(1<<adc_cnt);
}
adc_cnt = (adc_cnt + 1)&3;
// Enable desired chanel
AT91C_BASE_ADC->ADC_CHER = 1 << (4+adc_cnt);
// Start conversion
AT91C_BASE_ADC->ADC_CR = AT91C_ADC_START;
}
static void InitADC(void) {
// Enable clock for interface
AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_ADC;
// Reset
AT91C_BASE_ADC->ADC_CR = AT91C_ADC_SWRST;
AT91C_BASE_ADC->ADC_CR = 0x0;
// Set maximum startup time and hold time
AT91C_BASE_ADC->ADC_MR = 0x0F1F0F00 | AT91C_ADC_LOWRES_8_BIT;
// make sure we get the first values immediately
PollOneAdc();
PollOneAdc();
PollOneAdc();
PollOneAdc();
}
// poll one adc channel every 25ms
static void PollAdc() {
static long adc_timer = 0;
if(CheckTimer(adc_timer)) {
adc_timer = GetTimer(25);
PollOneAdc();
}
}
void user_io_reset() {
// no sd card image selected, SD card accesses will go directly
// to the card (first slot, and only until the first unmount)
umounted = 0;
cue_valid = 0;
sd_image[0].valid = 0;
sd_image[1].valid = 0;
sd_image[2].valid = 0;
sd_image[3].valid = 0;
core_mod = 0;
ps2_kbd_state = PS2_KBD_IDLE;
ps2_kbd_scan_set = 2;
ps2_mouse_state = PS2_MOUSE_IDLE;
ps2_mouse_status = 0;
ps2_mouse_resolution = 0;
ps2_mouse_samplerate = 0;
ps2_typematic_rate = 0x80;
}
void user_io_init() {
user_io_reset();
if(video_keep != VIDEO_KEEP_VALUE) video_altered = 0;
video_keep = 0;
// mark remap table as unused
memset(key_remap_table, 0, sizeof(key_remap_table));
InitADC();
if(user_io_menu_button()) DEBUG_MODE_VAR = DEBUG_MODE ? 0 : DEBUG_MODE_VALUE;
iprintf("debug_mode = %d\n", DEBUG_MODE);
ikbd_init();
}
unsigned char user_io_core_type() {
return core_type;
}
char minimig_v1() {
return(core_type == CORE_TYPE_MINIMIG);
}
char minimig_v2() {
return(core_type == CORE_TYPE_MINIMIG2);
}
char user_io_create_config_name(char *s, const char *ext, char flags) {
char *p = 0;
if (flags & CONFIG_VHD) p = arc_get_vhdname();
if (!p || !*p) p = user_io_get_core_name();
if(p[0]) {
if (flags & CONFIG_ROOT) strcpy(s,"/"); else s[0] = 0;
strcat(s, p);
if (ext) {
strcat(s,".");
strcat(s,ext);
}
return 0;
}
return 1;
}
char user_io_is_8bit_with_config_string() {
return core_type_8bit_with_config_string;
}
static char core_name[16+1]; // max 16 bytes for core name
char *user_io_get_core_name() {
char *arc_core_name = arc_get_corename();
return *arc_core_name ? arc_core_name : core_name;
}
static void user_io_read_core_name() {
core_name[0] = 0;
if(user_io_is_8bit_with_config_string()) {
char *p = user_io_8bit_get_string(0); // get core name
if(p && p[0]) strcpy(core_name, p);
}
iprintf("Core name from FPGA is \"%s\"\n", core_name);
}
void user_io_set_core_mod(char mod) {
core_mod = mod;
}
static void user_io_send_core_mod() {
iprintf("Sending core mod = %d\n", core_mod);
spi_uio_cmd8(UIO_SET_MOD, core_mod);
}
void user_io_send_rtc(void) {
uint8_t date[7]; //year,month,date,hour,min,sec,day
uint8_t i;
if (usb_rtc_get_time((uint8_t*)&date)) {
//iprintf("Sending time of day %u:%02u:%02u %u.%u.%u\n",
// date[3], date[4], date[5], date[2], date[1], 1900 + date[0]);
spi_uio_cmd_cont(UIO_SET_RTC);
spi8(bin2bcd(date[5])); // sec
spi8(bin2bcd(date[4])); // min
spi8(bin2bcd(date[3])); // hour
spi8(bin2bcd(date[2])); // date
spi8(bin2bcd(date[1])); // month
spi8(bin2bcd(date[0]-100)); // year
spi8(bin2bcd(date[6])-1); //day 1-7 -> 0-6
spi8(0x40); // flag
DisableIO();
}
}
void user_io_detect_core_type() {
core_name[0] = 0;
EnableIO();
core_type = SPI(0xff);
DisableIO();
rom_direct_upload = (core_type & 0x10) >> 4; // bit 4 - direct upload support
core_type &= 0xef;
if((core_type != CORE_TYPE_DUMB) &&
(core_type != CORE_TYPE_MINIMIG) &&
(core_type != CORE_TYPE_MINIMIG2) &&
(core_type != CORE_TYPE_PACE) &&
(core_type != CORE_TYPE_MIST) &&
(core_type != CORE_TYPE_MIST2) &&
(core_type != CORE_TYPE_ARCHIE) &&
(core_type != CORE_TYPE_8BIT))
core_type = CORE_TYPE_UNKNOWN;
switch(core_type) {
case CORE_TYPE_UNKNOWN:
iprintf("Unable to identify core (%x)!\n", core_type);
break;
case CORE_TYPE_DUMB:
puts("Identified core without user interface");
break;
case CORE_TYPE_MINIMIG:
strcpy(core_name, "MINIMIG");
puts("Identified Minimig V1 core");
break;
case CORE_TYPE_MINIMIG2:
strcpy(core_name, "MINIMIG");
puts("Identified Minimig V2 core");
break;
case CORE_TYPE_PACE:
puts("Identified PACE core");
break;
case CORE_TYPE_MIST:
case CORE_TYPE_MIST2:
strcpy(core_name, "ST");
puts("Identified MiST core");
break;
case CORE_TYPE_ARCHIE:
puts("Identified Archimedes core");
strcpy(core_name, "ARCHIE");
archie_init();
break;
case CORE_TYPE_8BIT: {
puts("Identified 8BIT core");
// send core variant first to allow the FPGA choosing the config string
user_io_send_core_mod();
// forward SD card config to core in case it uses the local
// SD card implementation
user_io_sd_set_config();
// check if core has a config string
core_type_8bit_with_config_string = (user_io_8bit_get_string(0) != NULL);
// set core name. This currently only sets a name for the 8 bit cores
user_io_read_core_name();
// send a reset
user_io_8bit_set_status(UIO_STATUS_RESET, ~0);
FIL file;
UINT br;
// try to load config
if(!user_io_create_config_name(s, "CFG", CONFIG_ROOT)) {
iprintf("Loading config %s\n", s);
if (f_open(&file, s, FA_READ) == FR_OK) {
iprintf("Found config\n");
if(f_size(&file) <= 8) {
((unsigned long long*)sector_buffer)[0] = 0;
f_read(&file, sector_buffer, f_size(&file), &br);
user_io_8bit_set_status(((unsigned long long*)sector_buffer)[0], ~1);
}
f_close(&file);
} else {
user_io_8bit_set_status(arc_get_default(), ~1);
}
}
for (char root = 0; root <= 1; root++) {
// check if there's a <core>.rom present, send it via index 0
if (!user_io_create_config_name(s, "ROM", root)) {
iprintf("Looking for %s\n", s);
if (f_open(&file, s, FA_READ) == FR_OK) {
data_io_file_tx(&file, 0, "ROM");
f_close(&file);
break;
}
}
}
if(!user_io_create_config_name(s, "RAM", CONFIG_ROOT)) {
iprintf("Looking for %s\n", s);
// check if there's a <core>.ram present, send it via index -1
if (f_open(&file, s, FA_READ) == FR_OK) {
data_io_file_tx(&file, -1, "RAM");
f_close(&file);
}
}
// check if there's a <core>.vhd present
if(!user_io_create_config_name(s, "VHD", CONFIG_ROOT | CONFIG_VHD)) {
iprintf("Looking for %s\n", s);
user_io_file_mount(s, 0);
if (!user_io_is_mounted(0)) {
// check for <core>.HD0/1 files
if(!user_io_create_config_name(s, "HD0", CONFIG_ROOT | CONFIG_VHD)) {
for (int i = 0; i < SD_IMAGES; i++) {
s[strlen(s)-1] = '0'+i;
iprintf("Looking for %s\n", s);
user_io_file_mount(s, i);
}
}
}
}
// release reset
user_io_8bit_set_status(0, UIO_STATUS_RESET);
} break;
}
}
static unsigned short usb2amiga( unsigned char k ) {
// replace MENU key by RGUI to allow using Right Amiga on reduced keyboards
// (it also disables the use of Menu for OSD)
if (mist_cfg.key_menu_as_rgui && k==0x65) {
return 0x67;
}
return usb2ami[k];
}
static unsigned short usb2ps2code( unsigned char k) {
// replace MENU key by RGUI e.g. to allow using RGUI on reduced keyboards without physical key
// (it also disables the use of Menu for OSD)
if (mist_cfg.key_menu_as_rgui && k==0x65) {
return EXT | 0x27;
}
return (ps2_kbd_scan_set == 1) ? usb2ps2_set1[k] : usb2ps2[k];
}
void user_io_analog_joystick(unsigned char joystick, char valueX, char valueY) {
if(core_type == CORE_TYPE_8BIT) {
spi_uio_cmd8_cont(UIO_ASTICK, joystick);
spi8(valueX);
spi8(valueY);
DisableIO();
}
}
void user_io_digital_joystick(unsigned char joystick, unsigned char map) {
uint8_t state = map;
// "only" 6 joysticks are supported
if(joystick > 5)
return;
// if osd is open, control it via joystick
if(osd_is_visible)
return;
//iprintf("j%d: %x\n", joystick, map);
// atari ST handles joystick 0 and 1 through the ikbd emulated by the io controller
// but only for joystick 1 and 2
if((core_type == CORE_TYPE_MIST) && (joystick < 2)) {
ikbd_joystick(joystick, map);
return;
}
// every other core else uses this
// (even MIST, joystick 3 and 4 were introduced later)
spi_uio_cmd8((joystick < 2)?(UIO_JOYSTICK0 + joystick):((UIO_JOYSTICK2 + joystick - 2)), map);
}
void user_io_digital_joystick_ext(unsigned char joystick, uint16_t map) {
// "only" 6 joysticks are supported
if(joystick > 5) return;
//iprintf("ext j%d: %x\n", joystick, map);
spi_uio_cmd32(UIO_JOYSTICK0_EXT + joystick, 0x0000ffff & map);
}
static char dig2ana(char min, char max) {
if(min && !max) return -128;
if(max && !min) return 127;
return 0;
}
void user_io_joystick(unsigned char joystick, unsigned char map) {
// digital joysticks also send analog signals
user_io_digital_joystick(joystick, map);
user_io_digital_joystick_ext(joystick, map);
user_io_analog_joystick(joystick,
dig2ana(map&JOY_LEFT, map&JOY_RIGHT),
dig2ana(map&JOY_UP, map&JOY_DOWN));
}
// transmit serial/rs232 data into core
void user_io_serial_tx(char *chr, uint16_t cnt) {
if (core_type == CORE_TYPE_MIST)
spi_uio_cmd_cont(UIO_SERIAL_OUT);
else
spi_uio_cmd_cont(UIO_SIO_OUT);
while(cnt--) spi8(*chr++);
DisableIO();
}
char user_io_serial_status(serial_status_t *status_in, uint8_t status_out) {
uint8_t i, *p = (uint8_t*)status_in;
spi_uio_cmd_cont(UIO_SERIAL_STAT);
// first byte returned by core must be "magic". otherwise the
// core doesn't support this request
if(SPI(status_out) != 0xa5) {
DisableIO();
return 0;
}
// read the whole structure
for(i=0;i<sizeof(serial_status_t);i++)
*p++ = spi_in();
DisableIO();
return 1;
}
// transmit midi data into core
void user_io_midi_tx(char chr) {
spi_uio_cmd8(UIO_MIDI_OUT, chr);
}
// send ethernet mac address into FPGA
void user_io_eth_send_mac(uint8_t *mac) {
uint8_t i;
spi_uio_cmd_cont(UIO_ETH_MAC);
for(i=0;i<6;i++) spi8(*mac++);
DisableIO();
}
// set SD card info in FPGA (CSD, CID)
void user_io_sd_set_config(void) {
unsigned char data[33];
// get CSD and CID from SD card
MMC_GetCID(data);
MMC_GetCSD(data+16);
// byte 32 is a generic config byte
data[32] = MMC_IsSDHC()?1:0;
// and forward it to the FPGA
spi_uio_cmd_cont(UIO_SET_SDCONF);
spi_write(data, sizeof(data));
DisableIO();
// hexdump(data, sizeof(data), 0);
}
// read 8+32 bit sd card status word from FPGA
uint8_t user_io_sd_get_status(uint32_t *lba, uint8_t *drive_index) {
uint32_t s;
uint8_t c;
*drive_index = 0;
spi_uio_cmd_cont(UIO_GET_SDSTAT);
c = spi_in();
if ((c & 0xf0) == 0x60) *drive_index = spi_in() & 0x03;
s = spi_in();
s = (s<<8) | spi_in();
s = (s<<8) | spi_in();
s = (s<<8) | spi_in();
DisableIO();
if(lba) *lba = s;
return c;
}
// read 8 bit keyboard LEDs status from FPGA
static uint8_t user_io_kbdled_get_status(void) {
uint8_t c;
spi_uio_cmd_cont(UIO_GET_KBD_LED);
c = spi_in();
DisableIO();
return c;
}
// read 32 bit ethernet status word from FPGA
uint32_t user_io_eth_get_status(void) {
uint32_t s;
spi_uio_cmd_cont(UIO_ETH_STATUS);
s = spi_in();
s = (s<<8) | spi_in();
s = (s<<8) | spi_in();
s = (s<<8) | spi_in();
DisableIO();
return s;
}
// read ethernet frame from FPGAs ethernet tx buffer
void user_io_eth_receive_tx_frame(uint8_t *d, uint16_t len) {
spi_uio_cmd_cont(UIO_ETH_FRM_IN);
while(len--) *d++=spi_in();
DisableIO();
}
// write ethernet frame to FPGAs rx buffer
void user_io_eth_send_rx_frame(uint8_t *s, uint16_t len) {
spi_uio_cmd_cont(UIO_ETH_FRM_OUT);
spi_write(s, len);
spi8(0); // one additional byte to allow fpga to store the previous one
DisableIO();
}
// the physical joysticks (db9 ports at the right device side)
// as well as the joystick emulation are renumbered if usb joysticks
// are present in the system. The USB joystick(s) replace joystick 1
// and 0 and the physical joysticks are "shifted up".
//
// Since the primary joystick is in port 1 the first usb joystick
// becomes joystick 1 and only the second one becomes joystick 0
// (mouse port)
static uint8_t joystick_renumber(uint8_t j) {
uint8_t usb_sticks = hid_get_joysticks();
// no usb sticks present: no changes are being made
if(!usb_sticks) return j;
// Keep DB9 joysticks as joystick 0 and joystick 1
// USB joysticks will be 2,3,...
if(mist_cfg.joystick_db9_fixed_index) return j;
if(j == 0) {
// if usb joysticks are present, then physical joystick 0 (mouse port)
// becomes becomes 2,3,...
j = mist_cfg.joystick0_prefer_db9 ? 0 : usb_sticks + 1;
} else {
// if one usb joystick is present, then physical joystick 1 (joystick port)
// becomes physical joystick 0 (mouse) port. If more than 1 usb joystick
// is present it becomes 2,3,...
if(usb_sticks == 1) j = 0;
else j = usb_sticks;
}
return j;
}
static void user_io_joystick_emu() {
// iprintf("joystick_emu_fixed_index: %d\n", mist_cfg.joystick_emu_fixed_index);
// joystick emulation also follows renumbering if requested (default)
if(emu_mode == EMU_JOY0) user_io_joystick(mist_cfg.joystick_emu_fixed_index ? 0 : joystick_renumber(0), emu_state);
if(emu_mode == EMU_JOY1) user_io_joystick(mist_cfg.joystick_emu_fixed_index ? 1 : joystick_renumber(1), emu_state);
}
// 16 byte fifo for amiga key codes to limit max key rate sent into the core
#define KBD_FIFO_SIZE 16 // must be power of 2
static unsigned short kbd_fifo[KBD_FIFO_SIZE];
static unsigned char kbd_fifo_r=0, kbd_fifo_w=0;
static long kbd_timer = 0;
static void kbd_fifo_minimig_send(unsigned short code) {
spi_uio_cmd8((code&OSD)?UIO_KBD_OSD:UIO_KEYBOARD, code & 0xff);
kbd_timer = GetTimer(10); // next key after 10ms earliest
}
static void kbd_fifo_enqueue(unsigned short code) {
// if fifo full just drop the value. This should never happen
if(((kbd_fifo_w+1)&(KBD_FIFO_SIZE-1)) == kbd_fifo_r)
return;
// store in queue
kbd_fifo[kbd_fifo_w] = code;
kbd_fifo_w = (kbd_fifo_w + 1)&(KBD_FIFO_SIZE-1);
}
// send pending bytes if timer has run up
static void kbd_fifo_poll() {
// timer enabled and runnig?
if(kbd_timer && !CheckTimer(kbd_timer))
return;
kbd_timer = 0; // timer == 0 means timer is not running anymore
if(kbd_fifo_w == kbd_fifo_r)
return;
kbd_fifo_minimig_send(kbd_fifo[kbd_fifo_r]);
kbd_fifo_r = (kbd_fifo_r + 1)&(KBD_FIFO_SIZE-1);
}
char user_io_is_cue_mounted() {
return cue_valid;
}
char user_io_cue_mount(const unsigned char *name) {
char res = CUE_RES_OK;
cue_valid = 0;
if (name) {
res = cue_parse(name, &sd_image[3]);
if (res == CUE_RES_OK) cue_valid = 1;
}
// send mounted image size first then notify about mounting
EnableIO();
SPI(UIO_SET_SDINFO);
// use LE version, so following BYTE(s) may be used for size extension in the future.
spi32le(cue_valid ? f_size(&toc.file->file) : 0);
spi32le(cue_valid ? f_size(&toc.file->file) >> 32 : 0);
spi32le(0); // reserved for future expansion
spi32le(0); // reserved for future expansion
DisableIO();
// notify core of possible sd image change
spi_uio_cmd8(UIO_SET_SDSTAT, 1);
return res;
}
static inline char sd_index(unsigned char index) {
unsigned char retval = index;
if (core_type == CORE_TYPE_ARCHIE)
return (index + 2);
else
return index;
}
char user_io_is_mounted(unsigned char index) {
return sd_image[sd_index(index)].valid;
}
void user_io_file_mount(const unsigned char *name, unsigned char index) {
FRESULT res;
buffer_lba = 0xffffffff; // invalidate cache
if (name) {
if (sd_image[sd_index(index)].valid)
f_close(&sd_image[sd_index(index)].file);
res = IDXOpen(&sd_image[sd_index(index)], name, FA_READ | FA_WRITE);
if (res != FR_OK) res = IDXOpen(&sd_image[sd_index(index)], name, FA_READ);
if (res == FR_OK) {
iprintf("selected %llu bytes to slot %d\n", f_size(&sd_image[sd_index(index)].file), index);
sd_image[sd_index(index)].valid = 1;
// build index for fast random access
IDXIndex(&sd_image[sd_index(index)]);
} else {
iprintf("error mounting %s (%d)\n", name, res);
return;
}
} else {
iprintf("unmounting file in slot %d\n", index);
if (sd_image[sd_index(index)].valid) f_close(&sd_image[sd_index(index)].file);
sd_image[sd_index(index)].valid = 0;
if (!index) umounted = 1;
}
// send mounted image size first then notify about mounting
EnableIO();
SPI(UIO_SET_SDINFO);
// use LE version, so following BYTE(s) may be used for size extension in the future.
spi32le(sd_image[sd_index(index)].valid ? f_size(&sd_image[sd_index(index)].file) : 0);
spi32le(sd_image[sd_index(index)].valid ? f_size(&sd_image[sd_index(index)].file) >> 32: 0);
spi32le(0); // reserved for future expansion
spi32le(0); // reserved for future expansion
DisableIO();
// notify core of possible sd image change
spi_uio_cmd8(UIO_SET_SDSTAT, index);
}
// 8 bit cores have a config string telling the firmware how
// to treat it
char *user_io_8bit_get_string(char index) {
unsigned char i, lidx = 0, j = 0, d = 0, arc = 0;
int arc_ptr = 0;
char dip[3];
static char buffer[128+1]; // max 128 bytes per config item
// clear buffer
buffer[0] = 0;
spi_uio_cmd_cont(UIO_GET_STRING);
i = spi_in();
// the first char returned will be 0xff if the core doesn't support
// config strings. atari 800 returns 0xa4 which is the status byte
if((i == 0xff) || (i == 0xa4)) {
DisableIO();
return NULL;
}
// iprintf("String: ");
while ((i != 0) && (i!=0xff) && (j<sizeof(buffer))) {
if(i == ';') {
if(!arc && d==3 && !strncmp(dip, "DIP", 3)) {
// found "DIP", continue with config snippet from ARC
if(lidx == index) {
// skip the DIP line
j = 0;
buffer[0] = 0;
}
arc = 1;
} else {
if(lidx == index) buffer[j++] = 0;
lidx++;
}
d = 0;
} else {
if(lidx == index)
buffer[j++] = i;
if (d<3)
dip[d++] = i;
}
//iprintf("%c", i);
if (arc) {
i = arc_get_conf()[arc_ptr++];
if (!i) arc = 0;
}
if (!arc)
i = spi_in();
}
DisableIO();
// iprintf("\n");
// if this was the last string in the config string list, then it still
// needs to be terminated
if(lidx == index)
buffer[j] = 0;
// also return NULL for empty strings
if(!buffer[0])
return NULL;
return buffer;
}
unsigned long long user_io_8bit_set_status(unsigned long long new_status, unsigned long long mask) {
static unsigned long long status = 0;
// if mask is 0 just return the current status
if(mask) {
// keep everything not masked
status &= ~mask;
// updated masked bits
status |= new_status & mask;
spi_uio_cmd8(UIO_SET_STATUS, status);
spi_uio_cmd64(UIO_SET_STATUS2, status);
}
return status;
}
char kbd_reset = 0;
void user_io_send_buttons(char force) {
static unsigned char key_map = 0;
// frequently poll the adc the switches
// and buttons are connected to
PollAdc();
unsigned char map = 0;
if(adc_state & 1) map |= SWITCH2;
if(adc_state & 2) map |= SWITCH1;
if(adc_state & 4) map |= BUTTON1;
else if(adc_state & 8) map |= BUTTON2;
if(kbd_reset) map |= BUTTON2;
if(!mist_cfg.keep_video_mode) video_altered = 0;
if(video_altered & 1)
{
if(video_sd_disable) map |= CONF_SCANDOUBLER_DISABLE;
}
else
{
if(mist_cfg.scandoubler_disable) map |= CONF_SCANDOUBLER_DISABLE;
}
if(video_altered & 2)
{
if(video_ypbpr) map |= CONF_YPBPR;
}
else
{
if(mist_cfg.ypbpr) map |= CONF_YPBPR;
}
if(mist_cfg.csync_disable) map |= CONF_CSYNC_DISABLE;
if(mist_cfg.sdram64) map |= CONF_SDRAM64;
if((map != key_map) || force) {
key_map = map;
spi_uio_cmd8(UIO_BUT_SW, map);
iprintf("sending keymap\n");
}
}
static void set_kbd_led(unsigned char led, bool on)
{
if(led & HID_LED_CAPS_LOCK)
{
if(!(keyboard_leds & KBD_LED_CAPS_CONTROL)) hid_set_kbd_led(led, on);
caps_status = on;
}
if(led & HID_LED_NUM_LOCK)
{
if(!(keyboard_leds & KBD_LED_NUM_CONTROL)) hid_set_kbd_led(led, on);
num_status = on;
}
if(led & HID_LED_SCROLL_LOCK)
{
if(!(keyboard_leds & KBD_LED_SCRL_CONTROL)) hid_set_kbd_led(led, on);
scrl_status = on;
}
}
static void handle_ps2_kbd_commands()
{
unsigned char c, cmd;
spi_uio_cmd_cont(UIO_KEYBOARD_IN);
c = spi_in();
cmd = spi_in();
DisableIO();
if (c == UIO_KEYBOARD_IN) { // receiving echo of the command code shows the core supports this message
iprintf("PS2 keyboard cmd: %02x\n", cmd);
switch (ps2_kbd_state) {
case PS2_KBD_IDLE:
switch (cmd) {
case 0xFF: // reset
ps2_kbd_scan_set = 2;
spi_uio_cmd8(UIO_KEYBOARD, 0xFA); // ACK
spi_uio_cmd8(UIO_KEYBOARD, 0xAA); // BAT successful
break;
case 0xF2: // read ID
spi_uio_cmd8(UIO_KEYBOARD, 0xFA); // ACK
spi_uio_cmd8(UIO_KEYBOARD, 0xAB); // ID1
spi_uio_cmd8(UIO_KEYBOARD, 0x83); // ID2
break;
case 0xF0: // scan get/set
spi_uio_cmd8(UIO_KEYBOARD, 0xFA); // ACK
ps2_kbd_state = PS2_KBD_SCAN_GETSET;
break;
case 0xF3: // typematic set
spi_uio_cmd8(UIO_KEYBOARD, 0xFA); // ACK
ps2_kbd_state = PS2_KBD_TYPEMATIC_SET;
break;
case 0xED: // set LEDs
spi_uio_cmd8(UIO_KEYBOARD, 0xFA); // ACK
ps2_kbd_state = PS2_KBD_LED_SET;
break;
case 0xEE: // echo
spi_uio_cmd8(UIO_KEYBOARD, 0xEE); // ACK
break;
case 0xF4: // enable scanning
// TODO: handle the message
spi_uio_cmd8(UIO_KEYBOARD, 0xFA); // ACK
break;
case 0xF5: // disable scanning
// TODO: handle the message
spi_uio_cmd8(UIO_KEYBOARD, 0xFA); // ACK
break;
case 0xF6: // set default parameters
ps2_kbd_scan_set = 2;
spi_uio_cmd8(UIO_KEYBOARD, 0xFA); // ACK
break;
}
break;
case PS2_KBD_SCAN_GETSET:
if (cmd<=3) {
spi_uio_cmd8(UIO_KEYBOARD, 0xFA); // ACK
if (!cmd) // get
spi_uio_cmd8(UIO_KEYBOARD, ps2_kbd_scan_set);
else // set
ps2_kbd_scan_set = cmd;
ps2_kbd_state = PS2_KBD_IDLE;
} else {
spi_uio_cmd8(UIO_KEYBOARD, 0xFE); // RESEND
}
break;
case PS2_KBD_TYPEMATIC_SET:
ps2_typematic_rate = cmd;
spi_uio_cmd8(UIO_KEYBOARD, 0xFA); // ACK
ps2_kbd_state = PS2_KBD_IDLE;
break;
case PS2_KBD_LED_SET:
// TODO: handle the message
spi_uio_cmd8(UIO_KEYBOARD, 0xFA); // ACK
ps2_kbd_state = PS2_KBD_IDLE;
break;
}
}
}
static void send_keycode(unsigned short code);
static unsigned short keycode(unsigned char in);
// 1000/(2^(39-rate)^(1/8))
static int ps2_typematic_rates[] =
{34, 37, 40, 44, 48, 52, 57, 62, 68, 74, 81, 88, 96, 105, 114, 125, 136,
148, 162, 176, 192, 210, 229, 250, 272, 297, 324, 353, 385, 420, 458, 500};
static void handle_ps2_typematic_repeat()
{
if (ps2_typematic_rate & 0x80) return;
if (ps2_kbd_state != PS2_KBD_IDLE) return;
if (CheckTimer(ps2_typematic_timer)) {
ps2_typematic_timer = GetTimer(ps2_typematic_rates[ps2_typematic_rate & 0x1f]);
for (char i=5; i>=0; i--) {
if (pressed[i]) {
unsigned short code = keycode(pressed[i]);
if (!osd_is_visible && !(code & CAPS_LOCK_TOGGLE)&& !(code & NUM_LOCK_TOGGLE)) {
send_keycode(code);
}
break;
}
}
}
}
static void handle_ps2_mouse_commands()
{
unsigned char c, cmd;
spi_uio_cmd_cont(UIO_MOUSE_IN);
c = spi_in();
cmd = spi_in();
DisableIO();
if (c == UIO_MOUSE_IN) { // receiving echo of the command code shows the core supports this message
iprintf("PS2 mouse cmd: %02x\n", cmd);
switch (ps2_mouse_state) {
case PS2_MOUSE_IDLE:
switch (cmd) {
case 0xFF: // reset
spi_uio_cmd8(UIO_MOUSE0_EXT, 0xFA); // ACK
spi_uio_cmd8(UIO_MOUSE0_EXT, 0xAA); // BAT successful
spi_uio_cmd8(UIO_MOUSE0_EXT, 0);
break;
case 0xF6: // set defaults;
spi_uio_cmd8(UIO_MOUSE0_EXT, 0xFA); // ACK
break;
case 0xE6: // set mouse scaling to 1:1
spi_uio_cmd8(UIO_MOUSE0_EXT, 0xFA); // ACK
ps2_mouse_status &= ~0x10;
break;
case 0xE7: // set mouse scaling to 1:2
spi_uio_cmd8(UIO_MOUSE0_EXT, 0xFA); // ACK
ps2_mouse_status |= 0x10;
break;
case 0xE8: // set resolution
spi_uio_cmd8(UIO_MOUSE0_EXT, 0xFA); // ACK
ps2_mouse_state = PS2_MOUSE_SETRESOLUTION;
break;
case 0xE9: // status request
spi_uio_cmd8(UIO_MOUSE0_EXT, 0xFA); // ACK
spi_uio_cmd8(UIO_MOUSE0_EXT, ps2_mouse_status);
spi_uio_cmd8(UIO_MOUSE0_EXT, ps2_mouse_resolution);
spi_uio_cmd8(UIO_MOUSE0_EXT, ps2_mouse_samplerate);
break;
case 0xF2: // get device ID
spi_uio_cmd8(UIO_MOUSE0_EXT, 0xFA); // ACK
spi_uio_cmd8(UIO_MOUSE0_EXT, 0x00); // Normal PS2 mouse
break;
case 0xF4: // enable data reporting
spi_uio_cmd8(UIO_MOUSE0_EXT, 0xFA); // ACK
ps2_mouse_status |= 0x20;
break;
case 0xF5: // disable data reporting
spi_uio_cmd8(UIO_MOUSE0_EXT, 0xFA); // ACK
ps2_mouse_status &= ~0x20;
break;
case 0xF3: // set sample rate
spi_uio_cmd8(UIO_MOUSE0_EXT, 0xFA); // ACK
ps2_mouse_state = PS2_MOUSE_SETSAMPLERATE;
break;
}
break;
case PS2_MOUSE_SETRESOLUTION:
spi_uio_cmd8(UIO_MOUSE0_EXT, 0xFA); // ACK
ps2_mouse_resolution = cmd;
ps2_mouse_state = PS2_MOUSE_IDLE;
break;
case PS2_MOUSE_SETSAMPLERATE:
spi_uio_cmd8(UIO_MOUSE0_EXT, 0xFA); // ACK
ps2_mouse_samplerate = cmd;
ps2_mouse_state = PS2_MOUSE_IDLE;
break;
}
}
}
void user_io_poll() {
// check of core has changed from a good one to a not supported on
// as this likely means that the user is reloading the core via jtag
unsigned char ct;
static unsigned char ct_cnt = 0;
EnableIO();
ct = SPI(0xff);
DisableIO();
SPI(0xff); // needed for old minimig core
if((ct&0xef) == core_type)
ct_cnt = 0; // same core type, everything is fine
else {
// core type has changed
if(++ct_cnt == 255) {
USB_LOAD_VAR = USB_LOAD_VALUE;
// wait for a new valid core id to appear
while((ct & 0xe0) != 0xa0) {
EnableIO();
ct = SPI(0xff);
DisableIO();
SPI(0xff); // needed for old minimig core
}
// reset io controller to cope with new core
MCUReset(); // restart
for(;;);
}
}
if((core_type != CORE_TYPE_MINIMIG) &&
(core_type != CORE_TYPE_MINIMIG2) &&
(core_type != CORE_TYPE_PACE) &&
(core_type != CORE_TYPE_MIST) &&
(core_type != CORE_TYPE_MIST2) &&
(core_type != CORE_TYPE_ARCHIE) &&
(core_type != CORE_TYPE_8BIT)) {
return; // no user io for the installed core
}
if((core_type == CORE_TYPE_MIST) ||
(core_type == CORE_TYPE_MIST2)) {
char redirect = tos_get_cdc_control_redirect();
if (core_type == CORE_TYPE_MIST) ikbd_poll();
// check for input data on usart
USART_Poll();
unsigned char c = 0;
// check for incoming serial data. this is directly forwarded to the
// arm rs232 and mixes with debug output. Useful for debugging only of
// e.g. the diagnostic cartridge
if(!pl2303_is_blocked()) {
if (core_type == CORE_TYPE_MIST)
spi_uio_cmd_cont(UIO_SERIAL_IN);
else
spi_uio_cmd_cont(UIO_SIO_IN);
while(spi_in() && !pl2303_is_blocked()) {
c = spi_in();
// if a serial/usb adapter is connected it has precesence over
// any other sink
if(pl2303_present())
pl2303_tx_byte(c);
else {
if(c != 0xff)
putchar(c);
// forward to USB if redirection via USB/CDC enabled
if(redirect == CDC_REDIRECT_RS232)
cdc_control_tx(c);
}
}
DisableIO();
}
// check for incoming parallel/midi data
if((redirect == CDC_REDIRECT_PARALLEL) || (redirect == CDC_REDIRECT_MIDI)) {
spi_uio_cmd_cont((redirect == CDC_REDIRECT_PARALLEL)?UIO_PARALLEL_IN:UIO_MIDI_IN);
// character 0xff is returned if FPGA isn't configured
c = 0;
while(spi_in() && (c!= 0xff)) {
c = spi_in();
cdc_control_tx(c);
}
DisableIO();
// always flush when doing midi to reduce latencies
if(redirect == CDC_REDIRECT_MIDI)
cdc_control_flush();
}
}
// poll db9 joysticks
static int joy0_state = JOY0;
if((*AT91C_PIOA_PDSR & JOY0) != joy0_state) {
joy0_state = *AT91C_PIOA_PDSR & JOY0;
unsigned char joy_map = 0;
if(!(joy0_state & JOY0_UP)) joy_map |= JOY_UP;
if(!(joy0_state & JOY0_DOWN)) joy_map |= JOY_DOWN;
if(!(joy0_state & JOY0_LEFT)) joy_map |= JOY_LEFT;
if(!(joy0_state & JOY0_RIGHT)) joy_map |= JOY_RIGHT;
if(!(joy0_state & JOY0_BTN1)) joy_map |= JOY_BTN1;
if(!(joy0_state & JOY0_BTN2)) joy_map |= JOY_BTN2;
joy_map = virtual_joystick_mapping(0x00db, 0x0000, joy_map);
uint8_t idx = joystick_renumber(0);
if (!user_io_osd_is_visible()) user_io_joystick(idx, joy_map);
StateJoySet(joy_map, mist_cfg.joystick_db9_fixed_index ? idx : hid_get_joysticks()); // send to OSD
virtual_joystick_keyboard(joy_map);
}
static int joy1_state = JOY1;
if((*AT91C_PIOA_PDSR & JOY1) != joy1_state) {
joy1_state = *AT91C_PIOA_PDSR & JOY1;
unsigned char joy_map = 0;
if(!(joy1_state & JOY1_UP)) joy_map |= JOY_UP;
if(!(joy1_state & JOY1_DOWN)) joy_map |= JOY_DOWN;
if(!(joy1_state & JOY1_LEFT)) joy_map |= JOY_LEFT;
if(!(joy1_state & JOY1_RIGHT)) joy_map |= JOY_RIGHT;
if(!(joy1_state & JOY1_BTN1)) joy_map |= JOY_BTN1;
if(!(joy1_state & JOY1_BTN2)) joy_map |= JOY_BTN2;
joy_map = virtual_joystick_mapping(0x00db, 0x0001, joy_map);
uint8_t idx = joystick_renumber(1);
if (!user_io_osd_is_visible()) user_io_joystick(idx, joy_map);
StateJoySet(joy_map, mist_cfg.joystick_db9_fixed_index ? idx : hid_get_joysticks() + 1); // send to OSD
virtual_joystick_keyboard(joy_map);
}
user_io_send_buttons(0);
// mouse movement emulation is continous
if(emu_mode == EMU_MOUSE) {
if(CheckTimer(emu_timer)) {
emu_timer = GetTimer(EMU_MOUSE_FREQ);
if(emu_state & JOY_MOVE) {
unsigned char b = 0;
char x = 0, y = 0;
if((emu_state & (JOY_LEFT | JOY_RIGHT)) == JOY_LEFT) x = -1;
if((emu_state & (JOY_LEFT | JOY_RIGHT)) == JOY_RIGHT) x = +1;
if((emu_state & (JOY_UP | JOY_DOWN)) == JOY_UP) y = -1;
if((emu_state & (JOY_UP | JOY_DOWN)) == JOY_DOWN) y = +1;
if(emu_state & JOY_BTN1) b |= 1;
if(emu_state & JOY_BTN2) b |= 2;
user_io_mouse(0, b, x, y, 0);
}
}
}
if((core_type == CORE_TYPE_MINIMIG) ||
(core_type == CORE_TYPE_MINIMIG2)) {
kbd_fifo_poll();
// frequently check mouse for events
if(CheckTimer(mouse_timer)) {
mouse_timer = GetTimer(MOUSE_FREQ);
// has ps2 mouse data been updated in the meantime
for (char idx = 0; idx < 2; idx ++) {
if(mouse_flags[idx] & 0x80) {
char x, y, z;
// ----- X axis -------
if(mouse_pos[idx][X] < -128) {
x = -128;
mouse_pos[idx][X] += 128;
} else if(mouse_pos[idx][X] > 127) {
x = 127;
mouse_pos[idx][X] -= 127;
} else {
x = mouse_pos[idx][X];
mouse_pos[idx][X] = 0;
}
// ----- Y axis -------
if(mouse_pos[idx][Y] < -128) {
y = (-128);
mouse_pos[idx][Y] += 128;
} else if(mouse_pos[idx][Y] > 127) {
y = 127;
mouse_pos[idx][Y] -= 127;
} else {
y = mouse_pos[idx][Y];
mouse_pos[idx][Y] = 0;
}
// ----- Z axis -------
if(mouse_pos[idx][Z] < -128) {
z = (-128);
mouse_pos[idx][Z] += 128;
} else if(mouse_pos[idx][Z] > 127) {
z = 127;
mouse_pos[idx][Z] -= 127;
} else {
z = mouse_pos[idx][Z];
mouse_pos[idx][Z] = 0;
}
if (!idx) {
// send the first mouse only with the old message
spi_uio_cmd_cont(UIO_MOUSE);
spi8(x);
spi8(y);
spi8(mouse_flags[idx] & 0x03);
DisableIO();
}
spi_uio_cmd_cont(UIO_MOUSE0_EXT + idx);
spi8(x);
spi8(y);
spi8(mouse_flags[idx] & 0x03);
spi8(z);
DisableIO();
// reset flags
mouse_flags[idx] = 0;
}
}
}
}
if((core_type == CORE_TYPE_MIST) ||
(core_type == CORE_TYPE_MIST2)) {
// do some tos specific monitoring here
tos_poll();
}
// serial IO - TODO: merge with MiST2
if(core_type == CORE_TYPE_8BIT) {
unsigned char c = 1, f, p=0;
// check for input data on usart
USART_Poll(); // TODO: currently doesn't send anything for 8BIT
// check for serial data to be sent
// check for incoming serial data. this is directly forwarded to the
// arm rs232 and mixes with debug output.
spi_uio_cmd_cont(UIO_SIO_IN);
// status byte is 1000000A with A=1 if data is available
if((f = spi_in(0)) == 0x81) {
iprintf("\033[1;36m");
// character 0xff is returned if FPGA isn't configured
while((f == 0x81) && (c!= 0xff) && (c != 0x00) && (p < 8)) {
c = spi_in();
if(c != 0xff && c != 0x00)
iprintf("%c", c);
f = spi_in();
p++;
}
iprintf("\033[0m");
}
DisableIO();
}
if((core_type == CORE_TYPE_8BIT) && !strcmp(user_io_get_core_name(), "TGFX16"))
pcecd_poll();
// sd card emulation
if((core_type == CORE_TYPE_8BIT) ||
(core_type == CORE_TYPE_MIST2) ||
(core_type == CORE_TYPE_ARCHIE))
{
uint32_t lba;
uint8_t drive_index;
uint8_t c = user_io_sd_get_status(&lba, &drive_index);
// valid sd commands start with "5x" (old API), or "6x" (new API)
// to avoid problems with cores that don't implement this command
if((c & 0xf0) == 0x50 || (c & 0xf0) == 0x60) {
#if 0
// debug: If the io controller reports and non-sdhc card, then
// the core should never set the sdhc flag
if((c & 3) && !MMC_IsSDHC() && (c & 0x04))
iprintf("WARNING: SDHC access to non-sdhc card\n");
#endif
// check if core requests configuration
if(c & 0x08) {
iprintf("core requests SD config\n");
user_io_sd_set_config();
}
// check if system is trying to access a sdhc card from
// a sd/mmc setup
// check if an SDHC card is inserted
if(MMC_IsSDHC()) {
static char using_sdhc = 1;
// SD request and
if((c & 0x03) && !(c & 0x04)) {
if(using_sdhc) {
// we have not been using sdhc so far?
// -> complain!
ErrorMessage(" This core does not support\n"
" SDHC cards. Using them may\n"
" lead to data corruption.\n\n"
" Please use an SD card <2GB!", 0);
using_sdhc = 0;
}
} else
// SDHC request from core is always ok
using_sdhc = 1;
}
// Write to file/SD Card
if((c & 0x03) == 0x02) {
// only write if the inserted card is not sdhc or
// if the core uses sdhc
if((!MMC_IsSDHC()) || (c & 0x04)) {
uint8_t wr_buf[512];
if(user_io_dip_switch1())
iprintf("SD WR (%d) %d\n", drive_index, lba);
// if we write the sector stored in the read buffer, then
// invalidate the cache
if(buffer_lba == lba && buffer_drive_index == drive_index) {
buffer_lba = 0xffffffff;
}
// Fetch sector data from FPGA ...
spi_uio_cmd_cont(UIO_SECTOR_WR);
spi_block_read(wr_buf);
DisableIO();
// ... and write it to disk
DISKLED_ON;
#if 1
if(sd_image[sd_index(drive_index)].valid) {
if(((f_size(&sd_image[sd_index(drive_index)].file)-1) >> 9) >= lba) {
IDXSeek(&sd_image[sd_index(drive_index)], lba);
IDXWrite(&sd_image[sd_index(drive_index)], wr_buf);
}
} else if (!drive_index && !umounted)
MMC_Write(lba, wr_buf);
#else
hexdump(wr_buf, 512, 0);
#endif
DISKLED_OFF;
}
}
// Read from file/SD Card
if((c & 0x03) == 0x01) {
if(user_io_dip_switch1())
iprintf("SD RD (%d) %d\n", drive_index, lba);
// invalidate cache if it stores data from another drive
if (drive_index != buffer_drive_index)
buffer_lba = 0xffffffff;
// are we using a file as the sd card image?
// (C64 floppy does that ...)
if(buffer_lba != lba) {
DISKLED_ON;
if(sd_image[sd_index(drive_index)].valid) {
if(((f_size(&sd_image[sd_index(drive_index)].file)-1) >> 9) >= lba) {
IDXSeek(&sd_image[sd_index(drive_index)], lba);
IDXRead(&sd_image[sd_index(drive_index)], buffer);
}
} else if (!drive_index && !umounted) {
// sector read
// read sector from sd card if it is not already present in
// the buffer
MMC_Read(lba, buffer);
}
buffer_lba = lba;
DISKLED_OFF;
}
if(buffer_lba == lba) {
// hexdump(buffer, 32, 0);
// data is now stored in buffer. send it to fpga
spi_uio_cmd_cont(UIO_SECTOR_RD);
spi_block_write(buffer);
DisableIO();
// the end of this transfer acknowledges the FPGA internal
// sd card emulation
}
// just load the next sector now, so it may be prefetched
// for the next request already
DISKLED_ON;
if(sd_image[sd_index(drive_index)].valid) {
// but check if it would overrun on the file
if(((f_size(&sd_image[sd_index(drive_index)].file)-1) >> 9) > lba) {
IDXSeek(&sd_image[sd_index(drive_index)], lba+1);
IDXRead(&sd_image[sd_index(drive_index)], buffer);
buffer_lba = lba + 1;
}
} else {
// sector read
// read sector from sd card if it is not already present in
// the buffer
MMC_Read(lba+1, buffer);
buffer_lba = lba+1;
}
buffer_drive_index = drive_index;
DISKLED_OFF;
}
}
}
if((core_type == CORE_TYPE_8BIT) ||
(core_type == CORE_TYPE_MIST2)) {
// frequently check ps2 mouse for events
if(CheckTimer(mouse_timer)) {
mouse_timer = GetTimer(MOUSE_FREQ);
for (char idx=0; idx<2; idx++) {
// has ps2 mouse data been updated in the meantime
if(mouse_flags[idx] & 0x08) {
unsigned char ps2_mouse[4];
// PS2 format:
// YOvfl, XOvfl, dy8, dx8, 1, mbtn, rbtn, lbtn
// dx[7:0]
// dy[7:0]
// 0,0,btn5,btn,dz[3:0]
ps2_mouse[0] = mouse_flags[idx];
// ------ X axis -----------
// store sign bit in first byte
ps2_mouse[0] |= (mouse_pos[idx][X] < 0)?0x10:0x00;
if(mouse_pos[idx][X] < -255) {
// min possible value + overflow flag
ps2_mouse[0] |= 0x40;
ps2_mouse[1] = -128;
} else if(mouse_pos[idx][X] > 255) {
// max possible value + overflow flag
ps2_mouse[0] |= 0x40;
ps2_mouse[1] = 255;
} else
ps2_mouse[1] = mouse_pos[idx][X];
// ------ Y axis -----------
// store sign bit in first byte
ps2_mouse[0] |= (mouse_pos[idx][Y] < 0)?0x20:0x00;
if(mouse_pos[idx][Y] < -255) {
// min possible value + overflow flag
ps2_mouse[0] |= 0x80;
ps2_mouse[2] = -128;
} else if(mouse_pos[idx][Y] > 255) {
// max possible value + overflow flag
ps2_mouse[0] |= 0x80;
ps2_mouse[2] = 255;
} else
ps2_mouse[2] = mouse_pos[idx][Y];
// ------ Z axis -----------
ps2_mouse[3] = 0;
if(mouse_pos[idx][Z] < -8) {
// min possible value
ps2_mouse[3] = -8;
} else if(mouse_pos[idx][Z] > 7) {
// max possible value
ps2_mouse[3] = 7;
} else
ps2_mouse[3] = mouse_pos[idx][Z];
// collect movement info and send at predefined rate
if(!(ps2_mouse[0]==0x08 && ps2_mouse[1]==0 && ps2_mouse[2]==0 && ps2_mouse[3]==0) && user_io_dip_switch1())
iprintf("PS2 MOUSE(%d): %x %d %d %d\n", idx, ps2_mouse[0], ps2_mouse[1], ps2_mouse[2], ps2_mouse[3]);
// old message sends the movements for all mice
spi_uio_cmd_cont(UIO_MOUSE);
spi8(ps2_mouse[0]);
spi8(ps2_mouse[1]);
spi8(ps2_mouse[2]);
DisableIO();
// new message with Intellimouse PS2 message
spi_uio_cmd_cont(UIO_MOUSE0_EXT+idx);
spi8(ps2_mouse[0]);
spi8(ps2_mouse[1]);
spi8(ps2_mouse[2]);
spi8(ps2_mouse[3]);
DisableIO();
// reset counters
mouse_flags[idx] = 0;
mouse_pos[idx][X] = mouse_pos[idx][Y] = mouse_pos[idx][Z] = 0;
}
}
}
}
if(core_type == CORE_TYPE_8BIT)
{
handle_ps2_typematic_repeat();
handle_ps2_kbd_commands();
handle_ps2_mouse_commands();
}
if(core_type == CORE_TYPE_ARCHIE)
archie_poll();
if((core_type == CORE_TYPE_MINIMIG2) ||
(core_type == CORE_TYPE_MIST2) ||
(core_type == CORE_TYPE_ARCHIE) ||
(core_type == CORE_TYPE_8BIT))
{
if(CheckTimer(rtc_timer))
{
rtc_timer = GetTimer(RTC_FREQ);
user_io_send_rtc();
}
}
if(CheckTimer(led_timer))
{
led_timer = GetTimer(LED_FREQ);
uint8_t leds = user_io_kbdled_get_status();
if((leds & KBD_LED_FLAG_MASK) != KBD_LED_FLAG_STATUS) leds = 0;
if((keyboard_leds & KBD_LED_CAPS_MASK) != (leds & KBD_LED_CAPS_MASK))
hid_set_kbd_led(HID_LED_CAPS_LOCK, (leds & KBD_LED_CAPS_CONTROL) ? leds & KBD_LED_CAPS_STATUS : caps_status);
if((keyboard_leds & KBD_LED_NUM_MASK) != (leds & KBD_LED_NUM_MASK))
hid_set_kbd_led(HID_LED_NUM_LOCK, (leds & KBD_LED_NUM_CONTROL) ? leds & KBD_LED_NUM_STATUS : num_status);
if((keyboard_leds & KBD_LED_SCRL_MASK) != (leds & KBD_LED_SCRL_MASK))
hid_set_kbd_led(HID_LED_SCROLL_LOCK, (leds & KBD_LED_SCRL_CONTROL) ? leds & KBD_LED_SCRL_STATUS : scrl_status);
keyboard_leds = leds;
}
// check for long press > 1 sec on menu button
// and toggle scandoubler on/off then
static unsigned long timer = 1;
static unsigned char ypbpr_toggle = 0;
if(user_io_menu_button())
{
if(timer == 1)
timer = GetTimer(1000);
else if(timer != 2)
{
if(CheckTimer(timer))
{
// toggle video mode bit
mist_cfg.scandoubler_disable = !mist_cfg.scandoubler_disable;
timer = 2;
user_io_send_buttons(1);
OsdDisableMenuButton(1);
video_altered |= 1;
video_sd_disable = mist_cfg.scandoubler_disable;
}
}
if(adc_state & 8)
{
if(!ypbpr_toggle)
{
// toggle video mode bit
mist_cfg.ypbpr = !mist_cfg.ypbpr;
timer = 2;
ypbpr_toggle = 1;
user_io_send_buttons(1);
OsdDisableMenuButton(1);
video_altered |= 2;
video_ypbpr = mist_cfg.ypbpr;
}
}
else
{
ypbpr_toggle = 0;
}
}
else
{
timer = 1;
OsdDisableMenuButton(0);
ypbpr_toggle = 0;
}
}
char user_io_dip_switch1() {
return(((adc_state & 2)?1:0) || DEBUG_MODE);
}
char user_io_menu_button() {
return((adc_state & 4)?1:0);
}
char user_io_user_button() {
return((!user_io_menu_button() && (adc_state & 8))?1:0);
}
static void send_keycode(unsigned short code) {
if((core_type == CORE_TYPE_MINIMIG) ||
(core_type == CORE_TYPE_MINIMIG2)) {
// amiga has "break" marker in msb
if(code & BREAK) code = (code & 0xff) | 0x80;
// send immediately if possible
if(CheckTimer(kbd_timer) &&(kbd_fifo_w == kbd_fifo_r) )
kbd_fifo_minimig_send(code);
else
kbd_fifo_enqueue(code);
}
if(core_type == CORE_TYPE_MIST) {
// atari has "break" marker in msb
ikbd_keyboard((code & BREAK) ? ((code & 0xff) | 0x80) : code);
}
if((core_type == CORE_TYPE_8BIT) ||
(core_type == CORE_TYPE_MIST2)) {
// send ps2 keycodes for those cores that prefer ps2
spi_uio_cmd_cont(UIO_KEYBOARD);
// "pause" has a complex code
if((code&0xff) == 0x77) {
// pause does not have a break code
if(!(code & BREAK)) {
// Pause key sends E11477E1F014E077
static const unsigned char c[] = {
0xe1, 0x14, 0x77, 0xe1, 0xf0, 0x14, 0xf0, 0x77, 0x00 };
const unsigned char *p = c;
iprintf("PS2 KBD ");
while(*p) {
iprintf("%x ", *p);
spi8(*p++);
}
iprintf("\n");
}
} else {
if (user_io_dip_switch1()) {
iprintf("PS2 KBD ");
if(code & EXT) iprintf("e0 ");
if(code & BREAK) iprintf("f0 ");
iprintf("%x\n", code & 0xff);
}
if(code & EXT) // prepend extended code flag if required
spi8(0xe0);
if(code & BREAK) // prepend break code if required
if (ps2_kbd_scan_set == 1)
code |= 0x80;
else
spi8(0xf0);
spi8(code & 0xff); // send code itself
}
DisableIO();
}
if(core_type == CORE_TYPE_ARCHIE)
archie_kbd(code);
}
void user_io_mouse(unsigned char idx, unsigned char b, char x, char y, char z) {
// send mouse data as minimig expects it
if((core_type == CORE_TYPE_MINIMIG) ||
(core_type == CORE_TYPE_MINIMIG2)) {
mouse_pos[idx][X] += x;
mouse_pos[idx][Y] += y;
mouse_pos[idx][Z] += z;
mouse_flags[idx] |= 0x80 | (b&3);
}
// 8 bit core expects ps2 like data
if((core_type == CORE_TYPE_8BIT) ||
(core_type == CORE_TYPE_MIST2)) {
mouse_pos[idx][X] += x;
mouse_pos[idx][Y] -= y; // ps2 y axis is reversed over usb
mouse_pos[idx][Z] += z;
mouse_flags[idx] |= 0x08 | (b&7);
}
// send mouse data as mist expects it
if(core_type == CORE_TYPE_MIST)
ikbd_mouse(b, x, y);
if(core_type == CORE_TYPE_ARCHIE)
archie_mouse(b, x, y);
}
// check if this is a key that's supposed to be suppressed
// when emulation is active
static unsigned char is_emu_key(unsigned char c, unsigned alt) {
static const unsigned char m[] = { JOY_RIGHT, JOY_LEFT, JOY_DOWN, JOY_UP };
static const unsigned char m2[] =
{
0x5A, JOY_DOWN,
0x5C, JOY_LEFT,
0x5D, JOY_DOWN,
0x5E, JOY_RIGHT,
0x60, JOY_UP,
0x5F, JOY_BTN1,
0x61, JOY_BTN2
};
if(emu_mode == EMU_NONE) return 0;
if(alt)
{
for(int i=0; i<(sizeof(m2)/sizeof(m2[0])); i +=2) if(c == m2[i]) return m2[i+1];
}
else
{
// direction keys R/L/D/U
if(c >= 0x4f && c <= 0x52) return m[c-0x4f];
}
return 0;
}
/* usb modifer bits:
0 1 2 3 4 5 6 7
LCTRL LSHIFT LALT LGUI RCTRL RSHIFT RALT RGUI
*/
#define EMU_BTN1 (0+(keyrah*4)) // left control
#define EMU_BTN2 (1+(keyrah*4)) // left shift
#define EMU_BTN3 (2+(keyrah*4)) // left alt
#define EMU_BTN4 (3+(keyrah*4)) // left gui (usually windows key)
static unsigned short keycode(unsigned char in) {
if((core_type == CORE_TYPE_MINIMIG) ||
(core_type == CORE_TYPE_MINIMIG2))
return usb2amiga(in);
if(core_type == CORE_TYPE_MIST)
return usb2atari[in];
if(core_type == CORE_TYPE_ARCHIE)
return usb2archie[in];
if((core_type == CORE_TYPE_8BIT) ||
(core_type == CORE_TYPE_MIST2))
return usb2ps2code(in);
return MISS;
}
static void check_reset(unsigned short modifiers, char useKeys)
{
unsigned short combo[] =
{
0x45, // lctrl+lalt+ralt
0x89, // lctrl+lgui+rgui
0x105, // lctrl+lalt+del
};
if((modifiers & ~2)==combo[useKeys])
{
if(modifiers & 2) // with lshift - MiST reset
{
if(mist_cfg.keep_video_mode) video_keep = VIDEO_KEEP_VALUE;
MCUReset(); // HW reset
for(;;);
}
switch(core_type)
{
case CORE_TYPE_MINIMIG:
case CORE_TYPE_MINIMIG2:
OsdReset(RESET_NORMAL);
break;
case CORE_TYPE_8BIT:
kbd_reset = 1;
break;
}
}
else
{
kbd_reset = 0;
}
}
unsigned short modifier_keycode(unsigned char index) {
/* usb modifer bits:
0 1 2 3 4 5 6 7
LCTRL LSHIFT LALT LGUI RCTRL RSHIFT RALT RGUI
*/
if((core_type == CORE_TYPE_MINIMIG) ||
(core_type == CORE_TYPE_MINIMIG2)) {
static const unsigned short amiga_modifier[] =
{ 0x63, 0x60, 0x64, 0x66, 0x63, 0x61, 0x65, 0x67 };
return amiga_modifier[index];
}
if(core_type == CORE_TYPE_MIST) {
static const unsigned short atari_modifier[] =
{ 0x1d, 0x2a, 0x38, MISS, 0x1d, 0x36, 0x38, MISS };
return atari_modifier[index];
}
if((core_type == CORE_TYPE_8BIT) ||
(core_type == CORE_TYPE_MIST2)) {
static const unsigned short ps2_modifier[] =
{ 0x14, 0x12, 0x11, EXT|0x1f, EXT|0x14, 0x59, EXT|0x11, EXT|0x27 };
static const unsigned short ps2_modifier_set1[] =
{ 0x1d, 0x2a, 0x38, MISS, EXT|0x1d, 0x36, EXT|0x38, MISS };
return (ps2_kbd_scan_set == 1) ? ps2_modifier_set1[index] : ps2_modifier[index];
}
if(core_type == CORE_TYPE_ARCHIE) {
static const unsigned short archie_modifier[] =
{ 0x36, 0x4c, 0x5e, MISS, 0x61, 0x58, 0x60, MISS };
return archie_modifier[index];
}
return MISS;
}
void user_io_osd_key_enable(char on) {
iprintf("OSD is now %s\n", on?"visible":"invisible");
osd_is_visible = on;
}
static char key_used_by_osd(unsigned short s) {
// this key is only used to open the OSD and has no keycode
if((s & OSD_OPEN) && !(s & 0xff)) return true;
// no keys are suppressed if the OSD is inactive
if(!osd_is_visible) return false;
// in atari mode eat all keys if the OSD is online,
// else none as it's up to the core to forward keys
// to the OSD
return((core_type == CORE_TYPE_MIST) ||
(core_type == CORE_TYPE_MIST2) ||
(core_type == CORE_TYPE_ARCHIE) ||
(core_type == CORE_TYPE_8BIT));
}
static char kr_fn_table[] =
{
0x54, 0x48, // pause/break
0x55, 0x46, // prnscr
0x50, 0x4a, // home
0x4f, 0x4d, // end
0x52, 0x4b, // pgup
0x51, 0x4e, // pgdown
0x3a, 0x44, // f11
0x3b, 0x45, // f12
0x3c, 0x6c, // EMU_MOUSE
0x3d, 0x6d, // EMU_JOY0
0x3e, 0x6e, // EMU_JOY1
0x3f, 0x6f, // EMU_NONE
//Emulate keypad for A600
0x1E, 0x59, //KP1
0x1F, 0x5A, //KP2
0x20, 0x5B, //KP3
0x21, 0x5C, //KP4
0x22, 0x5D, //KP5
0x23, 0x5E, //KP6
0x24, 0x5F, //KP7
0x25, 0x60, //KP8
0x26, 0x61, //KP9
0x27, 0x62, //KP0
0x2D, 0x56, //KP-
0x2E, 0x57, //KP+
0x31, 0x55, //KP*
0x2F, 0x68, //KP(
0x30, 0x69, //KP)
0x37, 0x63, //KP.
0x28, 0x58 //KP Enter
};
static void keyrah_trans(unsigned char *m, unsigned char *k)
{
static char keyrah_fn_state = 0;
char fn = 0;
char empty = 1;
char rctrl = 0;
int i = 0;
while(i<6)
{
if((k[i] == 0x64) || (k[i] == 0x32))
{
if(k[i] == 0x64) fn = 1;
if(k[i] == 0x32) rctrl = 1;
for(int n = i; n<5; n++) k[n] = k[n+1];
k[5] = 0;
}
else
{
if(k[i]) empty = 0;
i++;
}
}
if(fn)
{
for(i=0; i<6; i++)
{
for(int n = 0; n<(sizeof(kr_fn_table)/(2*sizeof(kr_fn_table[0]))); n++)
{
if(k[i] == kr_fn_table[n*2]) k[i] = kr_fn_table[(n*2)+1];
}
}
}
else
{
// free these keys for core usage
for(i=0; i<6; i++)
{
if(k[i] == 0x53) k[i] = 0x68;
if(k[i] == 0x47) k[i] = 0x69;
if(k[i] == 0x49) k[i] = 0x6b; // workaround!
}
}
*m = rctrl ? (*m) | 0x10 : (*m) & ~0x10;
if(fn)
{
keyrah_fn_state |= 1;
if(*m || !empty) keyrah_fn_state |= 2;
}
else
{
if(keyrah_fn_state == 1)
{
if((core_type == CORE_TYPE_MINIMIG) ||
(core_type == CORE_TYPE_MINIMIG2))
{
send_keycode(KEY_MENU);
send_keycode(BREAK | KEY_MENU);
}
else
{
OsdKeySet(KEY_MENU);
}
}
keyrah_fn_state = 0;
}
}
//Keyrah v2: USB\VID_18D8&PID_0002\A600/A1200_MULTIMEDIA_EXTENSION_VERSION
#define KEYRAH_ID (mist_cfg.keyrah_mode && (((((uint32_t)vid)<<16) | pid) == mist_cfg.keyrah_mode))
void user_io_kbd(unsigned char m, unsigned char *k, uint8_t priority, unsigned short vid, unsigned short pid)
{
// ignore lower priority clears if higher priority key was pressed
if(m==0 && (k[0] + k[1] + k[2] + k[3] + k[4] + k[5])==0)
{
if (priority > latest_keyb_priority) return; // lower number = higher priority
}
latest_keyb_priority = priority; // set for next call
char keyrah = KEYRAH_ID ? 1 : 0;
if(emu_mode == EMU_MOUSE) keyrah <<= 1;
if(keyrah) keyrah_trans(&m, k);
if(mist_cfg.amiga_mod_keys) {
// bit 0 1 2 3 4 5 6 7
// key LCTRL LSHIFT LALT LGUI RCTRL RSHIFT RALT RGUI
// 1 2 4 8 10 20 40 80
unsigned char m_in = m;
// swap RALT/RGUI & LALT/LGUI
m = ((m & 0x40) << 1) | ((m & 0x80) >> 1) | m & 0x20 | m & 0x10 | ((m & 0x8) >> 1) | ((m & 0x4) << 1) | m & 0x2;
// swap CAPSLOCK/LCTRL
for(char i=0;i<6;i++) {
if(k[i] == 0x39) {
m |= 0x1;
k[i] = 0;
}
if(m_in & 0x1) {
if(i<5) {
if(k[i] == 0) {
k[i] = 0x39;
m_in &= ~0x1;
}
} else {
k[i] = 0x39;
}
}
}
}
unsigned short reset_m = m;
for(char i=0;i<6;i++) if(k[i] == 0x4c) reset_m |= 0x100;
check_reset(reset_m, KEYRAH_ID ? 1 : mist_cfg.reset_combo);
if( (core_type == CORE_TYPE_MINIMIG) ||
(core_type == CORE_TYPE_MINIMIG2) ||
(core_type == CORE_TYPE_MIST) ||
(core_type == CORE_TYPE_MIST2) ||
(core_type == CORE_TYPE_ARCHIE) ||
(core_type == CORE_TYPE_8BIT))
{
//iprintf("KBD: %d\n", m);
//hexdump(k, 6, 0);
char keycodes[6] = { 0,0,0,0,0,0 };
uint16_t keycodes_ps2[6] = { 0,0,0,0,0,0 };
char i, j;
// remap keycodes if requested
for(i=0;(i<6) && k[i];i++)
{
for(j=0;j<MAX_REMAP;j++)
{
if(key_remap_table[j][0] == k[i])
{
k[i] = key_remap_table[j][1];
break;
}
}
}
// remap modifiers to each other if requested
// bit 0 1 2 3 4 5 6 7
// key LCTRL LSHIFT LALT LGUI RCTRL RSHIFT RALT RGUI
if(false)
{ // (disabled until we configure it via INI)
uint8_t default_mod_mapping [8] =
{
0x1,
0x2,
0x4,
0x8,
0x10,
0x20,
0x40,
0x80
};
uint8_t modifiers = 0;
for(i=0; i<8; i++) if (m & (0x01<<i)) modifiers |= default_mod_mapping[i];
m = modifiers;
}
// modifier keys are used as buttons in emu mode
if(emu_mode != EMU_NONE && !osd_is_visible)
{
char last_btn = emu_state & (JOY_BTN1 | JOY_BTN2 | JOY_BTN3 | JOY_BTN4);
if(keyrah!=2)
{
if(m & (1<<EMU_BTN1)) emu_state |= JOY_BTN1;
else emu_state &= ~JOY_BTN1;
if(m & (1<<EMU_BTN2)) emu_state |= JOY_BTN2;
else emu_state &= ~JOY_BTN2;
}
if(m & (1<<EMU_BTN3)) emu_state |= JOY_BTN3;
else emu_state &= ~JOY_BTN3;
if(m & (1<<EMU_BTN4)) emu_state |= JOY_BTN4;
else emu_state &= ~JOY_BTN4;
// check if state of mouse buttons has changed
// (on a mouse only two buttons are supported)
if((last_btn & (JOY_BTN1 | JOY_BTN2)) != (emu_state & (JOY_BTN1 | JOY_BTN2)))
{
if(emu_mode == EMU_MOUSE)
{
unsigned char b;
if(emu_state & JOY_BTN1) b |= 1;
if(emu_state & JOY_BTN2) b |= 2;
user_io_mouse(0, b, 0, 0, 0);
}
}
// check if state of joystick buttons has changed
if(last_btn != (emu_state & (JOY_BTN1|JOY_BTN2|JOY_BTN3|JOY_BTN4))) {
user_io_joystick_emu();
}
}
// handle modifier keys
if(m != modifier && !osd_is_visible)
{
for(i=0;i<8;i++)
{
// Do we have a downstroke on a modifier key?
if((m & (1<<i)) && !(modifier & (1<<i)))
{
// shift keys are used for mouse joystick emulation in emu mode
if(((i != EMU_BTN1) && (i != EMU_BTN2) && (i != EMU_BTN3) && (i != EMU_BTN4)) || (emu_mode == EMU_NONE))
{
if(modifier_keycode(i) != MISS) send_keycode(modifier_keycode(i));
}
}
if(!(m & (1<<i)) && (modifier & (1<<i)))
{
if(((i != EMU_BTN1) && (i != EMU_BTN2) && (i != EMU_BTN3) && (i != EMU_BTN4)) || (emu_mode == EMU_NONE))
{
if(modifier_keycode(i) != MISS) send_keycode(BREAK | modifier_keycode(i));
}
}
}
modifier = m;
}
// check if there are keys in the pressed list which aren't
// reported anymore
for(i=0;i<6;i++)
{
unsigned short code = keycode(pressed[i]);
if(pressed[i] && code != MISS)
{
if (user_io_dip_switch1())
iprintf("key 0x%X break: 0x%X\n", pressed[i], code);
for(j=0;j<6 && pressed[i] != k[j];j++);
// don't send break for caps lock
if(j == 6)
{
// If OSD is visible, then all keys are sent into the OSD
// using Amiga key codes since the OSD itself uses Amiga key codes
// for historical reasons. If the OSD is invisble then only
// those keys marked for OSD in the core specific table are
// sent for OSD handling.
if(code & OSD_OPEN)
{
OsdKeySet(0x80 | KEY_MENU);
}
else
{
// special OSD key handled internally
if(osd_is_visible) OsdKeySet(0x80 | usb2amiga(pressed[i]));
}
if(!key_used_by_osd(code))
{
// iprintf("Key is not used by OSD\n");
if(is_emu_key(pressed[i], keyrah) && !osd_is_visible)
{
emu_state &= ~is_emu_key(pressed[i], keyrah);
user_io_joystick_emu();
if(keyrah == 2)
{
unsigned char b;
if(emu_state & JOY_BTN1) b |= 1;
if(emu_state & JOY_BTN2) b |= 2;
user_io_mouse(0, b, 0, 0, 0);
}
}
else if(!(code & CAPS_LOCK_TOGGLE) && !(code & NUM_LOCK_TOGGLE))
{
send_keycode(BREAK | code);
}
}
}
}
}
for(i=0;i<6;i++)
{
unsigned short code = keycode(k[i]);
if(k[i] && (k[i] <= KEYCODE_MAX) && code != MISS)
{
// check if this key is already in the list of pressed keys
for(j=0;j<6 && k[i] != pressed[j];j++);
if(j == 6)
{
if (user_io_dip_switch1())
iprintf("key 0x%X make: 0x%X\n", k[i], code);
// If OSD is visible, then all keys are sent into the OSD
// using Amiga key codes since the OSD itself uses Amiga key codes
// for historical reasons. If the OSD is invisble then only
// those keys marked for OSD in the core specific table are
// sent for OSD handling.
if(code & OSD_OPEN)
{
OsdKeySet(KEY_MENU);
}
else
{
// special OSD key handled internally
if(osd_is_visible) OsdKeySet(usb2amiga(k[i]));
}
// no further processing of any key that is currently
// redirected to the OSD
if(!key_used_by_osd(code))
{
// iprintf("Key is not used by OSD\n");
if(is_emu_key(k[i], keyrah) && !osd_is_visible)
{
emu_state |= is_emu_key(k[i], keyrah);
user_io_joystick_emu();
if(keyrah == 2)
{
unsigned char b;
if(emu_state & JOY_BTN1) b |= 1;
if(emu_state & JOY_BTN2) b |= 2;
user_io_mouse(0, b, 0, 0, 0);
}
}
else if(!(code & CAPS_LOCK_TOGGLE)&& !(code & NUM_LOCK_TOGGLE))
{
send_keycode(code);
}
else
{
if(code & CAPS_LOCK_TOGGLE)
{
// send alternating make and break codes for caps lock
send_keycode((code & 0xff) | (caps_lock_toggle?BREAK:0));
caps_lock_toggle = !caps_lock_toggle;
set_kbd_led(HID_LED_CAPS_LOCK, caps_lock_toggle);
}
if(code & NUM_LOCK_TOGGLE)
{
// num lock has four states indicated by leds:
// all off: normal
// num lock on, scroll lock on: mouse emu
// num lock on, scroll lock off: joy0 emu
// num lock off, scroll lock on: joy1 emu
if(emu_mode == EMU_MOUSE) emu_timer = GetTimer(EMU_MOUSE_FREQ);
switch(code ^ NUM_LOCK_TOGGLE)
{
case 1:
emu_mode = EMU_MOUSE;
break;
case 2:
emu_mode = EMU_JOY0;
break;
case 3:
emu_mode = EMU_JOY1;
break;
case 4:
emu_mode = EMU_NONE;
break;
default:
emu_mode = (emu_mode+1)&3;
break;
}
if(emu_mode == EMU_MOUSE || emu_mode == EMU_JOY0) set_kbd_led(HID_LED_NUM_LOCK, true);
else set_kbd_led(HID_LED_NUM_LOCK, false);
if(emu_mode == EMU_MOUSE || emu_mode == EMU_JOY1) set_kbd_led(HID_LED_SCROLL_LOCK, true);
else set_kbd_led(HID_LED_SCROLL_LOCK, false);
}
}
}
}
}
}
for(i=0;i<6;i++)
{
pressed[i] = k[i];
keycodes[i] = pressed[i]; // send raw USB code, not amiga - keycode(pressed[i]);
keycodes_ps2[i] = keycode(pressed[i]);
}
StateKeyboardSet(m, keycodes, keycodes_ps2);
// set the typematic timer to the first delay
if (core_type == CORE_TYPE_8BIT)
ps2_typematic_timer = GetTimer((((ps2_typematic_rate & 0x60)>>5)+1)*250);
}
}
/* translates a USB modifiers into scancodes */
void add_modifiers(uint8_t mod, uint16_t* keys_ps2)
{
uint8_t i;
uint8_t offset = 1;
uint8_t index = 0;
while(offset)
{
if(mod&offset)
{
uint16_t ps2_value = modifier_keycode(index);
if(ps2_value != MISS)
{
if(ps2_value & EXT) ps2_value = (0xE000 | (ps2_value & 0xFF));
for(i=0; i<4; i++)
{
if(keys_ps2[i]==0)
{
keys_ps2[i] = ps2_value;
break;
}
}
}
}
offset <<= 1;
index++;
}
}
void user_io_key_remap(char *s) {
// s is a string containing two comma separated hex numbers
if((strlen(s) != 5) && (s[2]!=',')) {
ini_parser_debugf("malformed entry %s", s);
return;
}
char i;
for(i=0;i<MAX_REMAP;i++) {
if(!key_remap_table[i][0]) {
key_remap_table[i][0] = strtol(s, NULL, 16);
key_remap_table[i][1] = strtol(s+3, NULL, 16);
ini_parser_debugf("key remap entry %d = %02x,%02x",
i, key_remap_table[i][0], key_remap_table[i][1]);
return;
}
}
}
unsigned char user_io_ext_idx(const char *name, const char* ext) {
unsigned char idx = 0;
int len = strlen(ext);
const char *nameext = GetExtension(name);
if (!nameext) return 0;
while((len>3) && *ext) {
if(!_strnicmp(nameext,ext,3)) return idx;
if(strlen(ext)<=3) break;
idx++;
ext +=3;
}
return 0;
}
void user_io_change_into_core_dir(void) {
if (arc_get_dirname()[0]) {
strcpy(s, "/");
strcat(s, arc_get_dirname());
} else {
user_io_create_config_name(s, 0, CONFIG_ROOT);
}
// try to change into subdir named after the core
iprintf("Trying to open work dir \"%s\"\n", s);
ChangeDirectoryName(s);
}